Legiones Astartes – Thunderhawk Gunship
- Thunderhawk Gunship 685 Points
UNIT COMPOSITION: 1 THUNDERHAWK GUNSHIP
The Thunderhawk Gunship was a development of the later Great Crusade, intended to bridge the gap in size and capacity between smaller designs such as the Storm Eagle and the larger and more costly Stormbird. Designed to operate in atmosphere and void space, it combines the roles of orbital troop lander and heavy’ gunship, and proved a highly successful addition to a Legion’s fleet. With the outbreak of the wars of the Horus Heresy, both sides ramped up production of Thunderhawks to meet the ongoing demands of the war.
| Armour | Transport Capacity | ||||||
| M | BS | Front | Side | Rear | HP | ||
| Thunderhawk (⌀No official base size) | |||||||
| Thunderhawk (⌀No official base size) | 18 | 4 | 13 | 13 | 13 | 18 | 32 |
WARGEAR
- Centreline Mounted turbo-laser destructor
- Two Turret Mounted twin heavy bolters
- Two Sponson Mounted twin heavy bolters
- Two Hull (Front) Mounted lascannon
- Six Centreline Mounted hellstrike missiles
TRAITS
- [Allegiance]
- [Legiones Astartes]
- Smokescreen
ACCESS POINTS
- If this Model does not have a base, it is considered to have Access Points on all Facings.
SPECIAL RULES
Thunderhawk Transport Bay
Smaller than the ubiquitous Stormbird, the Thunderhawk was designed to deliver smaller strike forces into the heart of a battle.
A Thunderhawk Gunship can transport larger Models as well as Infantry.Models of any Type other than Vehicle may Embark on a Model with this Special Rule, however only 2 Models may be Embarked that do not have the Infantry or Paragon Type, and such a Model may not have any variant of the Bulky (X) Special Rule where the value of X is greater than 6.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.
In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.
While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)
Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.
Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.
Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.
Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.
If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
The [Allegiance] Trait is used in the following Legiones Astartes datasheets:
The [Legiones Astartes] Trait is used in the following Legiones Astartes datasheets:
Infantry
Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.
Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Limited (X)
Some weapons carry only a severely limited stock of munitions. Often intended as weapons of last resort, used at the correct point they can turn the tide of battle.
A Weapon with the Limited (X) Special Rule can only be used to attack a limited number of times per Battle.A Weapon with the Limited (X) Special Rule may only be used to make attacks as part of a Shooting Attack or Combat a number of times equal to the value of X attached to the specific variant of the Special Rule. Each time it is used to make attacks, the Firepower Characteristic or Attacks Modifier Characteristic of the Weapon is not modified by this Special Rule, only the number of times it may be selected in a given Battle.
Heavy (X)
Some weapons are so heavy that, while they can be fired on the move, are more powerful when properly braced and made ready before shooting. Warriors on the battlefield must use their judgement to decide when speed is required and when the full firepower of their arsenal must be unleashed.
Weapons with the Heavy (X) Special Rule gain +1 to a Characteristic when Stationary.When making a Shooting Attack with a Weapon that has the Heavy (X) Special Rule, a modifier of +1 is added to a Characteristic if the Model with that Weapon is part of a Unit that remained Stationary in the Controlling Player’s previous Movement Phase. If the Characteristic listed is AP, then instead it improves the AP by one Step (see the Rules for modifying Saves and AP). The value of X in the specific variant of the Heavy (X) Special Rule determines which Characteristic gains the +1 modifier.
Army List
Datasheets collatedFaction Rules
• Wargear
Paragon
Mightiest of all the Emperor’s creations and the greatest warriors and generals of their age, the Primarchs of the Space Marine Legions epitomise the dark ages of the Horus Heresy. These colossi of war were powerful beyond the capabilities of any mortal warrior or steel-forged automata - for their only equal was another of their own kind.
The following Rules apply to all Models with the Paragon Type:- Any Hits inflicted by a Model with the Paragon Type, as part of either Shooting Attacks or in close combat, are allocated by the attacking Model’s Controlling Player and not the Controlling Player of the Target Unit.
- Models with the Paragon Type may join and leave a Unit that includes Models with the Infantry Type, and Models with the Infantry Type may join and leave a Unit that includes one or more Models with the Paragon Type.
- Models with the Paragon Type may Embark and Disembark upon Models with the Transport Sub-Type.
- A Model with the Paragon Type may Issue and Accept Challenges.
- The Controlling Player of a Unit that includes one or more Models with the Paragon Type may use the Characteristics of one of those Models to resolve any Characteristic Checks made for that Unit.
- In Step 1 of the Resolution Sub-Phase, when deciding how many Models a Player controls in a Combat, a Model with the Paragon Type counts as a number of Models equal to that Model’s Base Wounds Value.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)
Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.
Models with the Bulky (X) Special Rule take up more space on Transport Models.A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Armourbane
Heavy beams and armour-piercing cannon rarely inflict superficial damage, but always blast and break the hull of their target. Such weapons are superior tank killers, their sheer power prized over lesser weapons when the objective is to apply maximum damage without concern for finesse.
A Weapon with the Armourbane Special Rule counts Glancing Hits as Penetrating Hits.When making Armour Penetration Tests for an attack with this Special Rule, a result that is equal to, or greater than, the target Armour Value inflicts a Penetrating Hit. A Weapon with this Special Rule can never inflict a Glancing Hit, and any Rule that would force them to do so instead inflicts a Penetrating Hit.
Armour (Front, Side, Rear) – This Characteristic will often be presented with various separate Sub-Characteristics, one for each of the Model’s Facings (see the Vehicles and Damage). Each of these Sub-Characteristics is used to determine the effect of a Model’s armour and how hard it is to defeat. When any Armour Sub-Characteristic reaches 0, then any Hit on that facing will result in an automatic Penetrating Hit without any Dice being rolled (if the Hit could have triggered a variable Special Rule, then that Rule is considered to automatically activate as part of the Hit).
Hull Points (HP) – The Hull Points Characteristic is primarily used to determine a Model with the Vehicle Type’s capacity for receiving damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Hull Points Characteristic is reduced to 0 that Model is removed from play as a Casualty, see the Rules for Destroyed Vehicles here.
Defensive Weapons – All Weapons on a Model with the Vehicle Type that have a Strength Characteristic of 6 or less are Defensive Weapons. Other Weapons may also be specifically designated as Defensive Weapons on their profile. When a Player chooses to have a Model with the Vehicle Type attack multiple different Units in the same Shooting Phase, Defensive Weapons do not have to make their attacks as Snap Shots.
The Smokescreen (see Smokescreen Advanced Reaction) Trait is used in the following Legiones Astartes datasheets:
Transport
From armoured transports, to fleet orbital shuttles and even more esoteric modes of travel, mounting infantry atop faster moving transports is an ancient tactic. The best transports offer a safe haven for fragile infantry as well as a means to traverse even the most difficult terrain at speed.
All Models with the Transport Sub-Type are bound by a set of Rules regarding how they operate:- All Models with the Transport Sub-Type have a Transport Capacity Characteristic, which determines the maximum number of Models that can Embark upon it - one Model per point of Transport Capacity, unless another Rule states otherwise.
- Only Models with the Infantry or Paragon Type may Embark or Disembark upon a Model with the Transport Sub-Type.
- A Unit may only Embark on a Model with the Transport Sub-Type if all Models in the Embarking Unit have the same Faction as the Model with the Transport Sub-Type.
- A Model with the Transport Sub-Type may only have a single Unit Embarked upon it at any one time (Models with the Specialist Sub-Type, Command Sub-Type or Paragon Type that have joined a Unit are considered part of that Unit and may Embark alongside it).
- A Unit may not be partially Embarked on a Model with the Transport Sub-Type - either all Models or no Models in a Unit may be Embarked on a given Model.
- If a Model with the Transport Sub-Type has a Unit Embarked upon it, the Embarked Unit is not considered part of the same Unit. The two remain separate Units for all purposes.
Access Points
Each Model with the Transport Sub-Type will have a number of Access Points defined in its entry. These are the doors, ramps and hatches that passengers use to get in and out of the Vehicle. All Access Points are defined as being within a specific Facing, corresponding to one of the four Armour Facings that most Models with the Vehicle Type have - for example, a Rhino has one Rear Access Point, and Access Points on both Side Facings. An Access Point must be physically represented on the noted Armour Facing, and when Models are Embarking or Disembarking using that Access Point they count all points on that Armour Facing as an Access Point. Where a Model has two Side Access Points, this indicates one Access Point on each Side Facing. If a Model has an Access Point on only one Side Facing, then this will be noted as Side (Left) Access Point or Side (Right) Access Point to indicate which Facing the Access Point is present on.
Models that do not have the Vehicle Type but that do have the Transport Sub-Type and a Base, count the entirety of the edge of their Base as an Access Point, regardless of the facing of any Access Points they have. Likewise, Models with the Flyer Sub-Type that are mounted on Flying Bases also count the entirety of the edge of their Base as an Access Point.
If any Models in the Embarking Unit are more than 2" from a Facing on the Transport Model that has an Access Point, then no Models can Embark and the Unit remains in play. If all Models in the Embarking Unit are within 2" of a Facing on the Model with the Transport Sub-Type that has an Access Point, then all Models in the Unit are removed from the Battlefield. Players may find it useful to mark or otherwise note which Unit has Embarked on which Model with the Transport Sub-Type and this information should be declared to all Players.Models that do not have the Vehicle Type but that do have the Transport Sub-Type and a Base, count the entirety of the edge of their Base as an Access Point, regardless of the facing of any Access Points they have. Likewise, Models with the Flyer Sub-Type that are mounted on Flying Bases also count the entirety of the edge of their Base as an Access Point.
The entire process of Embarkation is resolved during the activation of the Embarking Unit during the Move SubPhase, and as such does not interfere with the activation and movement of the Model the Unit Embarks on. A Model may have Units Embark on it after it has been activated and moved, and also may be activated (if it has not already been activated) and then moved during the Move Sub-Phase after another Unit has Embarked on it.
Hull (Arc) Mounted – Hull (Arc) Mounted Weapons will always specify a single Firing Arc and may only attack targets in that Firing Arc. The different Hull arcs are: Front, Rear, Left and Right. Some Units may specify Side as an arc - this means both Left and Right arcs.
For example, a Land Raider Carrier has a Hull (Front) Mounted twin heavy bolter - this Weapon may only attack targets in the Front Firing Arc.
For example, a Land Raider Carrier has a Hull (Front) Mounted twin heavy bolter - this Weapon may only attack targets in the Front Firing Arc.
Turret Mounted – Turret Mounted Weapons may attack targets in any Hull arc (Front, Left, Right or Rear) without restriction.
Twin heavy bolter
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Twin heavy bolter | |||||||
| Twin heavy bolter | 36 | 6 | 5 | 4 | 1 | - | Bolt |
Centreline Mounted – Centreline Mounted Weapons may only attack targets in the Centreline Firing Arc.
Sponson Mounted – Sponson Mounted Weapons are usually in pairs, one on each side of a Vehicle (the Model’s profile will note if this is not the case) and may attack targets in the appropriate Sponson Firing Arc (either left or right). Sponson Mounted Weapons are always counted as Defensive Weapons regardless of the Weapon’s Characteristics.
The Flyer Sub-Type
The following Rules are exceptions to the Core Rules that always apply to a Model with the Flyer Sub-Type at all times during a Horus Heresy Battle:- Whilst on the Battlefield, a Model with the Flyer Sub-Type does not block Line of Sight or the Movement of any Model.
- When moving a Model with the Flyer Sub-Type, ignore all Terrain effects and Rules. However, a Model with the Flyer Sub-Type may still not end a move in or on Impassable Terrain, a Terrain Feature or a Building.
- Models with the Flyer Sub-Type may move through Models with the Vehicle Type, but never inflict Hits on enemy Units they move through and are never eligible to be the Target of the Death or Glory Advanced Reaction.
- No Model of any kind may join a Unit that includes a Model with the Flyer Sub-Type.
- A Model with the Flyer Sub-Type can never gain any Tactical Statuses and ignores any Rules that would force it to do so.
- A Model with the Flyer Sub-Type may never be Locked in Combat or attacked in any way during the Assault Phase and may not be targeted by attacks made using a Melee Weapon.
- A Model with the Flyer Sub-Type may never make a Reaction of any kind, unless that Reaction specifically states it may be made by Models with the Flyer Sub-Type - but can be targeted by Reactions.
- When a Player is instructed to roll on the Vehicle Damage Table for a Model with this Sub-Type, no roll is made. Instead, the Model loses a single Hull Point.
Embarking
Embarking covers the Rules for moving Units ‘into’ transports.When selected during the Move Sub-Phase of the Movement Phase, the Controlling Player may have a Unit Embark on a friendly Model that has the Transport Sub-Type. The Model upon which the Unit is attempting to Embark must have a Transport Capacity high enough for all Models in the Unit to Embark - if the Transport Capacity is not high enough then any attempt to Embark is automatically unsuccessful.
To Embark upon a Model with the Transport Sub-Type, a Unit must end or begin the Move Sub-Phase with all Models in the Unit within 2" of any point on a Facing on that Model that has an Access Point.
Hellstrike missile
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Hellstrike missile | |||||||
| Hellstrike missile | 48 | 1 | 9 | 3 | 3 | Armourbane, Limited (1) | Guided Missile |
Lascannon
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Lascannon | |||||||
| Lascannon | 48 | 1 | 9 | 2 | 1 | Heavy (D), Armourbane | Las |
This datasheet has Lords of War Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:
Super-heavy
From the lumbering Baneblade tanks of the Imperial Army to the destructive power of the Legiones Astartes Falchion, all of the war machines that fall into this category are huge armour-clad constructions that each wield enough firepower to destroy an entire army.
The following Rules apply to all Models with the Super-heavy Sub-Type:
- Models with this Sub-Type are not affected in any way by Difficult Terrain or Dangerous Terrain, but may still neither pass through nor end their move in Impassable Terrain.
- A Model with this Sub-Type always gains any benefits for having remained Stationary when making Shooting Attacks, regardless of whether the Model moved in the preceding Movement Phase or the distance moved. This does not count if the Model has Rushed in the Preceding Movement Phase.
- When making multiple Shooting Attacks in the same Shooting Phase, a Model with this Sub-Type does not have to make all attacks as Snap Shots.
- A Model with this Sub-Type may only make Reactions in response to actions undertaken by Units that contain one or more Models with the Paragon Type, Super-heavy Sub-Type, Knight Sub-Type* or Titan Sub-Type*.
- When a Player is instructed to roll on the Vehicle Damage Table for a Model with this Sub-Type, no roll is made. Instead, the Model loses a single Hull Point.
- If a Model with this Sub-Type has a Transport Capacity, then it may transport any number of Units, so long as the number of Models in the transported Units does not exceed the Vehicle’s Transport Capacity.
*See Liber Questoris for more details on these Unit Sub-Types.
Turbo-laser destructor
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Turbo-laser destructor | |||||||
| Turbo-laser destructor | 96 | 1 | 12 | 2 | 6 | Blast (3"), Armourbane | Las |
Thunderhawk Transport Bay
Smaller than the ubiquitous Stormbird, the Thunderhawk was designed to deliver smaller strike forces into the heart of a battle.
A Thunderhawk Gunship can transport larger Models as well as Infantry.Models of any Type other than Vehicle may Embark on a Model with this Special Rule, however only 2 Models may be Embarked that do not have the Infantry or Paragon Type, and such a Model may not have any variant of the Bulky (X) Special Rule where the value of X is greater than 6.