Datasheets
Army List
Datasheets collated
Transport
• Drop Pod
• Rhino
• Termite
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Legiones Astartes – Tyrant Siege Terminator Squad
[  ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
  • Tyrant Siege Terminator Squad 300 Points
UNIT COMPOSITION: 1 SIEGE MASTER, 4 TYRANTS
• May include up to 5 additional Tyrants at +55 Points per Model.

Clad in Cataphractii plate and unleashing hails ofSwarmer or Breaker missiles from their armour mounted rocket launchers, these implacable warriors are fortress-breakers of unparalleled skill. The bleak spectacle of these warriors upon the battlefield, surmounting any obstacle before them, became synonymous with Perturabo’s wrath unleashed. Recruited from amongst the most battle-hardened Iron Warriors, Tyrant Siege Terminators are expected to brave the most ferocious enemy fire without regard for their own survival - even more so than others of their grim brotherhood they understand the mathematics of war.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Siege Master (⌀40mm) 9 8 7 7
Siege Master (⌀40mm) 6 4 4 4 5 2 4 2 9 8 7 7 2+ 4+
Tyrant (⌀40mm) 8 8 7 7
Tyrant (⌀40mm) 6 4 4 4 5 2 4 2 8 8 7 7 2+ 4+
WARGEAR
  • Tyrant Rocket Launcher
  • Combi-bolter
  • Power fist
TRAITS
  • [Allegiance]
  • Iron Warriors
SPECIAL RULES
  • Bulky (2)
  • Implacable Advance
  • Slow and Purposeful
  • Firing Protocols (2)
  • Support Unit (1)
TYPE
  • Siege Master: Infantry (Sergeant, Heavy)
  • Tyrant: Infantry (Heavy)
OPTIONS
  • Any Model in this Unit may have its combi-bolter exchanged for one item from the Legion Combi-weapons list.
  • The Siege Master in this Unit may have one omni-scope selected for it for +10 Points.
WARGEAR

Tyrant Rocket Launcher

A compact rocket system, based on the design of the cyclone missile launcher, the Tyrant launcher is capable of delivering overwhelming salvos of unguided rockets. The Iron Warriors value the sheer firepower of the Tyrant system over the more controlled destruction of the larger cyclone system.

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Tyrant Rocket Launcher
Tyrant Rocket Launcher
- Swarmer
- Swarmer
48
3
5
6
1
Heavy (FP), Breaching (6+)
Missile
- Breaker
- Breaker
48
1
9
3
1
Heavy (D), Armourbane
Missile

Omni-scope

A sophisticated cogitator-slaved optical scanner integrated into the modified Terminator armour of the squad’s Siege Master, the omni-scope allows for precise targeting solutions to be formulated in the blink of an eye. With weapons slaved to this device, the Tyrants of the Iron Warriors are deadly combatants on any battlefield.

When a Shooting Attack made by a Unit that includes any Models with an omni-scope inflicts any Hits (excluding Hits from attacks made as Snap Shots), Cover Saving Throws cannot be made against those Hits.

This datasheet has Heavy Assault Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:

Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Heavy (X)

Some weapons are so heavy that, while they can be fired on the move, are more powerful when properly braced and made ready before shooting. Warriors on the battlefield must use their judgement to decide when speed is required and when the full firepower of their arsenal must be unleashed.

Weapons with the Heavy (X) Special Rule gain +1 to a Characteristic when Stationary.

When making a Shooting Attack with a Weapon that has the Heavy (X) Special Rule, a modifier of +1 is added to a Characteristic if the Model with that Weapon is part of a Unit that remained Stationary in the Controlling Player’s previous Movement Phase. If the Characteristic listed is AP, then instead it improves the AP by one Step (see the Rules for modifying Saves and AP). The value of X in the specific variant of the Heavy (X) Special Rule determines which Characteristic gains the +1 modifier.
Breaching (X)

Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.

With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.

When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.

A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Armourbane

Heavy beams and armour-piercing cannon rarely inflict superficial damage, but always blast and break the hull of their target. Such weapons are superior tank killers, their sheer power prized over lesser weapons when the objective is to apply maximum damage without concern for finesse.

A Weapon with the Armourbane Special Rule counts Glancing Hits as Penetrating Hits.

When making Armour Penetration Tests for an attack with this Special Rule, a result that is equal to, or greater than, the target Armour Value inflicts a Penetrating Hit. A Weapon with this Special Rule can never inflict a Glancing Hit, and any Rule that would force them to do so instead inflicts a Penetrating Hit.

Tyrant Rocket Launcher

A compact rocket system, based on the design of the cyclone missile launcher, the Tyrant launcher is capable of delivering overwhelming salvos of unguided rockets. The Iron Warriors value the sheer firepower of the Tyrant system over the more controlled destruction of the larger cyclone system.

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Tyrant Rocket Launcher
Tyrant Rocket Launcher
- Swarmer
- Swarmer
48
3
5
6
1
Heavy (FP), Breaching (6+)
Missile
- Breaker
- Breaker
48
1
9
3
1
Heavy (D), Armourbane
Missile
Combi-bolter

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Combi-bolter
Combi-bolter
24
4
4
5
1
-
Bolt

Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.

Power fist

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Power fist
Power fist
-3
A
+4
2
2
-
Power

The [Allegiance] Trait is used in the following Legiones Astartes datasheets:

The Iron Warriors Trait is used in the following Legiones Astartes datasheets:

Warlord
• Perturabo
Transport
• Rhino
• Termite
Infantry

Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.

Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.
Sergeant

The humble sergeant stands as one of the greatest weapons in the arsenals of any army. Skilled in war and in leadership, each sergeant is the beating heart of their unit and the cornerstone upon which victory is built.

The following Rules apply to all Models with the Sergeant Sub-Type:
  • The Controlling Player of a Unit that includes one or more Models with the Sergeant Sub-Type may use the Characteristics of one of those Models to resolve any Characteristic Check made for that Unit.
Heavy

Intended to break the lines of the foe or to hold the most dangerous of positions, heavy troops trade speed and manoeuvrability for indomitable toughness and stubborn tenacity.

The following Rules apply to all Models with the Heavy Sub-Type:
  • A Unit that includes only Models with the Heavy Sub-Type gains a bonus of +1 to its Cool Characteristic for Checks to avoid gaining Tactical Statuses.
  • A Unit that includes any Models with the Heavy Sub-Type may not Rush.
  • A Unit that includes any Models with the Heavy Sub-Type only uses its Movement Characteristic to determine how far it moves as part of a Set-up Move, not Movement and Initiative totalled.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Implacable Advance

The wargear of many Legiones Astartes warriors and war machines incorporates a variety of targeting and stabilisation systems, enabling larger weaponry to be brought to bear even at close ranges.

Models with this Special Rule can make Volley Attacks with other Weapons.

The Controlling Player of a Model with this Special Rule treats all Ranged Weapons such a Model has that do not have any variant of the Heavy (X) Special Rule or Ordnance (X) Special Rule as having the Assault Trait.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
Pursue – Roll a single Dice for each Unit that has been chosen to Pursue. Each Model in a Pursuing Unit must move a number of inches equal to their Initiative Characteristic, added to the result of the Dice rolled for the Unit that Model is part of, directly towards the nearest enemy Model from a Unit that has made a Fall Back Move from the selected Combat. If any Model from the Unit that is Pursuing ends its move in Base Contact with an enemy Model, then it is considered to have made a successful Charge and is Locked in Combat with the Unit that includes that enemy Model.

In the example pictured above the Unit marked in green has beaten the Unit marked in yellow. The yellow marked Unit has Fallen Back, while the green marked Unit will Pursue. The red marked Unit was not a part of the Combat. All Models in the green marked Unit must move directly towards Models in the yellow marked Unit when making their Pursue Move and cannot move towards Models in the red Marked Unit even though it is closer.
Slow and Purposeful

Many warriors are steady hut sure, slow to advance but no less deadly for it.

Models with this Special Rule cannot Pursue fleeing enemy Units.

In Step 4 of the Resolution Sub-Phase, a Player that has won Combat cannot choose for a Unit that includes any Models with this Special Rule to Pursue, and must instead select another eligible option for that Unit.
Firing Protocols (X)

By skill, technological aid or sheer brute strength, this warrior is capable of making use of more than one weapon when engaging the foe at range. Though far from efficient, such an assault is capable of overwhelming the foe with sheer firepower.

A Model with the Firing Protocols (X) Special Rule may attack with more than one ranged Weapon.

A Model with the Firing Protocols (X) Special Rule that makes attacks as part of a Shooting Attack, may make attacks with a number of Weapons equal to the value of X attached to the specific variant of the Firing Protocols (X) Special Rule. The Model must have more than one Ranged Weapon to make use of this Special Rule and may not use the same Weapon more than once in the same Shooting Attack.
Support Unit (X)

Following behind frontline forces and providing fire support to overcome especially dug-in foes, some units are not equipped for holding positions or seizing ground, and instead focus their attention on aiding their allies.

A Unit that contains Models with this Special Rule scores fewer Victory Points for Controlling Objective Markers.

A Unit that includes any Models with the Support Unit (X) Special Rule may only ever score a maximum number of Victory Points equal to the value of X for Controlling an Objective, regardless of the Value of that Objective, or any other Special Rules Models in that Unit might have (such as the Line (X) Special Rule).

Combi-bolter

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Combi-bolter
Combi-bolter
24
4
4
5
1
-
Bolt
Combi

Some weapons feature multiple weapons systems linked to the same trigger. Often each weapon will have a specific role, but in extremis, both can be fired simultaneously, blasting the foe with a variety of deadly munitions.

A Weapon with this Special Rule can fire multiple profiles simultaneously.

Each time a Model makes a Shooting Attack with a Weapon Profile with this Special Rule, the Controlling Player can select another Profile from the same Weapon with this Special Rule and make attacks with it as part of the same Shooting Attack. Note that if that Profile also has the Limited (X) Special Rule, this does not allow it to be selected to make attacks more than the number of times equal to the value of X on that Special Rule.
Template

Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.

Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.

When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.

Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.

Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.

Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.

OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.

An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Panic (X)

Some weapons are so terrifyingly potent that their use instils abject fear in even the most strong-willed warriors. In the face of such wanton power the target can only flee or prepare for death, for few would live to tell of the true horrors of the Age of Darkness once they were unleashed on the battlefield.

Weapons and other attacks that have the Panic (X) Special Rule have a chance of inflicting the Routed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Leadership Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Routed Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Leadership Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule. If the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.
Limited (X)

Some weapons carry only a severely limited stock of munitions. Often intended as weapons of last resort, used at the correct point they can turn the tide of battle.

A Weapon with the Limited (X) Special Rule can only be used to attack a limited number of times per Battle.

A Weapon with the Limited (X) Special Rule may only be used to make attacks as part of a Shooting Attack or Combat a number of times equal to the value of X attached to the specific variant of the Special Rule. Each time it is used to make attacks, the Firepower Characteristic or Attacks Modifier Characteristic of the Weapon is not modified by this Special Rule, only the number of times it may be selected in a given Battle.
Melta (X)

The beams of energy generated by melta weaponry dissipate over long ranges. When used at close quarters, however, their effect on armoured vehicles is devastating.

This Special Rule increases the amount of Damage against Vehicles when Shooting Attacks are made within a specific range.

If at least one Model in a Unit with the Vehicle Type that is targeted by a Shooting Attack made by a Model using a Weapon with this Special Rule is within a range equal to or less than the value specified by X, that attack has the Armourbane Special Rule and the Damage of Penetrating Hits caused by that attack is doubled.
Deflagrate (X)

Exotic beam weapons of arcing energy or sequential explosions triggered by the death of the first victim, some weapons cause not a single casualty, but a slew of them. Such weapons are wielded with grim efficiency against close packed formations of troops on the battlefields of the Horus Heresy. The most well-known examples are the volkite weapons of Mars, but many others are known.

Unsaved Wounds inflicted by attacks with the Deflagrate (X) Special Rule can cause additional Hits.

At the end of Step 9 of the Shooting Attack process for any Fire Group or Strike Group that includes Weapons with the Deflagrate (X) Special Rule, create a new Fire Group or Strike Group that must then be selected in Step 10 and resolved. This new Fire Group or Strike Group includes a number of Hits equal to the number of Unsaved Wounds caused by the Fire Group or Strike Group that triggered its creation. These Hits all have a Strength equal to the value of X attached to the variant of the Deflagrate (X) Special Rule possessed by Weapons in the preceding Fire Group or Strike Group, an AP of a Damage of 1 and no Special Rules.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.

In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
  1. Select Target Unit.
  2. Check Target.
  3. Declare Weapons.
  4. Set Fire Groups.
  5. Select Fire Group To Resolve.
  6. Make Hit Tests.
  7. Make Wound Tests.
  8. Select Target Model.
  9. Make Saving Throws & Damage Mitigation Tests.
  10. Select Next Fire Group.
  11. Remove Casualties.
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)

Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.

Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.

When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.

Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.

If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.

Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.

If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Shock (X)

Blasts of exotic radiation, malignant scrap-code or other targeted attacks can render the systems of complex war engines vulnerable without penetrating their armour. While such weapons are less likely to leave their target as a broken ruin, the deleterious effects of their attacks can render even the most powerful war machines impotent.

Weapons with the Shock (X) Special Rule have a chance of inflicting Statuses on Vehicles even if it does not penetrate their armour.

When making a Hit Test for a Weapon with this Special Rule against a Target Unit that includes any Models with the Vehicle Type or Walker Type, the result of the Hit Test before any modifiers are applied must be checked. If any Hit Test for a Weapon with the Shock (X) Special Rule results in a ‘5’ or ‘6’ before any modifiers are applied, then all Models with the Vehicle Type or Walker Type in the Target Unit gain a Status at the end of Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process. The Status gained is indicated by the value of X attached to that variant of the Shock (X) Special Rule. If the Model already has the stated Status or the attack would apply the Status multiple times there is no additional effect and this Special Rule never causes a Model to lose Wounds or Hull Points. Hits inflicted by a Weapon with this Special Rule must still have Wound Tests or Armour Penetration Tests made for them, and are not discarded if they trigger this Special Rule.
Pinning (X)

The crack of the sniper’s rifle or the burst of heavy artillery, both signal a sudden and indiscriminate death and send infantry scurrying for cover. Such weapons are meant as much to pin the foe in place as to kill them, breaking up advancing ranks of troops and shattering defensive formations.

Weapons and other attacks that have the Pinning (X) Special Rule have a chance of inflicting the Pinned Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Pinned Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.
Combi-weapons

An Ancient Terran innovation, pairing a bolter with another secondary weapon to allow elite formations of warriors to project superior firepower at the climactic moment of battle. Most often used to break through enemy lines or to stymie the onslaught of enemy armour, these weapons are the mark of the elite of the Legiones Astartes, issued to the most skilled of warriors to maximise their worth.

Each Combi-weapon will have two components; a bolter Primary component and a Secondary component. Unless otherwise specified, each Combi-weapon has the following components:
  • Combi-flamer: Bolter (primary) and flamer (secondary)
  • Combi-melta: Bolter (primary) and melta gun (secondary)
  • Combi-plasma: Bolter (primary) and plasma gun (secondary)
  • Combi-volkite: Bolter (primary) and volkite charger (secondary)
  • Combi-grenade: Bolter (primary) and grenade launcher - Krak (secondary)
  • Combi-disintegrator: Bolter (primary) and disintegrator (secondary)
  • Combi-grav: Bolter (primary) and graviton gun (secondary)
Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Bolter (Primary)
Bolter (Primary)
24
2
4
5
1
Combi
Bolt
Flamer (Secondary)
Flamer (Secondary)
Template
1
4
5
1
Template, Panic (1), Limited (1), Combi
Flame
Meltagun (Secondary)
Meltagun (Secondary)
12
1
8
2
3
Melta (6), Limited (1), Combi
Melta
Plasma gun (Secondary)
Plasma gun (Secondary)
24
2
6
4
1
Breaching (6+), Limited (1), Combi
Plasma
Volkite charger (Secondary)
Volkite charger (Secondary)
15
2
5
5
1
Deflagrate (5), Combi
Volkite
Grenade launcher (Secondary) - Krak
Grenade launcher (Secondary) - Krak
24
1
6
4
2
Combi
-
Graviton gun (Secondary)
Graviton gun (Secondary)
18
1
6
4
1
Blast (3"), Breaching (6+), Shock (Pinned), Pinning (1), Limited (1), Combi
Graviton
Legion Combi-weapons
  • - Combi-bolter
    +5 points
  • - Combi-flamer
    +10 points
  • - Combi-melta
    +10 points
  • - Combi-plasma
    +10 points
  • - Combi-volkite
    +10 points
  • - Combi-grenade
    +10 points
  • - Combi-disintegrator
    +10 points
  • - Combi-grav
    +10 points
Rending (X)

Some weapons cleave flesh with ease, inflicting terrible wounds that no mortal toughness can resist. Though of less use against armour and steel, such munitions are capable of tearing bloody holes in the ranks of advancing infantry and stalling any attack in its tracks.

With a Weapon that has the Rending (X) Special Rule, there is a chance that a Hit Test may result in an automatic wound.

When any Hit Test is made for an attack with the Rending (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Rending (X) Special Rule, then if a Hit is inflicted by that Hit Test, that Hit becomes a ‘Rending Hit’.

When required to make a Wound Test for a Rending Hit, no Dice are rolled and the Wound Test succeeds automatically regardless of the Weapon’s Strength or the Target’s Toughness. The Wound Test is treated as if the result had been ‘6’ for the purposes of any Rules that would be triggered on certain results of a Wound Test. Wounds caused by a Rending Hit use the AP and Damage Characteristics of the Weapon used to make the attack and retain any Special Rules that Weapon had.

If the Target Unit for an attack made with a Weapon that has this Special Rule includes any Models with the Vehicle Type, then this Special Rule has no effect.
Critical Hit (X)

Whether by dint of superior skill or exemplary wargear, some warriors are better able to place strikes on enemy weak points. Such attacks can fell even the most powerful foes with a single well-placed shot.

Attacks made with the Critical Hit (X) Special Rule have a chance to automatically cause a wound and inflict 1 extra point of Damage.

When any Hit Test is made for an attack with the Critical Hit (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Critical Hit (X) Special Rule, then if a Hit is inflicted by that Hit Test, that Hit becomes a ‘Critical Hit’.

A Critical Hit automatically inflicts a wound without any Dice being rolled, counting as the roll of a ‘6’ for any variable Special Rules that might be triggered by a Wound Test, and increases the Damage Characteristic of the Hit by +1.
Ranged Hit Tests
Ranged Hit Tests include all Hit Tests made outside of Combat or at a distance further than Base-to-Base Contact. Ranged Hit Tests are normally part of a Shooting Attack which details how to select targets. The Rules in this section are focussed only on the process of rolling Hit Tests.

When making a Ranged Hit Test for any Model, roll a number of Dice equal to the Firepower Characteristic of any one Weapon that the Model has (or when instructed roll all of the Dice for attacks made using the same Ballistic Skill and for identical Weapons - a grouping known as a Fire Group - see the Rules for the Shooting Phase for more details). These Dice are rolled as a Test, using the Ranged Hit Test Table and the attacking Model’s Ballistic Skill to determine the Target number for the Test.

RANGED HIT TEST TABLE
The following table is used to determine the Target Number for Ranged Hit Tests:

BS10+987654321
Target NumberAC3+C4+C5+C6+2+3+4+5+6+
*Snap Shots2+3+3+4+4+5+5+6+6+F
BS10+9876
Target NumberAC3+C4+C5+C6+
*Snap Shots2+3+3+4+4+
BS54321
Target Number2+3+4+5+6+
*Snap Shots5+5+6+6+F
*Some Rules may require Ranged Hit: Tests to be made as Snap Shots, such Hit Tests use this row to determine their Target Number.

Where a number is shown, that is the Target Number of the Ranged Hit Test. For other entries, use the following Rules to resolve the Hit Test:

F (Fail) – If the table shows an ‘F’ then no Dice are rolled and the Test automatically fails to Hit, applying any effects a miss would normally apply to the attacking Model. For Weapons with the Rending (X) Special Rule, a result of F does not trigger the Rending (X) Special Rule.
A (Automatic) – if the table shows an ‘A’ then no Dice are rolled and the Test automatically succeeds as if the Dice’s natural result had been a ‘6’, applying all effects that such a result would normally apply. In addition, such an attack also applies all of the effects of a Critical Hit (see the Critical Hit (X) Special Rule).
CX+ (Critical Hit) – If the table shows a ‘CX+’, then the Target Number of the Ranged Hit Test is 2+, but if the roll results in a value equal to or greater than the value of ‘X’ then the Hit gains the effects of the Critical Hit (X) Special Rule.

As with other Tests, any Dice whose result equals or exceeds the Target Number has succeeded and inflicts a Hit on the Target Unit.
Cover Tests
Cover Saves are granted by Terrain and Special Rules and are not listed as a Characteristic on a Model’s Profile.

If a Model cannot have an Armour Save made for it, or the Controlling Player chooses not to make an Armour Test, but has access to a Cover Save then that Saving Throw may be made instead of an Armour Test or an Invulnerable Test. A Cover Test is resolved in exactly the same manner as an Armour Test. Cover Tests are normally provided by certain types of Battlefield Terrain, but may also be granted by certain Special Rules. Note that Cover Tests are not affected by the AP value of a wound, however a Model may not have a Cover Test made for it if:
  • A Special Rule or other effect attached to the wound specifies that it ignores Cover Saves or that no Cover Test may be made.
  • The attack is being made as part of a Combat during the Fight Sub-Phase, or a Challenge in the Challenge Sub-Phase.
  • A Cover Test may be taken to discard a Penetrating Hit, if one is available to the Model.

Omni-scope

A sophisticated cogitator-slaved optical scanner integrated into the modified Terminator armour of the squad’s Siege Master, the omni-scope allows for precise targeting solutions to be formulated in the blink of an eye. With weapons slaved to this device, the Tyrants of the Iron Warriors are deadly combatants on any battlefield.

When a Shooting Attack made by a Unit that includes any Models with an omni-scope inflicts any Hits (excluding Hits from attacks made as Snap Shots), Cover Saving Throws cannot be made against those Hits.
Army List
Datasheets collated
Transport
• Drop Pod
• Rhino
• Termite
Faction Rules
• The Legiones Astartes Army List
• The Legiones Astartes at War: Building a Space Marine Army
• Additional Prime Advantage
• Legiones Decurion
• Wargear Lists
• The Loyalist Legions
• Special Rules
• Psychic Disciplines
• Wargear
• Advanced Reactions
• Armoury of the Legiones Astartes
• Dark Angels
• White Scars
• Space Wolves
• Imperial Fists
• Blood Angels
• Iron Hands
• Ultramarines
• Salamanders
• Raven Guard
• Emperor’s Children
• Iron Warriors

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
© Vyacheslav Maltsev 2013-2026