Datasheets
Army List
Datasheets collated
Transport
• Drop Pod
• Rhino
• Termite
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Legiones Astartes – Rogal Dorn
[  ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
  • Rogal Dorn 435 Points
Primarch of the Imperial Fists, the Vigilant, the Blade of the Emperor, Praetorian of Terra, the Unyielding One
UNIT COMPOSITION: 1 ROGAL DORN

A being of thunderous zeal and stone made manifest is how many described the Primarch of the VIIth Legion. The zeal was the fire of a son who believed in his father’s dream for the Imperium without reservation and without question. To Rogal Dorn, there was no higher purpose to the existence of the Legiones Astartes than the unification of Mankind, and the illumination of the Imperium’s ideals. This idealism drove Dorn and his Legion ever onwards, never compromising, never stinting in any aspect of duty. The stone in his soul was his ability to bear whatever his father needed of him, an unyielding nature, which made him both a master of defence in war, and an indomitable fighter on the attack.

If the Primarchs were the Emperor’s nature split like white light through a prism, as many scholars of the Imperial Court suggested, then, from such a point of view, Rogal Dorn was the Emperor’s implacable disciple in the pursuit of the cause given flesh; a being without compromise and in who loyalty and duty were as integral as blood and breath.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Rogal Dorn (⌀40mm) 12 10 10 10
Rogal Dorn (⌀40mm) 8 7 6 6 6 6 6 6 12 10 10 10 2+ 4+
WARGEAR
  • Storm’s Teeth
  • The Voice of Terra
  • Frag grenades
  • Krak grenades
TRAITS
  • Loyalist
  • Imperial Fists
  • Master of the Legion
SPECIAL RULES
  • Sire of the Imperial Fists
  • Bulky (4)
  • Bulwark of the Imperium
  • Eternal Warrior (2)
TYPE
  • Paragon (Unique)
WARGEAR

Storm’s Teeth

This colossal chainblade, too weight)’ for any but a Primarch to wield, is said to have been crafted by the weaponsmiths of Inwit before the coming of the Emperor. Its razored teeth can shred metal, stone and flesh with ease and, while the Primarch of the Imperial Fists Legion has many arms at his disposal, some relics of far greater power, it is this blade which has served him faithfully for so long he favours most.

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Storm’s Teeth
Storm’s Teeth
1
A
S
2
2
Shred (4+) Reaping Blow (2)
Chain

The Voice of Terra

Presented to Rogal Dorn by the Custodian Guard to honour the Primarch’s appointment as Praetorian of Terra, this tactical bolter follows the pattern of the Legio Custodes’ own weaponry, albeit redesigned for the hand and might of a Primarch to wield.

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
The Voice of Terra
The Voice of Terra
24
3
5
3
1
Breaching (5+)
Bolt, Assault

SPECIAL RULES

Sire of the Imperial Fists

Ever the pragmatist, Dorn insisted his sons fight from a position of strength. Once a location was secured, makeshift fortifications could be erected to provide a solid beachhead from which to launch further assaults. For the Imperial Fists, these provided a level of protection as well as a prepared fallback position should their assault falter.

If a Model with this Special Rule is part of an Army, then the Controlling Player may apply the following additional Special Rules to all Auxiliary, Apex and Primary Detachments that have the same Faction Trait as the Model with this Special Rule:

Furthermore, if a Model with this Special Rule is part of an Army, then all Models with the Imperial Fists Trait and the Infantry Type gain the Prepared Defenses Special Rule:

Prepared Defenses: Until the end of the first Battle Turn of the Battle, all Models in this Army with the Infantry Type and the Imperial Fists Trait have a 5+ Cover Save while they are within their Controlling Player’s Deployment Zone.

Bulwark of the Imperium

Like the mountains upon which the Imperial Palace was built, Dorn was resolute and unyielding. Amongst his brothers, none could claim to have held where Dorn held. None could claim to have stood where he stood. None endured what he endured.

This Gambit allows Rogal Dorn to fight defensively.

While a Model with this Special Rule is engaged in a Challenge, its Controlling Player can select the following Gambit:

Bulwark of the Imperium: While this Gambit is selected, Wound Tests made against the Model that this Gambit was selected for that have an unmodified result of a 1, 2, 3 and 4 are never successful regardless of the Strength Characteristic of a Hit or any Special Rules that set the Target Number for Wound Tests.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.

In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
  1. Select Target Unit.
  2. Check Target.
  3. Declare Weapons.
  4. Set Fire Groups.
  5. Select Fire Group To Resolve.
  6. Make Hit Tests.
  7. Make Wound Tests.
  8. Select Target Model.
  9. Make Saving Throws & Damage Mitigation Tests.
  10. Select Next Fire Group.
  11. Remove Casualties.
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)

Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.

Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.

When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.

Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.

If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.

Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.

If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
Detonation

Designed to be carefully attached to a target and blast precise holes in the thickest armour, these cumbersome devices are ill-suited to open war. However, when a vulnerable target can be isolated in battle, there are no better tools for piercing its protection.

Weapons with this Special Rule can only attack Vehicles and immobile Models.

A Weapon or attack with this Special Rule may only be selected during Step 2 of any Combat in the Fight Sub-Phase if the Unit making attacks is only Locked in Combat with enemy Units composed of Models with the Vehicle Type and Models with a Movement Characteristic of ‘0’ or ‘-’. If a Unit is Locked in Combat with any enemy Units that include any Models that do not have the Vehicle Type or a Movement Characteristic of ‘0’ or ‘-’ then no Model may use a Weapon or other attack that has this Special Rule.

A Weapon or other attack with this Special Rule may also be used to make attacks targeting a Model with the Building Type or a Terrain Piece that has a Toughness or Armour Characteristic.

Krak grenades

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Krak grenades
Krak grenades
-3
1
6
4
2
Detonation
-
Infantry

Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.

Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.
Shred (X)

Designed to rip and tear flesh, some weapons are fearsome and intimidating tools of warfare. Whether by the gnashing teeth of a chainblade or the jagged edges of flechette ammunition, these weapons scythe great holes in the lines of even the toughest of infantry and the largest of warriors.

Attacks made with the Shred (X) Special Rule can sometimes inflict an extra point of Damage.

When any Wound Test is made for an attack with the Shred (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Shred (X) Special Rule, then if a wound is inflicted by that Wound Test, the Damage Characteristic of that wound is increased by 1. Note that the Shred (X) Special Rule may only be triggered by a Wound Test and has no effect when making an Armour Penetration Test.
Breaching (X)

Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.

With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.

When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.

A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
ENGAGED
A Model is Engaged if either:
  • That Model is in Base Contact with an enemy Model in the same Combat.
  • That Model is no more than 2" from another Model in the same Unit which is in Base Contact with an enemy Model.
Reaping Blow (X)

Whether by skill or the merits of a weapon’s design, some warriors are capable of sweeping strikes that scythe through the ranks of the foe.

If a Model with this Special Rule is outnumbered, it gains extra attacks.

If a Model is outnumbered in Combat and either has this Special Rule or is made to attack with a Weapon that has this Special Rule, then that Model gains a bonus to its Attacks Characteristic equal to the value of X attached to the variant of this Special Rule it has access to. To be considered outnumbered, the total number of Friendly Models Locked in the same Combat must be less than the total number of Enemy Models Locked in the same Combat - Models with the Bulky (X) Special Rule count as a number of Models equal to the value of X in the variant of the Bulky (X) Special Rule that Model has. This Special Rule has no effect during the Challenge Sub-Phase, and no Model that is Engaged in a Challenge may gain additional Attacks due to this Special Rule.
Army List
Datasheets collated
Transport
• Drop Pod
• Rhino
• Termite
Faction Rules
• The Legiones Astartes Army List
• The Legiones Astartes at War: Building a Space Marine Army
• Additional Prime Advantage
• Legiones Decurion
• Wargear Lists
• The Loyalist Legions
• Special Rules
• Psychic Disciplines
• Wargear
• Advanced Reactions
• Armoury of the Legiones Astartes
• Dark Angels
• White Scars
• Space Wolves
• Imperial Fists
• Blood Angels
• Iron Hands
• Ultramarines
• Salamanders
• Raven Guard

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!

This datasheet has Warlord Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:

Frag Grenades

This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.

Frag grenades can be used to make attacks during the Volley Step.

When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Frag Grenades
Frag Grenades
6
1
3
6
1
Blast (3")
Assault

The Loyalist Trait is used in the following Legiones Astartes datasheets:

The Master of the Legion Trait is used in the following Legiones Astartes datasheets:

Command
• Camba Diaz
Paragon

Mightiest of all the Emperor’s creations and the greatest warriors and generals of their age, the Primarchs of the Space Marine Legions epitomise the dark ages of the Horus Heresy. These colossi of war were powerful beyond the capabilities of any mortal warrior or steel-forged automata - for their only equal was another of their own kind.

The following Rules apply to all Models with the Paragon Type:
  • Any Hits inflicted by a Model with the Paragon Type, as part of either Shooting Attacks or in close combat, are allocated by the attacking Model’s Controlling Player and not the Controlling Player of the Target Unit.
  • Models with the Paragon Type may join and leave a Unit that includes Models with the Infantry Type, and Models with the Infantry Type may join and leave a Unit that includes one or more Models with the Paragon Type.
  • Models with the Paragon Type may Embark and Disembark upon Models with the Transport Sub-Type.
  • A Model with the Paragon Type may Issue and Accept Challenges.
  • The Controlling Player of a Unit that includes one or more Models with the Paragon Type may use the Characteristics of one of those Models to resolve any Characteristic Checks made for that Unit.
  • In Step 1 of the Resolution Sub-Phase, when deciding how many Models a Player controls in a Combat, a Model with the Paragon Type counts as a number of Models equal to that Model’s Base Wounds Value.
Unique

Among the warriors and war machines of the Horus Heresy there are many whose names are known throughout the galaxy. Such heroes, prototypes and icons are rare, and though their power can tip any battle in their favour, they can only be in one place at a time.

The following Rules apply to all Models with the Unique Sub-Type:
  • An Army may not include more than a single instance of a given Model with this Sub-Type. For example, if Model A and Model B both have the Unique Sub-Type then a single Army could include one of Model A and one of Model B, but no more than one of either Model.
  • A Model with the Unique Sub-Type or a Unit composed entirely of Models with the Unique Sub-Type may not have any options other than those included on its Army List Profile selected for them.
TROOPS – The line troops that hold ground and allow generals to claim victory.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Eternal Warrior (X)

Some warriors are either so preternaturally tough, so bitterly intransigent or so favoured by fortune that they can survive almost any attack. Devastating close combat strikes and huge explosions all fail to bring down this warrior in a single hit and only repeated attacks can end their rampage.

A Model with this Special Rule takes less Damage from attacks.

When a Model with the Eternal Warrior (X) Special Rule is allocated an Unsaved Wound, the Damage of the Unsaved Wound is reduced by the value of X attached to the specific variant of the Eternal Warrior (X) Special Rule. The effects of this Special Rule cannot reduce the Damage of an Unsaved Wound to less than 1, regardless of the value of X.
Player
A Player is the actual person moving Models and making rolls, the Player of the game. Battles will include more than one Player, and the Rules will often refer to the Active Player (the Player currently taking their Player Turn) and the Reactive Player (the Player not currently taking their Player Turn, and thus only allowed to interact with the game through Reactions) in order to differentiate between them. Sometimes the Rules will also refer to the Controlling Player, that is the Player that Controls the Unit, Model or other game element the Rule is referring to.
HIGH COMMAND – The highest ranked officers of an Army.
Auxiliary Detachments
An Army can include any number of Auxiliary Detachments, depending on the number and type of Command Choices selected.

An Army may include any number of Auxiliary Detachments. The number available in any Army is determined by the number of Command Force Organisation Slots that have been filled, with each such Slot filled allowing a single Auxiliary Detachment to be taken. A Player may also choose to include an Auxiliary Detachment for one or more of the High Command Force Organisation Slots available to them, gaining one Auxiliary Detachment for each High Command Slot selected, but any High Command Slots selected in this manner no longer grant the Player an Apex Detachment. All Auxiliary Detachments are linked to other Detachments, usually either Primary or Allied Detachments, which determines which Army List and Faction must be used by the Auxiliary Detachment.
COMMAND – The line officers of an Army.
Apex Detachments
An Army can include any number of Apex Detachments, depending on the number and type of High Command Choices selected.

An Army may include any number of Apex Detachments. The number available in any Army is determined by the number of High Command Force Organisation Slots that have been filled, with each such Slot filled allowing a single Apex Detachment to be taken. Any High Command Force Organisation Slots that were optionally used to include an additional Auxiliary Detachment in the Army do not also allow an Apex Detachment to be included - for each High Command Slot the Controlling Player may include one Apex Detachment or one Auxiliary Detachment, not both. All Apex Detachments are linked to other Detachments, usually Primary Detachments, which determines which Army List and Faction must be used by the Apex Detachment. Each High Command Force Organisation Slot filled in an Apex Detachment allows the Controlling Player to select an additional Apex Detachment or Auxiliary Detachment to be linked to the Primary Detachment. Furthermore, each Command Force Organisation Slot filled in an Apex Detachment allows the Controlling Player to select an additional Auxiliary Detachment to be linked to the Primary Detachment.
Primary Detachments
All Armies must include one, and no more than one, Primary Detachment.

Every Army must include a single Primary Detachment - and may never include more than one. Each High Command Force Organisation Slot filled in the Primary Detachment allows the Controlling Player to select one Apex or Auxiliary Detachment to be added to the Army. Likewise, each Command Force Organisation Slot filled in the Primary Detachment allows the Controlling Player to select one Auxiliary Detachment to be added to the Army. If multiple Command Force Organisation Slots are filled, then multiple Auxiliary Detachments may be added to the Army - these may be multiple instances of the same Auxiliary Detachment or different Auxiliary Detachments as the Player desires. Apex and Auxiliary Detachments added to the Army in this manner are linked to the Primary Detachment and must use the same Army List to select any Units that are selected to fill Force Organisation Slots in those Detachments. Players may choose not to add additional Detachments when eligible to do so.
Faction
Faction is a type of Trait that refers to the various forces that fought during the Horus Heresy. Each Model in an Army must belong to one of these Factions. Examples of Factions include: each of the Space Marine Legions (Ultramarines, Sons of Horus, etc.), the Legio Custodes, the Sisters of Silence and the Mechanicum. A given Detachment will usually only include Models from one Faction (though an Army may include Models from more than one Faction) and certain Special Rules only affect Models with a certain Faction.
Wound Tests
Once a Unit has one or more Hits inflicted on it, whether a Rule has dictated their application or they have been inflicted as part of a Shooting Attack or Combat, a Wound Test must be made to resolve those Hits. The Rules presented here cover only the process of making Wound Tests and resolving their effects; See rules regarding inflicting Hits as part of a Shooting Attack or Combat.

A Wound Test must be made for each Hit inflicted on a Unit, but Wound Tests for Hits with different Strengths, AP values or Special Rules must be rolled separately so that all Players know which Hit is being resolved by a given Wound Test. The order in which differing Wound Tests are made is decided by the Player making the attacks (see the Rules for Shooting Attacks and the Fight Sub-Phase).

To make a Wound Test, roll a number of Dice equal to the number of Hits with the same Strength, AP, Damage and Special Rules that have been inflicted on the Model being rolled for. These Dice are rolled as a Test, using the Wound Table shown here to compare the Hit’s Strength and the Model’s Toughness to determine a Target Number for the Test.


As with other Tests, any Dice whose result equals or exceeds the Target Number has succeeded and inflicts a wound on the Target Unit. Wounds with different Strength, AP or Damage values should be resolved separately in order to streamline the Wound Test process.
Battle Turn
A Battle Turn is defined as all Players having resolved a single Player Turn as the Active Player (thus there are usually two Player Turns in each Battle Turn). In general a Battle is measured in Battle Turns to allow all Players to have the same number of Player Turns as the Active Player and so an equal chance to interact with the Mission, accumulate Victory Points and win. In general, Player Turns within a Battle Turn will always follow the same order - in that one Player will always take the role of the Active Player first in each Battle Turn.
Cover Save (COV) – A Cover Save is used to negate wounds that would normally ignore or bypass an Armour Test. Few Models will have a Cover Save Characteristic, but other Rules may grant them one temporarily - such as Area Terrain. When a Model’s Cover Save is at its minimum value of ‘-’, that Model may not make Cover Tests.

Storm’s Teeth

This colossal chainblade, too weight)’ for any but a Primarch to wield, is said to have been crafted by the weaponsmiths of Inwit before the coming of the Emperor. Its razored teeth can shred metal, stone and flesh with ease and, while the Primarch of the Imperial Fists Legion has many arms at his disposal, some relics of far greater power, it is this blade which has served him faithfully for so long he favours most.

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Storm’s Teeth
Storm’s Teeth
1
A
S
2
2
Shred (4+) Reaping Blow (2)
Chain

The Voice of Terra

Presented to Rogal Dorn by the Custodian Guard to honour the Primarch’s appointment as Praetorian of Terra, this tactical bolter follows the pattern of the Legio Custodes’ own weaponry, albeit redesigned for the hand and might of a Primarch to wield.

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
The Voice of Terra
The Voice of Terra
24
3
5
3
1
Breaching (5+)
Bolt, Assault

The Imperial Fists Trait is used in the following Legiones Astartes datasheets:

Warlord
• Rogal Dorn
Transport
• Rhino
• Termite
Sire of the Imperial Fists

Ever the pragmatist, Dorn insisted his sons fight from a position of strength. Once a location was secured, makeshift fortifications could be erected to provide a solid beachhead from which to launch further assaults. For the Imperial Fists, these provided a level of protection as well as a prepared fallback position should their assault falter.

If a Model with this Special Rule is part of an Army, then the Controlling Player may apply the following additional Special Rules to all Auxiliary, Apex and Primary Detachments that have the same Faction Trait as the Model with this Special Rule:

Furthermore, if a Model with this Special Rule is part of an Army, then all Models with the Imperial Fists Trait and the Infantry Type gain the Prepared Defenses Special Rule:

Prepared Defenses: Until the end of the first Battle Turn of the Battle, all Models in this Army with the Infantry Type and the Imperial Fists Trait have a 5+ Cover Save while they are within their Controlling Player’s Deployment Zone.
Bulwark of the Imperium

Like the mountains upon which the Imperial Palace was built, Dorn was resolute and unyielding. Amongst his brothers, none could claim to have held where Dorn held. None could claim to have stood where he stood. None endured what he endured.

This Gambit allows Rogal Dorn to fight defensively.

While a Model with this Special Rule is engaged in a Challenge, its Controlling Player can select the following Gambit:

Bulwark of the Imperium: While this Gambit is selected, Wound Tests made against the Model that this Gambit was selected for that have an unmodified result of a 1, 2, 3 and 4 are never successful regardless of the Strength Characteristic of a Hit or any Special Rules that set the Target Number for Wound Tests.
© Vyacheslav Maltsev 2013-2026