Legiones Astartes – Moritat
- Moritat 95 Points
UNIT COMPOSITION: 1 MORITAT
Said by some to be no less than death incarnate, and by others to be dishonourable murderers with no place in the Imperium’s order of battle, moritats are lone killers operating outside the Legion’s usual command structures at the behest, or at least sufferance, of its high commanders. Regarded usually as dangerously unstable outcasts - perhaps created by some seldom- exposed flaw of gene-seed or indoctrination - they operate alongside the Destroyer cadres, honing their superhuman reflexes to gun down the foe at close-quarters.
| LD | CL | WP | IN | |||||||||||
| M | WS | BS | S | T | W | I | A | LD | CL | WP | IN | SAV | INV | |
| Moritat (⌀32mm) | 8 | 9 | 8 | 8 | ||||||||||
| Moritat (⌀32mm) | 12 | 4 | 6 | 4 | 4 | 3 | 5 | 3 | 8 | 9 | 8 | 8 | 2+ | 5+ |
WARGEAR
- Two overcharged volkite serpentas
- Frag grenades
- Krak grenades
- Rad grenades
TRAITS
- [Allegiance]
- [Legiones Astartes]
SPECIAL RULES
- Bitter Duty
- Bulky (2)
- Deep Strike
- Firestorm
TYPE
- Infantry (Specialist, Antigrav)
OPTIONS
- This Model may have both its overcharged volkite serpentas exchanged for two overcharged plasma pistols for +10 Points.
- This Model may have melta bombs selected for it for +5 Points.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.
In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.
While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Pistol
Compact and deadly, pistols are ideal weapons in close quarters. They lack the sheer range of larger weapons, but can be brought to bear with impressive speed and are no less deadly than their larger counterparts.
A Model may attack with two Weapons that have the Pistol Special Rule.During Step 3 of any Shooting Attack, a Player may choose to have a Model under their control make attacks with two Weapons rather than one if both Weapons have the Pistol Special Rule.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)
Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.
Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.
Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.
Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.
If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
The [Allegiance] Trait is used in the following Legiones Astartes datasheets:
The [Legiones Astartes] Trait is used in the following Legiones Astartes datasheets:
Infantry
Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.
Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.Breaching (X)
Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.
With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.
A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Overload (X)
Some weapons are almost as dangerous to the wielder as to the foe. Supercharged powerpacks can explode in combat or volatile munitions can jam or even detonate, all of which can prove deadly to those charged with deploying such weapons.
Weapons with this Special Rule may inflict Hits on the Models making Shooting Attacks with them.When the Controlling Player declares that attacks will be made for a Model using a Weapon or profile that has the Overload (X) Special Rule, any Hit Tests made for those attacks that result in a number that is equal to or less than the value of X attached to the variant of the Overload Special Rule that the Weapon had, before any modifiers are applied to the roll, are Misfires.
For Weapons that do not make Hit Tests, such as Weapons with the Template Special Rule, instead roll a number of dice equal to the Firepower Characteristic of the Weapon used to make the attack after the attack has been declared and the number of Models hit is determined. Each Dice that results in a number equal to or less than the value of X attached to the variant of the Overload Special Rule that the Weapon had creates a Misfire. This does not affect the number of Hits on the Target Unit created by this attack.
For each Misfire, the Unit for which the Hit Tests were made suffer a Hit - these Hits must form a new Fire Group or Strike Group, referred to as the ‘Misfire Group’.
Once the current Shooting Attack and any Reactions triggered by it have been fully resolved, the Misfire Group must be resolved. A Misfire Group is resolved in the same way as any other Fire Group or Strike Group, using the Profile of the Weapon used for the Fire Group or Strike Group it was created from. Wounds, Glancing Hits or Penetrating Hits from this Misfire Group are allocated by the Controlling Player, and must be allocated to a Model that made attacks as part of the Fire Group or Strike Group that generated the Misfire Group. If a Hit from a Misfire Group is generated by an attack made by a Model with the Vehicle Type, then it is resolved against the lowest Armour Value from all of the Model’s facings.
Hits, wounds or Casualties inflicted upon a Unit as a result of this Special Rule do not cause Leadership or Cool Checks, and Hits inflicted as part of a Misfire Group do not trigger any Special Rules that take effect as a result of a certain value on a Hit Test.
Deflagrate (X)
Exotic beam weapons of arcing energy or sequential explosions triggered by the death of the first victim, some weapons cause not a single casualty, but a slew of them. Such weapons are wielded with grim efficiency against close packed formations of troops on the battlefields of the Horus Heresy. The most well-known examples are the volkite weapons of Mars, but many others are known.
Unsaved Wounds inflicted by attacks with the Deflagrate (X) Special Rule can cause additional Hits.At the end of Step 9 of the Shooting Attack process for any Fire Group or Strike Group that includes Weapons with the Deflagrate (X) Special Rule, create a new Fire Group or Strike Group that must then be selected in Step 10 and resolved. This new Fire Group or Strike Group includes a number of Hits equal to the number of Unsaved Wounds caused by the Fire Group or Strike Group that triggered its creation. These Hits all have a Strength equal to the value of X attached to the variant of the Deflagrate (X) Special Rule possessed by Weapons in the preceding Fire Group or Strike Group, an AP of a Damage of 1 and no Special Rules.
Army List
Datasheets collatedFaction Rules
• Wargear
Frag Grenades
This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.
Frag grenades can be used to make attacks during the Volley Step.When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Frag Grenades | |||||||
| Frag Grenades | 6 | 1 | 3 | 6 | 1 | Blast (3") | Assault |
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)
Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.
Models with the Bulky (X) Special Rule take up more space on Transport Models.A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Poisoned (X)
Poison is a subtle weapon, relying not on brute strength to bring harm to the foe, hut on its own insidious bite. Though some consider it a dishonourable tool, there are many that are willing to make use of it in the name of victory.
A Weapon with the Poisoned (X) Special Rule has a chance to cause a wound regardless of the target’s Toughness.When making Wound Tests for Hits that have the Poisoned (X) Special Rule, if the result of any Dice rolled is equal to or greater than the value of X attached to the specific variant of this Special Rule then a wound is caused automatically, regardless of the Toughness Characteristic used to determine the Target Number. A Hit that has this Special Rule may still inflict a wound by passing a Wound Test as normal, instead of using this Special Rule, but never inflicts more than 1 wound if it would both pass the Wound Test and trigger the Poisoned (X) Special Rule. Wounds caused using the Poison (X) Special Rule retain the AP and Damage of the Weapon and Saving Throws and Damage Mitigation Tests may be made to discard them as normal. The Poisoned (X) Special Rule has no effect on Models that have the Vehicle Type, and limited effect on Models with the Automata or Walker Types.
Antigrav
Whether equipped with antigrav repulsors or empowered by some esoteric, psychic art, this unit is able to skim above the ground. While incapable of true flight, this does allow it to avoid any of the hampering effects of the prevailing terrain, gliding over obstacles that would ensnare or entangle more conventional troops.
The following Rules apply to all Models with the Antigrav Sub-Type:- A Unit that includes only Models with the Antigrav Sub-Type may ignore the effects of any and all Terrain it passes over during movement, including passing over Impassable Terrain without penalty or restriction. However, such Units may not begin or end their movement in Impassable Terrain, and if beginning or ending their movement in Dangerous Terrain must take Dangerous Terrain Tests as normal.
- A Unit that includes only Models with the Antigrav Sub-Type may ignore both friendly and enemy Models and Units when moving. However, when moving over a friendly Unit all Models with the Antigrav Sub-Type must end their move at least 1" away from all Models that are not part of the same Unit, or if moving over an enemy Unit, must end their move at least 1" away from any enemy Model.
Deep Strike
Deep strike deployments are usually conducted en-masse and at a distance from the enemy, lest the attacking force be destroyed in detail as it lands.
The Deep Strike Special Rule allows a Unit to enter play anywhere on the Battlefield.A Unit that includes only Models with the Deep Strike Special Rule that enters play from Reserves may make a Deep Strike instead of deploying as described in the Reserves Rules. No more than one Unit may attempt a Deep Strike in a given Player Turn. The Unit attempting a Deep Strike may have another Unit without the Deep Strike Special Rule Embarked upon it if the Deep Striking Unit includes Models with the Transport Sub-Type (note that some Missions may allow more Units to attempt a Deep Strike in the same Player Turn. This will be specifically noted in the Mission Special Rules section of that Mission). Note that in Missions where the Reserves Mission Special Rule is not in use, the Deep Strike Special Rule has no effect. Furthermore, Units may not make use of the Deep Strike Special Rule during the first Battle Turn, even if they enter play from Reserves.
To perform a Deep Strike, the Active Player must declare an Eligible Unit that has entered play from Reserves in the Reserves Sub-Phase as the Deep Striking Unit. The Active Player must then select one Model from that Unit and place it anywhere on the Battlefield. This Model must be placed at least 1" away from any enemy Model, Battlefield Edge or piece of Impassable Terrain. Once this first Model has been placed, the remaining Models in the Unit must be placed within Unit Coherency with at least one other Model in the same Unit and within 6" of the first Model placed. No Models may be placed within 1" of an enemy Model, any Battlefield Edge or a piece of Impassable Terrain. Any Models that cannot be placed using these Rules must be Removed as a Casualty immediately. This deployment must take place during the Reserves Sub-Phase, and a Unit that deploys as a Deep Strike may not move in the Move Sub-Phase of the same Player Turn or have a Charge declared for it in the Charge Sub-Phase of the same Player Turn, but may make Shooting Attacks as normal. A Unit that is Embarked on a Model that is deployed as part of a Deep Strike may Disembark during the Move Sub-Phase of the same Player Turn, but may not make any move other than the move made to Disembark and may not have a Charge declared for it in the Charge Sub-Phase of the same Player Turn.
Enemy Units may declare Intercept Reactions against a Unit deployed as part of a Deep Strike, but not Reposition Reactions.
This datasheet has Command Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:
Bitter Duty
Some warriors are marked by the dire weaponry they bear or the grim tactics in which they are trained. These dour cohorts are shunned by their brethren, whether out of respect for their burden or from fear of their rage.
Models with this Special Rule may not join Units that do not also have this Special Rule.A Unit that includes any Models with this Special Rule can only join Units or be joined by other Models with this Special Rule.
Phage (X)
Vile toxins, exotic radiation and all-consuming chemical agents all sap the abilities of warriors in the field even as they kill them. Most terrible are the effects of phosphex, choking the life and strength from those it touches, or the fleshcorroding properties of the dreaded life-eater virus.
Unsaved Wounds with the Phage (X) Special Rule reduce a Characteristic by 1.If an attack made for a Weapon or Model with this Special Rule inflicts one or more Unsaved Wounds on a Target Unit, then once the Shooting Attack or Initiative Step in which the Unsaved Wound was inflicted has been completely resolved, all remaining Models in the Unit that was the target of the attack must reduce the Characteristic that is the value of X for that variant of the Phage (X) Special Rule by 1 for the remainder of the Battle. Models in a Unit may have any number of different Characteristics reduced by 1 by the Phage (X) Special Rule, but no individual Characteristic may be reduced by more than 1 by the Phage (X) Special Rule no matter how many Unsaved Wounds with any variant of that Special Rule are allocated to Models in that Unit.
Rad grenades
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Rad grenades | |||||||
| Rad grenades | 8 | 1 | 4 | 3 | 1 | Poisoned (2+), Phage (T) | Rad |
Firestorm
Many units within the Legion conduct warfare at pointblank distances, blasting their foes with a deluge of short ranged firepower.
A Model with this Special Rule does not have to make Volley Attacks as Snap Shots.When a Model with this Special Rule makes Volley Attacks, it is not required to fire Snap Shots. In addition, after making Volley Attacks in Step 4 of the Charge Procedure, a Unit containing any Models with this Special Rule is not required to make a Charge Roll in Step 5. If the Controlling Player chooses not to make a Charge Roll in Step 5 of the Charge Procedure then the Charge Procedure ends immediately.
Overcharged volkite serpenta
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Overcharged volkite serpenta | |||||||
| Overcharged volkite serpenta | 10 | 4 | 6 | 5 | 1 | Pistol, Deflagrate (5), Overload (1) | Assault, Volkite |
Specialist
Some warriors are renowned not purely for their skill at arms, but for the specific skills they bring to the aid of their fellows. Such warriors move among the ranks as they are needed, taking up position to use their abilities to the greatest advantage amid the shifting tide of battle.
The following Rules apply to all Models with the Specialist Sub-Type:- A Model with the Specialist Sub-Type may join and leave Units.
Overcharged plasma pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Overcharged plasma pistol | |||||||
| Overcharged plasma pistol | 12 | 3 | 8 | 4 | 1 | Pistol, Breaching (4+), Overload (1) | Assault, Plasma |