Legiones Astartes – Centurion in Saturnine Terminator Armour
UNIT COMPOSITION: 1 SATURNINE CENTURION
150 PointsPts
Unlike most terminator formations, those Legion line officers assigned to divisions equipped with Saturnine plate tended to be drawn from support companies or the ranks of the armistos consularis, their marksmanship capabilities and aptitude with advanced weapon systems deemed preferable when equipping and commanding the highly sophisticated – if ponderous – Saturnine armour. Such centurions were highly skilled at directing the dread firepower of their subordinates, forging legends for themselves among the dark years of the Horus Heresy through the trail of ruined and blasted battlefields left in their wake.
USING THIS UNIT: This Core Unit can be included in Detachments from the Legiones Astartes Army List.
| LD | CL | WP | IN | |||||||||||
| M | WS | BS | S | T | W | I | A | LD | CL | WP | IN | SAV | INV | |
| Saturnine Centurion (⌀40mm) | 9 | 8 | 8 | 8 | ||||||||||
| Saturnine Centurion (⌀40mm) | 5 | 5 | 5 | 4 | 6 | 5 | 4 | 3 | 9 | 8 | 8 | 8 | 2+ | 4+ |
WARGEAR
- Plasma bombard
- Saturnine disruption fist
- Occulix Targeting Auspex
- Thermal diffraction field
- Saturnine Teleport Synchroniser
TRAITS
- [Allegiance]
- [Legiones Astartes]
SPECIAL RULES
- Officer of the Line (2)
- Bulky (4)
- Explodes (6+)
- Implacable Advance
- Slow and Purposeful
TYPE
- Infantry (Command, Heavy)
OPTIONS
- This Model may have its Saturnine disruption fist exchanged for one of the following:
- Plasma bombardFree
- Twin heavy disintegrator+10 Points
- This Model may have its plasma bombard exchanged for one twin heavy disintegrator for +10 Points.
- If this Model has a Saturnine disruption fist, it may have one of the following selected for it:
- Particle shredder+5 Points
- Plasma blaster+10 Points
WARGEAR
Saturnine Teleport Synchroniser
Set into the immense pauldrons which characterise Saturnine terminator armour, teleport synchronisers link to the teleportation transponders of senior officers, permitting mass teleport assaults by Saturnine-equipped warriors.
A Model with a Saturnine teleport synchroniser that is in Reserves gains the Deep Strike Special Rule if its Unit has been joined by a Model with a Saturnine teleportation transponder.Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.
In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.
While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)
Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.
Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.
Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.
Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.
If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
The [Allegiance] Trait is used in the following Legiones Astartes datasheets:
Warlord
High Command
• Praetor
The [Legiones Astartes] Trait is used in the following Legiones Astartes datasheets:
Infantry
Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.
Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.Breaching (X)
Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.
With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.
A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Overload (X)
Some weapons are almost as dangerous to the wielder as to the foe. Supercharged powerpacks can explode in combat or volatile munitions can jam or even detonate, all of which can prove deadly to those charged with deploying such weapons.
Weapons with this Special Rule may inflict Hits on the Models making Shooting Attacks with them.When the Controlling Player declares that attacks will be made for a Model using a Weapon or profile that has the Overload (X) Special Rule, any Hit Tests made for those attacks that result in a number that is equal to or less than the value of X attached to the variant of the Overload Special Rule that the Weapon had, before any modifiers are applied to the roll, are Misfires.
For Weapons that do not make Hit Tests, such as Weapons with the Template Special Rule, instead roll a number of dice equal to the Firepower Characteristic of the Weapon used to make the attack after the attack has been declared and the number of Models hit is determined. Each Dice that results in a number equal to or less than the value of X attached to the variant of the Overload Special Rule that the Weapon had creates a Misfire. This does not affect the number of Hits on the Target Unit created by this attack.
For each Misfire, the Unit for which the Hit Tests were made suffer a Hit - these Hits must form a new Fire Group or Strike Group, referred to as the ‘Misfire Group’.
Once the current Shooting Attack and any Reactions triggered by it have been fully resolved, the Misfire Group must be resolved. A Misfire Group is resolved in the same way as any other Fire Group or Strike Group, using the Profile of the Weapon used for the Fire Group or Strike Group it was created from. Wounds, Glancing Hits or Penetrating Hits from this Misfire Group are allocated by the Controlling Player, and must be allocated to a Model that made attacks as part of the Fire Group or Strike Group that generated the Misfire Group. If a Hit from a Misfire Group is generated by an attack made by a Model with the Vehicle Type, then it is resolved against the lowest Armour Value from all of the Model’s facings.
Hits, wounds or Casualties inflicted upon a Unit as a result of this Special Rule do not cause Leadership or Cool Checks, and Hits inflicted as part of a Misfire Group do not trigger any Special Rules that take effect as a result of a certain value on a Hit Test.
Template
Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.
Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.
Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.
Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.
Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.
OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.
An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.
An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Army List
Datasheets collatedFaction Rules
• Wargear
Bulky (X)
Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.
Models with the Bulky (X) Special Rule take up more space on Transport Models.A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Player
A Player is the actual person moving Models and making rolls, the Player of the game. Battles will include more than one Player, and the Rules will often refer to the Active Player (the Player currently taking their Player Turn) and the Reactive Player (the Player not currently taking their Player Turn, and thus only allowed to interact with the game through Reactions) in order to differentiate between them. Sometimes the Rules will also refer to the Controlling Player, that is the Player that Controls the Unit, Model or other game element the Rule is referring to.
Heavy
Intended to break the lines of the foe or to hold the most dangerous of positions, heavy troops trade speed and manoeuvrability for indomitable toughness and stubborn tenacity.
The following Rules apply to all Models with the Heavy Sub-Type:- A Unit that includes only Models with the Heavy Sub-Type gains a bonus of +1 to its Cool Characteristic for Checks to avoid gaining Tactical Statuses.
- A Unit that includes any Models with the Heavy Sub-Type may not Rush.
- A Unit that includes any Models with the Heavy Sub-Type only uses its Movement Characteristic to determine how far it moves as part of a Set-up Move, not Movement and Initiative totalled.
Implacable Advance
The wargear of many Legiones Astartes warriors and war machines incorporates a variety of targeting and stabilisation systems, enabling larger weaponry to be brought to bear even at close ranges.
Models with this Special Rule can make Volley Attacks with other Weapons.The Controlling Player of a Model with this Special Rule treats all Ranged Weapons such a Model has that do not have any variant of the Heavy (X) Special Rule or Ordnance (X) Special Rule as having the Assault Trait.
Slow and Purposeful
Many warriors are steady but sure, slow to advance but no less deadly for it.
Models with this Special Rule cannot Pursue fleeing enemy Units.In Step 4 of the Resolution Sub-Phase, a Player that has won Combat cannot choose for a Unit that includes any Models with this Special Rule to Pursue, and must instead select another eligible option for that Unit.
Command
Representing the elite of any army, commanders oversee the disposition of their troops, set strategy for the coming battle and often stand at the forefront of the conflict. The actions of such heroes can change the tide of battle in an instant.
The following Rules apply to all Models with the Command Sub-Type:- A Model with the Command Sub-Type may join and leave Units.
- A Model with the Command Sub-Type may Issue and Accept Challenges.
- The Controlling Player of a Unit that includes one or more Models with the Command Sub-Type may use the Characteristics of one of those Models to resolve any Characteristic Checks made for that Unit.
Deep Strike
Deep strike deployments are usually conducted en-masse and at a distance from the enemy, lest the attacking force be destroyed in detail as it lands.
The Deep Strike Special Rule allows a Unit to enter play anywhere on the Battlefield.A Unit that includes only Models with the Deep Strike Special Rule that enters play from Reserves may make a Deep Strike instead of deploying as described in the Reserves Rules. No more than one Unit may attempt a Deep Strike in a given Player Turn. The Unit attempting a Deep Strike may have another Unit without the Deep Strike Special Rule Embarked upon it if the Deep Striking Unit includes Models with the Transport Sub-Type (note that some Missions may allow more Units to attempt a Deep Strike in the same Player Turn. This will be specifically noted in the Mission Special Rules section of that Mission). Note that in Missions where the Reserves Mission Special Rule is not in use, the Deep Strike Special Rule has no effect. Furthermore, Units may not make use of the Deep Strike Special Rule during the first Battle Turn, even if they enter play from Reserves.
To perform a Deep Strike, the Active Player must declare an Eligible Unit that has entered play from Reserves in the Reserves Sub-Phase as the Deep Striking Unit. The Active Player must then select one Model from that Unit and place it anywhere on the Battlefield. This Model must be placed at least 1" away from any enemy Model, Battlefield Edge or piece of Impassable Terrain. Once this first Model has been placed, the remaining Models in the Unit must be placed within Unit Coherency with at least one other Model in the same Unit and within 6" of the first Model placed. No Models may be placed within 1" of an enemy Model, any Battlefield Edge or a piece of Impassable Terrain. Any Models that cannot be placed using these Rules must be Removed as a Casualty immediately. This deployment must take place during the Reserves Sub-Phase, and a Unit that deploys as a Deep Strike may not move in the Move Sub-Phase of the same Player Turn or have a Charge declared for it in the Charge Sub-Phase of the same Player Turn, but may make Shooting Attacks as normal. A Unit that is Embarked on a Model that is deployed as part of a Deep Strike may Disembark during the Move Sub-Phase of the same Player Turn, but may not make any move other than the move made to Disembark and may not have a Charge declared for it in the Charge Sub-Phase of the same Player Turn.
Enemy Units may declare Intercept Reactions against a Unit deployed as part of a Deep Strike, but not Reposition Reactions.
This datasheet has Command Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:
Officer of the Line (X)
Some officers are not renowned for their skills in combat or for the great glories they have won, but rather for their steadfast leadership and skill in logistics. Often unassuming and under-appreciated, it is these warriors that hold the armies of the Imperium together and only the most foolish general will overlook them in favour of more vainglorious officers.
Models with this Special Rule allow more Auxiliary Detachments to be included in an Army.If a Model with this Special Rule is selected to fill a Command Slot in any Detachment in the Crusade Force Organisation Chart, then the Controlling Player may select a number of Auxiliary Detachments equal to the value of X in the specific variant of this Special Rule instead of just one.
Reserves
Various Rules will allow or require Players to place Units in Reserves. Reserves is an area outside of the bounds of the Battlefield - Models that are in Reserves may not be selected or attacked during any Player’s Turn, but do not count as having been Removed as Casualties. Models that are in Reserves should be kept near the Battlefield, but separate from any Models Removed as Casualties and must be made known to all other Players in the game.While Units are in Reserves, the Controlling Player may freely declare that Units in Reserves have Embarked upon another friendly Unit that is in Reserves if the Unit would normally be capable of doing so. Likewise, Models in Reserves that are capable of joining or leaving Units may join or leave a friendly Unit that is also in Reserves freely by means of the Controlling Player declaring it is so.
Entering Battle From Reserves
In the Reserves Sub-Phase of the Active Player’s Movement Phase, each Unit that the Active Player has in Reserves must take a Reserves Test. See Rules for taking Reserves Test and moving Models into play from Reserves.
Entering Reserves from the Battlefield
A Unit may only enter Reserves from the Battlefield if a Special Rule allows it to do so. Where this is the case, the Special Rule in question will detail how this is accomplished. The only Core Rules that allow Models to enter Reserves from the Battlefield are those for Models with the Flyer Sub-Type.
In general Models may not move ‘off of the Battlefield’, and moving to the Battlefield Edge does not allow a Unit to enter Reserves.
Plasma blaster
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Plasma blaster | |||||||
| Plasma blaster | |||||||
| - Sustained fire | |||||||
| - Sustained fire | 18 | 2 | 7 | 4 | 1 | Breaching (6+) | Plasma |
| - Maximal fire | |||||||
| - Maximal fire | 18 | 2 | 8 | 4 | 1 | Breaching (5+), Overload (1) | Plasma |
Explodes (X)
Volatile fuel, overpowered reactors or dangerous munitions can cause some war engines to explode when destroyed. Such explosions can prove devastating to friend and foe alike.
A Model with this Special Rule can explode and cause Hits to nearby Models and Units.Before a Model with the Explodes (X) Special Rule is Removed as a Casualty, the Controlling Player must roll a Dice. If the result of that roll equals or exceeds the value of X attached to this variant of the Explodes (X) Special Rule, the Model explodes. Every Unit with one or more Models within 6" of an exploding Model suffers a number of Hits equal to the Base Wounds Characteristic or Base Hull Points Characteristic of the exploding Model. Each such Hit has a Strength of 8, an AP of ‘-’ and a Damage of 1. Once all Hits caused by this Special Rule have been resolved, the Model with the Explodes (X) Special Rule is Removed as a Casualty as normal.
Moved vs Stationary
In order to have moved, one or more Models in a Unit must end the Movement Phase in a different position than that which they started the Phase. A Model cannot be ‘moved’ in such a fashion that it ends its ‘move’ in the same position as it began the move. In cases where the distance a Model has been moved is important to a Rule, only the distance between that Model’s position at the start of the Movement Phase and its position at the end of the Movement Phase is counted. When determining this distance, if the direct line between a Model’s starting position and current position passes through an Area of Impassable Terrain or other obstacle through which a Model cannot move, then count the distance of the Model’s path of movement around the obstacle rather than the direct line between its start and end positions. If, when a Player has the option of moving a Unit, they choose not to move any of the Models in that Unit, and no Models in the Unit otherwise change position on the Battlefield, other than to pivot in place, then that Unit is considered to be Stationary.
Firing Protocols (X)
By skill, technological aid or sheer brute strength, this warrior is capable of making use of more than one weapon when engaging the foe at range. Though far from efficient, such an assault is capable of overwhelming the foe with sheer firepower.
A Model with the Firing Protocols (X) Special Rule may attack with more than one ranged Weapon.A Model with the Firing Protocols (X) Special Rule that makes attacks as part of a Shooting Attack, may make attacks with a number of Weapons equal to the value of X attached to the specific variant of the Firing Protocols (X) Special Rule. The Model must have more than one Ranged Weapon to make use of this Special Rule and may not use the same Weapon more than once in the same Shooting Attack.
Thermal Diffraction Field
Constructed by a series of armour-mounted generators, these layered energy shields diffuse heat energy around the bearer, protecting them from lethal energy strikes.
Thermal diffraction fields reduce the Damage of wounds inflicted by Weapons with specific Traits.A Model with a thermal diffraction field reduces the Strength of all Hits inflicted on it by Weapons with the Las, Plasma, Melta and Flame Trait by -1. In addition, when any Misfire Groups are generated by a Model with a thermal diffraction field as a result of the Overload (X) Special Rule, any instance of the Breaching (X) Special Rule on those Hits will only take effect on a Wound Test result of 6+, regardless of the value of X.
Barrage (X)
Long range artillery fire is the terror of any infantry advance, striking its targets no matter what cover they seek or where they attempt to take shelter.
A Weapon with this Special Rule may be used to attack Target Units out of Line of Sight.If a Unit for which a Shooting Attack is made includes any Models with one or more Weapons with this Special Rule, then in Step 2 of the Shooting Attack process they may ignore the restriction on requiring Line of Sight to a Target Unit. If a Player uses this Special Rule to declare a Shooting Attack on a Unit that the attacking Unit cannot draw a Line of Sight to, then in Step 3 of the Shooting Attack process that Player may only declare attacks with Weapons that have this Special Rule.
If a Weapon with this Special Rule and the Blast (X) Special Rule is used to attack a Unit without Line of Sight to that Unit, then no Hit Test is made and an Indirect Scatter Roll must be made for the Blast Marker placed as part of the attack. If such a Weapon makes more than a single attack then a separate Indirect Scatter Roll is made for each attack. When making an Indirect Scatter Roll for such an attack, the number of Dice rolled alongside the Scatter Dice is determined by the value of X for the Weapon with the Barrage (X) Special Rule, the value of these Dice is then totalled to find the distance the attack Scatters.
Plasma bombard
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Plasma bombard | |||||||
| Plasma bombard | |||||||
| - Sustained fire | |||||||
| - Sustained fire | 24 | 1 | 6 | 4 | 1 | Blast (3"), Barrage (1), Breaching (6+) | Plasma |
| - Maximal fire | |||||||
| - Maximal fire | 24 | 1 | 7 | 4 | 1 | Blast (3"), Barrage (1), Breaching (5+), Overload (2) | Plasma |
Saturnine disruption fist
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Saturnine disruption fist | |||||||
| Saturnine disruption fist | -2 | A | +2 | 2 | 3 | - | Power |
Occulix Targeting Auspex
Incorporating a potent machine spirit, this system allows the wearer to track targets for multiple heavy weapon systems at once, at the cost of mobility.
When a Model with an occulix targeting auspex is selected to make a Shooting Attack, if that Model’s Unit remained Stationary in the Controlling Player’s preceding Movement Phase, that Model gains the Firing Protocols (2) Special Rule until the Shooting Attack is fully resolved.Twin heavy disintegrator
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Twin heavy disintegrator | |||||||
| Twin heavy disintegrator | 24 | 2 | 7 | 2 | 2 | Overload (2) | Disintegrator |
Particle shredder
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Particle shredder | |||||||
| Particle shredder | Template | 1 | 6 | 3 | 1 | Template, Breaching (6+), Overload (1) | Assault, Particle |
Saturnine Teleportation Transponder
Saturnine Terminators are unable to make full use of standard pattern teleportariums found on most Legiones Astartes warships. Due to the complex energy dissipation equipment incorporated in their wargear, specialised transponders are required to prevent catastrophic teleportation incidents.
A Model with a Saturnine teleportation transponder has the Deep Strike Special Rule. While such a Model has joined a Saturnine Terminator Squad Unit in Reserves, Saturnine Terminator and Saturnine Terminator Sergeant Models in that Unit also gain the Deep Strike Special Rule.Saturnine Teleport Synchroniser
Set into the immense pauldrons which characterise Saturnine terminator armour, teleport synchronisers link to the teleportation transponders of senior officers, permitting mass teleport assaults by Saturnine-equipped warriors.
A Model with a Saturnine teleport synchroniser that is in Reserves gains the Deep Strike Special Rule if its Unit has been joined by a Model with a Saturnine teleportation transponder.