Legiones Astartes – Araknae Quad Accelerator Platform
- Araknae Quad Accelerator Platform 125 Points
UNIT COMPOSITION: 1 QUAD ACCELERATOR PLATFORM
Deployable fortifications were used by the Space Marine Legions, comprising of a number of standardised modular components that could be dropped from orbiting vessels and rapidly assembled into networks of defences and support structures that would form the footholds upon which the advance of the Legion was made. Primary amongst these components were gun emplacements mounted with versatile cannon arrays, intended to provide a beaten zone spanning both the land and the air, holding back the advance of the enemy and allowing other Legionary assets to establish their own positions deep in the heart of contested territory.
| Armour | Transport Capacity | ||||||
| M | BS | Front | Side | Rear | HP | ||
| Quad Accelerator Platform (⌀Use model) | |||||||
| Quad Accelerator Platform (⌀Use model) | - | 4 | 12 | 12 | 12 | 5 | - |
WARGEAR
- Turret Mounted quad accelerator autocannon
- Atomantic pavise
TRAITS
- [Allegiance]
- [Legiones Astartes]
WARGEAR
Atomantic pavise
This device, adapted from the atomantic shields commonly found on Dreadnoughts, projects an energy screen at a short distance, providing protection not only for the war machine it is mounted upon, but also for nearby troops.
Models wholly within 3" of this Model have a 5+ Invulnerable Save against Shooting Attacks.SPECIAL RULES
Gun Emplacement
Mounted on a static cruciform carriage, this emplacement provides a stable firing platform for the armoured turret above.
A Model with this Special Rule has special restrictions that apply when ranges are measured to and from it.The hull of a Model with this Special Rule is only considered to be the central turret. The outriggers that form the gun carriage are ignored for all purposes.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.
In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.
While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
The [Allegiance] Trait is used in the following Legiones Astartes datasheets:
The [Legiones Astartes] Trait is used in the following Legiones Astartes datasheets:
Breaching (X)
Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.
With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.
A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Army List
Datasheets collatedFaction Rules
• Wargear
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Invulnerable Tests
Invulnerable Saves are listed as a Characteristic on each Model’s Profile, and can also be applied by Special Rules or Wargear.If a Model cannot have an Armour Test or Cover Test made for it, or the Controlling Player chooses not to make an Armour Test or a Cover Test, but has access to an Invulnerable Save then that Saving Throw may be made instead of an Armour Test or a Cover Test. An Invulnerable Test is resolved in exactly the same manner as an Armour Test. Note that Invulnerable Tests are not affected by the AP value of a wound, however a Model may not have a Invulnerable Test made for it if:
- A Special Rule or other effect attached to the wound specifies that it ignores Invulnerable Tests or that no Invulnerable Test may be made.
- An Invulnerable Test may be taken to discard a Penetrating Hit if one is available to the Model.
No more than one Saving Throw of any kind may be made for a given wound or Penetrating Hit. If more than one type of Saving Throw is available then the Controlling Player must select one Saving Throw to make, and may not make any other Saving Throws for that wound or Penetrating Hit - if multiple wounds of the same value or Penetrating Hits are to be resolved then the same type of Saving Throw does not have to be used to resolve them, but this may prove easier and quicker in practice.
Armour (Front, Side, Rear) – This Characteristic will often be presented with various separate Sub-Characteristics, one for each of the Model’s Facings (see the Vehicles and Damage). Each of these Sub-Characteristics is used to determine the effect of a Model’s armour and how hard it is to defeat. When any Armour Sub-Characteristic reaches 0, then any Hit on that facing will result in an automatic Penetrating Hit without any Dice being rolled (if the Hit could have triggered a variable Special Rule, then that Rule is considered to automatically activate as part of the Hit).
Hull Points (HP) – The Hull Points Characteristic is primarily used to determine a Model with the Vehicle Type’s capacity for receiving damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Hull Points Characteristic is reduced to 0 that Model is removed from play as a Casualty, see the Rules for Destroyed Vehicles here.
Defensive Weapons – All Weapons on a Model with the Vehicle Type that have a Strength Characteristic of 6 or less are Defensive Weapons. Other Weapons may also be specifically designated as Defensive Weapons on their profile. When a Player chooses to have a Model with the Vehicle Type attack multiple different Units in the same Shooting Phase, Defensive Weapons do not have to make their attacks as Snap Shots.
Explodes (X)
Volatile fuel, overpowered reactors or dangerous munitions can cause some war engines to explode when destroyed. Such explosions can prove devastating to friend and foe alike.
A Model with this Special Rule can explode and cause Hits to nearby Models and Units.Before a Model with the Explodes (X) Special Rule is Removed as a Casualty, the Controlling Player must roll a Dice. If the result of that roll equals or exceeds the value of X attached to this variant of the Explodes (X) Special Rule, the Model explodes. Every Unit with one or more Models within 6" of an exploding Model suffers a number of Hits equal to the Base Wounds Characteristic or Base Hull Points Characteristic of the exploding Model. Each such Hit has a Strength of 8, an AP of ‘-’ and a Damage of 1. Once all Hits caused by this Special Rule have been resolved, the Model with the Explodes (X) Special Rule is Removed as a Casualty as normal.
Skyfire
Most combat aircraft fly at such speeds that regular weaponry is hard pressed to track or hit them. Only cannon and beams specifically designed to strike such swift targets have any hope of landing hits upon them by any means other than sheer luck.
Attacks made with the Skyfire Special Rule ignore penalties when attacking Flyers.A Hit Test made for a Weapon with the Skyfire Special Rule ignores any rule that would require attacks made targeting an enemy Unit that contains any Models with the Flyer Sub-Type to be made as Snap Shots. Instead such an attack makes a normal Hit Test using the Ballistic Skill of the attacking Model - this includes attacks made as part of any Reaction. A Unit that includes any Models with any Tactical Status may not benefit from the effects of this Special Rule.
This datasheet has Support Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:
Turret Mounted – Turret Mounted Weapons may attack targets in any Hull arc (Front, Left, Right or Rear) without restriction.
Rapid Tracking
Some weapons feature augmented motility and enhanced targeting systems, able to track and lock onto fast moving targets with ease.
Weapons with this Special Rule are better able to utilise it for intercepting new arrivals on the Battlefield.Each time a Model makes a Shooting Attack as part of the Intercept Advanced Reaction, its Controlling Player can select a Weapon with this Special Rule for that Shooting Attack, even if it is not a Defensive Weapon.
Quad accelerator autocannon
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Quad accelerator autocannon | |||||||
| Quad accelerator autocannon | 48 | 10 | 7 | 4 | 2 | Breaching (6+), Rapid Tracking, Skyfire | Auto |
Atomantic pavise
This device, adapted from the atomantic shields commonly found on Dreadnoughts, projects an energy screen at a short distance, providing protection not only for the war machine it is mounted upon, but also for nearby troops.
Models wholly within 3" of this Model have a 5+ Invulnerable Save against Shooting Attacks.Gun Emplacement
Mounted on a static cruciform carriage, this emplacement provides a stable firing platform for the armoured turret above.
A Model with this Special Rule has special restrictions that apply when ranges are measured to and from it.The hull of a Model with this Special Rule is only considered to be the central turret. The outriggers that form the gun carriage are ignored for all purposes.