Ossiarch Bonereapers – Nightmare Predator
8" 7 5+ 7+ 6+ The Nightmare Predator is a looming conjuration of Shyishan magic that takes the form of a disturbing terror. It floats eerily through the air towards its master's chosen prey, lacerating the flesh of its screaming victims with claws the size of sickles before stripping them to the bone. | ||
| MELEE WEAPONS | Atk | Hit | Wnd | Rnd | Dmg | ||
| Lacerating Claws | |||||||
| Lacerating Claws | 6 | 4+ | 2+ | 2 | 2 | ||
 End of Any Turn |
DEATH INCARNATE: Even when destroyed, the nightmare predator reforms to continue tormenting its enemies.
Effect: If this MANIFESTATION was destroyed or banished this turn and the unit that summoned it is on the battlefield, roll a dice. Add 1 to the roll if any enemy models were slain by this MANIFESTATION’s combat attacks this turn. On a 4+, set up this MANIFESTATION again, wholly within 12" of the unit that summoned it and more than 9" from all enemy units. That unit has summoned that MANIFESTATION.
KEYWORDS | MANIFESTATION, ENDLESS SPELL, FLY, WARD (6+) |
| DEATH, OSSIARCH BONEREAPERS |
Universal Core Abilities - Charge Phase
 Your Charge Phase |
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.
Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
| KEYWORDS | CORE, MOVE, CHARGE |
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
18.1 Ward Saves
Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect. Passive |
WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.
Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.
The WARD keyword is used in the following Ossiarch Bonereapers warscrolls:
The DEATH keyword is used in the following Ossiarch Bonereapers warscrolls:
The OSSIARCH BONEREAPERS keyword is used in the following Ossiarch Bonereapers warscrolls:
Army List
Warscrolls collatedCavalry Hero
Infantry Hero
Monster Hero
War Machine Hero
Beast
Cavalry
Infantry
Faction Terrain
Regiment of Renown
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
| ||
| In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes. | ||
Shooting attacks
Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).Combat attacks
Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.1.0 Wizards and Priests
WIZARDS are special units that can cast spells, and PRIESTS are special units that can chant prayers. Spells and prayers are powerful abilities that can have a dramatic impact on the battle.
15.4 Flying
Units with the FLY keyword have the following passive ability:| Passive |
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.
Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
| When moving flying units, move them horizontally in any direction, ignoring intervening models and terrain, and place them where you wish, so long as they are allowed to end their move on that spot. Note that some units have the FLY keyword even if that unit can’t really fly. This often represents units that bounce, bound or skitter across the battlefield so adeptly that they might as well be flying! | ||
The FLY keyword is used in the following Ossiarch Bonereapers warscrolls:
18.4 Destroyed Units
When the last model in a unit is slain, the unit is destroyed and all remaining damage points inflicted on that unit have no effect. Similarly, if something causes a unit to be destroyed, all models in the unit are slain and removed from play.
16.0 Picking Targets
When declaring an ATTACK ability for a unit, you must pick the target unit(s) for its attacks. The number of attacks each model can make is equal to the Attacks characteristic of the weapons it is using. In most cases, models attack with every weapon on their warscroll (melee weapons for combat attacks, ranged weapons for shooting attacks), though some warscrolls specify that certain models in the unit are armed with special weapons or that the unit must pick between multiple weapons when it attacks.If the unit is in combat, it can only target units that are in combat with it. If a model has more than one attack, you can split the attacks between eligible targets as you wish.
- Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.
- Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).
 Your Shooting Phase |
SHOOT: The warriors take aim and unleash a deadly volley.
Declare: Pick a friendly unit that has not used a RUN or RETREAT ability this turn to use this ability. Then, pick one or more enemy units as the target(s) of that unit’s attacks (see 16.0).
Effect: Resolve shooting attacks against the target unit(s).
Effect: Resolve shooting attacks against the target unit(s).
| KEYWORDS | CORE, ATTACK, SHOOT |
 Any Combat Phase |
FIGHT: Locked in a deadly melee, the fighters strike out at their foes.
Declare: Pick a friendly unit that is in combat or that charged this turn to use this ability. That unit can make a pile-in move. Then, if that unit is in combat, you must pick one or more enemy units as the target(s) of that unit’s attacks.
Effect: Resolve combat attacks against the target unit(s).
Effect: Resolve combat attacks against the target unit(s).
| KEYWORDS | CORE, ATTACK, FIGHT |
7.0 Manifestations
There are two types of manifestation: endless spells, which can be summoned by WIZARDS, and invocations, which can be summoned by PRIESTS. Each manifestation has its own warscroll, and the spell or prayer that allows that manifestation to be summoned will be found in the appropriate manifestation lore. No more than 1 friendly WIZARD or PRIEST can attempt to summon the same manifestation per turn, and a friendly WIZARD or PRIEST cannot attempt to summon a friendly manifestation that was removed from play in the same turn.
|
|
|
The MANIFESTATION keyword is used in the following Ossiarch Bonereapers warscrolls:
The ENDLESS SPELL keyword is used in the following Ossiarch Bonereapers warscrolls:
7.2 Banishing Manifestations
Instead of using a SPELL or PRAYER ability (including when using the ‘Magical Intervention’ ability), each WIZARD and PRIEST can use the ‘Banish Manifestation’ ability: Your Hero Phase |
BANISH MANIFESTATION: The wizard or priest disrupts the arcane forces sustaining a manifestation, wiping it from existence.
Declare: Pick a friendly WIZARD or PRIEST to use this ability, pick a MANIFESTATION within 30" of them that was not summoned this turn to be the target, then make a banishment roll of 2D6. Add 1 to the banishment roll for each additional enemy MANIFESTATION on the battlefield after the first. You cannot pick the same MANIFESTATION to be the target of this ability more than once per turn.
Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
| KEYWORDS | BANISH |