Slaves to Darkness – Fiends
10" 4 5+ 1 6+ Horrific nightmares given bestial shape, Fiends of Slaanesh emit a harsh, trilling call as they race towards their prey. A dream-inducing scent hangs thick around the Fiends, reducing their foes to a stupor and sapping them of their will to fight. | ||
| MELEE WEAPONS | Atk | Hit | Wnd | Rnd | Dmg | ||
| Deadly Pincers and Barbed Stinger [Anti-MONSTER (+1 Rend), Companion] | |||||||
| Deadly Pincers and Barbed Stinger Anti-MONSTER (+1 Rend), Companion | 4 | 4+ | 3+ | 1 | D3 | ||
This unit can only be taken in a Legion of the First Prince Army of Renown
 Once Per Turn (Army), Any Combat Phase |
SOPORIFIC MUSK: A Fiend exudes a pervasive and oily musk that
numbs a foe to all but the most extreme of stimuli.
Declare: Pick an enemy unit in combat with this unit to be the target.
Effect: Roll a dice. On a 4+, the target has STRIKE-LAST for the rest of the turn.
numbs a foe to all but the most extreme of stimuli.
Effect: Roll a dice. On a 4+, the target has STRIKE-LAST for the rest of the turn.
 Passive |
DISRUPTIVE SONG: Fiends of Slaanesh let out a keening song that
disturbs the concentration of spellcasters who hear it.
Effect: Subtract 1 from casting rolls and unbinding rolls for enemy WIZARDS while they are within 12" of this unit.
disturbs the concentration of spellcasters who hear it.
 Passive |
BEASTEffect: This unit has a maximum control score of 1.
KEYWORDS | WARD (6+), BEAST, CHAMPION |
| CHAOS, DAEMON, SLAVES TO DARKNESS, LEGION OF THE FIRST PRINCE |
Companion
Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).1.0 Champions
Units with the CHAMPION keyword have one or more champion models. If there is a number after the CHAMPION keyword, that number indicates the proportion of models in that unit that can be champions. In any other case, 1 model in the unit can be a champion. Units with the CHAMPION keyword have the following passive ability: Passive |
CHAMPION: A veteran fighter leads the charge.
Effect: Add 1 to the Attacks characteristic of weapons used by champions in this unit. If this unit is a BEAST, this ability affects this unit’s Companion weapons.
Errata
Champion
Change the definition of Champion to:
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’
The CHAMPION keyword is used in the following Slaves to Darkness warscrolls:
Beast
Infantry
32.2 Objective Control
In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:- Starting with the active player, each player determines the control score of each of their units that is contesting that objective. A unit’s control score is the combined Control characteristics of all the models in that unit that are contesting the objective. Some abilities modify a unit’s control score, but it cannot be reduced to less than 1.
- Each player adds up the control scores of all of their units contesting that objective. This is their army control score for that objective.
- The players compare their army control scores for that objective. If one player’s score is higher, that player gains control of that objective. Once a player gains control of an objective, it remains under their control until their opponent gains control of it.
| Sometimes objective markers get accidentally nudged while you are moving models around. This is perfectly fine - just remember to put them back in their proper positions when determining objective control. | ||
Errata
32.2 Objective Control
Change the first sentence to:
‘In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:’
‘In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:’
The CHAOS keyword is used in the following Slaves to Darkness warscrolls:
Cavalry Hero
Infantry Hero
Monster Hero
War Machine Hero
Infantry
The SLAVES TO DARKNESS keyword is used in the following Slaves to Darkness warscrolls:
Cavalry Hero
Infantry Hero
Monster Hero
War Machine Hero
Infantry
18.1 Ward Saves
Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect.| Passive |
WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.
Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.
Hit Roll
Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.| Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities). | ||
Cover
Subtract 1 from hit rolls for attacks that target a unit that is behind or wholly on this terrain feature, unless that unit charged this turn or has the FLY keyword.17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
 Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
| Passive |
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.
Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
Obscuring
While every model in a non-MONSTER non‐WAR MACHINE unit that does not have the FLY keyword is within 1" of this terrain feature, the following apply:- That unit is only visible to enemy units that are within its combat range.
- The Range characteristic of that unit’s ranged weapons is halved (rounding down to the nearest inch).
Unstable
Models can move across but cannot be set up on or end any type of move on any part of this terrain feature that is more than 1" tall.1.4.2 Obscuring Terrain
Examples: Wyldwood, fortress wallTerrain Abilities: Cover, Obscuring, Unstable
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
| ||
| In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes. | ||
FAQ / Errata
FAQ
| Q: | If a non-FLY INFANTRY HERO (e.g. a Scinari Cathallar) is a Shrine Guardian of a Shrine Luminor, and that Shrine Guardian is within 1" of an obscuring terrain feature, is the Shrine Guardian visible to enemy abilities that target the Shrine Guardian? |
| A: | Yes. |
Errata
6.0 Visibility
Add the following:
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
The DAEMON keyword is used in the following Slaves to Darkness warscrolls:
Cavalry Hero
Cavalry
War Machine
Anti-X (+1 Rend)
Add 1 to this weapon’s Rend characteristic if the target has the keyword after ‘Anti-’ or fulfils the condition after ‘Anti-’. Multiples of this ability are cumulative. For example, if a weapon has both Anti-charge (+1 Rend) and Anti-HERO (+1 Rend), then add 2 to the Rend characteristic of the weapon for attacks that target a HERO that charged in the same turn.13.1 Fight Abilities
Abilities with the FIGHT keyword follow a different sequence to other abilities. When the players are using Combat Phase
abilities as described in 13.0, they cannot use FIGHT abilities.After the players have finished using
Combat Phase
abilities that are not FIGHT abilities, they must alternate picking 1 eligible unit to use a FIGHT ability, starting with the active player. Each unit in combat must use a FIGHT ability if it is able to.Once a player has no more units that are eligible to use a FIGHT ability, the other player continues to pick units that are eligible to use a FIGHT ability, one after another, until there are no more units that are eligible to use a FIGHT ability.
| ||
Errata
Addenda: fought
Add the following definition:
‘fought: A unit has fought if it used any FIGHT abilities in the same turn.’
‘fought: A unit has fought if it used any FIGHT abilities in the same turn.’
The WARD keyword is used in the following Slaves to Darkness warscrolls:
Cavalry Hero
Monster Hero
Cavalry
Monster
War Machine
15.3 Pile-in Moves
Some abilities, such as FIGHT abilities, allow a unit to make a short move called a pile-in move to get into a better position for combat. To do so:If your unit is in combat: Pick an enemy unit your unit is in combat with to be the target of the pile-in move. Each model in your unit can move up to 3". That move can pass through the combat ranges of any enemy units, but each model must end that move no further from the target unit. At the end of the move, your unit must still be in combat with all units that it was in combat with at the start of the move.
If your unit is not in combat: Each model in your unit can move 3" in any direction. That move can pass through and end within the combat ranges of any enemy units.
| ||
19.0 Strike-first and Strike-last
If there are any STRIKE-FIRST units in combat after any non-FIGHT combat phase abilities have been used, other units cannot be picked to use a FIGHT ability until those units have been picked to use a FIGHT ability. After all those STRIKE-FIRST units have fought, the active player picks the next unit to fight.If there are any STRIKE-LAST units in combat, they cannot be picked to use a FIGHT ability if there are any units in combat that do not have STRIKE-LAST and have not yet used a FIGHT ability.
If a unit has STRIKE-FIRST and STRIKE-LAST, treat it as if it had neither.
| There may be situations when a unit that has STRIKE-FIRST is not in combat at the start of the phase, but because of moves such as pile-in moves, it is ‘pulled into combat’ later in the phase. In such cases, STRIKE-FIRST has no effect on that unit because it was not in combat at the start of the phase. Abilities that allow a unit to use a FIGHT ability immediately after another unit do not override the STRIKE-FIRST or STRIKE-LAST constraints, so you could not pick a unit with STRIKE-LAST to fight immediately after a unit with STRIKE-FIRST. | ||
FAQ / Errata
FAQ
| Q: | Can I use an ability that allows a friendly unit that does not have STRIKE-FIRST to fight immediately after a friendly unit that has STRIKE-FIRST if there are one or more enemy units with STRIKE-FIRST that have not yet been picked to fight? |
| A: | No. As mentioned in the sidebar next to 19.0, abilities that allow a unit to use a FIGHT ability immediately after another unit do not override the STRIKE-FIRST constraints, so you cannot pick a unit that does not have STRIKE-FIRST to fight until all other units that have STRIKE-FIRST have fought. |
| Q: | If a friendly unit is the only unit that has STRIKE-FIRST on the battlefield and it has an ability that allows a friendly unit to fight immediately after it, in what order would units be picked to fight? |
| A: | If you are the active player, the unit that has STRIKE-FIRST would fight first, then you could use the ability to allow another friendly unit to fight immediately after it, and then you would pick the next unit to fight (i.e. three friendly units would fight back to back). If your opponent is the active player, the unit that has STRIKE-FIRST would fight first, you could still use the ability to allow another friendly unit to fight, and then your opponent would pick the next unit to fight. |
| Q: | In the combat phase, if all eligible non-STRIKE‑LAST units have used a FIGHT ability, which player gets to pick the first STRIKE-LAST unit to fight? |
| A: | The alternating sequence of picking units to use a FIGHT ability would continue and so the player who did not pick the last non-STRIKE-LAST unit would get to pick the first eligible STRIKE-LAST unit in their army to use a FIGHT ability. |
Errata
19.0 STRIKE-FIRST and STRIKE-LAST
In the first sentence, replace ‘at the start of the phase’ with ‘after any non-FIGHT Combat Phase abilities have been used’.
STRIKE-LAST
Remove the following text from STRIKE-LAST:
‘If both players have units with STRIKE-LAST, they alternate fighting with those units after all other eligible units have fought, starting with the active player.’
‘If both players have units with STRIKE-LAST, they alternate fighting with those units after all other eligible units have fought, starting with the active player.’
STRIKE-LAST
In the glossary entry for STRIKE-LAST, remove ‘, starting with the active player’.
2.0 Spells
The declare step of each spell will tell you to make a casting roll of 2D6. If the roll does not equal or exceed the spell’s casting value (at the top-right corner of the spell), the spell fails and its effect is not resolved.If the unmodified casting roll includes 2 or more rolls of 1, the spell is miscast: the spell fails, its effect is not resolved, D3 mortal damage is inflicted on the WIZARD that used it, and that WIZARD cannot use any more spells in that phase.
Enemy reactions can only be used if the casting roll equals or exceeds the spell’s casting value. So long as the spell is not unbound (see 4.0), then it is successfully cast: resolve its effect.
EXAMPLE SPELL
| Your Hero Phase | 6 |
MYSTIC SHIELD: The caster's allies are bathed in an unearthly glow that protects them from harm.
Declare: Pick a visible friendly unit wholly within 12" of this WIZARD to be the target. Then, make a casting roll of 2D6.
Effect: The target has WARD (6+) this turn.
Effect: The target has WARD (6+) this turn.
| KEYWORDS | SPELL |
The BEAST keyword is used in the following Slaves to Darkness warscrolls:
The LEGION OF THE FIRST PRINCE keyword is used in the following Slaves to Darkness warscrolls:
Cavalry
War Machine
Unbind
| Reaction: Opponent declared a SPELL ability |
UNBIND: The wizard saps the energy from an enemy’s spell, nullifying its effects.
Used By: A friendly WIZARD within 30" of the enemy WIZARD casting the spell.
Effect: Make an unbinding roll of 2D6. If the roll exceeds the casting roll for the spell, then the spell is unbound and its effect is not resolved. This reaction cannot be used more than once per casting roll.
Effect: Make an unbinding roll of 2D6. If the roll exceeds the casting roll for the spell, then the spell is unbound and its effect is not resolved. This reaction cannot be used more than once per casting roll.
| KEYWORDS | UNBIND |