Blades of Khorne – Scourge of Ghyran Bloodcrushers

This warscroll does not meet the selection criteria (see Settings tab).
•BLADES OF KHORNE WARSCROLL•
Scourge of Ghyran Bloodcrushers
10"
5
4+
2
6+
Some of Khorne’s daemons develop an obsession with bone-shattering cavalry combat. Riding into battle atop smoke-belching Juggernauts, they call themselves Bloodcrushers, and it is a name well earned. Rather than winding through the trees of the Everspring Swathe, they simply bulldoze a path forward, driving the panicked survivors of their rampage onto the axes of their Khornate kin.
•BLADES OF KHORNE WARSCROLL•
Scourge of Ghyran Bloodcrushers
Damage calculator
MELEE WEAPONS		AtkHitWndRndDmg
Bloodcrusher Hellblade [Charge (+1 Damage), Crit (Mortal), Blood-hungry]
Bloodcrusher Hellblade
Charge (+1 Damage), Crit (Mortal), Blood-hungry		23+3+11
Juggernaut’s Brazen Hooves [Anti-CAVALRY (+1 Rend), Companion]
Juggernaut’s Brazen Hooves
Anti-CAVALRY (+1 Rend), Companion		24+3+1D3
BATTLE PROFILE

Unit Size: 3      Points: 150
Base size: 90 × 52mm
Can be reinforced: Yes
Notes: This unit is legal for Matched Play for battles fought using the General’s Handbook 2025-26 battlepack.

Once Per Turn (Army), Any Charge Phase
BRASS STAMPEDE: Nothing forged of mortal flesh and bone can prevent a charge from a unit of Bloodcrushers.

Declare: If this unit charged this turn, pick an enemy unit in combat with it to be the target.

Effect: Roll a dice. On a 3+, this unit can move 2D6". It can pass through models in the target unit and must end that move in combat.

KEYWORDS
CAVALRY, CHAMPION, STANDARD BEARER (1/3), MUSICIAN (1/3), WARD (6+)
CHAOS, BLADES OF KHORNE, DAEMON
Shoot in Combat
This weapon can be used to make shooting attacks even if the attacking unit is in combat.
Once Per Turn (Army), Start of Any Turn
SKULLS FOR THE SKULL THRONE: ...only that it flows.

Effect: Pick a BLOOD TITHE ability that you have not unlocked and spend the number of blood tithe points required to unlock that ability (shown in the top-right corner of the ability). That BLOOD TITHE ability is now unlocked for the rest of the battle.
Your Charge Phase
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
KEYWORDSCORE, MOVE, CHARGE
Hit Roll
Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.

Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities).
Cover
Subtract 1 from hit rolls for attacks that target a unit that is behind or wholly on this terrain feature, unless that unit charged this turn or has the FLY keyword.
17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
Your Movement Phase
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.

Declare: Pick a friendly unit that is in combat to use this ability.

Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
KEYWORDSCORE, MOVE, RETREAT
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’

  • A unit’s combat range extends 3" out from every model in that unit.
  • If any enemy models are within a unit’s combat range and visible to it, that unit is in combat.

FAQ / Errata

FAQ
Q:If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model?
A:
No.
Errata
Addenda: 7.0 Combat Range
Add the following:

‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
Passive
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.

Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
Obscuring
While every model in a non-MONSTER non‐WAR MACHINE unit that does not have the FLY keyword is within 1" of this terrain feature, the following apply:
  • That unit is only visible to enemy units that are within its combat range.
  • The Range characteristic of that unit’s ranged weapons is halved (rounding down to the nearest inch).
Unstable
Models can move across but cannot be set up on or end any type of move on any part of this terrain feature that is more than 1" tall.
1.4.2 Obscuring Terrain
Examples: Wyldwood, fortress wall
Terrain Abilities: Cover, Obscuring, Unstable
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.
If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
  • If any part of another model can be seen by an observing model, both the target model and its unit are visible to that observing model.

In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes.

FAQ / Errata

FAQ
Q:If a non-FLY INFANTRY HERO (e.g. a Scinari Cathallar) is a Shrine Guardian of a Shrine Luminor, and that Shrine Guardian is within 1" of an obscuring terrain feature, is the Shrine Guardian visible to enemy abilities that target the Shrine Guardian?
A:
Yes.
Errata
6.0 Visibility
Add the following:

‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
Universal Core Abilities - Charge Phase
Your Charge Phase
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
KEYWORDSCORE, MOVE, CHARGE

14.3 Charge Phase
Your Charge Phase
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
KEYWORDSCORE, MOVE, CHARGE

FAQ

Q:When using the ‘Charge’ ability, does my unit need to end the charge move within 1⁄2" of an enemy unit that was visible to the charging unit at the start of that charge move?
A:
No. It must end the charge move within 1⁄2" of an enemy unit that is visible to the charging unit when it finishes that charge move.
Q:If an ability adds to or subtracts from the number of dice that make up a charge roll, is that a modifier to the charge roll?
A:
No.
18.4 Destroyed Units
When the last model in a unit is slain, the unit is destroyed and all remaining damage points inflicted on that unit have no effect. Similarly, if something causes a unit to be destroyed, all models in the unit are slain and removed from play.
Shooting attacks
Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).
16.0 Picking Targets
When declaring an ATTACK ability for a unit, you must pick the target unit(s) for its attacks. The number of attacks each model can make is equal to the Attacks characteristic of the weapons it is using. In most cases, models attack with every weapon on their warscroll (melee weapons for combat attacks, ranged weapons for shooting attacks), though some warscrolls specify that certain models in the unit are armed with special weapons or that the unit must pick between multiple weapons when it attacks.

If the unit is in combat, it can only target units that are in combat with it. If a model has more than one attack, you can split the attacks between eligible targets as you wish.
  • Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.

  • Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).

FAQ

Q:When making shooting attacks, can all models in the attacking unit shoot even if the target unit is not visible to some of those models?
A:
No, the only models in the attacking unit that can make shooting attacks are those that the target unit is visible to.
Q:When a unit uses a SHOOT ability, does it have to shoot with all of the ranged weapons that it is armed with?
A:
Yes.
Your Shooting Phase
SHOOT: The warriors take aim and unleash a deadly volley.

Declare: Pick a friendly unit that has not used a RUN or RETREAT ability this turn to use this ability. Then, pick one or more enemy units as the target(s) of that unit’s attacks (see 16.0).

Effect: Resolve shooting attacks against the target unit(s).
KEYWORDSCORE, ATTACK, SHOOT
Combat attacks
Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.
Any Combat Phase
FIGHT: Locked in a deadly melee, the fighters strike out at their foes.

Declare: Pick a friendly unit that is in combat or that charged this turn to use this ability. That unit can make a pile-in move. Then, if that unit is in combat, you must pick one or more enemy units as the target(s) of that unit’s attacks.

Effect: Resolve combat attacks against the target unit(s).
KEYWORDSCORE, ATTACK, FIGHT
7.0 Manifestations
There are two types of manifestation: endless spells, which can be summoned by WIZARDS, and invocations, which can be summoned by PRIESTS. Each manifestation has its own warscroll, and the spell or prayer that allows that manifestation to be summoned will be found in the appropriate manifestation lore. No more than 1 friendly WIZARD or PRIEST can attempt to summon the same manifestation per turn, and a friendly WIZARD or PRIEST cannot attempt to summon a friendly manifestation that was removed from play in the same turn.

Manifestations are not units but can be interacted with in similar ways, as explained next:
ALL MANIFESTATIONS
Models can move through them but cannot end a move on them.
Units can finish a charge move within ½" of an enemy manifestation instead of within ½" of an enemy unit.
They can be damaged and destroyed as if they were units but do not count as destroyed units for the purposes of battle tactics and abilities.
They are affected by all enemy abilities as if they were units.
They can use CORE abilities as if they were units, and they can use abilities on their warscroll. Unless specified otherwise, they cannot use and are not affected by any other friendly abilities, and they do not count as units for the purposes of battle tactics or friendly abilities.
They can only use the ‘Shoot’ or ‘Fight’ abilities if they have weapons of the appropriate type.
MANIFESTATIONS WITH A MOVE CHARACTERISTIC OF ‘-’
They cannot move.
They only count as being in combat in the combat phase, and enemy units only count as being in combat with them in the combat phase.
They cannot make shooting attacks with ranged weapons that do not have Shoot in Combat while there is a visible enemy unit within 3" of them.
MANIFESTATIONS WITH A MOVE CHARACTERISTIC GREATER THAN ‘-’
They are treated as if they were units for the purposes of movement, combat range, being in combat and setting up terrain features, other manifestations and other units.

1.0 Wizards and Priests
WIZARDS are special units that can cast spells, and PRIESTS are special units that can chant prayers. Spells and prayers are powerful abilities that can have a dramatic impact on the battle.
Banish Manifestation
Your Hero Phase
BANISH MANIFESTATION: The wizard or priest disrupts the arcane forces sustaining a manifestation, wiping it from existence.

Declare: Pick a friendly WIZARD or PRIEST to use this ability, pick a MANIFESTATION within 30" of them that was not summoned this turn to be the target, then make a banishment roll of 2D6. Add 1 to the banishment roll for each additional enemy MANIFESTATION on the battlefield after the first. You cannot pick the same MANIFESTATION to be the target of this ability more than once per turn.

Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
KEYWORDSBANISH

7.2 Banishing Manifestations
Instead of using a SPELL or PRAYER ability (including when using the ‘Magical Intervention’ ability), each WIZARD and PRIEST can use the ‘Banish Manifestation’ ability:

Your Hero Phase
BANISH MANIFESTATION: The wizard or priest disrupts the arcane forces sustaining a manifestation, wiping it from existence.

Declare: Pick a friendly WIZARD or PRIEST to use this ability, pick a MANIFESTATION within 30" of them that was not summoned this turn to be the target, then make a banishment roll of 2D6. Add 1 to the banishment roll for each additional enemy MANIFESTATION on the battlefield after the first. You cannot pick the same MANIFESTATION to be the target of this ability more than once per turn.

Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
KEYWORDSBANISH

Companion
Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).
Blood Tithe Abilities
Once Per Turn (Army), Reaction: You declared a CHARGE ability
0
MURDERLUST: When worthy opponents are near, the impulse to kill becomes all-consuming.

You do not need to unlock this ability to use it. It is already unlocked.

Effect: Roll a dice. You can replace one of the dice in the charge roll with that value. If you do so, inflict D3 mortal damage on the unit using that CHARGE ability after that ability is resolved.
KEYWORDSBLOOD TITHE

Once per Turn, Start of Any Turn
1
DIVINE SCORN: The battlefield is Khorne's temple, and Khorne's alone.

Declare: Pick up to 3 enemy WIZARDS or PRIESTS within 6" of any friendly BLADES OF KHORNE units to be the target(s).

Effect: Roll a dice for each target. On a 3+, subtract 1 from the target’s power level, to a minimum of 0, until the start of the next turn.
KEYWORDSBLOOD TITHE

Once Per Turn (Army), Your Combat Phase
1
PUNISH THE PACIFIST: To shirk from combat is to sin against the War God.

Declare: Each unit (friendly and enemy) and enemy MANIFESTATION that is not in combat is a target.

Effect: Roll a dice. On a 1-2, inflict 1 mortal damage on each target. On a 3+, inflict 1 mortal damage on each enemy target.
KEYWORDSBLOOD TITHE

Once Per Turn (Army), Your Hero Phase
2
MURDER THE MYSTIC: Those who cower behind conjured spellcraft will be punished severely.

You can only unlock this ability if you have unlocked ‘Divine Scorn’.

Declare: Pick up to 4 enemy MANIFESTATIONS to be the target(s).

Effect: Make a banishment roll of 2D6 for each target. If the banishment roll equals or exceeds the banishment value listed on that MANIFESTATION’s warscroll, inflict D3 mortal damage on each enemy unit within 3" of it and then it is banished and removed from play.
KEYWORDSBLOOD TITHE

Passive
2
GLORIOUS COMBAT OR NAUGHT: The air boils, charring arrows and melting musket shot.

You can only unlock this ability if you have unlocked ‘Divine Scorn’ or ‘Punish the Pacifist’.

Effect: Subtract 1 from hit rolls for shooting attacks that target friendly BLADES OF KHORNE units.
KEYWORDSBLOOD TITHE

Passive
3
REVEL IN BATTLE: No tricks - no deceptions.

You can only unlock this ability if you have unlocked ‘Punish the Pacifist’.

Effect: Other than the Companion weapon ability, weapon abilities for combat attacks made by enemy units that charged this turn and that target a friendly BLADES OF KHORNE unit have no effect.
KEYWORDSBLOOD TITHE

Passive
4
SLAUGHTER TRIUMPHANT: Khorne's fury floods the field, burning out all thought but to slay.

You can only unlock this ability if you have unlocked ‘Murder the Mystic’ or ‘Glorious Combat or Naught’.

Effect: Add 1 to the Attacks characteristic of weapons used by friendly BLADES OF KHORNE units that charged in the same turn.
KEYWORDSBLOOD TITHE

Passive
4
CLEAVE WIDE THE GRIN OF KHORNE: Gore begets gore, and death begets death.

You can only unlock this ability if you have already unlocked ‘Revel in Battle’ or ‘Glorious Combat or Naught’.

Effect: Add 1 to hit rolls for combat attacks made by friendly BLADES OF KHORNE units.
KEYWORDSBLOOD TITHE

Save Roll
The commander of the target unit rolls a dice, subtracting the attacking weapon’s Rend characteristic from the roll. Unmodified save rolls of 1 always fail. If the roll equals or exceeds the Save characteristic of the target unit, the attack fails and the attack sequence ends. If not, it is a successful attack: move on to the next step.

The BLOODBOUND keyword is used in the following Blades of Khorne warscrolls:

Beast Hero
• Scyla Anfingrimm
Cavalry Hero
• Lord of Khorne on Juggernaut
Infantry Hero
• Korghos Khul
• Skarr Bloodwrath
• Scourge of Ghyran Mighty Lord of Khorne
• Valkia The Bloody
Cavalry
Infantry
• Garrek’s Reavers
• Gorechosen of Dromm
• Kamandora’s Blades
• Magore’s Fiends
Monster
Crit (Mortal)
If an attack made with this weapon scores a critical hit, that attack inflicts mortal damage on the target unit equal to the Damage characteristic of that weapon and the attack sequence ends.

The non-MONSTER DAEMON keyword is used in the following Blades of Khorne warscrolls:

Beast Hero
• Karanak
Cavalry Hero
• Skullmaster, Herald of Khorne
Infantry Hero
• Khul Ascended
War Machine Hero
Beast
Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
War Machine

The MONSTER keyword is used in the following Blades of Khorne warscrolls:

Monster Hero
Monster
Battle Traits
Once Per Turn, Reaction: You declared the ‘Skulls for the Skull Throne’ ability
BLOOD-DRENCHED: As blood gushes down blades, armour and teeth, the fervent warriors of the Blood God are driven into a divine frenzy.

Effect: After that ability has been resolved, if you unlocked a BLOOD TITHE ability this turn, pick a friendly BLADES OF KHORNE unit to be the target. The following effects apply to the target for the rest of the battle:

Wild-eyed Brutality: Ignore positive modifiers to save rolls for the target.

Blood Haze: If the target is BLOODBOUND, its Blood-hungry weapons have Crit (Mortal).

Weapons of Murder: If the target is a non-MONSTER DAEMON unit, add 1 to the Rend characteristic of its Blood-hungry weapons, including Blood-hungry Companion weapons.

Bloodlords Supreme: If the target is a MONSTER, add 1 to the Damage characteristic of its Blood-hungry weapons.

Errata

Battle Traits
Change the timing of the ‘Blood-drenched’ ability to:
18.1 Ward Saves
Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect.

Passive
WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.

Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.

The WARD keyword is used in the following Blades of Khorne warscrolls:

Beast Hero
• Karanak
Cavalry Hero
• Skullmaster, Herald of Khorne
Infantry Hero
• Khul Ascended
• Korghos Khul
• Valkia The Bloody
Monster Hero
War Machine Hero
Beast
Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
War Machine
Manifestation

The CHAOS keyword is used in the following Blades of Khorne warscrolls:

Beast Hero
• Karanak
• Scyla Anfingrimm
Cavalry Hero
• Lord of Khorne on Juggernaut
• Skullmaster, Herald of Khorne
Infantry Hero
• Khul Ascended
• Korghos Khul
• Skarr Bloodwrath
• Scourge of Ghyran Mighty Lord of Khorne
• Valkia The Bloody
Monster Hero
War Machine Hero
Beast
Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
• Garrek’s Reavers
• Gorechosen of Dromm
• Kamandora’s Blades
• Magore’s Fiends
Monster
War Machine
Faction Terrain
Manifestation

The BLADES OF KHORNE keyword is used in the following Blades of Khorne warscrolls:

Beast Hero
• Karanak
• Scyla Anfingrimm
Cavalry Hero
• Lord of Khorne on Juggernaut
• Skullmaster, Herald of Khorne
Infantry Hero
• Khul Ascended
• Korghos Khul
• Skarr Bloodwrath
• Scourge of Ghyran Mighty Lord of Khorne
• Valkia The Bloody
Monster Hero
War Machine Hero
Beast
Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
• Garrek’s Reavers
• Gorechosen of Dromm
• Kamandora’s Blades
• Magore’s Fiends
Monster
War Machine
Faction Terrain
Manifestation

The DAEMON keyword is used in the following Blades of Khorne warscrolls:

Beast Hero
• Karanak
Cavalry Hero
• Skullmaster, Herald of Khorne
Infantry Hero
• Khul Ascended
Monster Hero
War Machine Hero
Beast
Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
War Machine
Faction Rules
• Battle Traits
• Battle Formations
• Heroic Traits
• Artefacts of Power
• Manifestation Lore
• Prayer Lore
• Gorechosen Champions
• The Baleful Lords
• PATH TO GLORY
• SPEARHEAD
• Fangs of the Blood God
• Bloodbound Gore Pilgrims
• Brazen Mutations

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
1.0 Champions
Units with the CHAMPION keyword have one or more champion models. If there is a number after the CHAMPION keyword, that number indicates the proportion of models in that unit that can be champions. In any other case, 1 model in the unit can be a champion. Units with the CHAMPION keyword have the following passive ability:

Passive
CHAMPION: A veteran fighter leads the charge.

Effect: Add 1 to the Attacks characteristic of weapons used by champions in this unit. If this unit is a BEAST, this ability affects this unit’s Companion weapons.

Errata

Champion
Change the definition of Champion to:
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’

The CHAMPION keyword is used in the following Blades of Khorne warscrolls:

Beast
Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
• Garrek’s Reavers
• Gorechosen of Dromm
• Kamandora’s Blades
• Magore’s Fiends
Passive
SEED OF REBIRTH: Should the bearer of this seed ever fall, its rejuvenating energies will grant them new life.

Effect: The first time this unit would be destroyed, before removing it from play, roll a dice. On a 3+, this unit is not destroyed and any remaining damage points inflicted on it have no effect. Then, Heal (D3) this unit.
21.0 Healing
Some abilities allow you to heal a unit. To heal a unit, remove a number of damage points from the unit equal to the number in brackets after ‘Heal’, e.g. Heal (2).

FAQ

Q:If an ability (e.g. ‘Seed of Rebirth’) would allow a unit that would be destroyed to negate all remaining damage points then heal to prevent that unit from being destroyed, and another ability (e.g. ‘Quenching the Flames’) prevents that unit from healing, would that unit still be destroyed?
A:
Yes.
Any Hero Phase
1
RALLY: With an inspiring call to action, wounded soldiers get a second wind and fresh troops take the field to replace their fallen comrades.

Declare: Pick a friendly unit that is not in combat to use this ability.

Effect: Make 6 rally rolls of D6. For each 4+, you receive 1 rally point. Rally points can be spent in the following ways:
  • For each rally point spent, Heal (1) that unit.
  • You can spend a number of rally points equal to the Health characteristic of that unit to return a slain model to that unit.
You can spend the rally points in any combination of the above. Unspent rally points are then lost.
2.0 Musicians
Units with the MUSICIAN keyword have one or more musician models. The number after the MUSICIAN keyword indicates the proportion of models in that unit that can be musicians. Units with the MUSICIAN keyword have the following passive ability:

Passive
MUSICIAN: The beat of a drum or the blast of a horn drives the soldiers ever onward.

Effect: While this unit contains any musicians, if it uses the ‘Rally’ command, you can make one additional rally roll of D6.

The MUSICIAN keyword is used in the following Blades of Khorne warscrolls:

Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry
32.2 Objective Control
In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:
  1. Starting with the active player, each player determines the control score of each of their units that is contesting that objective. A unit’s control score is the combined Control characteristics of all the models in that unit that are contesting the objective. Some abilities modify a unit’s control score, but it cannot be reduced to less than 1.
  2. Each player adds up the control scores of all of their units contesting that objective. This is their army control score for that objective.
  3. The players compare their army control scores for that objective. If one player’s score is higher, that player gains control of that objective. Once a player gains control of an objective, it remains under their control until their opponent gains control of it.

Sometimes objective markers get accidentally nudged while you are moving models around. This is perfectly fine - just remember to put them back in their proper positions when determining objective control.

Errata

32.2 Objective Control
Change the first sentence to:
‘In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:’
3.0 Standard Bearers
Units with the STANDARD BEARER keyword have one or more standard bearer models. The number after the STANDARD BEARER keyword indicates the proportion of models in that unit that can be standard bearers. Units with the STANDARD BEARER keyword have the following passive ability:

Passive
STANDARD BEARER: The unit’s standard provides a rallying point in the chaos of battle.

Effect: While this unit contains any standard bearers, add 1 to this unit’s control score.

The STANDARD BEARER keyword is used in the following Blades of Khorne warscrolls:

Cavalry
• Scourge of Ghyran Bloodcrushers
Infantry

The CAVALRY keyword is used in the following Blades of Khorne warscrolls:

Cavalry Hero
• Lord of Khorne on Juggernaut
• Skullmaster, Herald of Khorne
Cavalry
• Scourge of Ghyran Bloodcrushers
Anti-X (+1 Rend)
Add 1 to this weapon’s Rend characteristic if the target has the keyword after ‘Anti-’ or fulfils the condition after ‘Anti-’. Multiples of this ability are cumulative. For example, if a weapon has both Anti-charge (+1 Rend) and Anti-HERO (+1 Rend), then add 2 to the Rend characteristic of the weapon for attacks that target a HERO that charged in the same turn.
Charge (+1 Damage)
Add 1 to this weapon’s Damage characteristic if the attacking unit charged this turn.
© Vyacheslav Maltsev 2013-2026