Blades of Khorne – Godmarked Ascendant
•REGIMENT OF RENOWN•
Godmarked Ascendant
Those rare few that achieve apotheosis stand upon the apex of the Path to Glory as Daemon Princes, each seeking to engrave their names upon the annals of history. Alongside worshippers and daemons of their chosen patron, they will wreak paths of catastrophic violence across the realms to further their legend. Those accompanying these Daemon Princes are branded with a mark of favour from their god. | ||
•REGIMENT OF RENOWN•
Godmarked Ascendant
INCLUSION This Regiment of Renown can be included in armies from the following factions: ORGANISATION | ||
 Passive |
GODMARKED LEGION: The mightiest of warriors in the godmarked legions of Chaos can be elevated to daemonhood should their patron deem them worthy.
Effect: The unit in this Regiment of Renown gains the ‘Gifts of Chaos’ ability and one of the following faction keywords that matches your army’s faction:
| Passive |
GIFTS OF CHAOS: This daemon takes to the field redolent with god-given gifts.
Effect:
- If this unit has the BLADES OF KHORNE keyword, add 1 to the Attacks characteristic of its Hellforged Weapons and its Hellforged Weapons have the Blood-Hungry weapon ability.
- If this unit has the DISCIPLES OF TZEENTCH keyword, it has WIZARD (1).
- If this unit has the MAGGOTKIN OF NURGLE keyword, it has WARD (5+).
- If this unit has the HEDONITES OF SLAANESH keyword, add 1 run rolls and charge rolls for it.
FAQ
| Q: | Can a Daemon Prince from the Godmarked Ascendant Regiment of Renown be given enhancements? |
| A: | Yes. In Army Composition 3.5 it states that a unit cannot use faction rules (including enhancements) unless they have a keyword that matches up with the faction’s name. Since the Godmarked Ascendant Regiment of Renown adds such a keyword, that unit is eligible to be given enhancements. |
Errata
Regiment of Renown, Godmarked Ascendant
Change the first bullet point of ‘Gifts of Chaos’ to:
‘If this unit has the BLADES OF KHORNE keyword, add 1 to the Attacks characteristic of its Hellforged Weapons and its Hellforged Weapons have the Blood-Hungry weapon ability.’
‘If this unit has the BLADES OF KHORNE keyword, add 1 to the Attacks characteristic of its Hellforged Weapons and its Hellforged Weapons have the Blood-Hungry weapon ability.’
3.5 Regiments of Renown
In addition to creating your own regiments, you can also spend points to include 1 Regiment of Renown. Regiments of Renown are pre-built regiments, each with their own special abilities. The rules for each Regiment of Renown will specify which factions can include it. A unit in a Regiment of Renown cannot be your general even if it is a WARMASTER.- You cannot include more than one Regiment of Renown in your army unless otherwise specified in the notes column of that regiment’s battle profile.
- Units in a Regiment of Renown cannot use (but can be picked as the target of, if otherwise eligible) any faction rules from the faction they are allied into, including enhancements and lores, unless they have a keyword that matches that faction’s name.
- If an ability allows you to set up a replacement unit (Core Rules, 24.2) for a unit in a Regiment of Renown, that unit also counts as being part of that Regiment of Renown.
| Once Per Turn (Army), Start of Any Turn |
SKULLS FOR THE SKULL THRONE: ...only that it flows.
Effect: Pick a BLOOD TITHE ability that you have not unlocked and spend the number of blood tithe points required to unlock that ability (shown in the top-right corner of the ability). That BLOOD TITHE ability is now unlocked for the rest of the battle.
 Your Charge Phase |
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.
Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
| KEYWORDS | CORE, MOVE, CHARGE |
Hit Roll
Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.| Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities). | ||
Cover
Subtract 1 from hit rolls for attacks that target a unit that is behind or wholly on this terrain feature, unless that unit charged this turn or has the FLY keyword.17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
| Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
| Passive |
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.
Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
Obscuring
While every model in a non-MONSTER non‐WAR MACHINE unit that does not have the FLY keyword is within 1" of this terrain feature, the following apply:- That unit is only visible to enemy units that are within its combat range.
- The Range characteristic of that unit’s ranged weapons is halved (rounding down to the nearest inch).
Unstable
Models can move across but cannot be set up on or end any type of move on any part of this terrain feature that is more than 1" tall.1.4.2 Obscuring Terrain
Examples: Wyldwood, fortress wallTerrain Abilities: Cover, Obscuring, Unstable
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
| ||
| In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes. | ||
FAQ / Errata
FAQ
| Q: | If a non-FLY INFANTRY HERO (e.g. a Scinari Cathallar) is a Shrine Guardian of a Shrine Luminor, and that Shrine Guardian is within 1" of an obscuring terrain feature, is the Shrine Guardian visible to enemy abilities that target the Shrine Guardian? |
| A: | Yes. |
Errata
6.0 Visibility
Add the following:
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
Universal Core Abilities - Charge Phase
| Your Charge Phase |
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.
Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
| KEYWORDS | CORE, MOVE, CHARGE |
14.3 Charge Phase
| Your Charge Phase |
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.
Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
| KEYWORDS | CORE, MOVE, CHARGE |
FAQ
| Q: | When using the ‘Charge’ ability, does my unit need to end the charge move within 1⁄2" of an enemy unit that was visible to the charging unit at the start of that charge move? |
| A: | No. It must end the charge move within 1⁄2" of an enemy unit that is visible to the charging unit when it finishes that charge move. |
| Q: | If an ability adds to or subtracts from the number of dice that make up a charge roll, is that a modifier to the charge roll? |
| A: | No. |
18.4 Destroyed Units
When the last model in a unit is slain, the unit is destroyed and all remaining damage points inflicted on that unit have no effect. Similarly, if something causes a unit to be destroyed, all models in the unit are slain and removed from play.
Shooting attacks
Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).16.0 Picking Targets
When declaring an ATTACK ability for a unit, you must pick the target unit(s) for its attacks. The number of attacks each model can make is equal to the Attacks characteristic of the weapons it is using. In most cases, models attack with every weapon on their warscroll (melee weapons for combat attacks, ranged weapons for shooting attacks), though some warscrolls specify that certain models in the unit are armed with special weapons or that the unit must pick between multiple weapons when it attacks.If the unit is in combat, it can only target units that are in combat with it. If a model has more than one attack, you can split the attacks between eligible targets as you wish.
- Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.
- Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).
FAQ
| Q: | When making shooting attacks, can all models in the attacking unit shoot even if the target unit is not visible to some of those models? |
| A: | No, the only models in the attacking unit that can make shooting attacks are those that the target unit is visible to. |
| Q: | When a unit uses a SHOOT ability, does it have to shoot with all of the ranged weapons that it is armed with? |
| A: | Yes. |
 Your Shooting Phase |
SHOOT: The warriors take aim and unleash a deadly volley.
Declare: Pick a friendly unit that has not used a RUN or RETREAT ability this turn to use this ability. Then, pick one or more enemy units as the target(s) of that unit’s attacks (see 16.0).
Effect: Resolve shooting attacks against the target unit(s).
Effect: Resolve shooting attacks against the target unit(s).
| KEYWORDS | CORE, ATTACK, SHOOT |
Combat attacks
Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with. Any Combat Phase |
FIGHT: Locked in a deadly melee, the fighters strike out at their foes.
Declare: Pick a friendly unit that is in combat or that charged this turn to use this ability. That unit can make a pile-in move. Then, if that unit is in combat, you must pick one or more enemy units as the target(s) of that unit’s attacks.
Effect: Resolve combat attacks against the target unit(s).
Effect: Resolve combat attacks against the target unit(s).
| KEYWORDS | CORE, ATTACK, FIGHT |
1.0 Wizards and Priests
WIZARDS are special units that can cast spells, and PRIESTS are special units that can chant prayers. Spells and prayers are powerful abilities that can have a dramatic impact on the battle.
Banish Manifestation
| Your Hero Phase |
BANISH MANIFESTATION: The wizard or priest disrupts the arcane forces sustaining a manifestation, wiping it from existence.
Declare: Pick a friendly WIZARD or PRIEST to use this ability, pick a MANIFESTATION within 30" of them that was not summoned this turn to be the target, then make a banishment roll of 2D6. Add 1 to the banishment roll for each additional enemy MANIFESTATION on the battlefield after the first. You cannot pick the same MANIFESTATION to be the target of this ability more than once per turn.
Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
| KEYWORDS | BANISH |
Save Roll
The commander of the target unit rolls a dice, subtracting the attacking weapon’s Rend characteristic from the roll. Unmodified save rolls of 1 always fail. If the roll equals or exceeds the Save characteristic of the target unit, the attack fails and the attack sequence ends. If not, it is a successful attack: move on to the next step.The BLOODBOUND keyword is used in the following Blades of Khorne warscrolls:
Beast Hero
Cavalry Hero
Infantry Hero
Cavalry
Infantry
Monster
The non-MONSTER DAEMON keyword is used in the following Blades of Khorne warscrolls:
The MONSTER keyword is used in the following Blades of Khorne warscrolls:
Monster Hero
Monster
Shoot in Combat
This weapon can be used to make shooting attacks even if the attacking unit is in combat.7.0 Manifestations
There are two types of manifestation: endless spells, which can be summoned by WIZARDS, and invocations, which can be summoned by PRIESTS. Each manifestation has its own warscroll, and the spell or prayer that allows that manifestation to be summoned will be found in the appropriate manifestation lore. No more than 1 friendly WIZARD or PRIEST can attempt to summon the same manifestation per turn, and a friendly WIZARD or PRIEST cannot attempt to summon a friendly manifestation that was removed from play in the same turn. Manifestations are not units but can be interacted with in similar ways, as explained next:
|
|
|
7.2 Banishing Manifestations
Instead of using a SPELL or PRAYER ability (including when using the ‘Magical Intervention’ ability), each WIZARD and PRIEST can use the ‘Banish Manifestation’ ability:| Your Hero Phase |
BANISH MANIFESTATION: The wizard or priest disrupts the arcane forces sustaining a manifestation, wiping it from existence.
Declare: Pick a friendly WIZARD or PRIEST to use this ability, pick a MANIFESTATION within 30" of them that was not summoned this turn to be the target, then make a banishment roll of 2D6. Add 1 to the banishment roll for each additional enemy MANIFESTATION on the battlefield after the first. You cannot pick the same MANIFESTATION to be the target of this ability more than once per turn.
Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.
| KEYWORDS | BANISH |
Companion
Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).Blood Tithe Abilities
| Once Per Turn (Army), Reaction: You declared a CHARGE ability | 0 |
MURDERLUST: When worthy opponents are near, the impulse to kill becomes all-consuming.
You do not need to unlock this ability to use it. It is already unlocked.
Effect: Roll a dice. You can replace one of the dice in the charge roll with that value. If you do so, inflict D3 mortal damage on the unit using that CHARGE ability after that ability is resolved.
Effect: Roll a dice. You can replace one of the dice in the charge roll with that value. If you do so, inflict D3 mortal damage on the unit using that CHARGE ability after that ability is resolved.
| KEYWORDS | BLOOD TITHE |
| Once per Turn, Start of Any Turn | 1 |
DIVINE SCORN: The battlefield is Khorne's temple, and Khorne's alone.
Declare: Pick up to 3 enemy WIZARDS or PRIESTS within 6" of any friendly BLADES OF KHORNE units to be the target(s).
Effect: Roll a dice for each target. On a 3+, subtract 1 from the target’s power level, to a minimum of 0, until the start of the next turn.
Effect: Roll a dice for each target. On a 3+, subtract 1 from the target’s power level, to a minimum of 0, until the start of the next turn.
| KEYWORDS | BLOOD TITHE |
| Once Per Turn (Army), Your Combat Phase | 1 |
PUNISH THE PACIFIST: To shirk from combat is to sin against the War God.
Declare: Each unit (friendly and enemy) and enemy MANIFESTATION that is not in combat is a target.
Effect: Roll a dice. On a 1-2, inflict 1 mortal damage on each target. On a 3+, inflict 1 mortal damage on each enemy target.
Effect: Roll a dice. On a 1-2, inflict 1 mortal damage on each target. On a 3+, inflict 1 mortal damage on each enemy target.
| KEYWORDS | BLOOD TITHE |
| Once Per Turn (Army), Your Hero Phase | 2 |
MURDER THE MYSTIC: Those who cower behind conjured spellcraft will be punished severely.
You can only unlock this ability if you have unlocked ‘Divine Scorn’.
Declare: Pick up to 4 enemy MANIFESTATIONS to be the target(s).
Effect: Make a banishment roll of 2D6 for each target. If the banishment roll equals or exceeds the banishment value listed on that MANIFESTATION’s warscroll, inflict D3 mortal damage on each enemy unit within 3" of it and then it is banished and removed from play.
Declare: Pick up to 4 enemy MANIFESTATIONS to be the target(s).
Effect: Make a banishment roll of 2D6 for each target. If the banishment roll equals or exceeds the banishment value listed on that MANIFESTATION’s warscroll, inflict D3 mortal damage on each enemy unit within 3" of it and then it is banished and removed from play.
| KEYWORDS | BLOOD TITHE |
 Passive | 2 |
GLORIOUS COMBAT OR NAUGHT: The air boils, charring arrows and melting musket shot.
You can only unlock this ability if you have unlocked ‘Divine Scorn’ or ‘Punish the Pacifist’.
Effect: Subtract 1 from hit rolls for shooting attacks that target friendly BLADES OF KHORNE units.
Effect: Subtract 1 from hit rolls for shooting attacks that target friendly BLADES OF KHORNE units.
| KEYWORDS | BLOOD TITHE |
| Passive | 3 |
REVEL IN BATTLE: No tricks - no deceptions.
You can only unlock this ability if you have unlocked ‘Punish the Pacifist’.
Effect: Other than the Companion weapon ability, weapon abilities for combat attacks made by enemy units that charged this turn and that target a friendly BLADES OF KHORNE unit have no effect.
Effect: Other than the Companion weapon ability, weapon abilities for combat attacks made by enemy units that charged this turn and that target a friendly BLADES OF KHORNE unit have no effect.
| KEYWORDS | BLOOD TITHE |
| Passive | 4 |
SLAUGHTER TRIUMPHANT: Khorne's fury floods the field, burning out all thought but to slay.
You can only unlock this ability if you have unlocked ‘Murder the Mystic’ or ‘Glorious Combat or Naught’.
Effect: Add 1 to the Attacks characteristic of weapons used by friendly BLADES OF KHORNE units that charged in the same turn.
Effect: Add 1 to the Attacks characteristic of weapons used by friendly BLADES OF KHORNE units that charged in the same turn.
| KEYWORDS | BLOOD TITHE |
| Passive | 4 |
CLEAVE WIDE THE GRIN OF KHORNE: Gore begets gore, and death begets death.
You can only unlock this ability if you have already unlocked ‘Revel in Battle’ or ‘Glorious Combat or Naught’.
Effect: Add 1 to hit rolls for combat attacks made by friendly BLADES OF KHORNE units.
Effect: Add 1 to hit rolls for combat attacks made by friendly BLADES OF KHORNE units.
| KEYWORDS | BLOOD TITHE |
Crit (Mortal)
If an attack made with this weapon scores a critical hit, that attack inflicts mortal damage on the target unit equal to the Damage characteristic of that weapon and the attack sequence ends.18.1 Ward Saves
Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect.| Passive |
WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.
Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.
1.1 Power Level
Each WIZARD and PRIEST has a power level shown after the keyword, e.g. WIZARD (2). A WIZARD’s casting power level determines how many Spell abilities they can use per phase. A PRIEST’s chanting power level determines how many PRAYER abilities they can use per phase.
Battle Traits
| Once Per Turn, Reaction: You declared the ‘Skulls for the Skull Throne’ ability |
BLOOD-DRENCHED: As blood gushes down blades, armour and teeth, the fervent warriors of the Blood God are driven into a divine frenzy.
Effect: After that ability has been resolved, if you unlocked a BLOOD TITHE ability this turn, pick a friendly BLADES OF KHORNE unit to be the target. The following effects apply to the target for the rest of the battle:
Wild-eyed Brutality: Ignore positive modifiers to save rolls for the target.
Blood Haze: If the target is BLOODBOUND, its Blood-hungry weapons have Crit (Mortal).
Weapons of Murder: If the target is a non-MONSTER DAEMON unit, add 1 to the Rend characteristic of its Blood-hungry weapons, including Blood-hungry Companion weapons.
Bloodlords Supreme: If the target is a MONSTER, add 1 to the Damage characteristic of its Blood-hungry weapons.
Wild-eyed Brutality: Ignore positive modifiers to save rolls for the target.
Blood Haze: If the target is BLOODBOUND, its Blood-hungry weapons have Crit (Mortal).
Weapons of Murder: If the target is a non-MONSTER DAEMON unit, add 1 to the Rend characteristic of its Blood-hungry weapons, including Blood-hungry Companion weapons.
Bloodlords Supreme: If the target is a MONSTER, add 1 to the Damage characteristic of its Blood-hungry weapons.
Errata
Battle Traits
Change the timing of the ‘Blood-drenched’ ability to:
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
Universal Core Abilities - Movement Phase
| Your Movement Phase |
NORMAL MOVE: The warriors advance across the battlefield.
Declare: Pick a friendly unit that is not in combat to use this ability.
Effect: That unit can move a distance up to its Move characteristic. That unit cannot move into combat during any part of that move.
Effect: That unit can move a distance up to its Move characteristic. That unit cannot move into combat during any part of that move.
| KEYWORDS | CORE, MOVE |
| Your Movement Phase |
RUN: The unit rushes into position.
Declare: Pick a friendly unit that is not in combat to use this ability.
Effect: Make a run roll of D6. That unit can move a distance up to its Move characteristic added to the run roll. That unit cannot move into combat during any part of that move.
Effect: Make a run roll of D6. That unit can move a distance up to its Move characteristic added to the run roll. That unit cannot move into combat during any part of that move.
| KEYWORDS | CORE, MOVE, RUN |
| Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
