T’au Empire – Kroot Farstalkers
 ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
Kroot Farstalkers
M
7"
T
3
Sv
6+
W
1
Ld
7+
OC
1
FARSTALKERS & KILL-BROKER(⌀28mm)
12"
3
6+
1
7+
0
KROOT HOUNDS(⌀25mm)
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Dvorgite skinner [ignores cover, torrent]
Dvorgite skinner [ignores cover, torrent]
12"
D6
N/A
4
-1
1
Farstalker firearm [rapid fire 1]
Farstalker firearm [rapid fire 1]
24"
1
4+
4
0
1
Kroot pistol [pistol]
Kroot pistol [pistol]
12"
1
4+
4
0
1
Londaxi tribalest [anti-vehicle 4+, devastating wounds, heavy]
Londaxi tribalest [anti-vehicle 4+, devastating wounds, heavy]
18"
3
5+
7
-1
1
T’au-tech rifle [rapid fire 1]
T’au-tech rifle [rapid fire 1]
30"
1
4+
5
0
1
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Close combat weapon
Close combat weapon
Melee
2
3+
4
0
1
Ripping fangs
Ripping fangs
Melee
3
3+
3
0
1
Ritual blade
Ritual blade
Melee
3
3+
5
0
1
WARGEAR OPTIONS
  • The Kroot Kill-broker’s Farstalker firearm can be replaced with 1 T’au-tech rifle.
  • 1 Kroot Farstalker’s Farstalker firearm can be replaced with one of the following:
    • 1 Dvorgite skinner
    • 1 Londaxi tribalest
  • 1 Kroot Farstalker equipped with a Farstalker firearm can be equipped with 1 Pech’ra.

ABILITIES
CORE: Infiltrators, Stealth
Bounty Hunters: At the start of the battle, select one unit from your opponent’s army. Each time a model in this unit makes an attack that targets that unit, that attack has the [LETHAL HITS] and [PRECISION] abilities.
WARGEAR ABILITIES
Pech’ra: Ranged weapons equipped by the bearer’s unit have the [IGNORES COVER] ability.
UNIT COMPOSITION
  • 1 Kroot Kill-broker
  • 9 Kroot Farstalkers
  • 2 Kroot Hounds
The Kroot Kill-broker is equipped with: Farstalker firearm; Kroot pistol; ritual blade.

Every Kroot Farstalker is equipped with: Farstalker firearm; Kroot pistol; close combat weapon.

Every Kroot Hound is equipped with: ripping fangs.
12 models
85
KEYWORDS: INFANTRY, KROOT, GRENADES, FARSTALKERS
FACTION KEYWORDS:
STRATAGEMS
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GRENADE
1CP
Core – Wargear
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
2CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
A TEMPTING TRAP
1CP
Kauyon – Battle Tactic
COORDINATE TO ENGAGE
1CP
Kauyon – Battle Tactic
POINT-BLANK AMBUSH
1CP
Kauyon – Battle Tactic
COMBAT EMBARKATION
1CP
Kauyon – Wargear
PHOTON GRENADES
1CP
Kauyon – Wargear
JOIN THE HUNT
2CP
Kroot Hunting Pack – Battle Tactic
GUERRILLA WARRIORS
1CP
Kroot Hunting Pack – Strategic Ploy
A TRAP WELL LAID
1CP
Kroot Hunting Pack – Battle Tactic
EMP GRENADES
1CP
Kroot Hunting Pack – Wargear
HIDDEN HUNTERS
1CP
Kroot Hunting Pack – Strategic Ploy
THE GRISLY FEAST
1CP
Kroot Hunting Pack – Strategic Ploy
AGGRESSIVE MOBILITY
1CP
Mont’ka – Battle Tactic
FOCUSED FIRE
1CP
Mont’ka – Battle Tactic
COUNTERFIRE DEFENCE SYSTEMS
2CP
Mont’ka – Wargear
LED BY
This unit can be led by the following units:
DETACHMENT ABILITY
Patient Hunter
Killing Blow
Hunter’s Instincts
Skirmish Fighters
DEEP STRIKE

Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.

During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models.

  • Unit can be set up in Reserves instead of on the battlefield.
  • Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.

The MARKERLIGHT keyword is used in the following T’au Empire datasheets:

For the Greater Good

The Hunter Cadres battle for the betterment of the T’au Empire, not for personal gain or egotistic accomplishments. This burning commitment allows for prodigiously effective covering fire. Enemies are pinned in place by deadly bursts of pulse blasts, or the infamous T’au markerlight is used to expose even well-fortified enemy positions, allowing other T’au warriors to fall on the vulnerable enemies with murderous force.

If your Army Faction is , then in your Shooting phase units from your army can work in pairs to help each other target specific enemy units. When they do this, one unit is the Observer unit and the other is their Guided unit. The enemy they are targeting is called their Spotted unit.

Each time you select this unit to shoot, if it is not an Observer unit, it can use this ability. If it does, select one other friendly unit with this ability that is also eligible to shoot (excluding FORTIFICATION, Battle-shocked and Observer units). Until the end of the phase, this unit is considered a Guided unit, and that friendly unit is considered an Observer unit. Then select one enemy unit that is visible to both your units to be their Spotted unit.

Until the end of the phase:
  • Each time a model in a Guided unit makes an attack that targets their Spotted unit, improve the Ballistic Skill characteristic of the attack by 1 and, if their Observer unit has the MARKERLIGHT keyword, the attack has the [IGNORES COVER] ability.
  • Each time a model in a Guided unit makes an attack that does not target their Spotted unit, worsen the Ballistic Skill characteristic of the attack by 1.
Invulnerable Saves

Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.

Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.

Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.

  • Invulnerable Save: Never modified by an attack’s AP.
  • The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.

  • Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
  • Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
  • Critical Hit: Unmodified Hit roll of 6. Always successful.
  • An unmodified Hit roll of 1 always fails.
  • A Hit roll can never be modified by more than -1 or +1.
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.

WOUND ROLL
ATTACK’S STRENGTH VS TARGET’S TOUGHNESSD6 RESULT REQUIRED
Strength is TWICE (or more than twice) the Toughness.
+
Strength is GREATER than the Toughness.
+
Strength is EQUAL to the Toughness.
+
Strength is LESS than the Toughness.
+
Strength is HALF (or less than half) the Toughness.
+

If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.

  • Critical Wound: Unmodified Wound roll of 6. Always successful.
  • An unmodified Wound roll of 1 always fails.
  • A Wound roll can never be modified by more than -1 or +1.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Anti

Certain weapons are the bane of a particular foe.

Weapons with [ANTI-KEYWORD X+] in their profile are known as Anti weapons. Each time an attack is made with such a weapon against a target with the keyword after the word ‘Anti-’, an unmodified Wound roll of ‘x+’ scores a Critical Wound.

Example: An attack made with an [ANTI-VEHICLE 4+] weapon will score a Critical Wound against – and so successfully wound – a VEHICLE unit on an unmodified Wound roll of 4+, while an attack made with an [ANTI-PSYKER 2+] weapon will score a Critical Wound against – and so successfully wound – a PSYKER unit on an unmodified Wound roll of 2+.

  • [ANTI-KEYWORD X+]: An unmodified Wound roll of ‘x+’ against a target with the matching keyword scores a Critical Wound.
Devastating Wounds

Some weapons can inflict strikes of such power that they make a mockery of armour

Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved.

  • Saving throws cannot be made against Critical Wounds scored by this weapon (including invulnerable saving throws).
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.

  • Advance Move: Models move up to M+D6".
  • Cannot move within Engagement Range of any enemy models.
  • Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.

You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
  • Within Engagement Range of every unit that you selected as a target of the charge.
  • Without moving within Engagement Range of any enemy units that were not a target of the charge.
  • In Unit Coherency.
If any of these conditions cannot be met, the charge fails and no models in the charging unit move this phase. Otherwise, the charge is successful and the models in the charging unit make a Charge move – move each model a distance in inches up to the result of the Charge roll. When doing so, each model in the charging unit must end its Charge move closer to one of the units selected as a target of its charge. If you can also move a charging model so that it ends its Charge move in base-to-base contact with one or more enemy models while still enabling the charging unit to end its move satisfying all of the conditions above, you must do so. The controlling player chooses the order in which to move their models.

  • Charge Roll: 2D6".
  • Targets of a charge must be within 12" but do not need to be visible.
  • If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
  • Cannot move within Engagement Range of any unit that was not a target of the charge.
  • If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.

A unit cannot shoot or declare a charge in the same turn that it Fell Back.

Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.

Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.

  • Fall Back Move: Models move up to M".
  • Units that Fall Back cannot shoot or declare a charge in the same turn.
  • Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
  • If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
  • Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
Hazardous

Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.

Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, if one or more models attack with Hazardous weapons, then after that unit has resolved all of its attacks, you must take one Hazardous test for each Hazardous weapon that was just used by rolling one D6. For each roll of 1, that test is failed and one model in that unit equipped with a Hazardous weapon is destroyed (selected by the controlling player), unless that model is a CHARACTER, MONSTER or VEHICLE, in which case it suffers 3 mortal wounds instead. Note that if you selected a CHARACTER model in an Attached unit, the mortal wounds suffered must be allocated to that model first, even if there is another model in that unit that has lost one or more wounds or has had attacks allocated to it this phase.

Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and as no models in the unit are CHARACTERS, MONSTERS or VEHICLES, one of those models is destroyed.

  • After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, one model equipped with a Hazardous weapon is destroyed (CHARACTERS, MONSTERS and VEHICLES suffer 3 mortal wounds instead).
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.

If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.

An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.

  • Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
  • An unmodified saving throw of 1 always fails.
  • A saving throw can never be improved by more than +1.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.

You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.

  • Unmodified Dice: the result after re-rolls, but before any modifiers.
  • A dice can never be re-rolled more than once.
  • You must re-roll all dice if several need adding together (e.g. 2D6).
  • Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit.

TARGET: That unit from your army.

EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.

While a unit is Battle-shocked:

Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.

  • Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
  • Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
  • Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
  • Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.

TARGET: A unit from your army that must take a Battle-shock test.

EFFECT: Your unit automatically passes that Battle-shock test.

RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.

FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance, Fall Back or Charge move.

TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.

EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.

RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.

TARGET: One unit from your army that is in Reserves.

EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).

RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.

Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.

  • Engagement Range: Within 1" horizontally and 5" vertically.
  • Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
Mortal Wounds

Some attacks are so powerful that no armour or force field can withstand their fury.

Some attacks inflict mortal wounds. Each mortal wound inflicts one point of damage on the target unit, and they are always applied one at a time. Do not make a Wound roll or saving throw (including invulnerable saving throws) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit as described below.

Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.

  • Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
Charge Bonus

Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.

Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.
HEROIC INTERVENTION
2CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.

TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.

EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.

RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Attached Units
Some CHARACTER units have the Leader ability, which lets them merge with other units (known as Bodyguard units) to form an Attached unit.

The Starting Strength of an Attached unit is equal to the combined Starting Strengths of all of its units (i.e. the number of models in the Leader unit added to the number of models in the Bodyguard unit). If either the Leader unit or the Bodyguard unit in an Attached unit is destroyed, the Starting Strength of the remaining unit is changed to be equal to its original Starting Strength.

Example: A Primaris Captain (Starting Strength 1) is attached to a unit of Intercessors (Starting Strength 5). This Attached unit has a Starting Strength of 6. If all the Intercessors are destroyed, the remaining Primaris Captain would revert to having a Starting Strength of 1.

For the purposes of rules that are triggered when a unit is destroyed, such rules are still triggered when one of the individual units that made up an Attached unit is destroyed (the Leader or the Bodyguard unit).

Example: If a rule awards you with 1VP each time an enemy unit is destroyed, and you target an Attached unit, you would gain 1VP if the Bodyguard unit is destroyed and 1VP if the Leader unit is destroyed (for a total of 2VP).
Precision

Precision attacks can pick high-value targets out in a crowd, whether through the unerring aim of a sniper or the pinpoint accuracy of a blade-master’s strike.

Weapons with [PRECISION] in their profile are known as Precision weapons. Each time an attack made with such a weapon successfully wounds an Attached unit (see Leader ability), if a CHARACTER model in that unit is visible to the attacking model, the attacking model’s player can choose to have that attack allocated to that CHARACTER model instead of following the normal attack sequence.

  • When targeting an Attached unit, the attacking model’s player can have the attack allocated to a CHARACTER model in that unit visible to the bearer.
Objective Markers
Objective markers represent objects of tactical or strategic import that both sides are attempting to secure, such as valuable artefacts, vital supplies or communications nodes. If a mission uses objective markers, it will state where they are located on the battlefield. These can be represented using any suitable marker, but we recommend using round markers that are 40mm in diameter.

When setting objective markers up on the battlefield, place them so they are centred on the point specified by the mission. When measuring distances to and from objective markers, measure to and from the closest part of them. Models can move over objective markers as if they were not there, but they cannot end a move on top of an objective marker.

At the start of the battle, each objective marker on the battlefield is said to be contested, and so is not controlled by either player. To control an objective marker, a player will first need to move models within range of it. A model is within range of an objective marker if it is within 3" horizontally and 5" vertically of that objective marker.

Every model has an Objective Control (OC) characteristic listed on its datasheet. To determine a player’s Level of Control over an objective marker, add together the OC characteristics of all the models from that player’s army that are within range of that objective marker. A player will control an objective marker at the end of any phase or turn if their Level of Control over it is greater than their opponent’s. If both players have the same Level of Control over an objective marker, that objective marker is contested.

  • A model is within range of an objective marker if within 3" horizontally and 5" vertically.
  • Level of Control: Add together the OC characteristics of all of a player’s models within range of the objective marker.
  • An objective marker is controlled by the player with the highest Level of Control over it (in a tie, it is contested).
  • Models cannot end a move on top of an objective marker.
A TEMPTING TRAP
1CP
Kauyon – Battle Tactic Stratagem
Kauyon teaches that many things can be used to bait a trap, luring the foe into position.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase. The first time you use this Stratagem, you must also select one objective marker that is not in your opponent’s deployment zone; until the end of the battle, this becomes your Trap objective marker.

EFFECT: Until the end of the phase, each time a model in your unit makes a ranged attack that targets an enemy unit within range of your Trap objective marker, add 1 to the Wound roll.

RESTRICTIONS: You cannot use this Stratagem during the first or second battle rounds.
Ignores Cover

Some weapons are designed to root enemy formations out of entrenched positions.

Weapons with [IGNORES COVER] in their profile are known as Ignores Cover weapons. Each time an attack is made with such a weapon, the target cannot have the Benefit of Cover against that attack.
COORDINATE TO ENGAGE
1CP
Kauyon – Battle Tactic Stratagem
T’au Hunter Cadres work in close coordination to destroy the most dangerous enemy targets.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has just been selected as an Observer unit (see For the Greater Good).

EFFECT: Until the end of the phase, each time a model in your unit makes an attack that targets their Spotted unit, improve the Ballistic Skill characteristic of that attack by 1 and, if your unit has the MARKERLIGHT keyword, that attack has the [IGNORES COVER] ability.
POINT-BLANK AMBUSH
1CP
Kauyon – Battle Tactic Stratagem
Devastating firepower need not be applied from afar, especially when striking an unsuspecting foe.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes a ranged attack that targets an enemy unit within 9", improve the Armour Penetration characteristic of that attack by 1.

RESTRICTIONS: You cannot use this Stratagem during the first or second battle rounds.
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
AGGRESSIVE MOBILITY
1CP
Mont’ka – Battle Tactic Stratagem
By advancing swiftly into commanding positions, Mont’ka forces maximise the benefits of their enemies' shock and disorientation.
WHEN: Your Movement phase.

TARGET: One unit from your army that has not been selected to move this phase.

EFFECT: Until the end of the phase, if your unit Advances, do not make an Advance roll for it. Instead, until the end of the phase, add 6" to the Move characteristic of models in your unit.
FOCUSED FIRE
1CP
Mont’ka – Battle Tactic Stratagem
Mont’ka doctrine heavily emphasises the massed concentration of fire upon a single target at a time, obliterating each component of the enemy force in succession with a series of unrelenting barrages.
WHEN: Start of your Shooting phase.

TARGET: Two units from your army that have not been selected to shoot this phase, and one enemy unit.

EFFECT: Until the end of the phase, each time a model in either of your units makes an attack, it can only target that enemy unit (and only if it is an eligible target for that attack), and when resolving that attack, improve the Armour Penetration characteristic by 1.

RESTRICTIONS: You cannot use this Stratagem during the fourth or fifth battle rounds.
COUNTERFIRE DEFENCE SYSTEMS
2CP
Mont’ka – Wargear Stratagem
Point-defence systems trigger as incoming fire is detected, blasting projectiles from the air and lessening the power of the enemy fusillade.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, each time an attack is allocated to your unit, subtract 1 from the Damage characteristic of that attack.
Patient Hunter
Kauyon Detachment

The tactical philosophy known as the Kauyon allows for T’au commanders to draw the enemy into a deadly trap, springing it at the perfect moment to deliver a storm of fatal strikes against which none can escape.

From the third battle round onwards, all ranged weapons equipped by models from your army have the [SUSTAINED HITS 1] ability, or the [SUSTAINED HITS 2] ability instead while targeting their unit’s Spotted unit.
Killing Blow
Mont’ka Detachment

Mont’ka is the most aggressive style of T’au warfare. Its singular focus is the art of identifying a target of opportunity and attacking it swiftly with an overwhelming application of force.

During the first, second and third battle rounds, ranged weapons equipped by models from your army have the [ASSAULT] ability. During the first, second and third battle rounds, while a unit is a Guided unit, its ranged weapons have the [LETHAL HITS] ability.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Torrent

Torrent weapons shoot clouds of fire, gas or other lethal substances that few foes can hope to evade.

Weapons with [TORRENT] in their profile are known as Torrent weapons. Each time an attack is made with such a weapon, that attack automatically hits the target.
Heavy

Heavy weapons are amongst the biggest guns on the battlefield, but require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.

Weapons with [HEAVY] in their profile are known as Heavy weapons. Each time an attack is made with such a weapon, if the attacking model’s unit Remained Stationary this turn, add 1 to that attack’s Hit roll.

  • Add 1 to Hit rolls if the bearer’s unit Remained Stationary this turn.
INFILTRATORS

Many armies employ reconnaissance units who can sit concealed, waiting for the right moment to strike.

During deployment, if every model in a unit has this ability, then when you set it up, it can be set up anywhere on the battlefield that is more than 9" horizontally away from the enemy deployment zone and all enemy models.
Rapid Fire

Rapid fire weapons are capable of long-ranged precision shots or controlled bursts at nearby targets.

Weapons with [RAPID FIRE X] in their profile are known as Rapid Fire weapons. Each time such a weapon targets a unit within half that weapon’s range, the Attacks characteristic of that weapon is increased by the amount denoted by ‘x’.

Example: A model targets a unit that is within half range of a weapon with an Attacks characteristic of 1 and the [RAPID FIRE 1] ability. That weapon therefore makes two attacks at the target, and you make two Hit rolls.

  • [RAPID FIRE X]: Increase the Attacks by ‘x’ when targeting units within half range.
STEALTH

Some warriors are masters of disguise and concealment.

If every model in a unit has this ability, then each time a ranged attack is made against it, subtract 1 from that attack’s Hit roll.
Lethal Hits

Some weapons can inflict fatal injuries on any foe, no matter their resilience.

Weapons with [LETHAL HITS] in their profile are known as Lethal Hits weapons. Each time an attack is made with such a weapon, a Critical Hit automatically wounds the target.
Pistol

Pistols can be wielded even at point-blank range.

Weapons with [PISTOL] in their profile are known as Pistols. If a unit contains any models equipped with Pistols, that unit is eligible to shoot in its controlling player’s Shooting phase even while it is within Engagement Range of one or more enemy units. When such a unit is selected to shoot, it can only resolve attacks using its Pistols and can only target one of the enemy units it is within Engagement Range of. In such circumstances, a Pistol can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

If a model is equipped with one or more Pistols, unless it is a MONSTER or VEHICLE model, it can either shoot with its Pistols or with all of its other ranged weapons. Declare whether such a model will shoot with its Pistols or its other ranged weapons before selecting targets.

  • Can be shot even if the bearer’s unit is within Engagement Range of enemy units, but must target one of those enemy units.
  • Cannot be shot alongside any other non-Pistol weapon (except by a MONSTER or VEHICLE).

The GRENADES keyword is used in the following T’au Empire datasheets:

Characters
GRENADE
1CP
Core – Wargear Stratagem
Priming their hand-held projectiles, these warriors draw back and hurl death into the enemy’s midst.
WHEN: Your Shooting phase.

TARGET: One GRENADES unit from your army that is not within Engagement Range of any enemy units and has not been selected to shoot this phase.

EFFECT: Select one enemy unit that is not within Engagement Range of any units from your army and is within 8" of and visible to your GRENADES unit. Roll six D6: for each 4+, that enemy unit suffers 1 mortal wound.
Benefit of Cover

Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.

Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.

Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.

  • Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
  • Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
  • Multiple instances are not cumulative.
GO TO GROUND
1CP
Core – Battle Tactic Stratagem
Seeking salvation from incoming fire, warriors hurl themselves into whatever cover they can find.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.

The TRANSPORT keyword is used in the following T’au Empire datasheets:

Dedicated Transports
Embark
If a unit makes a Normal, Advance or Fall Back move, and every model in that unit ends that move within 3" of a friendly TRANSPORT model, they can embark within it. A unit cannot embark if it has already disembarked from a TRANSPORT model in the same phase. Remove the unit from the battlefield and place it to one side – it is now embarked within that TRANSPORT model. Unless otherwise stated, units cannot do anything or be affected in any way while they are embarked.

  • A unit can embark within a friendly TRANSPORT if all of its models end a Normal, Advance or Fall Back move within 3" of that TRANSPORT.
  • A unit cannot embark and disembark in the same phase.
Transport Capacity
All TRANSPORT models have a transport capacity listed on their datasheet. This determines the type and maximum number of friendly models that can embark within them.

Units can start the battle embarked within a TRANSPORT model instead of being set up separately – declare which units are embarked within a TRANSPORT model before you set it up.

FIRING DECK

Some transports have firing hatches, ports or platforms from which embarked passengers can shoot.

Some TRANSPORT models have ‘Firing Deck x’ listed in their abilities. Each time such a model is selected to shoot in the Shooting phase, you can select up to ‘x’ models embarked within it. Then, for each of those embarked models, you can select one ranged weapon that embarked model is equipped with. Until that TRANSPORT model has resolved all of its attacks, it counts as being equipped with all of the weapons you selected in this way, in addition to its other weapons.

  • Firing Deck ‘x’: Each time this TRANSPORT shoots, select one weapon from up to ‘x’ models embarked within it; this TRANSPORT counts as being equipped with those weapons as well.
COMBAT EMBARKATION
1CP
Kauyon – Wargear Stratagem
Those who act as the lure in the Kauyon must be ready to make a hasty withdrawal once the enemy closes into killing range, lest they be trapped.
WHEN: Your opponent’s Charge phase, just after an enemy unit has declared a charge.

TARGET: One INFANTRY unit from your army that was selected as one of the targets of that charge, and one friendly TRANSPORT.

EFFECT: Your unit can embark within that TRANSPORT. If it does, your opponent can select new targets for that charge.

RESTRICTIONS: Every model in your INFANTRY unit must be within 3" of that TRANSPORT and there must be sufficient transport capacity to embark the entire unit.
PHOTON GRENADES
1CP
Kauyon – Wargear Stratagem
Hurling a volley of photon grenades, the T’au leave their enemies dazzled and disorientated, unable to close the distance into combat at a crucial moment.
WHEN: Your opponent’s Charge phase, just after an enemy unit has declared a charge.

TARGET: One GRENADES unit from your army that was selected as one of the targets of that charge.

EFFECT: That enemy unit must immediately take a Battle-shock test, and until the end of the phase, subtract 2 from Charge rolls made for that enemy unit.

The KROOT and INFANTRY keywords are used in the following T’au Empire datasheets:

Starting Strength
The number of models a unit contains when it is added to your army is known as its Starting Strength.
JOIN THE HUNT
2CP
Kroot Hunting Pack – Battle Tactic Stratagem
When a Kroot Hunting Pack closes in on its prey, there are often other hunters waiting to join in the fray and take their share of any spoils.
WHEN: Any phase.

TARGET: One KROOT INFANTRY or KROOT HOUNDS unit from your army that was just destroyed. You can use this Stratagem on that unit even though it was just destroyed.

EFFECT: Add a new unit to your army identical to your destroyed unit, in Strategic Reserves, at its Starting Strength.

RESTRICTIONS: This Stratagem cannot be used to return destroyed Character units to Attached units.
GUERRILLA WARRIORS
1CP
Kroot Hunting Pack – Strategic Ploy Stratagem
Kroot see no value in stand-up fights, caring little for honour or glory. They hit and fade, frustrating their foes and bleeding them by degrees until - weakened and out of position - they are rendered vulnerable.
WHEN: Your Movement phase, just after a KROOT unit from your army Falls Back.

TARGET: That KROOT unit.

EFFECT: Until the end of the turn, your unit is eligible to shoot and declare a charge.
A TRAP WELL LAID
1CP
Kroot Hunting Pack – Battle Tactic Stratagem
The Kroot have long perfected the art of ambush hunting, their packs working in deadly concert.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One KROOT unit from your army that has not been selected to shoot or fight this phase.

EFFECT: After your unit has resolved its attacks this phase, select one enemy unit that was hit by one or more of those attacks. Until the end of the phase, each time a KROOT model from your army makes an attack that targets that enemy unit, unless the attacking unit is Battle-shocked, improve the Armour Penetration characteristic of that attack by 1.

The KROOT and GRENADES keywords are used in the following T’au Empire datasheets:

EMP GRENADES
1CP
Kroot Hunting Pack – Wargear Stratagem
Furnished by T’au allies or returning Farstalkers, these electromagnetic grenades wreak havoc with the animuses of armoured fighting vehicles.
WHEN: Your opponent’s Shooting phase or the Fight phase, just after an enemy VEHICLE unit is selected to shoot or fight.

TARGET: One KROOT GRENADES unit from your army within 8" of that enemy VEHICLE unit.

EFFECT: Until the end of the phase, worsen the Weapon Skill and Ballistic Skill characteristics of that enemy Vehicle unit’s weapons by 1.
HIDDEN HUNTERS
1CP
Kroot Hunting Pack – Strategic Ploy Stratagem
The Kroot are experts in camouflage and concealment, able to utilise cover in ways most foes would never consider and - to their great misfortune - do not anticipate.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One KROOT unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, your unit can only be selected as the target of a ranged attack if the attacking model is within 12".
Below Half-strength
Some rules will refer to a unit being Below Half-strength.
  • If a unit has a Starting Strength of 1, then it is said to be Below Half-strength while its remaining number of wounds is less than half of its Wounds characteristic.
  • For any other unit, while the number of models in that unit is less than half of its Starting Strength, that unit is said to be Below Half-strength.
THE GRISLY FEAST
1CP
Kroot Hunting Pack – Strategic Ploy Stratagem
The psychological impact of witnessing one's comrades being dismembered and devoured by gore-splattered Kroot cannot be overstated.
WHEN: Fight phase.

TARGET: One KROOT unit from your army that destroyed one or more enemy units this phase.

EFFECT: In your opponent’s next Command phase, each enemy unit within 6" of your unit must take a Battle-shock test. If the unit taking that test is Below Half-strength, subtract 1 from that test. Enemy units affected by this Stratagem do not need to take any other Battle-shock tests in the same phase.
Hunter’s Instincts
Kroot Hunting Pack Detachment

The Kroot naturally predate upon weakened foes, drawn by the scent of spilled blood and viscera.

Each time a KROOT model from your army makes an attack, add 1 to the Hit roll if the target of that attack is below its Starting Strength, and add 1 to the Wound roll as well if the target of that attack is Below Half-strength.
Skirmish Fighters
Kroot Hunting Pack Detachment

Though ill-suited to protracted warfare, the Kroot are experts at light, swift skirmishing. Here their fieldcraft and wiry natural agility help them to evade the hostile attentions of their foes.

KROOT models from your army have a 6+ invulnerable save against melee attacks and a 5+ invulnerable save against ranged attacks.
© Vyacheslav Maltsev 2013-2024