Necrons – Convergence Of Dominion
 ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
Convergence Of Dominion
(⌀Use model)
M
-
T
9
Sv
3+
W
7
Ld
8+
OC
-
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Transdimensional abductor
Transdimensional abductor
18"
3
4+
6
-2
3
ABILITIES
FACTION: Reanimation Protocols
Reanimation Nodes (Aura): While a friendly NECRONS INFANTRY unit is within 6" of this Fortification, models in that unit have Feel No Pain 6+ ability.
Ancient Cover: Each time a ranged attack is allocated to a model, if that model is not fully visible to every model in the attacking unit because of this FORTIFICATION, that model has the Benefit of Cover against that attack.
Fortification: While an enemy unit is only within Engagement Range of one or more FORTIFICATIONS from your army:
  • That unit can still be selected as the target of ranged attacks, but each time such an attack is made, unless it is made with a Pistol, subtract 1 from the Hit roll.
  • Models in that unit do not need to take Desperate Escape tests due to Falling Back while Battle-shocked, except for those that will move over enemy models when doing so.
UNIT COMPOSITION
  • 1-3 Convergence of Dominion Starsteles
Every model is equipped with: transdimensional abductor.
1 model
60
2 models
120
3 models
180
DEPLOYMENT
When this unit is first set up on the battlefield, its models do not have to be set up in Unit Coherency. Instead, each model must be set up wholly within 12" of one other model from its unit. From that point on, each model in this unit is treated as a separate unit.
KEYWORDS: FORTIFICATION, VEHICLE, CONVERGENCE OF DOMINION
FACTION KEYWORDS:
NECRONS
STRATAGEMS
PROTOCOL OF THE UNDYING LEGIONS
1CP
Awakened Dynasty – Strategic Ploy
PROTOCOL OF THE CONQUERING TYRANT
1CP
Awakened Dynasty – Battle Tactic
PROTOCOL OF THE HUNGRY VOID
1CP
Awakened Dynasty – Battle Tactic
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
COSMIC PRECISION
1CP
Hypercrypt Legion – Strategic Ploy
QUANTUM DEFLECTION
1CP
Hypercrypt Legion – Wargear
ENSLAVED ARTIFICE
1CP
Obeisance Phalanx – Battle Tactic
NANOASSEMBLY PROTOCOLS
1CP
Obeisance Phalanx – Battle Tactic
CHRONOSHIFT
1CP
Starshatter Arsenal – Strategic Ploy
DIMENSIONAL TUNNEL
1CP
Starshatter Arsenal – Strategic Ploy
MERCILESS RECLAMATION
1CP
Starshatter Arsenal – Battle Tactic
UNYIELDING FORMS
1CP
Starshatter Arsenal – Battle Tactic
REACTIVE REPOSITION
1CP
Starshatter Arsenal – Strategic Ploy
ENDLESS SERVITUDE
1CP
Starshatter Arsenal – Strategic Ploy
DETACHMENT ABILITY
Relentless Onslaught
Hyperphasing
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
Reanimation Protocols

The Necron dynasties benefit from the nigh-on supernatural technologies that once saw them dominate the galaxy, perhaps the most unsettling of which are their reanimation protocols. Should a Necron be slain, its body becomes wreathed in an eerie glow. Crawling limbs reattach. Sundered torsos and smashed skulls reform amidst emerald sparks. Witch lights flare back to life within dead eye-lenses and the Necron rises again, shambling back into their battle line. Those Necrons too catastrophically damaged to reform vanish instead, teleported away to their tombs for repair.

If your Army Faction is , at the end of your Command phase, each unit from your army with this ability that is on the battlefield activates its Reanimation Protocols and reanimates D3 wounds. Each time such a unit reanimates a wound:
  • If that unit contains one or more models with fewer than their starting number of wounds remaining, select one of those models; that model regains one lost wound
  • If all models in that unit have their starting number of wounds, but that unit is not at its Starting Strength, one destroyed model is returned to that unit with one wound remaining.
Once such a unit is at its Starting Strength and all of its models have their starting number of wounds, nothing further happens.

Example: A unit of Lokhust Destroyers (which have a Wounds characteristic of 3) activates its Reanimation Protocols. The unit had a Starting Strength of 3, but currently contains 2 models, and one of those models has lost 1 wound. A 3 is rolled to see how many wounds are reanimated. The first of these reanimated wounds restores the wounded Lokhust Destroyer back to 3 wounds. The second of these reanimated wounds returns the destroyed Lokhust Destroyer to the battlefield with 1 wound remaining. The third of these reanimated wounds restores one of the remaining lost wounds to the same Lokhust Destroyer that was just returned. The unit now contains 3 models, two of which have 3 wounds remaining and one of which has 2 wounds remaining.
Hazardous

Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.

Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):
  • If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
  • Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
  • Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a model was selected, that unit suffers 3 mortal wounds and when allocating those mortal wounds, they must be allocated to the selected model.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.

Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.

  • After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.

Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.

  • A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Mortal Wounds

Some attacks are so powerful that no armour or force field can withstand their fury.

Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.

If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.

If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.

  • Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
  • Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.

Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.

  • Engagement Range: Within 1" horizontally and 5" vertically.
  • Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.

  • Advance Move: Models move up to M+D6".
  • Cannot move within Engagement Range of any enemy models.
  • Units that Advance cannot shoot or charge this turn.
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.

  • Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
  • Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
  • Critical Hit: Unmodified Hit roll of 6. Always successful.
  • An unmodified Hit roll of 1 always fails.
  • A Hit roll can never be modified by more than -1 or +1.
PROTOCOL OF THE CONQUERING TYRANT
1CP
Awakened Dynasty – Battle Tactic Stratagem
The legions employ the strategies of their masters in perfect synchronicity, laying down hails of mechanically coordinated fire.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack that targets a unit within half range, re-roll a Hit roll of 1. If a CHARACTER is leading your unit, until the end of the phase, you can re-roll the Hit roll for that attack instead.
PROTOCOL OF THE HUNGRY VOID
1CP
Awakened Dynasty – Battle Tactic Stratagem
Necrons strike with data-augmented accuracy.
WHEN: Fight phase.

TARGET: One unit from your army that has not been selected to fight this phase.

EFFECT: Until the end of the phase, add 1 to the Strength characteristic of melee weapons equipped by models in your unit. In addition, If a CHARACTER is leading your unit, until the end of the phase, improve the Armour Penetration characteristic of melee weapons equipped by models in your unit by 1. (this is not cumulative with any other modifiers that improve Armour Penetration].
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.

WOUND ROLL
ATTACK’S STRENGTH VS TARGET’S TOUGHNESSD6 RESULT REQUIRED
Strength is TWICE (or more than twice) the Toughness.
+
Strength is GREATER than the Toughness.
+
Strength is EQUAL to the Toughness.
+
Strength is LESS than the Toughness.
+
Strength is HALF (or less than half) the Toughness.
+

If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.

  • Critical Wound: Unmodified Wound roll of 6. Always successful.
  • An unmodified Wound roll of 1 always fails.
  • A Wound roll can never be modified by more than -1 or +1.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.

If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.

An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.

  • Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
  • An unmodified saving throw of 1 always fails.
  • A saving throw can never be improved by more than +1.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.

You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
  • Within Engagement Range of every unit that you selected as a target of the charge.
  • Without moving within Engagement Range of any enemy units that were not a target of the charge.
  • In Unit Coherency.
If any of these conditions cannot be met, the charge fails and no models in the charging unit move this phase. Otherwise, the charge is successful and the models in the charging unit make a Charge move – move each model a distance in inches up to the result of the Charge roll. When doing so, each model in the charging unit must end its Charge move closer to one of the units selected as a target of its charge. If you can also move a charging model so that it ends its Charge move in base-to-base contact with one or more enemy models while still enabling the charging unit to end its move satisfying all of the conditions above, you must do so. The controlling player chooses the order in which to move their models.

  • Charge Roll: 2D6".
  • Targets of a charge must be within 12" but do not need to be visible.
  • If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
  • Cannot move within Engagement Range of any unit that was not a target of the charge.
  • If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.

A unit cannot shoot or declare a charge in the same turn that it Fell Back.

Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.

Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.

  • Fall Back Move: Models move up to M".
  • Units that Fall Back cannot shoot or declare a charge in the same turn.
  • Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
  • If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
  • Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.

While a unit is Battle-shocked:

Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.

In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.

  • Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
  • Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
  • Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
  • Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.

TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).

EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
Blast

High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.

Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).

Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.

  • Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
  • Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase.

EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.

You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.

  • Unmodified Dice: the result after re-rolls, but before any modifiers.
  • A dice can never be re-rolled more than once.
  • You must re-roll all dice if several need adding together (e.g. 2D6).
  • Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.

TARGET: That unit from your army.

EFFECT: Your unit automatically passes that Battle-shock test.

RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.

FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance or Fall Back move, or declares a charge.

TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.

EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.

RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE

Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.

During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.
  • Unit can be set up in Reserves instead of on the battlefield.
  • Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.

TARGET: One unit from your army that is in Reserves.

EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).

RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Invulnerable Saves

Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.

Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.

Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.

  • Invulnerable Save: Never modified by an attack’s AP.
  • The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Benefit of Cover

Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.

Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.

Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.

  • Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
  • Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
  • Multiple instances are not cumulative.
Hyperphasing
Hypercrypt Legion Detachment

Employing fractal corridors, dolmen gates and ancient translocation science, the Necrons are able to phase in and out of existence. Nowhere is safe for the terrified foe as mechanoid hunters appear from unfolding planar lattices to slaughter or escape retribution into gulfs of darkness, only to materialise elsewhere to kill anew.

At the end of your opponent’s turn, you can select a number of units from your army (excluding units that are within Engagement Range of one or more enemy units). The maximum number of units you can select depends on the battle size, as follows:

BATTLE SIZENUMBER OF UNITS
IncursionUp to 1 units
Strike ForceUp to 2 units
OnslaughtUp to 3 units

Once you have made your selections, remove those units from the battlefield and place them into Strategic Reserves.
COSMIC PRECISION
1CP
Hypercrypt Legion – Strategic Ploy Stratagem
With a sanity-defying mechanism at the heart of the tomb, dynastic astromancers divine the pre-aligned point in space and time where a crucial role can be played in the wider battle plan.
WHEN: Your Movement phase.

TARGET: One unit from your army (excluding MONSTER units) that is arriving using the Deep Strike or Hyperphasing abilities this phase.

EFFECT: Your unit can be set up anywhere on the battlefield that is more than 6" horizontally away from all enemy models.

RESTRICTIONS: A unit targeted with this Stratagem is not eligible to declare a charge in the same turn.

The TITANIC keyword is used in the following Necrons datasheets:

ENSLAVED ARTIFICE
1CP
Obeisance Phalanx – Battle Tactic Stratagem
It is not only android soldiery that be compelled to serve. With a command, prized war engines and ornate weapons are empowered to hyperlethality.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One unit from your army (excluding TITANIC units) that has not been selected to shoot or fight this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack, an unmodified Hit roll of 5+ scores a Critical Hit.
Objective Markers
Objective markers represent objects of tactical or strategic import that both sides are attempting to secure, such as valuable artefacts, vital supplies or communications nodes. If a mission uses objective markers, it will state where they are located on the battlefield. These can be represented using any suitable marker, but we recommend using round markers that are 40mm in diameter.

When setting objective markers up on the battlefield, place them so they are centred on the point specified by the mission. When measuring distances to and from objective markers, measure to and from the closest part of them. Models can move over objective markers as if they were not there, but they cannot end a move on top of an objective marker.

At the start of the battle, each objective marker on the battlefield is said to be contested, and so is not controlled by either player. To control an objective marker, a player will first need to move models within range of it. A model is within range of an objective marker if it is within 3" horizontally and 5" vertically of that objective marker.

Every model has an Objective Control (OC) characteristic listed on its datasheet. To determine a player’s Level of Control over an objective marker, add together the OC characteristics of all the models from that player’s army that are within range of that objective marker. A player will control an objective marker at the end of any phase or turn if their Level of Control over it is greater than their opponent’s. If both players have the same Level of Control over an objective marker, that objective marker is contested.

  • A model is within range of an objective marker if within 3" horizontally and 5" vertically.
  • Level of Control: Add together the OC characteristics of all of a player’s models within range of the objective marker.
  • An objective marker is controlled by the player with the highest Level of Control over it (in a tie, it is contested).
  • Models cannot end a move on top of an objective marker.
MERCILESS RECLAMATION
1CP
Starshatter Arsenal – Battle Tactic Stratagem
The Necrons are driven to reclaim what is theirs, exterminating all who would impede such efforts without mercy.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One unit (excluding TITANIC units) from your army that has not been selected to shoot or fight this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack, if the target of that attack is within range of one or more objective markers, add 1 to the Wound roll.

The MOUNTED keyword is used in the following Necrons datasheets:

Characters
REACTIVE REPOSITION
1CP
Starshatter Arsenal – Strategic Ploy Stratagem
Subroutines buried deep within the neural networks of Necron soldiers and crews enable them to react instantaneously to targeting locks, repositioning themselves to evade incoming fire or close in upon the foe.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has shot.

TARGET: One unit from your army (excluding TITANIC units) that was the target of one or more of the attacking unit’s attacks.

EFFECT: Your unit can make a Normal move of up to D6", or up to 6" instead if it is a MOUNTED or VEHICLE unit.
ENDLESS SERVITUDE
1CP
Starshatter Arsenal – Strategic Ploy Stratagem
Should the unclean thralls of lesser species threaten dynastic territories, the fallen Necron soldiery will rise to repel the interlopers.
WHEN: End of your Fight phase.

TARGET: One unit (excluding TITANIC units) from your army that is within range of one or more objective markers you control.

EFFECT: Your unit’s Reanimation Protocols activate.
Relentless Onslaught
Starshatter Arsenal Detachment

The Necrons possess countless terrifying engines of war. When mustered in great number, these instruments of annihilation sweep across the battlefield, seeking to reclaim lost realms and obliterate any foolish enough to trespass upon the territories of their ancient dynasty.

Each time a model from your army makes an attack that targets a unit within range of one or more objective markers, add 1 to the Hit roll. In addition, ranged weapons equipped by VEHICLE and MOUNTED models (excluding TITANIC models) from your army have the [ASSAULT] ability.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Feel No Pain
FEEL NO PAIN

Some warriors refuse to be laid low, even by what should be fatal wounds.

Some models have ‘Feel No Pain x+’ listed in their abilities. Each time a model with this ability suffers damage and so would lose a wound (including wounds lost due to mortal wounds), roll one D6: if the result is greater than or equal to the number denoted by ‘x’, that wound is ignored and is not lost. If a model has more than one Feel No Pain ability, you can only use one of those abilities each time that model suffers damage and so would lose a wound.

  • Feel No Pain x+: Each time this model would lose a wound, roll one D6: if the result equals or exceeds ‘x’, that wound is not lost.
QUANTUM DEFLECTION
1CP
Hypercrypt Legion – Wargear Stratagem
Necron quantum shielding is a true marvel of techno-arcana. Channelled with energy reserves from the rising tomb structures, the shielding is capable of adaptive remodulation to diffuse and deflect the most powerful enemy attacks.
WHEN: Your opponent’s Shooting phase or the Fight phase, just after an enemy unit has selected its targets.

TARGET: One VEHICLE unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, models in your unit have a 4+ invulnerable save.
NANOASSEMBLY PROTOCOLS
1CP
Obeisance Phalanx – Battle Tactic Stratagem
A tomb world’s war engines are the pride of its nobility and they will suffer no affront to them, demanding the reassembly of slablike armour atom by atom even as the foe seek to sunder the vehicles.
WHEN: Your opponent’s Shooting phase or the Fight phase, just after an enemy unit has selected its targets.

TARGET: One VEHICLE unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, each time an attack is allocated to a model in your unit, subtract 1 from the Damage characteristic of that attack.
CHRONOSHIFT
1CP
Starshatter Arsenal – Strategic Ploy Stratagem
The time-bending technologies in the nobility’s powerful vehicles allow them to traverse the battlefield in stuttering bursts of hypervelocity.
WHEN: Your Movement phase.

TARGET: One VEHICLE or MOUNTED unit (excluding TITANIC units) from your army that has not been selected to move this phase.

EFFECT: Until the end of the phase, if your unit Advances, do not make an Advance roll for it. Instead, until the end of the phase, add 6" to the Move characteristic of models in your unit.
DIMENSIONAL TUNNEL
1CP
Starshatter Arsenal – Strategic Ploy Stratagem
Using phase-shifting technology, Necron war engines can slip into alternate dimensions, leaving only ghostly traces as they move through solid matter.
WHEN: Your Movement phase.

TARGET: One VEHICLE or MOUNTED unit (excluding TITANIC units) from your army.

EFFECT: Until the end of the phase, models in your unit can move horizontally through models and terrain features.
UNYIELDING FORMS
1CP
Starshatter Arsenal – Battle Tactic Stratagem
Wrought from living metal and further protected by the arcane technologies of Crypteks, the forms of Necron vehicles and steeds are almost impervious to conventional weapons.
WHEN: Your opponent’s Shooting phase or the Fight phase, just after an enemy unit has selected its targets.

TARGET: One VEHICLE or MOUNTED unit (excluding TITANIC units) from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, each time an attack targets a model in your unit, if the Strength characteristic of that attack is greater than the Toughness characteristic of that unit, subtract 1 from the Wound roll.
PROTOCOL OF THE UNDYING LEGIONS
1CP
Awakened Dynasty – Strategic Ploy Stratagem
Nanoscarabs are released in boiling black clouds that whirl about the legions and effect rapid repairs
WHEN: Your opponent’s Shooting phase or the Fight phase, just after an enemy unit has resolved its attacks.

TARGET: One unit from your army that had one or more of its models destroyed as a result of the attacking unit’s attacks.

EFFECT: Your unit activates its Reanimation Protocols and reanimates D3 wounds (or D3+1 wounds if a CHARACTER is leading your unit].

The FORTIFICATION keyword is used in the following Necrons datasheets:

The FORTIFICATION keyword is used in the following Necrons datasheets:

Unit Coherency
A unit that contains more than one model must be set up and end any kind of move as a single group, with all of its models within 2" horizontally and 5" vertically of at least one other model from that unit. While a unit has seven or more models, all of its models must instead be set up and end any kind of move within 2" horizontally and 5" vertically of at least two other models from that unit. This is called Unit Coherency.

If for any reason a model cannot be set up in Unit Coherency, or cannot be set up following any restrictions stated by other rules (e.g. while setting up using the Deep Strike ability), that unit cannot be set up. If a unit cannot end a move in Unit Coherency, it cannot make that move and its models are returned to their previous positions.

At the end of every turn, each player must remove models, one at a time, from any of the units from their armies that are no longer in Unit Coherency, until only a single group of models from each of those units remains in play and in Unit Coherency. Models removed in this way count as having been destroyed, but they never trigger any rules that apply when a model is destroyed.

  • Unit Coherency: Within 2" horizontally and 5" vertically of:
    • One other model from the same unit (in units of 2-6 models).
    • Two other models from the same unit (in units of 7+ models).
  • At the end of every turn, if a unit is not in Unit Coherency, the controlling player must remove models until that unit is in Unit Coherency again.
© Vyacheslav Maltsev 2013-2024