Chaos Daemons – Feculent Gnarlmaw
WARGEAR OPTIONS
- None
ABILITIES
CORE: Infiltrators
FACTION: The Shadow of Chaos
Shroud of Flies (Aura): While a friendly NURGLE unit is within 6" of this FORTIFICATION, models in that unit have the Stealth ability.Diseased Cover: Each time a ranged attack is allocated to a model, if that model is not fully visible to every model in the attacking unit because of this FORTIFICATION, that model has the Benefit of Cover against that attack.Fortification: While an enemy unit is only within Engagement Range of one or more FORTIFICATIONS from your army:
- That unit can still be selected as the target of ranged attacks, but each time such an attack is made, unless it is made with a Pistol, subtract 1 from the Hit roll.
- Models in that unit so not need to take Desperate Escape tests due to Falling Back while Battle-shocked, except for those that will move over enemy models when doing so.
UNIT COMPOSITION
- 1 Feculent Gnarlmaw
| 1 model | 100 |
KEYWORDS: FORTIFICATION, CHAOS, DAEMON, NURGLE, FECULENT GNARLMAW
FACTION KEYWORDS:
STRATAGEMS
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
INSUBSTANTIAL ENTITIES
1CP
Daemonic Incursion – Strategic Ploy
INCORPOREAL TERRORS
1CP
Daemonic Incursion – Battle Tactic
PARTING BLOWS
1CP
Daemonic Incursion – Strategic Ploy
DENIZENS OF THE WARP
1CP
Demonic Incursion – Strategic Ploy
THE REALM OF CHAOS
1CP
Demonic Incursion – Battle Tactic
CORRUPT REALSPACE
1CP
Demonic Incursion – Strategic Ploy
DRAUGHT OF TERROR
1CP
Demonic Incursion – Battle Tactic
DAEMONIC INVULNERABILITY
1CP
Demonic Incursion – Battle Tactic
WARP SURGE
1CP
Demonic Incursion – Strategic Ploy
DETACHMENT ABILITY
Warp Rifts
Unnatural Energies
DEEP STRIKE
Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.
During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.- Unit can be set up in Reserves instead of on the battlefield.
- Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.
- Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
- Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
- Critical Hit: Unmodified Hit roll of 6. Always successful.
- An unmodified Hit roll of 1 always fails.
- A Hit roll can never be modified by more than -1 or +1.
STEALTH
Some warriors are masters of disguise and concealment.
If every model in a unit has this ability, then each time a ranged attack is made against it, subtract 1 from that attack’s Hit roll.2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.While a unit is Battle-shocked:
- The Objective Control characteristic of all of its models is 0.
- If it Falls Back, you must take a Desperate Escape test for every model in that unit.
- Its controlling player cannot use Stratagems to affect that unit.
Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.
In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.
- Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
- Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
- Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
- Battle-shocked units must take Desperate Escape tests if they Fall Back.
The BATTLELINE keyword is used in the following Chaos Daemons datasheets:
Hazardous
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.
Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):- If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
- Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
- Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.
Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.
- After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.
- A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Mortal Wounds
Some attacks are so powerful that no armour or force field can withstand their fury.
Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.
If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.
If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.
- Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
- Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
The Shadow of Chaos
When daemons pour into realspace, maelstroms of warp energy spill through in their wake. Manifest emotion and unbridled, nightmarish forces twist all that they touch, reshaping the landscape into bizarre forms while tormenting mortal beings to madness. To be embroiled in such tempests is to endure conditions utterly anathema to the fundamental laws of reality, provoking primal terror in even the most emotionless warriors.
If your Army Faction is , certain areas of the battlefield are considered to be within your army’s Shadow of Chaos, as follows:- Your deployment zone is always within your army’s Shadow of Chaos.
- At the start of any phase, if you control at least half of the objective markers within No Man’s Land, until the end of that phase, No Man’s Land is within your army’s Shadow of Chaos.
- At the start of any phase, if you control at least half of the objective markers within your opponent’s deployment zone, until the end of that phase, your opponent’s deployment zone is within your army’s Shadow of Chaos.
DAEMONIC MANIFESTATION While a unit from your army is within your army’s Shadow of Chaos, each time that unit takes a Battle-shock test, add 1 to that test and, if that test is passed, one model in that unit regains up to D3 lost wounds (if that unit is a BATTLELINE unit and that test is passed, up to D3 destroyed models can be returned to that unit instead). |
DAEMONIC TERROR While an enemy unit is within your army’s Shadow of Chaos and/or it is within 6" of one or more BLOODTHIRSTER, GREAT UNCLEAN ONE, KAIROS FATEWEAVER, KEEPER OF SECRETS, LORD OF CHANGE, ROTIGUS, SHALAXI HELBANE or SKARBRAND units from your army, each time that unit takes a Battle-shock test, subtract 1 from that test and, if that test is failed, that enemy unit suffers D3 mortal wounds. |
The keyword is used in the following Chaos Daemons datasheets:
Characters
The CHAOS keyword is used in the following Chaos Daemons datasheets:
Characters
The DAEMON keyword is used in the following Chaos Daemons datasheets:
Characters
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.
| ||||||||||||||
If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.
An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.
- Critical Wound: Unmodified Wound roll of 6. Always successful.
- An unmodified Wound roll of 1 always fails.
- A Wound roll can never be modified by more than -1 or +1.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.
An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.
- Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
- An unmodified saving throw of 1 always fails.
- A saving throw can never be improved by more than +1.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.- Advance Move: Models move up to M+D6".
- Cannot move within Engagement Range of any enemy models.
- Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
- Within Engagement Range of every unit that you selected as a target of the charge.
- Without moving within Engagement Range of any enemy units that were not a target of the charge.
- In Unit Coherency.
- Charge Roll: 2D6".
- Targets of a charge must be within 12" but do not need to be visible.
- If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
- Cannot move within Engagement Range of any unit that was not a target of the charge.
- If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.
A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
- Fall Back Move: Models move up to M".
- Units that Fall Back cannot shoot or declare a charge in the same turn.
- Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
- If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
- Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
Blast
High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.
Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.
- Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
- Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.
- Engagement Range: Within 1" horizontally and 5" vertically.
- Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.
- Unmodified Dice: the result after re-rolls, but before any modifiers.
- A dice can never be re-rolled more than once.
- You must re-roll all dice if several need adding together (e.g. 2D6).
- Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.
TARGET: That unit from your army.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
TARGET: That unit from your army.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Invulnerable Saves
Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.
Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.
- Invulnerable Save: Never modified by an attack’s AP.
- The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Benefit of Cover
Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.
Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.
- Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
- Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
- Multiple instances are not cumulative.
INSUBSTANTIAL ENTITIES
1CP
Daemonic Incursion – Strategic Ploy Stratagem
Physical barriers are no obstacle to creatures that can will their desires into being with but a twist of their supernatural powers.
WHEN: Your Movement phase.
TARGET: One unit from your army that has not been selected to move this phase.
EFFECT: The next time your unit is selected to move this phase, models in that unit can move through Walls and closed Hatchways as if they were not there, but when doing so, no model can move more than 6".
RESTRICTIONS: You can only use this Stratagem once.
TARGET: One unit from your army that has not been selected to move this phase.
EFFECT: The next time your unit is selected to move this phase, models in that unit can move through Walls and closed Hatchways as if they were not there, but when doing so, no model can move more than 6".
RESTRICTIONS: You can only use this Stratagem once.
INCORPOREAL TERRORS
1CP
Daemonic Incursion – Battle Tactic Stratagem
Even as enemy fire whips towards them, the daemons simply cease to inhabit corporeal space for a flickerbeat before solidifying once more.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One unit from your army that was selected as the target of one or more of the attacking unit's attacks.
EFFECT: Until the end of the phase, each time an attack targets your unit, subtract 1 from the Hit roll.
TARGET: One unit from your army that was selected as the target of one or more of the attacking unit's attacks.
EFFECT: Until the end of the phase, each time an attack targets your unit, subtract 1 from the Hit roll.
PARTING BLOWS
1CP
Daemonic Incursion – Strategic Ploy Stratagem
Able to manifest with particular vehemence within these warp-cursed corridors, the daemons hold their corporeal forms together long enough to strike at those who banish them.
WHEN: Fight phase, just after an enemy unit has selected its targets.
TARGET: One unit from your army that was selected as the target of one or more of the attacking unit's attacks.
EFFECT: Until the end of the phase, each time a model in your unit is destroyed, if that model has not fought this phase, roll one D6: on a 4+, do not remove it from play. That destroyed model can fight after the attacking unit has finished making its attacks, and is then removed from play.
TARGET: One unit from your army that was selected as the target of one or more of the attacking unit's attacks.
EFFECT: Until the end of the phase, each time a model in your unit is destroyed, if that model has not fought this phase, roll one D6: on a 4+, do not remove it from play. That destroyed model can fight after the attacking unit has finished making its attacks, and is then removed from play.
DENIZENS OF THE WARP
1CP
Demonic Incursion – Strategic Ploy Stratagem
Ever lurking in the warp, daemons will wait until the barriers between realms thin before tearing their way into realspace.
WHEN: Your Movement phase.
TARGET: One unit from your army that is arriving using the Deep Strike ability this phase.
EFFECT: Your unit can be set up anywhere on the battlefield that is more than 3" horizontally away from all enemy models.
RESTRICTIONS: A unit targeted by this Stratagem is not eligible to declare a charge in the same turn.
TARGET: One unit from your army that is arriving using the Deep Strike ability this phase.
EFFECT: Your unit can be set up anywhere on the battlefield that is more than 3" horizontally away from all enemy models.
RESTRICTIONS: A unit targeted by this Stratagem is not eligible to declare a charge in the same turn.
THE REALM OF CHAOS
1CP
Demonic Incursion – Battle Tactic Stratagem
When the energies of the warp bleed into realspace, the Legiones Daemonica can rip open portals in seeming thin-air, returning to their hellscapes only to rematerialise amidst their foes a heartbeat later.
WHEN: End of your opponent’s turn.
TARGET: Up to two units from your army that are within your army’s Shadow of Chaos, or one other unit from your army.
EFFECT: Remove the targeted units from the battlefield and place them into Strategic Reserves. They will arrive back on the battlefield in the Reinforcements step of your next Movement phase using the Deep Strike ability.
RESTRICTIONS: You cannot target units that are within Engagement Range of one or more enemy units with this Stratagem.
TARGET: Up to two units from your army that are within your army’s Shadow of Chaos, or one other unit from your army.
EFFECT: Remove the targeted units from the battlefield and place them into Strategic Reserves. They will arrive back on the battlefield in the Reinforcements step of your next Movement phase using the Deep Strike ability.
RESTRICTIONS: You cannot target units that are within Engagement Range of one or more enemy units with this Stratagem.
Objective Markers
Objective markers represent objects of tactical or strategic import that both sides are attempting to secure, such as valuable artefacts, vital supplies or communications nodes. If a mission uses objective markers, it will state where they are located on the battlefield. These can be represented using any suitable marker, but we recommend using round markers that are 40mm in diameter.When setting objective markers up on the battlefield, place them so they are centred on the point specified by the mission. When measuring distances to and from objective markers, measure to and from the closest part of them. Models can move over objective markers as if they were not there, but they cannot end a move on top of an objective marker.
At the start of the battle, each objective marker on the battlefield is said to be contested, and so is not controlled by either player. To control an objective marker, a player will first need to move models within range of it. A model is within range of an objective marker if it is within 3" horizontally and 5" vertically of that objective marker.
Every model has an Objective Control (OC) characteristic listed on its datasheet. To determine a player’s Level of Control over an objective marker, add together the OC characteristics of all the models from that player’s army that are within range of that objective marker. A player will control an objective marker at the end of any phase or turn if their Level of Control over it is greater than their opponent’s. If both players have the same Level of Control over an objective marker, that objective marker is contested.
- A model is within range of an objective marker if within 3" horizontally and 5" vertically.
- Level of Control: Add together the OC characteristics of all of a player’s models within range of the objective marker.
- An objective marker is controlled by the player with the highest Level of Control over it (in a tie, it is contested).
- Models cannot end a move on top of an objective marker.
CORRUPT REALSPACE
1CP
Demonic Incursion – Strategic Ploy Stratagem
Daemons instinctively feel the need to despoil and corrupt every corner of realspace, the better to sustain their otherworldly forms.
WHEN: Start of any Command phase.
TARGET: One unit from your army that is within range of an objective marker you control.
EFFECT: That objective marker is said to be Corrupted and remains under your control, even if you have no models within range of it, until your opponent controls it at the start or end of any turn. In addition, while an objective marker is Corrupted and under your control, the area of the battlefield within 6" of that objective marker is considered to be within your army’s Shadow of Chaos.
TARGET: One unit from your army that is within range of an objective marker you control.
EFFECT: That objective marker is said to be Corrupted and remains under your control, even if you have no models within range of it, until your opponent controls it at the start or end of any turn. In addition, while an objective marker is Corrupted and under your control, the area of the battlefield within 6" of that objective marker is considered to be within your army’s Shadow of Chaos.
DRAUGHT OF TERROR
1CP
Demonic Incursion – Battle Tactic Stratagem
The swelling fear of their mortal prey serves as an intoxicating elixir to the daemonic followers, each draught invigorating their forms with deadly power.
WHEN: Your Shooting phase or the Fight phase.
TARGET: One unit from your army that has not been selected to shoot or fight this phase.
EFFECT: Until the end of the phase, improve the Armour Penetration characteristic of weapons equipped by models in that unit by 1. In addition, until the end of the phase, each time such a weapon targets a unit that is Battle-shocked, you can re-roll the Wound roll.
TARGET: One unit from your army that has not been selected to shoot or fight this phase.
EFFECT: Until the end of the phase, improve the Armour Penetration characteristic of weapons equipped by models in that unit by 1. In addition, until the end of the phase, each time such a weapon targets a unit that is Battle-shocked, you can re-roll the Wound roll.
DAEMONIC INVULNERABILITY
1CP
Demonic Incursion – Battle Tactic Stratagem
Daemons are madness given form. Their very bodies are fashioned from the stuff of the warp, and are difficult to destroy through conventional means.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One unit from your army that was selected as the target of one or more of that enemy unit’s attacks.
EFFECT: Until the end of the phase, each time an invulnerable saving throw is made for a model in your unit, re-roll a saving throw of 1.
TARGET: One unit from your army that was selected as the target of one or more of that enemy unit’s attacks.
EFFECT: Until the end of the phase, each time an invulnerable saving throw is made for a model in your unit, re-roll a saving throw of 1.
WARP SURGE
1CP
Demonic Incursion – Strategic Ploy Stratagem
The winds of the warp blow strong, invigorating daemonkind and lending them supernatural speed and ferocity.
WHEN: Your Charge phase.
TARGET: One unit from your army that is within your army’s Shadow of Chaos.
EFFECT: Until the end of the phase, your unit is eligible to declare a charge in a turn in which it Advanced
TARGET: One unit from your army that is within your army’s Shadow of Chaos.
EFFECT: Until the end of the phase, your unit is eligible to declare a charge in a turn in which it Advanced
Warp Rifts
Daemonic Incursion Detachment
Daemonic legions tear through the fabric of realspace, malevolent entities flickering into being like phantasms from a nightmare. Worse still, as terror and panic take hold of their victims, so their mortal souls become ever easier prey for the entities pouring through from the warp.
Each time a unit from your army is set up on the battlefield using the Deep Strike ability, if it is set up wholly within your army’s Shadow of Chaos, and/or if it is set up wholly within 6" of one or more friendly BLOODTHIRSTER, GREAT UNCLEAN ONE, KAIROS FATEWEAVER, KEEPER OF SECRETS, LORD OF CHANGE, ROTIGUS, SHALAXI HELBANE or SKARBRAND units with which it shares the KHORNE, TZEENTCH, NURGLE or SLAANESH keyword, it can be set up anywhere that is more than 6" horizontally away from all enemy models, instead of more than 9".Unnatural Energies
Daemonic Incursion Detachment
Infernal power pours into the breached voidship like a floodtide, allowing the warp entities to reshape the rapidly denaturing stuff of reality itself to their whims.
units from your army can perform one of the following Tactical Manoeuvres in a turn in which they Advanced or Fell Back: Secure Site; Set To Defend; Set Overwatch.Army List
Datasheets collatedCharacters
Fortifications
INFILTRATORS
Many armies employ reconnaissance units who can sit concealed, waiting for the right moment to strike.
During deployment, if every model in a unit has this ability, then when you set it up, it can be set up anywhere on the battlefield that is more than 9" horizontally away from the enemy deployment zone and all enemy models.The FORTIFICATION keyword is used in the following Chaos Daemons datasheets:
Pistol
Pistols can be wielded even at point-blank range.
Weapons with [PISTOL] in their profile are known as Pistols. If a unit contains any models equipped with Pistols, that unit is eligible to shoot in its controlling player’s Shooting phase even while it is within Engagement Range of one or more enemy units. When such a unit is selected to shoot, it can only resolve attacks using its Pistols and can only target one of the enemy units it is within Engagement Range of. In such circumstances, a Pistol can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.If a model is equipped with one or more Pistols, unless it is a MONSTER or VEHICLE model, it can either shoot with its Pistols or with all of its other ranged weapons. Declare whether such a model will shoot with its Pistols or its other ranged weapons before selecting targets.
- Can be shot even if the bearer’s unit is within Engagement Range of enemy units, but must target one of those enemy units.
- Cannot be shot alongside any other non-Pistol weapon (except by a MONSTER or VEHICLE).
The FORTIFICATION keyword is used in the following Chaos Daemons datasheets:
The NURGLE and keywords are used in the following Chaos Daemons datasheets:
Characters
Fortifications
The NURGLE keyword is used in the following Chaos Daemons datasheets:
Characters
Fortifications