Drukhari – Troupe Master
 ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
Troupe Master
(⌀25mm)
M
8"
T
3
Sv
6+
W
4
Ld
6+
OC
1
INVULNERABLE SAVE
4+
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Fusion pistol [assault, melta 2, pistol]
Fusion pistol [assault, melta 2, pistol]
6"
1
2+
8
-4
D3
Neuro disruptor [anti-infantry 2+, assault, pistol]
Neuro disruptor [anti-infantry 2+, assault, pistol]
12"
1
2+
4
0
1
Shuriken pistol [assault, pistol]
Shuriken pistol [assault, pistol]
12"
1
2+
4
-1
1
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Harlequin’s special weapon
Harlequin’s special weapon
Melee
5
2+
4
-1
1
Troupe Master’s blade
Troupe Master’s blade
Melee
6
2+
4
-2
1
WARGEAR OPTIONS
  • This model’s Troupe Master’s blade can be replaced with 1 Harlequin’s special weapon.
  • This model’s shuriken pistol can be replaced with one of the following:
    • 1 fusion pistol
    • 1 neuro disruptor

ABILITIES
CORE: Leader
FACTION: Strands of Fate
Cegorach’s Favour: Once per turn, when you use a Fate dice to substitute a Hit roll, a Wound roll or a saving throw made for this model, you can first change the result of that Fate dice to a 6.
Choreographer of War: While this model is leading a unit, melee weapons equipped by models in that unit have the [DEVASTATING WOUNDS] ability.
UNIT COMPOSITION
  • 1 Troupe Master
This model is equipped with: shuriken pistol; Troupe Master’s blade.
1 model
55
LEADER
This model can be attached to the following unit:
TROUPE MASTER
If this model is your Warlord, TROUPE units from your army have the BATTLELINE keyword.
KEYWORDS: INFANTRY, CHARACTER, GRENADES, HARLEQUINS, TROUPE MASTER
FACTION KEYWORDS:
AELDARI
STRATAGEMS
BATTLEFIELD COMMAND
1CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GRENADE
1CP
Core – Wargear
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
EPIC CHALLENGE
1CP
Core – Epic Deed
C
SCINTILLATING TEMPO
1CP
Reaper’s Wager – Strategic Ploy
SHORTEN THE ODDS
1CP
Reaper’s Wager – Strategic Ploy
DANCE MACABRE
2CP
Reaper’s Wager – Strategic Ploy
MALICIOUS FRENZY
1CP
Reaper’s Wager – Battle Tactic
FATEFUL ROLE
1CP
Reaper’s Wager – Strategic Ploy
MURDERER’S CIRCUS
1CP
Reaper’s Wager – Battle Tactic
DETACHMENT ABILITY
Callous Competition
ENHANCEMENTS
Archraider
15
Webway Walker
15
Reaper’s Cowl
25
Hazardous

Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.

Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):
  • If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
  • Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
  • Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a model was selected, that unit suffers 3 mortal wounds and when allocating those mortal wounds, they must be allocated to the selected model.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.

Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.

  • After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.

Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.

  • A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Mortal Wounds

Some attacks are so powerful that no armour or force field can withstand their fury.

Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.

If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.

If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.

  • Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
  • Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Anti

Certain weapons are the bane of a particular foe.

Weapons with [ANTI-KEYWORD X+] in their profile are known as Anti weapons. Each time an attack is made with such a weapon against a target with the keyword after the word ‘Anti-’, an unmodified Wound roll of ‘x+’ scores a Critical Wound.

Example: An attack made with an [ANTI-VEHICLE 4+] weapon will score a Critical Wound against – and so successfully wound – a VEHICLE unit on an unmodified Wound roll of 4+, while an attack made with an [ANTI-PSYKER 2+] weapon will score a Critical Wound against – and so successfully wound – a PSYKER unit on an unmodified Wound roll of 2+.

  • [ANTI-KEYWORD X+]: An unmodified Wound roll of ‘x+’ against a target with the matching keyword scores a Critical Wound.
Precision

Precision attacks can pick high-value targets out in a crowd, whether through the unerring aim of a sniper or the pinpoint accuracy of a blade-master’s strike.

Weapons with [PRECISION] in their profile are known as Precision weapons. Each time an attack made with such a weapon successfully wounds an Attached unit (see Leader ability), if a CHARACTER model in that unit is visible to the attacking model, the attacking model’s player can choose to have that attack allocated to that CHARACTER model instead of following the normal attack sequence.

  • When targeting an Attached unit, the attacking model’s player can have the attack allocated to a CHARACTER model in that unit visible to the bearer.
Pistol

Pistols can be wielded even at point-blank range.

Weapons with [PISTOL] in their profile are known as Pistols. If a unit contains any models equipped with Pistols, that unit is eligible to shoot in its controlling player’s Shooting phase even while it is within Engagement Range of one or more enemy units. When such a unit is selected to shoot, it can only resolve attacks using its Pistols and can only target one of the enemy units it is within Engagement Range of. In such circumstances, a Pistol can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

If a model is equipped with one or more Pistols, unless it is a MONSTER or VEHICLE model, it can either shoot with its Pistols or with all of its other ranged weapons. Declare whether such a model will shoot with its Pistols or its other ranged weapons before selecting targets.

  • Can be shot even if the bearer’s unit is within Engagement Range of enemy units, but must target one of those enemy units.
  • Cannot be shot alongside any other non-Pistol weapon (except by a MONSTER or VEHICLE).
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.

  • Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
  • Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
  • Critical Hit: Unmodified Hit roll of 6. Always successful.
  • An unmodified Hit roll of 1 always fails.
  • A Hit roll can never be modified by more than -1 or +1.
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.

WOUND ROLL
ATTACK’S STRENGTH VS TARGET’S TOUGHNESSD6 RESULT REQUIRED
Strength is TWICE (or more than twice) the Toughness.
+
Strength is GREATER than the Toughness.
+
Strength is EQUAL to the Toughness.
+
Strength is LESS than the Toughness.
+
Strength is HALF (or less than half) the Toughness.
+

If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.

  • Critical Wound: Unmodified Wound roll of 6. Always successful.
  • An unmodified Wound roll of 1 always fails.
  • A Wound roll can never be modified by more than -1 or +1.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.

If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.

An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.

  • Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
  • An unmodified saving throw of 1 always fails.
  • A saving throw can never be improved by more than +1.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.

  • Advance Move: Models move up to M+D6".
  • Cannot move within Engagement Range of any enemy models.
  • Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.

You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
  • Within Engagement Range of every unit that you selected as a target of the charge.
  • Without moving within Engagement Range of any enemy units that were not a target of the charge.
  • In Unit Coherency.
If any of these conditions cannot be met, the charge fails and no models in the charging unit move this phase. Otherwise, the charge is successful and the models in the charging unit make a Charge move – move each model a distance in inches up to the result of the Charge roll. When doing so, each model in the charging unit must end its Charge move closer to one of the units selected as a target of its charge. If you can also move a charging model so that it ends its Charge move in base-to-base contact with one or more enemy models while still enabling the charging unit to end its move satisfying all of the conditions above, you must do so. The controlling player chooses the order in which to move their models.

  • Charge Roll: 2D6".
  • Targets of a charge must be within 12" but do not need to be visible.
  • If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
  • Cannot move within Engagement Range of any unit that was not a target of the charge.
  • If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.

A unit cannot shoot or declare a charge in the same turn that it Fell Back.

Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.

Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.

  • Fall Back Move: Models move up to M".
  • Units that Fall Back cannot shoot or declare a charge in the same turn.
  • Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
  • If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
  • Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.

While a unit is Battle-shocked:

Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.

In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.

  • Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
  • Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
  • Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
  • Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.

TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).

EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
Blast

High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.

Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).

Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.

  • Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
  • Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase.

EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.

Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.

  • Engagement Range: Within 1" horizontally and 5" vertically.
  • Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.

You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.

  • Unmodified Dice: the result after re-rolls, but before any modifiers.
  • A dice can never be re-rolled more than once.
  • You must re-roll all dice if several need adding together (e.g. 2D6).
  • Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.

TARGET: That unit from your army.

EFFECT: Your unit automatically passes that Battle-shock test.

RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.

FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance or Fall Back move, or declares a charge.

TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.

EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.

RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE

Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.

During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.
  • Unit can be set up in Reserves instead of on the battlefield.
  • Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.

TARGET: One unit from your army that is in Reserves.

EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).

RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Invulnerable Saves

Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.

Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.

Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.

  • Invulnerable Save: Never modified by an attack’s AP.
  • The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Benefit of Cover

Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.

Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.

Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.

  • Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
  • Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
  • Multiple instances are not cumulative.
GO TO GROUND
1CP
Core – Battle Tactic Stratagem
Seeking salvation from incoming fire, warriors hurl themselves into whatever cover they can find.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
Charge Bonus

Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.

Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.
HEROIC INTERVENTION
1CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.

TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.

EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.

RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Embark
If a unit makes a Normal, Advance or Fall Back move, and every model in that unit ends that move within 3" of a friendly TRANSPORT model, they can embark within it. A unit cannot embark if it has already disembarked from a TRANSPORT model in the same phase. Remove the unit from the battlefield and place it to one side – it is now embarked within that TRANSPORT model. Unless otherwise stated, units cannot do anything or be affected in any way while they are embarked.

  • A unit can embark within a friendly TRANSPORT if all of its models end a Normal, Advance or Fall Back move within 3" of that TRANSPORT.
  • A unit cannot embark and disembark in the same phase.

The HARLEQUINS keyword is used in the following Drukhari datasheets:

Dedicated Transports
SCINTILLATING TEMPO
1CP
Reaper’s Wager – Strategic Ploy Stratagem
Commorrite or Harlequin, these lithe combatants move with stunning speed, darting in and out of firing lines before their foes can raise their weapons.
WHEN: Your Movement phase or your Charge phase, just after a or HARLEQUINS unit from your army is selected to make a Normal, Advance or Fall Back move, is set up on the battlefield, or declares a charge.

TARGET: That unit.

EFFECT: Until the end of the turn, enemy units cannot use the Fire Overwatch Stratagem to shoot at your unit.
SHORTEN THE ODDS
1CP
Reaper’s Wager – Strategic Ploy Stratagem
Having selected their victims, these killers strive to complete the kill with speed and brutality whilst moving ever closer to winning their macabre wager.
WHEN: Your Movement phase, just after a or HARLEQUINS unit from your army has Advanced.

TARGET: That unit.

EFFECT: Until the end of the turn, your unit is eligible to shoot and declare a charge in a turn in which it Advanced.

The HARLEQUINS and INFANTRY keywords are used in the following Drukhari datasheets:

Other
DANCE MACABRE
2CP
Reaper’s Wager – Strategic Ploy Stratagem
The saedath’s victims become unwitting partners in a frantic dance of ghastly slaughter.
WHEN: Your opponent’s Movement phase, just after an enemy unit ends a Normal, Advance or Fall Back move.

TARGET: One INFANTRY or HARLEQUINS INFANTRY unit from your army that is within 9" of that enemy unit.

EFFECT: Your unit can make a Normal move of up to D6". If your unit is currently losing the wager, it can make a Normal move of up to 6" instead.
Lethal Hits

Some weapons can inflict fatal injuries on any foe, no matter their resilience.

Weapons with [LETHAL HITS] in their profile are known as Lethal Hits weapons. Each time an attack is made with such a weapon, a Critical Hit automatically wounds the target.
Sustained Hits

Some weapons strike in a flurry of blows, tearing the foe apart with relentless ferocity.

Weapons with [SUSTAINED HITS X] in their profile are known as Sustained Hits weapons. Each time an attack is made with such a weapon, if a Critical Hit is rolled, that attack scores a number of additional hits on the target as denoted by ‘x’.

Example: A model makes an attack with a melee weapon with the [SUSTAINED HITS 2] ability. If the Hit roll is an unmodified 6 (a Critical Hit), then that attack scores a total of 3 hits on the target (1 from the successful Hit roll of 6, and 2 from the [SUSTAINED HITS 2] ability).

  • [SUSTAINED HITS X]: Each Critical Hit scores ‘x’ additional hits on the target.
MALICIOUS FRENZY
1CP
Reaper’s Wager – Battle Tactic Stratagem
Jealous competition descends into frenzied carnage as the kill count climbs higher and the intoxicating screams of the dying fill the air.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One or HARLEQUINS unit from your army that has not been selected to shoot or fight this phase.

EFFECT: Select [LETHAL HITS] or [SUSTAINED HITS 1]. Until the end of the phase, weapons equipped by models in your unit have the selected ability.
FATEFUL ROLE
1CP
Reaper’s Wager – Strategic Ploy Stratagem
These warriors are so absorbed by their desire to win the wager that they risk death to land their killing blows.
WHEN: Fight phase, just after an enemy unit has selected its targets.

TARGET: One or HARLEQUINS unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, each time a model in your unit is destroyed, if that model has not fought this phase, roll one D6, adding 1 to the result if that unit is losing the wager: on a 4+, do not remove it from play. That destroyed model can fight after the attacking model’s unit has finished making its attacks, and is then removed from play.
MURDERER’S CIRCUS
1CP
Reaper’s Wager – Battle Tactic Stratagem
In bounding leaps and graceful pirouettes, the cavalcade of capricious killers bounds through hails of fire, cackling gleefully as they come.
WHEN: Fight phase, just after an enemy unit has selected its targets.

TARGET: One or HARLEQUINS unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, each time an attack targets your unit, subtract 1 from the Hit roll.
Callous Competition
Reaper’s Wager Detachment

In this saedath, the Harlequins embody the Reaper, whilst their Drukhari companions are mortal killers.

At the start of the battle, units from your army are winning the wager.

Each time a unit from your army destroys an enemy unit, units from your army are winning the wager.

Each time a HARLEQUINS unit from your army destroys an enemy unit, HARLEQUIN units from your army are winning the wager.

While units from your army are winning the wager, HARLEQUIN units from your army are losing the wager, and vice versa.

Each time a or HARLEQUINS model from your army makes an attack, if that model’s unit is losing the wager, re-roll a Hit roll of 1 and re-roll a Wound roll of 1.

HARLEQUINS
You can include HARLEQUINS units in your army (see Index: Aeldari). The combined points cost of such units depends on your battle size:
  • Incursion: Up to 500 pts
  • Strike Force: Up to 1000 pts
  • Onslaught: Up to 1500 pts

No HARLEQUINS models from your army can be your WARLORD.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Attached Units
Some CHARACTER units have the Leader ability, which lets them merge with other units (known as Bodyguard units) to form an Attached unit.

The Starting Strength of an Attached unit is equal to the combined Starting Strengths of all of its units (i.e. the number of models in the Leader unit added to the number of models in the Bodyguard unit). If either the Leader unit or the Bodyguard unit in an Attached unit is destroyed, the Starting Strength of the remaining unit is changed to be equal to its original Starting Strength.

Example: A Primaris Captain (Starting Strength 1) is attached to a unit of Intercessors (Starting Strength 5). This Attached unit has a Starting Strength of 6. If all the Intercessors are destroyed, the remaining Primaris Captain would revert to having a Starting Strength of 1.

For the purposes of rules that are triggered when a unit is destroyed, such rules are still triggered when one of the individual units that made up an Attached unit is destroyed (the Leader or the Bodyguard unit).

Example: If a rule awards you with 1VP each time an enemy unit is destroyed, and you target an Attached unit, you would gain 1VP if the Bodyguard unit is destroyed and 1VP if the Leader unit is destroyed (for a total of 2VP).
SCOUTS

Scouts form the vanguard of many armies. Unnoticed by the enemy, they range ahead of the main force.

Some units have ‘Scouts x"’ listed in their abilities. If every model in a unit has this ability, then at the start of the first battle round, before the first turn begins, it can make a Normal move of up to x", with the exception that, while making that move, the distance moved by each model in that unit can be greater than that model's Move characteristic, as long as it is not greater than x".

DEDICATED TRANSPORT models can make use of any Scouts x" ability listed in their abilities, or a Scouts x" ability that a unit that starts the battle embarked within that DEDICATED TRANSPORT model has (provided only models with this ability are embarked within that DEDICATED TRANSPORT model), regardless of how that embarked unit gained this ability (e.g. listed in their abilities, conferred by an Enhancement or by an attached CHARACTER, etc.).

A unit that moves using this ability must end that move more than 9" horizontally away from all enemy models. If both players have units that can do this, the player who is taking the first turn moves their units first.

Example: A unit has the Scouts 6" ability. At the start of the first battle round, the controlling player can make a Normal move with that unit of up to 6".

  • Scouts x": Unit can make a Normal move of up to x" before the first turn begins.
  • If embarked in a DEDICATED TRANSPORT, that DEDICATED TRANSPORT can make this move instead.
  • Must end this move more than 9" horizontally away from all enemy models.
Assault

Assault weapons fire so indiscriminately that they can be shot from the hip as warriors dash forward.

Weapons with [ASSAULT] in their profile are known as Assault weapons. If a unit that Advanced this turn contains any models equipped with Assault weapons, it is still eligible to shoot in this turn’s Shooting phase. When such a unit is selected to shoot, you can only resolve attacks using Assault weapons its models are equipped with.

  • Can be shot even if the bearer’s unit Advanced.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while %000015069performing actions%.

The CHARACTER keyword is used in the following Drukhari datasheets:

LEADER

Mighty heroes fight at the forefront of battle.

Some CHARACTER units have ‘Leader’ listed on their datasheets. Such CHARACTER units are known as Leaders, and the units they can lead – known as their Bodyguard units – are listed on their datasheet.

During the Declare Battle Formations step, for each Leader in your army, if your army also includes one or more of that Leader’s Bodyguard units, you can select one of those Bodyguard units. That Leader will then attach to that Bodyguard unit for the duration of the battle and is said to be leading that unit. Each Bodyguard unit can only have one Leader attached to it.

While a Bodyguard unit contains a Leader, it is known as an Attached unit and, with the exception of rules that are triggered when units are destroyed, it is treated as a single unit for all rules purposes. Each time an attack targets an Attached unit, until the attacking unit has resolved all of its attacks, you must use the Toughness characteristic of the Bodyguard models in that unit, even if a Leader in that unit has a different Toughness characteristic. Each time an attack sucessfully wounds an Attached unit, that attack cannot be allocated to a CHARACTER model in that unit, even if that CHARACTER model has lost one or more wounds or has already had attacks allocated to it this phase. As soon as the last Bodyguard model in an Attached unit has been destroyed, any attacks made against that unit that have yet to be allocated can then be allocated to CHARACTER models in that unit.

Each time the last model in a Bodyguard unit is destroyed, each CHARACTER unit that is part of that Attached unit is no longer part of an Attached unit. It becomes a separate unit, with its original Starting Strength. If this happens as the result of an attack, they become separate units after the attacking unit has resolved all of its attacks.

Each time the last model in a CHARACTER unit that is attached to a Bodyguard unit is destroyed and there is not another CHARACTER unit attached, that Attached unit’s Bodyguard unit is no longer part of an Attached unit. It becomes a separate unit, with its original Starting Strength. If this happens as the result of an attack, they become separate units after the attacking unit has resolved all of its attacks.

Each time a unit that is part of an Attached unit is destroyed, it does not have the keywords of any other units that make up that Attached unit (unless it has those keywords on its own datasheet) for the purposes of any rules that would be triggered when that unit is destroyed.

Example: If you only destroy the Bodyguard unit that is part of an Attached unit, you have not destroyed a CHARACTER unit. If you only destroy the CHARACTER unit that is part of an Attached unit, or if you destroy the whole Attached unit, you have destroyed one CHARACTER unit.

  • Before the battle, CHARACTER units with the Leader ability can be attached to one of their Bodyguard units to form an Attached unit.
  • Attached units can only contain one Leader.
  • Attacks cannot be allocated to CHARACTER models in Attached units.
BATTLEFIELD COMMAND
1CP
Boarding Actions – Strategic Ploy Stratagem
The commander's authoritative tone cuts through the din of battle, guiding the actions of nearby troops.
WHEN: Start or end of any phase.

TARGET: One Leader unit from your army and one friendly Bodyguard unit within 6" of it that it could normally be attached to.

EFFECT: Select one of your Leader unit’s Leader abilities. Until the start of your next Command phase, that Bodyguard unit is treated as being led by that Leader unit for the purposes of that Leader ability.

RESTRICTIONS: Once you target a unit with this Stratagem, that unit cannot be targeted with it again until your next Command phase.
EPIC CHALLENGE
1CP
Core – Epic Deed Stratagem
The legends of the 41st Millennium are replete with deadly duels between mighty champions.
WHEN: Fight phase, when a CHARACTER unit from your army that is within Engagement Range of one or more Attached units is selected to fight.

TARGET: One CHARACTER model in your unit.

EFFECT: Until the end of the phase, all melee attacks made by that model have the [PRECISION] ability.

The DEDICATED TRANSPORT keyword is used in the following Drukhari datasheets:

Dedicated Transports
  • Archraider
    15 pts
Reaper’s Wager Detachment

A veteran of countless realspace raids or vehicular saedaths, this warrior champion utilises the speed of their sleek anti-grav craft to surprise their enemies.

HARLEQUINS or model only. In the Declare Battle Formations step, if the bearer starts the battle embarked within a DEDICATED TRANSPORT, that DEDICATED TRANSPORT has the Scouts 9" ability.

  • Webway Walker
    15 pts
Reaper’s Wager Detachment

This elite combatant possesses intricate knowledge of the Webway’s hidden paths and employs them to enhance this dreadful performance.

HARLEQUINS or model only. Models in the bearer’s unit have the Deep Strike ability. Each time the bearer’s unit is set up on the battlefield using the Deep Strike ability, if that unit is currently losing the wager, until the end of the turn, you can re-roll Charge rolls made for that unit.

STEALTH

Some warriors are masters of disguise and concealment.

If every model in a unit has this ability, then each time a ranged attack is made against it, subtract 1 from that attack’s Hit roll.
Melta

Melta weapons are powerful heat rays whose fury is magnified at close range.

Weapons with [MELTA X] in their profile are known as Melta weapons. Each time an attack made with such a weapon targets a unit within half that weapon’s range, that attack’s Damage characteristic is increased by the amount denoted by ‘x’.

Example: A model targets a unit that is within half range of a weapon with a Damage characteristic of D6 and the [MELTA 2] ability. If that attack inflicts damage on the target, it inflicts D6+2 damage.

  • [MELTA X]: Increase the Damage by ‘x’ when targeting units within half range.
GRENADE
1CP
Core – Wargear Stratagem
Priming their hand-held projectiles, these warriors draw back and hurl death into the enemy’s midst.
WHEN: Your Shooting phase.

TARGET: One GRENADES unit from your army (excluding units that Advanced, Fell Back or have shot this turn) that is not within Engagement Range of one or more enemy units.

EFFECT: Select one GRENADES model in your unit and one enemy unit that is not within Engagement Range of any units from your army and is within 8" of and visible to your GRENADES model. Roll six D6: for each 4+, that enemy unit suffers 1 mortal wound.

The GRENADES keyword is used in the following Drukhari datasheets:

6. Select Warlord
Select one CHARACTER model from your army to be your Warlord – this will be the leader of your army – and make a note of this on your Army Roster. Your Warlord gains the WARLORD keyword.
INFILTRATORS

Many armies employ reconnaissance units who can sit concealed, waiting for the right moment to strike.

During deployment, if every model in a unit has this ability, then when you set it up, it can be set up anywhere on the battlefield that is more than 9" horizontally away from the enemy deployment zone and all enemy models.
Strands of Fate

The Aeldari live on the brink of extinction. As such, their Farseers have become adept at reading future events, seeing the many strands of fate ahead of their people and the consequences of following each one. Taken at the right time, a simple action can avoid calamitous outcomes, aiding the Aeldari in their continued struggle for survival.

If your Army Faction is AELDARI, at the start of the battle, make a Strands of Fate roll by rolling six D6.

If you wish, you can then re-roll all of these dice, but if you do, roll one less D6. You can continue re-rolling all of the dice in this manner, rolling one less D6 each time you do, until you are satisfied with the results rolled (or until you only have a single D6 remaining).

When you are satisfied with the results rolled, those remaining dice become your Fate dice for the battle. These results cannot be changed or re-rolled further, unless a rule specifically states otherwise. Keep your Fate dice to one side – this is your Fate dice pool.

Once per phase, before making a dice roll for a model or unit from your army with the Strands of Fate ability, if you have one or more dice in your Fate dice pool, you can use one of those Fate dice. To do so, select one of those Fate dice to substitute that dice roll. The dice that is being substituted is not rolled; instead, the value of the selected Fate dice is used as if it had been rolled (this counts as an unmodified dice roll of that value for all rules purposes). Each Fate dice can only be used in this way once. After using a Fate dice, remove it from your Fate dice pool and roll all remaining dice that are part of that dice roll (if any). You can use Fate dice for any of the following types of dice roll:

The HARLEQUINS keyword is used in the following Drukhari datasheets:

Dedicated Transports
  • Reaper’s Cowl
    25 pts
Reaper’s Wager Detachment

This ebon cloak contains a shadow field generator, which shrouds the bearer in a field of umbral darkness.

HARLEQUINS model only. Models in the bearer’s unit have the Stealth and Infiltrators abilities.

© Vyacheslav Maltsev 2013-2024