Aeldari – Skathach Wraithknight
RANGED WEAPONS | RANGE | A | BS | S | AP | D | |
| Deathshroud cannon – dispersed [blast, devastating wounds] | |||||||
| Deathshroud cannon – dispersed [blast, devastating wounds] | 12" | 3D6 | 3+ | 6 | -1 | 1 | |
| Deathshroud cannon – focused [blast, devastating wounds] | |||||||
| Deathshroud cannon – focused [blast, devastating wounds] | 48" | D6 | 3+ | 10 | -3 | 2 | |
| Inferno lance [melta 2] | |||||||
| Inferno lance [melta 2] | 24" | 4 | 3+ | 12 | -4 | D6 | |
| Scatter laser | |||||||
| Scatter laser | 36" | 6 | 3+ | 5 | 0 | 1 | |
| Shuriken cannon [sustained hits 1] | |||||||
| Shuriken cannon [sustained hits 1] | 24" | 3 | 3+ | 6 | -1 | 2 | |
| Starcannon | |||||||
| Starcannon | 36" | 2 | 3+ | 8 | -3 | 2 | |
MELEE WEAPONS | RANGE | A | WS | S | AP | D | |
| Titanic feet | |||||||
| Titanic feet | Melee | 5 | 3+ | 8 | -1 | 2 | |
WARGEAR OPTIONS
- This model can be equipped with up to two of the following:
- 1 scatter laser
- 1 shuriken cannon
- 1 starcannon
- This model’s inferno lance can be replaced with 1 deathshroud cannon.
- This model’s scattershield can be replaced with one of the following:
- 1 inferno lance
- 1 deathshroud cannon
ABILITIES
CORE: Deadly Demise D6, Deep Strike
FACTION: Strands of Fate
Agile: Each time this model makes a Normal, Advance or Fall Back move, it can move over other models (excluding TITANIC models) and terrain features that are 4" or less in height as if they were not there.Webway Shunt Generator: Once per battle, at the end of your opponent’s turn, if this model is not within Engagement Range of one or more enemy units, you can remove this model from the battlefield and place it into Strategic Reserves.
WARGEAR ABILITIES
Scattershield: The bearer has a 4+ invulnerable save.
UNIT COMPOSITION
- 1 Skathach Wraithknight
| 1 model | 490 |
DAMAGED: 1-6 WOUNDS REMAINING
While this model has 1-6 wounds remaining, subtract 5 from this model’s Objective Control characteristic and each time this model makes an attack, subtract 1 from the Hit roll.
KEYWORDS: MONSTER, TITANIC, TOWERING, WALKER, WRAITH CONSTRUCT, SKATHACH WRAITHKNIGHT
FACTION KEYWORDS:
STRATAGEMS
FEIGNED RETREAT
1CP
Battle Host – Strategic Ploy
MATCHLESS AGILITY
1CP
Battle Host – Battle Tactic
BLADESTORM
1CP
Battle Host – Strategic Ploy
FIRE AND FADE
2CP
Battle Host – Strategic Ploy
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
DETACHMENT ABILITY
Unparalleled Foresight
Strands of Fate
The Aeldari live on the brink of extinction. As such, their Farseers have become adept at reading future events, seeing the many strands of fate ahead of their people and the consequences of following each one. Taken at the right time, a simple action can avoid calamitous outcomes, aiding the Aeldari in their continued struggle for survival.
If your Army Faction is , at the start of the battle, make a Strands of Fate roll by rolling six D6.If you wish, you can then re-roll all of these dice, but if you do, roll one less D6. You can continue re-rolling all of the dice in this manner, rolling one less D6 each time you do, until you are satisfied with the results rolled (or until you only have a single D6 remaining).
When you are satisfied with the results rolled, those remaining dice become your Fate dice for the battle. These results cannot be changed or re-rolled further, unless a rule specifically states otherwise. Keep your Fate dice to one side – this is your Fate dice pool.
Once per phase, before making a dice roll for a model or unit from your army with the Strands of Fate ability, if you have one or more dice in your Fate dice pool, you can use one of those Fate dice. To do so, select one of those Fate dice to substitute that dice roll. The dice that is being substituted is not rolled; instead, the value of the selected Fate dice is used as if it had been rolled (this counts as an unmodified dice roll of that value for all rules purposes). Each Fate dice can only be used in this way once. After using a Fate dice, remove it from your Fate dice pool and roll all remaining dice that are part of that dice roll (if any). You can use Fate dice for any of the following types of dice roll:
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.
- Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
- Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
- Critical Hit: Unmodified Hit roll of 6. Always successful.
- An unmodified Hit roll of 1 always fails.
- A Hit roll can never be modified by more than -1 or +1.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Sustained Hits
Some weapons strike in a flurry of blows, tearing the foe apart with relentless ferocity.
Weapons with [SUSTAINED HITS X] in their profile are known as Sustained Hits weapons. Each time an attack is made with such a weapon, if a Critical Hit is rolled, that attack scores a number of additional hits on the target as denoted by ‘x’.Example: A model makes an attack with a melee weapon with the [SUSTAINED HITS 2] ability. If the Hit roll is an unmodified 6 (a Critical Hit), then that attack scores a total of 3 hits on the target (1 from the successful Hit roll of 6, and 2 from the [SUSTAINED HITS 2] ability).
- [SUSTAINED HITS X]: Each Critical Hit scores ‘x’ additional hits on the target.
The keyword is used in the following Aeldari datasheets:
Characters
Fortifications
Other
and others...
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.
A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
- Fall Back Move: Models move up to M".
- Units that Fall Back cannot shoot or declare a charge in the same turn.
- Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
- If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
- Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
FEIGNED RETREAT
1CP
Battle Host – Strategic Ploy Stratagem
The Aeldari are forever elusive, and their actions are unpredictable and deceptive. What appears to be a full retreat one moment is revealed as the prelude to a devastating attack the next.
WHEN: Your Movement phase, just after an unit from your army makes a Fall Back move.
TARGET: That unit.
EFFECT: Your unit is eligible to shoot and declare a charge this turn even though it Fell Back.
TARGET: That unit.
EFFECT: Your unit is eligible to shoot and declare a charge this turn even though it Fell Back.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.- Advance Move: Models move up to M+D6".
- Cannot move within Engagement Range of any enemy models.
- Units that Advance cannot shoot or charge this turn.
MATCHLESS AGILITY
1CP
Battle Host – Battle Tactic Stratagem
Grace in battle and merciless efficiency are prized virtues in craftworld armies. Like the shimmering blades of Khaine, the Asuryani carve through the ranks of their enemies.
WHEN: Your Movement phase.
TARGET: One unit from your army that has not been selected to move this phase.
EFFECT: Until the end of the phase, if your unit Advances, do not make an Advance roll for it. Instead, until the end of the phase, add 6" to the Move characteristic of models in your unit.
TARGET: One unit from your army that has not been selected to move this phase.
EFFECT: Until the end of the phase, if your unit Advances, do not make an Advance roll for it. Instead, until the end of the phase, add 6" to the Move characteristic of models in your unit.
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.
| ||||||||||||||
If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.
An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.
- Critical Wound: Unmodified Wound roll of 6. Always successful.
- An unmodified Wound roll of 1 always fails.
- A Wound roll can never be modified by more than -1 or +1.
BLADESTORM
1CP
Battle Host – Strategic Ploy Stratagem
The well-trained Aeldari are able to lay down a hail of fire from their weapons, their superior reflexes allowing them to track even the most sudden movement and place every shot perfectly.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Until the end of the phase, each time a model in your unit makes an attack, on a Critical Wound, improve the Armour Penetration characteristic of that attack by 2.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Until the end of the phase, each time a model in your unit makes an attack, on a Critical Wound, improve the Armour Penetration characteristic of that attack by 2.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Embark
If a unit makes a Normal, Advance or Fall Back move, and every model in that unit ends that move within 3" of a friendly TRANSPORT model, they can embark within it. A unit cannot embark if it has already disembarked from a TRANSPORT model in the same phase. Remove the unit from the battlefield and place it to one side – it is now embarked within that TRANSPORT model. Unless otherwise stated, units cannot do anything or be affected in any way while they are embarked.- A unit can embark within a friendly TRANSPORT if all of its models end a Normal, Advance or Fall Back move within 3" of that TRANSPORT.
- A unit cannot embark and disembark in the same phase.
The TRANSPORT keyword is used in the following Aeldari datasheets:
The AIRCRAFT keyword is used in the following Aeldari datasheets:
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.
- Engagement Range: Within 1" horizontally and 5" vertically.
- Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
FIRE AND FADE
2CP
Battle Host – Strategic Ploy Stratagem
The Aeldari are masters of hit-and-run tactics, engaging a target with a flurry of shots before quickly manoeuvring into cover or out of sight.
WHEN: End of your Shooting phase.
TARGET: One unit from your army.
EFFECT: Your unit can make a Normal move. It cannot embark within a TRANSPORT at the end of this move.
RESTRICTIONS: You cannot select an AIRCRAFT unit or a unit within Engagement Range of one or more enemy units, and until the end of the turn, the unit you selected is not eligible to declare a charge.
TARGET: One unit from your army.
EFFECT: Your unit can make a Normal move. It cannot embark within a TRANSPORT at the end of this move.
RESTRICTIONS: You cannot select an AIRCRAFT unit or a unit within Engagement Range of one or more enemy units, and until the end of the turn, the unit you selected is not eligible to declare a charge.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.
An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.
- Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
- An unmodified saving throw of 1 always fails.
- A saving throw can never be improved by more than +1.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
- Within Engagement Range of every unit that you selected as a target of the charge.
- Without moving within Engagement Range of any enemy units that were not a target of the charge.
- In Unit Coherency.
- Charge Roll: 2D6".
- Targets of a charge must be within 12" but do not need to be visible.
- If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
- Cannot move within Engagement Range of any unit that was not a target of the charge.
- If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Hazardous
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.
Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):- If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
- Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
- Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.
Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.
- After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.While a unit is Battle-shocked:
- The Objective Control characteristic of all of its models is 0.
- If it Falls Back, you must take a Desperate Escape test for every model in that unit.
- Its controlling player cannot use Stratagems to affect that unit.
Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.
In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.
- Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
- Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
- Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
- Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
Blast
High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.
Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.
- Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
- Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.
- Unmodified Dice: the result after re-rolls, but before any modifiers.
- A dice can never be re-rolled more than once.
- You must re-roll all dice if several need adding together (e.g. 2D6).
- Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.
TARGET: That unit from your army.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
TARGET: That unit from your army.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.
FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance, Fall Back or Charge move.
TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.
EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.
RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.
EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.
RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE
Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.
During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.- Unit can be set up in Reserves instead of on the battlefield.
- Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.
- A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Mortal Wounds
Some attacks are so powerful that no armour or force field can withstand their fury.
Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.
If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.
If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.
- Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
- Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
Charge Bonus
Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.
Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.HEROIC INTERVENTION
1CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.
TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.
EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.
RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.
EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.
RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
Unparalleled Foresight
Battle Host Detachment
When the Aeldari take to the battlefield, any who oppose them are left confounded by their grace, elegance and martial skill. Where lesser beings would falter, the Aeldari move with a surety of purpose that can only be perceived as preordained.
Each time an unit from your army is selected to shoot or fight, you can re-roll one Hit roll and you can re-roll one Wound roll when resolving those attacks.Army List
Datasheets collatedCharacters
Dedicated Transports
Fortifications
Other
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
Disembark
If a unit from your army starts your Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase.When a unit disembarks from a TRANSPORT model, set it up on the battlefield so that it is wholly within 3" of that TRANSPORT model and not within Engagement Range of any enemy models. If, for any reason, a disembarking model cannot be set up, that model’s unit cannot disembark.
Units that disembark from a TRANSPORT model that either Remained Stationary this phase or has not yet made a Normal, Advance or Fall Back move this phase can then act normally (make a Normal move, Advance, shoot, declare a charge, fight, etc.) in the remainder of the turn. Such a disembarking unit cannot choose to Remain Stationary.
Units that disembark from a TRANSPORT model that made a Normal move this phase count as having made a Normal move themselves; they cannot move further during this phase. Such a unit also cannot declare a charge in the same turn, but can otherwise act normally in the remainder of the turn.
Units cannot disembark from a TRANSPORT model that either Advanced or Fell Back this turn.
- Units that start your Movement phase embarked within a TRANSPORT can disembark this phase, provided their TRANSPORT has not Advanced or Fallen Back.
- If a unit disembarks before its TRANSPORT moves, it can act normally.
- If a unit disembarks after its TRANSPORT moves, it cannot move or charge this turn, but can otherwise act normally.
- Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models (or the unit cannot disembark).
- Units that disembark this turn cannot Remain Stationary.
DEADLY DEMISE
From detonating ammo stores to corrosive innards or frenzied death throes, some targets are deadly even in defeat.
Some models have ‘Deadly Demise x’ listed in their abilities. When such a model is destroyed, roll one D6 before removing it from play (if such a model is a TRANSPORT, roll before any embarked models disembark). On a 6, each unit within 6" of that model suffers a number of mortal wounds denoted by ‘x’ (if this is a random number, roll separately for each unit within 6").Example: A TRANSPORT model with the Deadly Demise D3 ability is destroyed. Before any models disembark and before removing it from play, its controlling player rolls one D6, getting a 6. There are three units within 6" of that destroyed model, so its controlling player rolls one D3 for each of them, inflicting mortal wounds accordingly.
- Deadly Demise x: When this model is destroyed, roll one D6. On a 6, each unit within 6" suffers ‘x’ mortal wounds.
The TITANIC keyword is used in the following Aeldari datasheets:
Invulnerable Saves
Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.
Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.
- Invulnerable Save: Never modified by an attack’s AP.
- The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Melta
Melta weapons are powerful heat rays whose fury is magnified at close range.
Weapons with [MELTA X] in their profile are known as Melta weapons. Each time an attack made with such a weapon targets a unit within half that weapon’s range, that attack’s Damage characteristic is increased by the amount denoted by ‘x’.Example: A model targets a unit that is within half range of a weapon with a Damage characteristic of D6 and the [MELTA 2] ability. If that attack inflicts damage on the target, it inflicts D6+2 damage.
- [MELTA X]: Increase the Damage by ‘x’ when targeting units within half range.
The MONSTER keyword is used in the following Aeldari datasheets:
The TOWERING keyword is used in the following Aeldari datasheets:
The WALKER keyword is used in the following Aeldari datasheets:
The WRAITH CONSTRUCT keyword is used in the following Aeldari datasheets: