Orks – Flash Gitz
RANGED WEAPONS | RANGE | A | BS | S | AP | D | |
| Snazzgun [heavy, sustained hits 1] | |||||||
| Snazzgun [heavy, sustained hits 1] | 24" | 3 | 5+ | 6 | -1 | 2 | |
MELEE WEAPONS | RANGE | A | WS | S | AP | D | |
| Choppa | |||||||
| Choppa | Melee | 4 | 3+ | 5 | -1 | 1 | |
WARGEAR OPTIONS
- This unit can be equipped with 1 ammo runt.
ABILITIES
FACTION: Waaagh!
Gun-crazy Show-offs: Each time a model in this unit targets the closest eligible target with its snazzgun, until the end of the phase, that weapon has an Attacks characteristic of 4.
WARGEAR ABILITIES
Ammo Runt: Once per battle, when this unit is selected to shoot, it can use this ability. If it does, until the end of the phase, ranged weapons equipped by models in this unit have the [LETHAL HITS] ability.
Designer’s Note: Place an Ammo Runt token next to the unit, removing it after this ability has been used.
Designer’s Note: Place an Ammo Runt token next to the unit, removing it after this ability has been used.
UNIT COMPOSITION
- 1 Kaptin
- 4-9 Flash Gitz
| 5 models | 95 |
| 10 models | 190 |
KEYWORDS: INFANTRY, GRENADES, FLASH GITZ
FACTION KEYWORDS:
ORKS
ORKS
STRATAGEMS
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GRENADE
1CP
Core – Wargear
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
2CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
ERE WE GO
1CP
Waaagh! Tribe – Battle Tactic
’ARD AS NAILS
1CP
Waaagh! Tribe – Battle Tactic
ORKS IS NEVER BEATEN
2CP
Waaagh! Tribe – Epic Deed
UNBRIDLED CARNAGE
1CP
Waaagh! Tribe – Battle Tactic
Waaagh!
The infamous war cry of the Orks is known and feared throughout the galaxy. When it echoes across the battlefield, bellowed from hundreds or even thousands of greenskin mouths, even the most stalwart warriors fear the onslaught to come.
If your Army Faction is ORKS, once per battle, at the start of the battle round, you can call a Waaagh! If you do, until the start of the next battle round:- ORKS units from your army are eligible to declare a charge in a turn in which they Advanced.
- Add 1 to the Strength and Attacks characteristics of melee weapons equipped by ORKS models from your army.
- ORKS models from your army have a 5+ invulnerable save.
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.
| ||||||||||||||
If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.
An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.
- Critical Wound: Unmodified Wound roll of 6. Always successful.
- An unmodified Wound roll of 1 always fails.
- A Wound roll can never be modified by more than -1 or +1.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Hazardous
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.
Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, if one or more models attack with Hazardous weapons, then after that unit has resolved all of its attacks, you must take one Hazardous test for each Hazardous weapon that was just used by rolling one D6. For each roll of 1, that test is failed and one model in that unit equipped with a Hazardous weapon is destroyed (selected by the controlling player), unless that model is a CHARACTER, MONSTER or VEHICLE, in which case it suffers 3 mortal wounds instead. Note that if you selected a CHARACTER model in an Attached unit, the mortal wounds suffered must be allocated to that model first, even if there is another model in that unit that has lost one or more wounds or has had attacks allocated to it this phase.Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and as no models in the unit are CHARACTERS, MONSTERS or VEHICLES, one of those models is destroyed.
- After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, one model equipped with a Hazardous weapon is destroyed (CHARACTERS, MONSTERS and VEHICLES suffer 3 mortal wounds instead).
The ORKS keyword is used in the following Orks datasheets:
Characters
Dedicated Transports
Other
and others...
The INFANTRY keyword is used in the following Orks datasheets:
Characters
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.- Advance Move: Models move up to M+D6".
- Cannot move within Engagement Range of any enemy models.
- Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
- Within Engagement Range of every unit that you selected as a target of the charge.
- Without moving within Engagement Range of any enemy units that were not a target of the charge.
- In Unit Coherency.
- Charge Roll: 2D6".
- Targets of a charge must be within 12" but do not need to be visible.
- If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
- Cannot move within Engagement Range of any unit that was not a target of the charge.
- If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.
A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
- Fall Back Move: Models move up to M".
- Units that Fall Back cannot shoot or declare a charge in the same turn.
- Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
- If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
- Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.
- Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
- Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
- Critical Hit: Unmodified Hit roll of 6. Always successful.
- An unmodified Hit roll of 1 always fails.
- A Hit roll can never be modified by more than -1 or +1.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.
An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.
- Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
- An unmodified saving throw of 1 always fails.
- A saving throw can never be improved by more than +1.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.
- Unmodified Dice: the result after re-rolls, but before any modifiers.
- A dice can never be re-rolled more than once.
- You must re-roll all dice if several need adding together (e.g. 2D6).
- Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit.
TARGET: That unit from your army.
EFFECT: You re-roll that roll, test or saving throw.
TARGET: That unit from your army.
EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.While a unit is Battle-shocked:
- The Objective Control characteristic of all of its models is 0.
- If it Falls Back, you must take a Desperate Escape test for every model in that unit.
- Its controlling player cannot use Stratagems to affect that unit.
Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.
- Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
- Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
- Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
- Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.
TARGET: A unit from your army that must take a Battle-shock test.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
TARGET: A unit from your army that must take a Battle-shock test.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.
FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance, Fall Back or Charge move.
TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.
EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.
RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.
EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.
RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE
Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.
During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models.- Unit can be set up in Reserves instead of on the battlefield.
- Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Invulnerable Saves
Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.
Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.
- Invulnerable Save: Never modified by an attack’s AP.
- The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Benefit of Cover
Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.
Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.
- Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
- Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
- Multiple instances are not cumulative.
GO TO GROUND
1CP
Core – Battle Tactic Stratagem
Seeking salvation from incoming fire, warriors hurl themselves into whatever cover they can find.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
Charge Bonus
Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.
Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.HEROIC INTERVENTION
2CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.
TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.
EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.
RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.
EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.
RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.
- Engagement Range: Within 1" horizontally and 5" vertically.
- Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
The ORKS and INFANTRY keywords are used in the following Orks datasheets:
Characters
ERE WE GO
1CP
Waaagh! Tribe – Battle Tactic Stratagem
’Even lumbering Orks can put on a surprising turn of speed when the promise of a good face-to-face fight is in the offing. Once a horde of Orks get a sight of the foe, nothing can stop them.
WHEN: Start of your Movement phase.
TARGET: One ORKS INFANTRY unit from your army.
EFFECT: Until the end of the turn, add 2 to Advance and Charge rolls made for your unit.
TARGET: One ORKS INFANTRY unit from your army.
EFFECT: Until the end of the turn, add 2 to Advance and Charge rolls made for your unit.
The VEHICLE keyword is used in the following Orks datasheets:
Dedicated Transports
Other
The GRETCHIN keyword is used in the following Orks datasheets:
Other
’ARD AS NAILS
1CP
Waaagh! Tribe – Battle Tactic Stratagem
Even the lowliest Ork Boy can take a tremendous amount of punishment before being slain.
WHEN: Your opponent’s Shooting phase or the Fight phase, just after an enemy unit has selected its targets.
TARGET: One ORKS unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, each time an attack targets your unit, subtract 1 from the Wound roll.
RESTRICTIONS: You cannot select a VEHICLE or GRETCHIN unit for this Stratagem.
TARGET: One ORKS unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, each time an attack targets your unit, subtract 1 from the Wound roll.
RESTRICTIONS: You cannot select a VEHICLE or GRETCHIN unit for this Stratagem.
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
ORKS IS NEVER BEATEN
2CP
Waaagh! Tribe – Epic Deed Stratagem
So resilient is Ork physiology – and so slow are Orks on the uptake – that even killing wounds can take a while to register.
WHEN: Fight phase, just after an enemy unit has selected its targets.
TARGET: One ORKS unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, each time a model in your unit is destroyed, if that model has not fought this phase, do not remove it from play. The destroyed model can fight after the attacking model’s unit has finished making attacks, and is then removed from play.
TARGET: One ORKS unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, each time a model in your unit is destroyed, if that model has not fought this phase, do not remove it from play. The destroyed model can fight after the attacking model’s unit has finished making attacks, and is then removed from play.
UNBRIDLED CARNAGE
1CP
Waaagh! Tribe – Battle Tactic Stratagem
When Orks get stuck into the foe, the carnage is wonderful to behold, at least for other Orks.
WHEN: Fight phase.
TARGET: One ORKS unit from your army that has not been selected to fight this phase.
EFFECT: Until the end of the phase, each time an ORKS model in your unit makes a melee attack, an unmodified hit roll of 5+ scores a Critical Hit.
TARGET: One ORKS unit from your army that has not been selected to fight this phase.
EFFECT: Until the end of the phase, each time an ORKS model in your unit makes a melee attack, an unmodified hit roll of 5+ scores a Critical Hit.
Get Stuck In
Waaagh! Tribe Detachment
Once an Ork gets stuck into hand-to-hand combat, they quickly overwhelm their enemies through sheer ferocity
Melee weapons equipped by ORKS models from your army have the [SUSTAINED HITS 1] ability.Army List
Datasheets collatedCharacters
Battleline
Dedicated Transports
Fortifications
Other
Mortal Wounds
Some attacks are so powerful that no armour or force field can withstand their fury.
Some attacks inflict mortal wounds. Each mortal wound inflicts one point of damage on the target unit, and they are always applied one at a time. Do not make a Wound roll or saving throw (including invulnerable saving throws) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit as described below.Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.
If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.
- Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
Lethal Hits
Some weapons can inflict fatal injuries on any foe, no matter their resilience.
Weapons with [LETHAL HITS] in their profile are known as Lethal Hits weapons. Each time an attack is made with such a weapon, a Critical Hit automatically wounds the target.The GRENADES keyword is used in the following Orks datasheets:
Characters
Battleline
GRENADE
1CP
Core – Wargear Stratagem
Priming their hand-held projectiles, these warriors draw back and hurl death into the enemy’s midst.
WHEN: Your Shooting phase.
TARGET: One GRENADES unit from your army that is not within Engagement Range of any enemy units and has not been selected to shoot this phase.
EFFECT: Select one enemy unit that is not within Engagement Range of any units from your army and is within 8" of and visible to your GRENADES unit. Roll six D6: for each 4+, that enemy unit suffers 1 mortal wound.
TARGET: One GRENADES unit from your army that is not within Engagement Range of any enemy units and has not been selected to shoot this phase.
EFFECT: Select one enemy unit that is not within Engagement Range of any units from your army and is within 8" of and visible to your GRENADES unit. Roll six D6: for each 4+, that enemy unit suffers 1 mortal wound.
Sustained Hits
Some weapons strike in a flurry of blows, tearing the foe apart with relentless ferocity.
Weapons with [SUSTAINED HITS X] in their profile are known as Sustained Hits weapons. Each time an attack is made with such a weapon, if a Critical Hit is rolled, that attack scores a number of additional hits on the target as denoted by ‘x’.Example: A model makes an attack with a melee weapon with the [SUSTAINED HITS 2] ability. If the Hit roll is an unmodified 6 (a Critical Hit), then that attack scores a total of 3 hits on the target (1 from the successful Hit roll of 6, and 2 from the [SUSTAINED HITS 2] ability).
- [SUSTAINED HITS X]: Each Critical Hit scores ‘x’ additional hits on the target.
Heavy
Heavy weapons are amongst the biggest guns on the battlefield, but require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
Weapons with [HEAVY] in their profile are known as Heavy weapons. Each time an attack is made with such a weapon, if the attacking model’s unit Remained Stationary this turn, add 1 to that attack’s Hit roll.- Add 1 to Hit rolls if the bearer’s unit Remained Stationary this turn.
