Datasheets
Army List
Datasheets collated
 
 
AuthorCommunityData Export
 
Settings
The Rules
Quick Start GuideCore RulesCrusade RulesRules Commentary

Matched Mission Packs
LeviathanPariah Nexus Battles

Crusade Mission Packs
Tyrannic WarPariah Nexus

Boarding Actions
Boarding Action Rules

Others
Bunker
Factions
Imperium
Adepta SororitasAdeptus CustodesAdeptus MechanicusAdeptus TitanicusAstra MilitarumGrey KnightsImperial AgentsImperial KnightsSpace Marines
Chaos
Chaos DaemonsChaos KnightsChaos Space MarinesDeath GuardThousand SonsWorld Eaters
Xenos
AeldariDrukhariGenestealer CultsLeagues of VotannNecronsOrksT’au EmpireTyranids
Unaligned
Unaligned Forces

Imperial Agents – Damned Legionnaires
[  ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
Damned Legionnaires
(⌀25mm)
M
6"
T
4
Sv
3+
W
2
Ld
6+
OC
1
INVULNERABLE SAVE
4+
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Bolt pistol [ignores cover, pistol]
Bolt pistol [ignores cover, pistol]
12"
1
3+
4
0
1
Boltgun [ignores cover]
Boltgun [ignores cover]
24"
2
3+
4
0
1
Flamer [ignores cover, torrent]
Flamer [ignores cover, torrent]
12"
D6
N/A
4
0
1
Heavy flamer [ignores cover, torrent]
Heavy flamer [ignores cover, torrent]
12"
D6
N/A
5
-1
1
Meltagun [melta 2]
Meltagun [melta 2]
12"
1
3+
9
-4
D6
Multi-melta [heavy, melta 2]
Multi-melta [heavy, melta 2]
18"
2
4+
9
-4
D6
Plasma gun – standard [rapid fire 1]
Plasma gun – standard [rapid fire 1]
24"
1
3+
7
-2
1
Plasma gun – supercharge [hazardous, rapid fire 1]
Plasma gun – supercharge [hazardous, rapid fire 1]
24"
1
3+
8
-3
2
Plasma pistol – standard [pistol]
Plasma pistol – standard [pistol]
12"
1
3+
7
-2
1
Plasma pistol – supercharge [hazardous, pistol]
Plasma pistol – supercharge [hazardous, pistol]
12"
1
3+
8
-3
2
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Astartes chainsword
Astartes chainsword
Melee
5
3+
4
-1
1
Close combat weapon
Close combat weapon
Melee
3
3+
4
0
1
Power weapon
Power weapon
Melee
3
3+
5
-2
1
WARGEAR OPTIONS
  • The Legionnaire Sergeant’s boltgun can be replaced with one of the following:
    • 1 bolt pistol and 1 power weapon
    • 1 plasma pistol and 1 power weapon
    • 1 bolt pistol and 1 Astartes chainsword
    • 1 plasma pistol and 1 Astartes chainsword
  • One Legionnaire’s boltgun can be replaced with one of the following:
    • 1 Heavy flamer
    • 1 Multi-melta
  • One Legionnaire’s boltgun can be replaced with one of the following:
    • 1 Flamer
    • 1 Meltagun
    • 1 Plasma gun

ABILITIES
CORE: Deep Strike
FACTION: Assigned Agents
Grim Spectres: In your Shooting phase, after this unit has shot, select one enemy unit hit by one or more of those attacks. That enemy unit must take a Battle-shock test, subtracting 1 from the result when doing so.
UNIT COMPOSITION
  • 1 Legionnaire Sergeant
  • 4-9 Legionnaires
Every model is equipped with: boltgun; close combat weapon.
5 models
90
10 models
180
KEYWORDS: INFANTRY, GRENADES, IMPERIUM, RETINUE, DAMNED LEGIONNAIRES
FACTION KEYWORDS:
AGENTS OF THE IMPERIUM
STRATAGEMS
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GRENADE
1CP
Core – Wargear
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
EMPEROR’S WILL
1CP
Imperialis Fleet – Strategic Ploy
VIOLENT ACQUISITION
2CP
Imperialis Fleet – Strategic Ploy
EXACT PUNISHMENT
1CP
Purgation Force – Strategic Ploy
PRIME TARGET
1CP
Veiled Blade Elimination Force – Battle Tactic
WILL‑SAPPING SALVO
1CP
Veiled Blade Elimination Force – Strategic Ploy
ORBITAL OVERSIGHT
1CP
Veiled Blade Elimination Force – Strategic Ploy
BLIND GRENADES
1CP
Veiled Blade Elimination Force – Strategic Ploy
ENSNARING TRAP
1CP
Veiled Blade Elimination Force – Strategic Ploy
DETACHMENT ABILITY
At all Costs
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
LEADER

Mighty heroes fight at the forefront of battle.

Some CHARACTER units have ‘Leader’ listed on their datasheets. Such CHARACTER units are known as Leaders, and the units they can lead – known as their Bodyguard units – are listed on their datasheet.

During the Declare Battle Formations step, for each Leader in your army, if your army also includes one or more of that Leader’s Bodyguard units, you can select one of those Bodyguard units. That Leader will then attach to that Bodyguard unit for the duration of the battle and is said to be leading that unit. Each Bodyguard unit can only have one Leader attached to it.

While a Bodyguard unit contains a Leader, it is known as an Attached unit and, with the exception of rules that are triggered when units are destroyed, it is treated as a single unit for all rules purposes. Each time an attack targets an Attached unit, until the attacking unit has resolved all of its attacks, you must use the Toughness characteristic of the Bodyguard models in that unit, even if a Leader in that unit has a different Toughness characteristic. Each time an attack sucessfully wounds an Attached unit, that attack cannot be allocated to a CHARACTER model in that unit, even if that CHARACTER model has lost one or more wounds or has already had attacks allocated to it this phase. As soon as the last Bodyguard model in an Attached unit has been destroyed, any attacks made against that unit that have yet to be allocated can then be allocated to CHARACTER models in that unit.

Each time the last model in a Bodyguard unit is destroyed, each CHARACTER unit that is part of that Attached unit is no longer part of an Attached unit. It becomes a separate unit, with its original Starting Strength. If this happens as the result of an attack, they become separate units after the attacking unit has resolved all of its attacks.

Each time the last model in a CHARACTER unit that is attached to a Bodyguard unit is destroyed and there is not another CHARACTER unit attached, that Attached unit’s Bodyguard unit is no longer part of an Attached unit. It becomes a separate unit, with its original Starting Strength. If this happens as the result of an attack, they become separate units after the attacking unit has resolved all of its attacks.

Each time a unit that is part of an Attached unit is destroyed, it does not have the keywords of any other units that make up that Attached unit (unless it has those keywords on its own datasheet) for the purposes of any rules that would be triggered when that unit is destroyed.

Example: If you only destroy the Bodyguard unit that is part of an Attached unit, you have not destroyed a CHARACTER unit. If you only destroy the CHARACTER unit that is part of an Attached unit, or if you destroy the whole Attached unit, you have destroyed one CHARACTER unit.

  • Before the battle, CHARACTER units with the Leader ability can be attached to one of their Bodyguard units to form an Attached unit.
  • Attached units can only contain one Leader.
  • Attacks cannot be allocated to CHARACTER models in Attached units.
LONE OPERATIVE

Assassins and other covert agents are difficult to track and pinpoint in the swirling maelstrom of battle.

Unless part of an Attached unit (see Leader), this unit can only be selected as the target of a ranged attack if the attacking model is within 12".
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.

  • Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
  • Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
  • Critical Hit: Unmodified Hit roll of 6. Always successful.
  • An unmodified Hit roll of 1 always fails.
  • A Hit roll can never be modified by more than -1 or +1.

The DEDICATED TRANSPORT keyword is used in the following Imperial Agents datasheets:

The RETINUE keyword is used in the following Imperial Agents datasheets:

The CHARACTER keyword is used in the following Imperial Agents datasheets:

The REQUISITIONED keyword is used in the following Imperial Agents datasheets:

Assigned Agents

Throughout the Imperium there exist numerous martial organisations and shadowy institutions. Bodies of armed warriors or solitary agents from these groups possess specialist skills, unusual equipment and vested interests that lead them to be attached to larger Imperial armies. Some are requisitioned by the army’s commander for their particular abilities, others are assigned by their hidden masters to achieve singular agendas. The most powerful have the authority and reputation to enforce their presence on the field of battle.

If your Army Faction is , then in the Select Detachment Rules step, you can select one of the available Detachments from this book as normal.

If your Army Faction is not , but every model in your army has the IMPERIUM keyword, you can include units in your army even if they do not have the Faction keyword you selected in the Select Army Faction step. In this case, the maximum number of units you can include in your army depends on the battle size, as shown below.

BATTLE SIZERETINUE UNITSCHARACTER UNITSREQUISITIONED UNITS
Incursion111
Strike Force221
Onslaught332

Note that you can include DEDICATED TRANSPORT units in such an army as normal, but each unit must start the battle with one or more units embarked within it, or it cannot be deployed for that battle and will count as having been destroyed during the first battle round.
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.

WOUND ROLL
ATTACK’S STRENGTH VS TARGET’S TOUGHNESSD6 RESULT REQUIRED
Strength is TWICE (or more than twice) the Toughness.
+
Strength is GREATER than the Toughness.
+
Strength is EQUAL to the Toughness.
+
Strength is LESS than the Toughness.
+
Strength is HALF (or less than half) the Toughness.
+

If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.

  • Critical Wound: Unmodified Wound roll of 6. Always successful.
  • An unmodified Wound roll of 1 always fails.
  • A Wound roll can never be modified by more than -1 or +1.

The OFFICIO ASSASSINORUM keyword is used in the following Imperial Agents datasheets:

Before selecting targets for this weapon, select one of its profiles to make attacks with.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.

Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.

  • A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Ignores Cover

Some weapons are designed to root enemy formations out of entrenched positions.

Weapons with [IGNORES COVER] in their profile are known as Ignores Cover weapons. Each time an attack is made with such a weapon, the target cannot have the Benefit of Cover against that attack.
Pistol

Pistols can be wielded even at point-blank range.

Weapons with [PISTOL] in their profile are known as Pistols. If a unit contains any models equipped with Pistols, that unit is eligible to shoot in its controlling player’s Shooting phase even while it is within Engagement Range of one or more enemy units. When such a unit is selected to shoot, it can only resolve attacks using its Pistols and can only target one of the enemy units it is within Engagement Range of. In such circumstances, a Pistol can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

If a model is equipped with one or more Pistols, unless it is a MONSTER or VEHICLE model, it can either shoot with its Pistols or with all of its other ranged weapons. Declare whether such a model will shoot with its Pistols or its other ranged weapons before selecting targets.

  • Can be shot even if the bearer’s unit is within Engagement Range of enemy units, but must target one of those enemy units.
  • Cannot be shot alongside any other non-Pistol weapon (except by a MONSTER or VEHICLE).
Heavy

Heavy weapons are amongst the biggest guns on the battlefield, but require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.

Weapons with [HEAVY] in their profile are known as Heavy weapons. Each time an attack is made with such a weapon, if the attacking model’s unit Remained Stationary this turn, add 1 to that attack’s Hit roll.

  • Add 1 to Hit rolls if the bearer’s unit Remained Stationary this turn.

The keyword is used in the following Imperial Agents datasheets:

The INFANTRY keyword is used in the following Imperial Agents datasheets:

The IMPERIUM keyword is used in the following Imperial Agents datasheets:

Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.

If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.

An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.

  • Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
  • An unmodified saving throw of 1 always fails.
  • A saving throw can never be improved by more than +1.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.

  • Advance Move: Models move up to M+D6".
  • Cannot move within Engagement Range of any enemy models.
  • Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.

You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
  • Within Engagement Range of every unit that you selected as a target of the charge.
  • Without moving within Engagement Range of any enemy units that were not a target of the charge.
  • In Unit Coherency.
If any of these conditions cannot be met, the charge fails and no models in the charging unit move this phase. Otherwise, the charge is successful and the models in the charging unit make a Charge move – move each model a distance in inches up to the result of the Charge roll. When doing so, each model in the charging unit must end its Charge move closer to one of the units selected as a target of its charge. If you can also move a charging model so that it ends its Charge move in base-to-base contact with one or more enemy models while still enabling the charging unit to end its move satisfying all of the conditions above, you must do so. The controlling player chooses the order in which to move their models.

  • Charge Roll: 2D6".
  • Targets of a charge must be within 12" but do not need to be visible.
  • If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
  • Cannot move within Engagement Range of any unit that was not a target of the charge.
  • If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.

A unit cannot shoot or declare a charge in the same turn that it Fell Back.

Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.

Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.

  • Fall Back Move: Models move up to M".
  • Units that Fall Back cannot shoot or declare a charge in the same turn.
  • Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
  • If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
  • Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
Hazardous

Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.

Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):
  • If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
  • Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
  • Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a model was selected, that unit suffers 3 mortal wounds and when allocating those mortal wounds, they must be allocated to the selected model.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.

Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.

  • After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.

While a unit is Battle-shocked:

Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.

In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.

  • Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
  • Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
  • Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
  • Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.

TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).

EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
Blast

High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.

Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).

Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.

  • Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
  • Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase.

EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.

Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.

  • Engagement Range: Within 1" horizontally and 5" vertically.
  • Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.

You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.

  • Unmodified Dice: the result after re-rolls, but before any modifiers.
  • A dice can never be re-rolled more than once.
  • You must re-roll all dice if several need adding together (e.g. 2D6).
  • Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.

TARGET: That unit from your army.

EFFECT: Your unit automatically passes that Battle-shock test.

RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.

FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance or Fall Back move, or declares a charge.

TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.

EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.

RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE

Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.

During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.
  • Unit can be set up in Reserves instead of on the battlefield.
  • Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.

TARGET: One unit from your army that is in Reserves.

EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).

RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Invulnerable Saves

Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.

Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.

Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.

  • Invulnerable Save: Never modified by an attack’s AP.
  • The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Benefit of Cover

Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.

Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.

Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.

  • Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
  • Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
  • Multiple instances are not cumulative.
GO TO GROUND
1CP
Core – Battle Tactic Stratagem
Seeking salvation from incoming fire, warriors hurl themselves into whatever cover they can find.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
Charge Bonus

Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.

Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.
HEROIC INTERVENTION
1CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.

TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.

EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.

RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
EMPEROR’S WILL
1CP
Imperialis Fleet – Strategic Ploy Stratagem
Believing theyfightforthe safety of the Golden Throne motivates warriors to exceptional deeds.
WHEN: Your Movement phase.

TARGET: One unit from your army.

EFFECT: Until the end of the phase, your unit is eligible to shoot in a turn in which it Advanced or Fell Back.
Objective Markers
Objective markers represent objects of tactical or strategic import that both sides are attempting to secure, such as valuable artefacts, vital supplies or communications nodes. If a mission uses objective markers, it will state where they are located on the battlefield. These can be represented using any suitable marker, but we recommend using round markers that are 40mm in diameter.

When setting objective markers up on the battlefield, place them so they are centred on the point specified by the mission. When measuring distances to and from objective markers, measure to and from the closest part of them. Models can move over objective markers as if they were not there, but they cannot end a move on top of an objective marker.

At the start of the battle, each objective marker on the battlefield is said to be contested, and so is not controlled by either player. To control an objective marker, a player will first need to move models within range of it. A model is within range of an objective marker if it is within 3" horizontally and 5" vertically of that objective marker.

Every model has an Objective Control (OC) characteristic listed on its datasheet. To determine a player’s Level of Control over an objective marker, add together the OC characteristics of all the models from that player’s army that are within range of that objective marker. A player will control an objective marker at the end of any phase or turn if their Level of Control over it is greater than their opponent’s. If both players have the same Level of Control over an objective marker, that objective marker is contested.

  • A model is within range of an objective marker if within 3" horizontally and 5" vertically.
  • Level of Control: Add together the OC characteristics of all of a player’s models within range of the objective marker.
  • An objective marker is controlled by the player with the highest Level of Control over it (in a tie, it is contested).
  • Models cannot end a move on top of an objective marker.
Sustained Hits

Some weapons strike in a flurry of blows, tearing the foe apart with relentless ferocity.

Weapons with [SUSTAINED HITS X] in their profile are known as Sustained Hits weapons. Each time an attack is made with such a weapon, if a Critical Hit is rolled, that attack scores a number of additional hits on the target as denoted by ‘x’.

Example: A model makes an attack with a melee weapon with the [SUSTAINED HITS 2] ability. If the Hit roll is an unmodified 6 (a Critical Hit), then that attack scores a total of 3 hits on the target (1 from the successful Hit roll of 6, and 2 from the [SUSTAINED HITS 2] ability).

  • [SUSTAINED HITS X]: Each Critical Hit scores ‘x’ additional hits on the target.
Lance

Lance weapons are deadly on the charge.

Weapons with [LANCE] in their profile are known as Lance weapons. Each time an attack is made with such a weapon, if the bearer made a Charge move this turn, add 1 to that attack’s Wound roll.
VIOLENT ACQUISITION
2CP
Imperialis Fleet – Strategic Ploy Stratagem
If a high-ranking Imperial agent locates something they wish to acquire, nothing will stop them from unleashing all the forces at their command to seize it.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One unit from your army.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack that targets an enemy unit within range of an objective marker, that attack has the [SUSTAINED HITS 1], [LANCE] and [IGNORES COVER] abilities.

The ADEPTUS ARBITES keyword is used in the following Imperial Agents datasheets:

Battleline
Vigilant Squad

The ORDO HERETICUS keyword is used in the following Imperial Agents datasheets:

Dedicated Transports
Sisters of Battle Immolator
EXACT PUNISHMENT
1CP
Purgation Force – Strategic Ploy Stratagem
Vengeance is swift and unforgiving for those who attack the servants of the Emperor.
WHEN: Your opponent’s Shooting phase, just after an unit from your army is destroyed as the result of an enemy unit's attacks.

TARGET: One ADEPTUS ARBITES, INQUISITORIAL AGENTS or ORDO HERETICUS unit from your army that was within 6" of the destroyed unit (you cannot target the destroyed unit with the Stratagem).

EFFECT: After the attacking unit has shot, your unit can shoot as if it were your Shooting phase, but when resolving those attacks it can only target that enemy unit (and only if it is an eligible target).
Mortal Wounds

Some attacks are so powerful that no armour or force field can withstand their fury.

Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.

If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.

If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.

  • Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
  • Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
PRIME TARGET
1CP
Veiled Blade Elimination Force – Battle Tactic Stratagem
A primary target has been revealed. All efforts must be made to ensure the kill.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One unit from your army that has not been selected to shoot or fight this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack that targets a CHARACTER unit, re-roll a Wound roll of 1. If that attack is made by an OFFICIO ASSASSINORUM model and it targets the enemy WARLORD, you can re-roll the Wound roll instead.
WILL‑SAPPING SALVO
1CP
Veiled Blade Elimination Force – Strategic Ploy Stratagem
Aiming concentrated volleys of fire toward an exceptionally resilient foe, these agents erode the will of their target, increasing their vulnerability to the concentrated psychic onslaughts of the Culexus Assassin’s animus speculum.
WHEN: Your Shooting phase.

TARGET: One INFANTRY unit from your army that has not been selected to shoot this phase.

EFFECT: Until the end of the phase, ranged weapons equipped by models in your unit have the [SUSTAINED HITS 1] ability. In addition, if it is a CULEXUS ASSASSIN unit, until the end of the phase, change the Damage characteristic of ranged weapons equipped by models in your unit to 3.
ORBITAL OVERSIGHT
1CP
Veiled Blade Elimination Force – Strategic Ploy Stratagem
Aided by orbiting assets, when the assault begins, voidships flood communication networks with jamming frequencies, fire screening bombardments and otherwise mask the agents’ approach.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, your unit can only be selected as the target of a ranged attack if the attacking model is within 18", or, if your unit has the Lone Operative ability, if the attacking model is within 6".

The and GRENADES keywords are used in the following Imperial Agents datasheets:

BLIND GRENADES
1CP
Veiled Blade Elimination Force – Strategic Ploy Stratagem
These grenades release thick black smoke and broad-spectrum electromagnetic chaff that disrupt vision and foul augury equipment upon detonating.
WHEN: Your opponent’s Charge phase, just after an enemy unit has declared a charge.

TARGET: One GRENADES or VINDICARE ASSASSIN unit from your army that was selected as one of the targets of that charge and is not within Engagement Range of one or more enemy units.

EFFECT: Until the end of the phase, subtract 1 from Charge rolls made for that enemy unit, or, if your unit is a VINDICARE ASSASSIN, subtract 2 from Charge rolls made for that enemy unit instead.
ENSNARING TRAP
1CP
Veiled Blade Elimination Force – Strategic Ploy Stratagem
The eyes of the Officio Assassinorum are everywhere. As the foe turns to flee, the noose tightens, agents already forewarned of enemy movements and moving swiftly to cut off all avenues of retreat.
WHEN: End of your opponent’s Charge phase.

TARGET: One INFANTRY unit from your army that is within 6" of one or more enemy units and would be eligible to declare a charge against one or more of those enemy units.

EFFECT: Your unit can declare a charge. When doing so, you must select one or more of those enemy units as the targets of that charge, and your unit does not receive a Charge bonus this turn. In addition, if it is a CALLIDUS ASSASSIN unit and it makes a Charge move as a result of this Stratagem, until the end of the turn, each time a model in your unit makes a melee attack, add 1 to the Wound roll.
At all Costs
Imperialis Fleet Detachment

While the nature of the missions undertaken by Imperial agents is as varied as they are, the vital importance of these tasks rarely changes. The enemies they face are the most unholy. The prizes they seek are as priceless as they are nightmarishly dangerous. Thus, when such warriors of the Imperium identify a priority target for elimination or acquisition, no effort is too great nor price too high to see their aims achieved.

At the start of your Command phase, you can select one of the following to apply:

Eliminate At All Costs

Select one enemy unit on the battlefield. Until the start of your next Command phase, each time an model from your army makes an attack that targets that enemy unit, add 1 to the Hit roll.

Acquire At All Costs

Select one objective marker on the battlefield. Until the start of your next Command phase, while an unit from your army is within range of that objective marker, improve the Leadership and Objective Control characteristics of models in that unit by 1 and models in that unit have a 5+ invulnerable save.

Army List
Datasheets collated
Faction Rules
Introduction
Army Rules
Ordo Xenos Alien Hunters
Ordo Hereticus Purgation Force
Ordo Malleus Daemon Hunters
Imperialis Fleet
Crusade Rules
Shadow Operations
Voidship’s Company
Interdiction Team
Veiled Blade Elimination Force
Boarding Actions

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Torrent

Torrent weapons shoot clouds of fire, gas or other lethal substances that few foes can hope to evade.

Weapons with [TORRENT] in their profile are known as Torrent weapons. Each time an attack is made with such a weapon, that attack automatically hits the target.

The GRENADES keyword is used in the following Imperial Agents datasheets:

GRENADE
1CP
Core – Wargear Stratagem
Priming their hand-held projectiles, these warriors draw back and hurl death into the enemy’s midst.
WHEN: Your Shooting phase.

TARGET: One GRENADES unit from your army (excluding units that Advanced, Fell Back or have shot this turn) that is not within Engagement Range of one or more enemy units.

EFFECT: Select one GRENADES model in your unit and one enemy unit that is not within Engagement Range of any units from your army and is within 8" of and visible to your GRENADES model. Roll six D6: for each 4+, that enemy unit suffers 1 mortal wound.
Rapid Fire

Rapid fire weapons are capable of long-ranged precision shots or controlled bursts at nearby targets.

Weapons with [RAPID FIRE X] in their profile are known as Rapid Fire weapons. Each time such a weapon targets a unit within half that weapon’s range, the Attacks characteristic of that weapon is increased by the amount denoted by ‘x’.

Example: A model targets a unit that is within half range of a weapon with an Attacks characteristic of 1 and the [RAPID FIRE 1] ability. That weapon therefore makes two attacks at the target, and you make two Hit rolls.

  • [RAPID FIRE X]: Increase the Attacks by ‘x’ when targeting units within half range.

The RETINUE keyword is used in the following Imperial Agents datasheets:

Melta

Melta weapons are powerful heat rays whose fury is magnified at close range.

Weapons with [MELTA X] in their profile are known as Melta weapons. Each time an attack made with such a weapon targets a unit within half that weapon’s range, that attack’s Damage characteristic is increased by the amount denoted by ‘x’.

Example: A model targets a unit that is within half range of a weapon with a Damage characteristic of D6 and the [MELTA 2] ability. If that attack inflicts damage on the target, it inflicts D6+2 damage.

  • [MELTA X]: Increase the Damage by ‘x’ when targeting units within half range.
© Vyacheslav Maltsev 2013-2024