Adeptus Mechanicus – Secutarii Peltasts
RANGED WEAPONS | RANGE | A | BS | S | AP | D | |
| Archeotech pistol [devastating wounds, pistol] | |||||||
| Archeotech pistol [devastating wounds, pistol] | 12" | 1 | 4+ | 6 | -1 | 1 | |
| Galvanic caster – flechette [assault] | |||||||
| Galvanic caster – flechette [assault] | 18" | 5 | 4+ | 4 | 0 | 1 | |
| Galvanic caster – hammershot [heavy] | |||||||
| Galvanic caster – hammershot [heavy] | 24" | 2 | 4+ | 5 | -1 | 1 | |
MELEE WEAPONS | RANGE | A | WS | S | AP | D | |
| Alpha close combat weapon | |||||||
| Alpha close combat weapon | Melee | 2 | 4+ | 5 | -1 | 1 | |
| Close combat weapon | |||||||
| Close combat weapon | Melee | 1 | 4+ | 3 | 0 | 1 | |
WARGEAR OPTIONS
- The Peltast Alpha’s arc lance can be replaced with 1 Archeotech pistol.
- The Peltast Alpha can be equipped with 1 Alpha close combat weapon.
- 1 Secutarii Peltast can be equipped with one of the following:
- 1 enhanced data-tether
- 1 omnispex
ABILITIES
FACTION: Doctrina Imperatives
Blind Barrage: In your Shooting phase, after this unit has shot, select one enemy INFANTRY unit hit by one or more of those attacks. Until the start of your next turn, while this unit is on the battlefield, that enemy unit is blinded. While a unit is blinded, each time a model in that unit makes an attack, subtract 1 from the Hit roll.
WARGEAR ABILITIES
Enhanced data-tether: Each time you select the bearer’s unit as the target of a Stratagem, roll one D6: on a 5+, you gain 1CP
Omnispex: Ranged weapons equipped by models in the bearer’s unit have the [IGNORES COVER] ability.
UNIT COMPOSITION
- 1 Peltast Alpha
- 4-9 Secutarii Peltasts
| 5 models | 50 |
| 10 models | 100 |
SECUTARII
If a model from your army with the Leader ability can be attached to a SKITARII VANGUARD unit, it can be attached to this unit instead.
KEYWORDS: INFANTRY, IMPERIUM, SKITARII, SECUTARII PELTASTS
FACTION KEYWORDS:
STRATAGEMS
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
CACHED ACQUISITION
1CP
Explorator Maniple – Epic Deed
INCENSE EXHAUSTS
1CP
Explorator Maniple – Wargear
REACTIVE SAFEGUARD
1CP
Explorator Maniple – Strategic Ploy
PRIORITY RECLAMATION
1CP
Explorator Maniple – Battle Tactic
AGGRESSOR IMPERATIVE
1CP
Rad-Zone Corps – Battle Tactic
LETHAL DOSAGE
1CP
Rad-Zone Corps – Wargear
PRE-CALIBRATED PURGE SOLUTION
1CP
Rad-Zone Corps – Battle Tactic
BULWARK IMPERATIVE
2CP
Rad-Zone Corps – Battle Tactic
BALEFUL HALO
2CP
Rad-Zone Corps – Battle Tactic
BINHARIC OFFENCE
2CP
Skitarii Hunter Cohort – Strategic Ploy
SHROUD PROTOCOLS
1CP
Skitarii Hunter Cohort – Strategic Ploy
EXPEDITED PURGE PROTOCOL
1CP
Skitarii Hunter Cohort – Strategic Ploy
PROGRAMMED WITHDRAWAL
1CP
Skitarii Hunter Cohort – Strategic Ploy
DETACHMENT ABILITY
Rad-bombardment
Stealth Optimisation
Acquisition At Any Cost
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
LEADER
Mighty heroes fight at the forefront of battle.
Some CHARACTER units have ‘Leader’ listed on their datasheets. Such CHARACTER units are known as Leaders, and the units they can lead – known as their Bodyguard units – are listed on their datasheet.During the Declare Battle Formations step, for each Leader in your army, if your army also includes one or more of that Leader’s Bodyguard units, you can select one of those Bodyguard units. That Leader will then attach to that Bodyguard unit for the duration of the battle and is said to be leading that unit. Each Bodyguard unit can only have one Leader attached to it.
While a Bodyguard unit contains a Leader, it is known as an Attached unit and, with the exception of rules that are triggered when units are destroyed, it is treated as a single unit for all rules purposes. Each time an attack targets an Attached unit, until the attacking unit has resolved all of its attacks, you must use the Toughness characteristic of the Bodyguard models in that unit, even if a Leader in that unit has a different Toughness characteristic. Each time an attack sucessfully wounds an Attached unit, that attack cannot be allocated to a CHARACTER model in that unit, even if that CHARACTER model has lost one or more wounds or has already had attacks allocated to it this phase. As soon as the last Bodyguard model in an Attached unit has been destroyed, any attacks made against that unit that have yet to be allocated can then be allocated to CHARACTER models in that unit.
Each time the last model in a Bodyguard unit is destroyed, each CHARACTER unit that is part of that Attached unit is no longer part of an Attached unit. It becomes a separate unit, with its original Starting Strength. If this happens as the result of an attack, they become separate units after the attacking unit has resolved all of its attacks.
Each time the last model in a CHARACTER unit that is attached to a Bodyguard unit is destroyed and there is not another CHARACTER unit attached, that Attached unit’s Bodyguard unit is no longer part of an Attached unit. It becomes a separate unit, with its original Starting Strength. If this happens as the result of an attack, they become separate units after the attacking unit has resolved all of its attacks.
Each time a unit that is part of an Attached unit is destroyed, it does not have the keywords of any other units that make up that Attached unit (unless it has those keywords on its own datasheet) for the purposes of any rules that would be triggered when that unit is destroyed.
Example: If you only destroy the Bodyguard unit that is part of an Attached unit, you have not destroyed a CHARACTER unit. If you only destroy the CHARACTER unit that is part of an Attached unit, or if you destroy the whole Attached unit, you have destroyed one CHARACTER unit.
- Before the battle, CHARACTER units with the Leader ability can be attached to one of their Bodyguard units to form an Attached unit.
- Attached units can only contain one Leader.
- Attacks cannot be allocated to CHARACTER models in Attached units.
Heavy
Heavy weapons are amongst the biggest guns on the battlefield, but require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
Weapons with [HEAVY] in their profile are known as Heavy weapons. Each time an attack is made with such a weapon, if the attacking model’s unit Remained Stationary this turn, add 1 to that attack’s Hit roll.- Add 1 to Hit rolls if the bearer’s unit Remained Stationary this turn.
The BATTLELINE keyword is used in the following Adeptus Mechanicus datasheets:
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.
- Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
- Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
- Critical Hit: Unmodified Hit roll of 6. Always successful.
- An unmodified Hit roll of 1 always fails.
- A Hit roll can never be modified by more than -1 or +1.
Assault
Assault weapons fire so indiscriminately that they can be shot from the hip as warriors dash forward.
Weapons with [ASSAULT] in their profile are known as Assault weapons. If a unit that Advanced this turn contains any models equipped with Assault weapons, it is still eligible to shoot in this turn’s Shooting phase. When such a unit is selected to shoot, you can only resolve attacks using Assault weapons its models are equipped with.- Can be shot even if the bearer’s unit Advanced.
Doctrina Imperatives
An Adeptus Mechanicus army marching to war is a sight both terrifying and glorious, each holy warrior a disturbing fusion of Human and machine. While the ruling Tech-Priests and their fanatical followers raise modified voices in praise of the Machine God, their Skitarii soldiery and Servitor creations are controlled by doctrina imperatives loaded by their masters to augment and adapt the warriors’ abilities.
At the start of the battle round, you can select one of the Doctrina Imperatives below. Until the end of the battle round, that Doctrina Imperative is active for your army, and all units from your army that have the Doctrina Imperatives ability gain the relevant abilities shown below.Protector Imperative
|
Conqueror Imperative
|
Lethal Hits
Some weapons can inflict fatal injuries on any foe, no matter their resilience.
Weapons with [LETHAL HITS] in their profile are known as Lethal Hits weapons. Each time an attack is made with such a weapon, a Critical Hit automatically wounds the target.Invulnerable Saves
Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.
Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.
- Invulnerable Save: Never modified by an attack’s AP.
- The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.
- A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
The IMPERIUM keyword is used in the following Adeptus Mechanicus datasheets:
Characters
Other
The INFANTRY keyword is used in the following Adeptus Mechanicus datasheets:
Characters
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.
| ||||||||||||||
If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.
An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.
- Critical Wound: Unmodified Wound roll of 6. Always successful.
- An unmodified Wound roll of 1 always fails.
- A Wound roll can never be modified by more than -1 or +1.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.
An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.
- Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
- An unmodified saving throw of 1 always fails.
- A saving throw can never be improved by more than +1.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.- Advance Move: Models move up to M+D6".
- Cannot move within Engagement Range of any enemy models.
- Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
- Within Engagement Range of every unit that you selected as a target of the charge.
- Without moving within Engagement Range of any enemy units that were not a target of the charge.
- In Unit Coherency.
- Charge Roll: 2D6".
- Targets of a charge must be within 12" but do not need to be visible.
- If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
- Cannot move within Engagement Range of any unit that was not a target of the charge.
- If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.
A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.A unit cannot shoot or declare a charge in the same turn that it Fell Back.
Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.
- Fall Back Move: Models move up to M".
- Units that Fall Back cannot shoot or declare a charge in the same turn.
- Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
- If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
- Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
Hazardous
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.
Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):- If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
- Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
- Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.
Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.
- After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.While a unit is Battle-shocked:
- The Objective Control characteristic of all of its models is 0.
- If it Falls Back, you must take a Desperate Escape test for every model in that unit.
- Its controlling player cannot use Stratagems to affect that unit.
Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.
In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.
- Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
- Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
- Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
- Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
Blast
High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.
Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.
- Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
- Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.
- Engagement Range: Within 1" horizontally and 5" vertically.
- Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.
- Unmodified Dice: the result after re-rolls, but before any modifiers.
- A dice can never be re-rolled more than once.
- You must re-roll all dice if several need adding together (e.g. 2D6).
- Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.
TARGET: That unit from your army.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
TARGET: That unit from your army.
EFFECT: Your unit automatically passes that Battle-shock test.
RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.
FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance, Fall Back or Charge move.
TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.
EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.
RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.
EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.
RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE
Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.
During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.- Unit can be set up in Reserves instead of on the battlefield.
- Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
TARGET: One unit from your army that is in Reserves.
EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).
RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Benefit of Cover
Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.
Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.
- Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
- Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
- Multiple instances are not cumulative.
GO TO GROUND
1CP
Core – Battle Tactic Stratagem
Seeking salvation from incoming fire, warriors hurl themselves into whatever cover they can find.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
Charge Bonus
Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.
Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.HEROIC INTERVENTION
1CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.
TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.
EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.
RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.
EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.
RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
Pistol
Pistols can be wielded even at point-blank range.
Weapons with [PISTOL] in their profile are known as Pistols. If a unit contains any models equipped with Pistols, that unit is eligible to shoot in its controlling player’s Shooting phase even while it is within Engagement Range of one or more enemy units. When such a unit is selected to shoot, it can only resolve attacks using its Pistols and can only target one of the enemy units it is within Engagement Range of. In such circumstances, a Pistol can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.If a model is equipped with one or more Pistols, unless it is a MONSTER or VEHICLE model, it can either shoot with its Pistols or with all of its other ranged weapons. Declare whether such a model will shoot with its Pistols or its other ranged weapons before selecting targets.
- Can be shot even if the bearer’s unit is within Engagement Range of enemy units, but must target one of those enemy units.
- Cannot be shot alongside any other non-Pistol weapon (except by a MONSTER or VEHICLE).
Objective Markers
Objective markers represent objects of tactical or strategic import that both sides are attempting to secure, such as valuable artefacts, vital supplies or communications nodes. If a mission uses objective markers, it will state where they are located on the battlefield. These can be represented using any suitable marker, but we recommend using round markers that are 40mm in diameter.When setting objective markers up on the battlefield, place them so they are centred on the point specified by the mission. When measuring distances to and from objective markers, measure to and from the closest part of them. Models can move over objective markers as if they were not there, but they cannot end a move on top of an objective marker.
At the start of the battle, each objective marker on the battlefield is said to be contested, and so is not controlled by either player. To control an objective marker, a player will first need to move models within range of it. A model is within range of an objective marker if it is within 3" horizontally and 5" vertically of that objective marker.
Every model has an Objective Control (OC) characteristic listed on its datasheet. To determine a player’s Level of Control over an objective marker, add together the OC characteristics of all the models from that player’s army that are within range of that objective marker. A player will control an objective marker at the end of any phase or turn if their Level of Control over it is greater than their opponent’s. If both players have the same Level of Control over an objective marker, that objective marker is contested.
- A model is within range of an objective marker if within 3" horizontally and 5" vertically.
- Level of Control: Add together the OC characteristics of all of a player’s models within range of the objective marker.
- An objective marker is controlled by the player with the highest Level of Control over it (in a tie, it is contested).
- Models cannot end a move on top of an objective marker.
CACHED ACQUISITION
1CP
Explorator Maniple – Epic Deed Stratagem
Death is irrelevant compared to the hallowed duty of securing the Omnissiah's knowledge for future retrieval.
WHEN: Any phase.
TARGET: One unit from your army that was just destroyed while it was within range of an objective marker you controlled. You can use this Stratagem on that unit even though it was just destroyed.
EFFECT: That objective marker remains under your control, even if you have no models within range of it, until your opponent controls it at the start or end of any turn.
TARGET: One unit from your army that was just destroyed while it was within range of an objective marker you controlled. You can use this Stratagem on that unit even though it was just destroyed.
EFFECT: That objective marker remains under your control, even if you have no models within range of it, until your opponent controls it at the start or end of any turn.
The SMOKE keyword is used in the following Adeptus Mechanicus datasheets:
Dedicated Transports
STEALTH
Some warriors are masters of disguise and concealment.
If every model in a unit has this ability, then each time a ranged attack is made against it, subtract 1 from that attack’s Hit roll.INCENSE EXHAUSTS
1CP
Explorator Maniple – Wargear Stratagem
The machine spirits of sanctified war engines can be entreated to release clouds of incense laced with radioactive particles, veiling the faithful from the foe.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One INFANTRY unit
from your army that was selected as the target of one or more of the attacking unit’s attacks, and one friendly SMOKE unit within 6" of it.
EFFECT: Until the end of the phase, both of those units have the Stealth ability and the Benefit of Cover.
TARGET: One INFANTRY unit
from your army that was selected as the target of one or more of the attacking unit’s attacks, and one friendly SMOKE unit within 6" of it.
EFFECT: Until the end of the phase, both of those units have the Stealth ability and the Benefit of Cover.
The TRANSPORT keyword is used in the following Adeptus Mechanicus datasheets:
Embark
If a unit makes a Normal, Advance or Fall Back move, and every model in that unit ends that move within 3" of a friendly TRANSPORT model, they can embark within it. A unit cannot embark if it has already disembarked from a TRANSPORT model in the same phase. Remove the unit from the battlefield and place it to one side – it is now embarked within that TRANSPORT model. Unless otherwise stated, units cannot do anything or be affected in any way while they are embarked.- A unit can embark within a friendly TRANSPORT if all of its models end a Normal, Advance or Fall Back move within 3" of that TRANSPORT.
- A unit cannot embark and disembark in the same phase.
Transport Capacity
All TRANSPORT models have a transport capacity listed on their datasheet. This determines the type and maximum number of friendly models that can embark within them.Units can start the battle embarked within a TRANSPORT model instead of being set up separately – declare which units are embarked within a TRANSPORT model before you set it up.
FIRING DECK
Some transports have firing hatches, ports or platforms from which embarked passengers can shoot.
Some TRANSPORT models have ‘Firing Deck x’ listed in their abilities. Each time such a model is selected to shoot in the Shooting phase, you can select up to ‘x’ models embarked within it whose units have not already shot this phase. Then, for each of those embarked models, you can select one ranged weapon that embarked model is equipped with (excluding weapons with the [ONE SHOT] ability). Until that TRANSPORT model has resolved all of its attacks, it counts as being equipped with all of the weapons you selected in this way, in addition to its other weapons. Until the end of the phase, those selected models’ units are not eligible to shoot.- Firing Deck ‘x’: Each time this TRANSPORT shoots, select one weapon (excluding weapons with the [ONE SHOT] ability) from up to ‘x’ models embarked within it whose units have not shot this phase; this TRANSPORT counts as being equipped with those weapons as well. Until the end of the phase, those selected models’ units are not eligible to shoot.
REACTIVE SAFEGUARD
1CP
Explorator Maniple – Strategic Ploy Stratagem
Holy data must be hoarded at all costs, and thickly armoured war engines offer swift and secure vaults.
WHEN: Your opponent’s Charge phase, just after an enemy unit has declared a charge.
TARGET: One INFANTRY
unit from your army within range of your Acquisition objective marker that was selected as a target of that charge, and one friendly TRANSPORT.
EFFECT: Your unit can embark within that TRANSPORT.
RESTRICTIONS: Every model in your unit must be within 3" of that TRANSPORT and there must be sufficient transport capacity to embark the entire unit.
TARGET: One INFANTRY
unit from your army within range of your Acquisition objective marker that was selected as a target of that charge, and one friendly TRANSPORT.
EFFECT: Your unit can embark within that TRANSPORT.
RESTRICTIONS: Every model in your unit must be within 3" of that TRANSPORT and there must be sufficient transport capacity to embark the entire unit.
Consolidate
After a unit has finished making all of its melee attacks, it Consolidates. Each time a unit Consolidates, you can move each model in that unit that is not already in base-to-base contact with an enemy model up to 3" – this is a Consolidation move. For a Consolidation to be possible, a unit must be able to end these moves within Engagement Range of one or more enemy units and in Unit Coherency. If these conditions cannot be met, then each model in that unit can instead make a Consolidation move towards the closest objective marker, but only if, after doing so, that unit is within range of that objective marker and in Unit Coherency. If these conditions also cannot be met, no models in the unit can make Consolidation moves this phase and that unit’s fight ends.If a unit can end its Consolidation within Engagement Range of one or more enemy units, then each time one of its models makes a Consolidation move, it must end that move closer to the closest enemy model. If it can also end that move in base-to-base contact with one or more enemy models while still satisfying all of the conditions above, it must do so. The controlling player chooses the order in which to move their models.
- Consolidation Move: Up to 3".
- Every model that moves must end closer to the closest enemy model, and in base-to-base contact with an enemy model if possible. The unit must end in Unit Coherency and within Engagement Range of at least one enemy unit if possible.
- If the above is not possible, each model can move towards the closest objective marker, but this must result in the unit being within range of it and in Unit Coherency.
- If the above is also not possible, no models can Consolidate.
PRIORITY RECLAMATION
1CP
Explorator Maniple – Battle Tactic Stratagem
Retrieval of the most sacred and ancient fragments of technology is embedded in loops of alpha-logic.
WHEN: Fight phase, just before an unit from your army Consolidates.
TARGET: That unit.
EFFECT: Until the end of the phase, each time a model in your unit makes a Consolidation move, it can move up to 6" instead of up to 3", provided your unit ends that Consolidation move within range of your Acquisition objective marker.
RESTRICTIONS: You cannot target a unit with this Stratagem if it is within 3" of one or more enemy units.
TARGET: That unit.
EFFECT: Until the end of the phase, each time a model in your unit makes a Consolidation move, it can move up to 6" instead of up to 3", provided your unit ends that Consolidation move within range of your Acquisition objective marker.
RESTRICTIONS: You cannot target a unit with this Stratagem if it is within 3" of one or more enemy units.
LETHAL DOSAGE
1CP
Rad-Zone Corps – Wargear Stratagem
Tri-fold sanctified power cells, fuel canisters and solid slugs have spent a decade in the most irradiated forge temple to certify their lethality.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Until the end of the phase, ranged weapons equipped by models in your unit have the [LETHAL HITS] ability.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Until the end of the phase, ranged weapons equipped by models in your unit have the [LETHAL HITS] ability.
The SKITARII keyword is used in the following Adeptus Mechanicus datasheets:
Dedicated Transports
Other
PRE-CALIBRATED PURGE SOLUTION
1CP
Rad-Zone Corps – Battle Tactic Stratagem
Employing targeting data collated by a swarm of servo-skulls released over the enemy's battle lines, the Machine God’s faithful purge the foe stumbling amidst rad-scourged positions.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the phase, each time a model in one of those units makes a ranged attack, if the target of that attack is within your opponent’s deployment zone, you can re-roll the Hit roll.
TARGET: One unit from your army that has not been selected to shoot this phase. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the phase, each time a model in one of those units makes a ranged attack, if the target of that attack is within your opponent’s deployment zone, you can re-roll the Hit roll.
The VEHICLE keyword is used in the following Adeptus Mechanicus datasheets:
BALEFUL HALO
2CP
Rad-Zone Corps – Battle Tactic Stratagem
By briefly unshielding the most corrosive or irradiated components of their being, the warriors of a Rad-Zone Corps can exhale on isotopic fog, sapping the strength of those not inured to its effects.
WHEN: Fight phase, just after an enemy unit has selected its targets.
TARGET: One unit from your army (excluding VEHICLE units) that was selected as the target of one or more of that enemy unit’s attacks. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the turn, each time an attack is made that targets your unit, subtract 1 from the Wound roll.
TARGET: One unit from your army (excluding VEHICLE units) that was selected as the target of one or more of that enemy unit’s attacks. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the turn, each time an attack is made that targets your unit, subtract 1 from the Wound roll.
Rad-bombardment
Rad-Zone Corps Detachment
Whether as a result of natural phenomena, apocalyptic internecine strife or calamitous accidents, many forge worlds are heavily irradiated. When holy wars of requisition are unleashed, the Tech-Priests think nothing of turning this invisible curse upon their foes, bombarding the battlefield with deadly radiation prior to an assault.
BATTLE ROUND
BOMBARDMENT1
At the start of the first battle round, for each enemy unit within your opponents deployment zone, your opponent must decide whether that unit will take cover or stand firm. You then roll one D6 for each of those enemy units and apply the relevant result below:
- Unit Standing Firm: On a 3+, that unit suffers D3 mortal wounds.
- Unit Taking Cover: Until the end of the battle round, that unit is Battle-shocked and, on a 5+, that unit suffers D3 mortal wounds.
BATTLE ROUND ONWARDS
FALLOUT2
At the start of your Command phase during the second, third, fourth and fifth battle rounds, roll one D6 for each enemy unit within your opponent’s deployment zone. On a 3+, that unit suffers 1 mortal wound and must take a Battle-shock test.
Acquisition At Any Cost
Explorator Maniple Detachment
In their eternal quest for the acquisition of knowledge and technology, Tech-Priests require superhuman efforts from the troops under their command.
At the start of your Command phase, select one objective marker. Until the start of your next Command phase, that objective marker is your Acquisition objective marker. Each time an model from your army makes an attack, if that model’s unit is within range of your Acquisition objective marker, or if the target of that attack is within range of your Acquisition objective marker, re-roll a Wound roll of 1.Army List
Datasheets collatedCharacters
Battleline
Dedicated Transports
Other
Ignores Cover
Some weapons are designed to root enemy formations out of entrenched positions.
Weapons with [IGNORES COVER] in their profile are known as Ignores Cover weapons. Each time an attack is made with such a weapon, the target cannot have the Benefit of Cover against that attack.The SKITARII keyword is used in the following Adeptus Mechanicus datasheets:
Dedicated Transports
Other
AGGRESSOR IMPERATIVE
1CP
Rad-Zone Corps – Battle Tactic Stratagem
The Skitarii feel the press of an invisible hand upon their minds as the Machine God drives them forward. Servos are pushed to their structural limits as fibre bundles fill with the boundless energy of the Motive Force and propel the faithful on an unstoppable crusade.
WHEN: Your Movement phase.
TARGET: One SKITARII unit from your army that has not been selected to move this phase. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the phase, each time one of those units Advances, do not make an Advance roll for it. Instead, until the end of the phase, add 6" to the Move characteristic of models in that unit.
TARGET: One SKITARII unit from your army that has not been selected to move this phase. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the phase, each time one of those units Advances, do not make an Advance roll for it. Instead, until the end of the phase, add 6" to the Move characteristic of models in that unit.
BULWARK IMPERATIVE
2CP
Rad-Zone Corps – Battle Tactic Stratagem
With a pulse of force-loaded wisdom, microactuators lock into bracing positions, reserve power cells are brought online and the Omnissiah's holy crusaders are bestowed with a sensation of sacred invulnerability.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One SKITARII unit from your army that was selected as the target of one or more of the attacking unit’s attacks. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the phase, models in those units from your army have a 4+ invulnerable save.
TARGET: One SKITARII unit from your army that was selected as the target of one or more of the attacking unit’s attacks. If that unit is BATTLELINE, you can also target one friendly SKITARII unit (excluding BATTLELINE units) within 6" of it.
EFFECT: Until the end of the phase, models in those units from your army have a 4+ invulnerable save.
BINHARIC OFFENCE
2CP
Skitarii Hunter Cohort – Strategic Ploy Stratagem
Employing directed binharic entanglement to coordinate their motions, paired squads of Skitarii attack with eerie and lethal synchronicity.
WHEN: The start of your Shooting phase or the start of the Fight phase.
TARGET: Two SKITARII units from your army that have not been selected to shoot or fight this phase, and one enemy unit.
EFFECT: Until the end of the phase, improve the Armour Penetration characteristic of weapons equipped by models in both of your units by 1.
RESTRICTIONS: Until the end of the phase, each time a model in either of your units makes an attack, it can only target that enemy unit (and only if it is an eligible target].
TARGET: Two SKITARII units from your army that have not been selected to shoot or fight this phase, and one enemy unit.
EFFECT: Until the end of the phase, improve the Armour Penetration characteristic of weapons equipped by models in both of your units by 1.
RESTRICTIONS: Until the end of the phase, each time a model in either of your units makes an attack, it can only target that enemy unit (and only if it is an eligible target].
The SICARIAN keyword is used in the following Adeptus Mechanicus datasheets:
The SKITARII and MOUNTED keywords are used in the following Adeptus Mechanicus datasheets:
EXPEDITED PURGE PROTOCOL
1CP
Skitarii Hunter Cohort – Strategic Ploy Stratagem
Binharic imperatives flash through neural architecture, driving augmetic muscle-bundles and auto-actuators into overdrive to propel the Skitarii more swiftly into the fray.
WHEN: Your Charge phase.
TARGET: One SKITARII unit from your army.
EFFECT: Until the end of the phase, your unit is eligible to declare a charge in a turn in which it Advanced.
TARGET: One SKITARII unit from your army.
EFFECT: Until the end of the phase, your unit is eligible to declare a charge in a turn in which it Advanced.
The SKITARII and INFANTRY keywords are used in the following Adeptus Mechanicus datasheets:
PROGRAMMED WITHDRAWAL
1CP
Skitarii Hunter Cohort – Strategic Ploy Stratagem
Taking direct control of their cybernetic soldiers’ manoeuvres, the cohort’s commander sees their withdrawal carried out with such precision that they can be pressed back into service from the most efficacious of attack vectors.
WHEN: End of your opponent’s Fight phase.
TARGET: Up to two SICARIAN units from your army, or one SKITARII INFANTRY or SKITARII MOUNTED unit from your army.
EFFECT: Remove those units from the battlefield and place them into Strategic Reserves.
RESTRICTIONS: Each unit targeted with this Stratagem must be more than 3" away from all enemy units.
TARGET: Up to two SICARIAN units from your army, or one SKITARII INFANTRY or SKITARII MOUNTED unit from your army.
EFFECT: Remove those units from the battlefield and place them into Strategic Reserves.
RESTRICTIONS: Each unit targeted with this Stratagem must be more than 3" away from all enemy units.
Stealth Optimisation
Skitarii Hunter Cohort Detachment
Hunter Cohorts combine a mastery of stealth warfare and cogitational analysis with stealth screen projectors and target-fouling apparatuses. They are elusive foes to face, and especially sinister to those they have designated as prey.
SKITARII INFANTRY, SKITARII MOUNTED and IRONSTRIDER BALLISTARII units from your army have the Stealth ability, and each time a ranged attack targets a SICARIAN unit from your army, unless the attacking model is within 12", the target has the Benefit of Cover against that attack.SHROUD PROTOCOLS
1CP
Skitarii Hunter Cohort – Strategic Ploy Stratagem
When Skitarii Hunter Cohorts march to war, they do so beneath a shrouding squall of cyber-static and filament-heavy banks of sacred incense.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.
TARGET: One SKITARII INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, your unit can only be selected as the target of a ranged attack if the attacking model is within 18".
TARGET: One SKITARII INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.
EFFECT: Until the end of the phase, your unit can only be selected as the target of a ranged attack if the attacking model is within 18".