Imperial Knights – Acastus Knight Asterius
 ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
Acastus Knight Asterius
(⌀Use model)
M
8"
T
13
Sv
2+
W
30
Ld
6+
OC
10
INVULNERABLE SAVE*
5+
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Asterius volkite culverin [devastating wounds]
Asterius volkite culverin [devastating wounds]
24"
6
3+
6
0
2
Karacnos mortar battery [anti-infantry 2+, blast, ignores cover, indirect fire]
Karacnos mortar battery [anti-infantry 2+, blast, ignores cover, indirect fire]
48"
D6+3
3+
6
-1
1
Twin conversion beam cannon [conversion, sustained hits d3, twin-linked]
Twin conversion beam cannon [conversion, sustained hits d3, twin-linked]
48"
3
3+
16
-2
6
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Titanic feet
Titanic feet
Melee
6
4+
10
-1
2
Conversion: Each time an attack made with this weapon targets a unit more than 12" from the bearer, an unmodified successful Hit roll of 4+ scores a Critical Hit.
WARGEAR OPTIONS
  • None

ABILITIES
CORE: Deadly Demise 2D6
FACTION: Code Chivalric, Super-heavy Walker
Sunderer of Fortresses: Each time this model makes an attack that targets a VEHICLE, improve the Strength and Damage characteristics of that attack by 1. If that attack targets a FORTIFICATION, improve the Strength and Damage characteristics of that attack by 2 instead.
UNIT COMPOSITION
  • 1 Acastus Knight Asterius
This model is equipped with: 2 Asterius volkite culverins; karacnos mortar battery; 2 twin conversion beam cannons; titanic feet.
1 model
765
DAMAGED: 1-10 WOUNDS REMAINING
While this model has 1-10 wounds remaining, subtract 5 from this model’s Objective Control characteristic and each time this model makes an attack, subtract 1 from the Hit roll.
KEYWORDS: VEHICLE, WALKER, TITANIC, TOWERING, ACASTUS, IMPERIUM, KNIGHT ASTERIUS
FACTION KEYWORDS:
IMPERIAL KNIGHTS
STRATAGEMS
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
TANK SHOCK
1CP
Core – Strategic Ploy
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
SHOULDER THE BURDEN
2CP
Noble Lance – Battle Tactic
TROPHY CLAIM
2CP
Noble Lance – Epic Deed
ROTATE ION SHIELDS
1CP
Noble Lance – Wargear
THUNDERSTOMP
1CP
Noble Lance – Epic Deed
VALIANT LAST STAND
2CP
Noble Lance – Epic Deed
OMNISSIAH’S GRACE
1CP
Questor Forgepact – Strategic Ploy
VENGEANCE OF THE MACHINE CULT
1CP
Questor Forgepact – Strategic Ploy
BONDED IMPERATIVE
1CP
Questor Forgepact – Epic Deed
MACHINE FOCUS
1CP
Questor Forgepact – Strategic Ploy
THRONEGHEIST FURY
1CP
Questor Forgepact – Strategic Ploy
AGGRESSION BEGETS AGGRESSION
1CP
Questor Forgepact – Strategic Ploy
DETACHMENT ABILITY
Indomitable Heroes
Cogbound Alliance
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
Disembark
If a unit from your army starts your Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase.

When a unit disembarks from a TRANSPORT model, set it up on the battlefield so that it is wholly within 3" of that TRANSPORT model and not within Engagement Range of any enemy models. If, for any reason, a disembarking model cannot be set up, that model’s unit cannot disembark.

Units that disembark from a TRANSPORT model that either Remained Stationary this phase or has not yet made a Normal, Advance or Fall Back move this phase can then act normally (make a Normal move, Advance, shoot, declare a charge, fight, etc.) in the remainder of the turn. Such a disembarking unit cannot choose to Remain Stationary.

Units that disembark from a TRANSPORT model that made a Normal move this phase count as having made a Normal move themselves; they cannot move further during this phase. Such a unit also cannot declare a charge in the same turn, but can otherwise act normally in the remainder of the turn.

Units cannot disembark from a TRANSPORT model that either Advanced or Fell Back this turn.

  • Units that start your Movement phase embarked within a TRANSPORT can disembark this phase, provided their TRANSPORT has not Advanced or Fallen Back.
  • If a unit disembarks before its TRANSPORT moves, it can act normally.
  • If a unit disembarks after its TRANSPORT moves, it cannot move or charge this turn, but can otherwise act normally.
  • Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models (or the unit cannot disembark).
  • Units that disembark this turn cannot Remain Stationary.
Hazardous

Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.

Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):
  • If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
  • Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
  • Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a model was selected, that unit suffers 3 mortal wounds and when allocating those mortal wounds, they must be allocated to the selected model.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.

Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and so one of those models suffers 3 mortal wounds.

  • After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, a model equipped with a hazardous weapon suffers 3 mortal wounds, that must be allocated to the selected model.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.

Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.

  • A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Mortal Wounds

Some attacks are so powerful that no armour or force field can withstand their fury.

Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.

If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.

If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.

  • Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
  • Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
DEADLY DEMISE

From detonating ammo stores to corrosive innards or frenzied death throes, some targets are deadly even in defeat.

Some models have ‘Deadly Demise x’ listed in their abilities. When such a model is destroyed, roll one D6 before removing it from play (if such a model is a TRANSPORT, roll before any embarked models disembark). On a 6, each unit within 6" of that model suffers a number of mortal wounds denoted by ‘x’ (if this is a random number, roll separately for each unit within 6").

Example: A TRANSPORT model with the Deadly Demise D3 ability is destroyed. Before any models disembark and before removing it from play, its controlling player rolls one D6, getting a 6. There are three units within 6" of that destroyed model, so its controlling player rolls one D3 for each of them, inflicting mortal wounds accordingly.

  • Deadly Demise x: When this model is destroyed, roll one D6. On a 6, each unit within 6" suffers ‘x’ mortal wounds.
Code Chivalric

Imperial Knights fight by a stringent set of codes to ensure that in addition to defeating the enemy, honour is always upheld.

If your Army Faction is , at the end of the Read Mission Objectives step, you must select one of the Oaths below to be active for your army. Models from your army with this ability gain the associated Oath ability, and you gain the associated Deed to complete.

If, at the start of any of your Command phases, your selected Oath’s Deed is completed, your army becomes Honoured for the rest of the battle and you gain 3CP (you can only gain CP in this way once per battle, and CP gained in this way are an exemption to the Core Rules that limit the maximum number of CP you can gain per battle round to 1).

LAY LOW THE TYRANT
  • Oath Ability: Each time this model is selected to shoot or fight, you can re-roll one Hit roll and you can re-roll one Wound roll.
  • Deed: This deed is completed if the enemy WARLORD is destroyed.

RECLAIM THE REALM
  • Oath Ability: Add 1" to this model’s Move characteristic and add 1 to Advance and Charge rolls made for this model.
  • Deed: This deed is completed if you control one or more objective markers in your opponent’s deployment zone.
Super-heavy Walker
Each time a model with this ability makes a Normal, Advance or Fall Back move, it can move through models (excluding TITANIC models) and sections of terrain features that are 4" or less in height. When doing so:
  • It can move within Engagement Range of enemy models, but cannot end that move within Engagement Range of them.
  • It can also move through sections of terrain features that are more than 4" in height, but if it does, after it has moved, roll one D6: on a 1, that model is Battle-shocked.’
Lethal Hits

Some weapons can inflict fatal injuries on any foe, no matter their resilience.

Weapons with [LETHAL HITS] in their profile are known as Lethal Hits weapons. Each time an attack is made with such a weapon, a Critical Hit automatically wounds the target.
Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.

  • Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
  • Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
  • Critical Hit: Unmodified Hit roll of 6. Always successful.
  • An unmodified Hit roll of 1 always fails.
  • A Hit roll can never be modified by more than -1 or +1.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Blast

High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.

Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).

Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.

  • Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
  • Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
Indirect Fire

Indirect fire weapons launch munitions over or around intervening obstacles – nowhere is safe from their fury.

Weapons with [INDIRECT FIRE] in their profile are known as Indirect Fire weapons, and attacks can be made with them even if the target is not visible to the attacking model. These attacks can destroy enemy models in a target unit even though none may have been visible to the attacking unit when you selected that target.

If no models in a target unit are visible to the attacking unit when you select that target, then each time a model in the attacking unit makes an attack against that target using an Indirect Fire weapon, subtract 1 from that attack’s Hit roll, an unmodified Hit roll of 1-3 always fails, and the target has the Benefit of Cover against that attack. Weapons with the [TORRENT] ability cannot be fired using the [INDIRECT FIRE] ability.

Example: An enemy unit is targeted by an attacking model equipped with a weapon with the [INDIRECT FIRE] ability. No models in the target unit are visible to the attacking model, so when resolving the attacks made with that weapon, subtract 1 from that attack’s Hit roll an unmodified Hit roll of 1-3 always fails, and each time an attack is allocated to a model in the target unit, it has the Benefit of Cover against that attack.

  • Can target and make attacks against units that are not visible to the attacking unit.
  • If no models are visible in a target unit when it is selected, then when making an attack against that target with an Indirect Fire weapon, subtract 1 from that attack’s Hit roll, an unmodified Hit roll of 1-3 always fails, and the target has the Benefit of Cover against that attack.
Anti

Certain weapons are the bane of a particular foe.

Weapons with [ANTI-KEYWORD X+] in their profile are known as Anti weapons. Each time an attack is made with such a weapon against a target with the keyword after the word ‘Anti-’, an unmodified Wound roll of ‘x+’ scores a Critical Wound.

Example: An attack made with an [ANTI-VEHICLE 4+] weapon will score a Critical Wound against – and so successfully wound – a VEHICLE unit on an unmodified Wound roll of 4+, while an attack made with an [ANTI-PSYKER 2+] weapon will score a Critical Wound against – and so successfully wound – a PSYKER unit on an unmodified Wound roll of 2+.

  • [ANTI-KEYWORD X+]: An unmodified Wound roll of ‘x+’ against a target with the matching keyword scores a Critical Wound.
Twin-linked

Dual weapons are often grafted to the same targeting system for greater lethality.

Weapons with [TWIN-LINKED] in their profile are known as Twin-linked weapons. Each time an attack is made with such a weapon, you can re-roll that attack’s Wound roll.

The ACASTUS keyword is used in the following Imperial Knights datasheets:

Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.

WOUND ROLL
ATTACK’S STRENGTH VS TARGET’S TOUGHNESSD6 RESULT REQUIRED
Strength is TWICE (or more than twice) the Toughness.
+
Strength is GREATER than the Toughness.
+
Strength is EQUAL to the Toughness.
+
Strength is LESS than the Toughness.
+
Strength is HALF (or less than half) the Toughness.
+

If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.

  • Critical Wound: Unmodified Wound roll of 6. Always successful.
  • An unmodified Wound roll of 1 always fails.
  • A Wound roll can never be modified by more than -1 or +1.
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.

If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.

An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.

  • Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
  • An unmodified saving throw of 1 always fails.
  • A saving throw can never be improved by more than +1.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.

  • Advance Move: Models move up to M+D6".
  • Cannot move within Engagement Range of any enemy models.
  • Units that Advance cannot shoot or charge this turn.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.

You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
  • Within Engagement Range of every unit that you selected as a target of the charge.
  • Without moving within Engagement Range of any enemy units that were not a target of the charge.
  • In Unit Coherency.
If any of these conditions cannot be met, the charge fails and no models in the charging unit move this phase. Otherwise, the charge is successful and the models in the charging unit make a Charge move – move each model a distance in inches up to the result of the Charge roll. When doing so, each model in the charging unit must end its Charge move closer to one of the units selected as a target of its charge. If you can also move a charging model so that it ends its Charge move in base-to-base contact with one or more enemy models while still enabling the charging unit to end its move satisfying all of the conditions above, you must do so. The controlling player chooses the order in which to move their models.

  • Charge Roll: 2D6".
  • Targets of a charge must be within 12" but do not need to be visible.
  • If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
  • Cannot move within Engagement Range of any unit that was not a target of the charge.
  • If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.

A unit cannot shoot or declare a charge in the same turn that it Fell Back.

Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.

Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.

  • Fall Back Move: Models move up to M".
  • Units that Fall Back cannot shoot or declare a charge in the same turn.
  • Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
  • If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
  • Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.

While a unit is Battle-shocked:

Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.

In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.

  • Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
  • Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
  • Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
  • Battle-shocked units must take Desperate Escape tests if they Fall Back.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.

TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).

EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.

TARGET: One unit from your army that has not been selected to shoot this phase.

EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.

Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.

  • Engagement Range: Within 1" horizontally and 5" vertically.
  • Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.

You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.

  • Unmodified Dice: the result after re-rolls, but before any modifiers.
  • A dice can never be re-rolled more than once.
  • You must re-roll all dice if several need adding together (e.g. 2D6).
  • Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.

TARGET: That unit from your army.

EFFECT: Your unit automatically passes that Battle-shock test.

RESTRICTIONS: You cannot use this Stratagem more than once per battle.
Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.

FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance or Fall Back move, or declares a charge.

TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.

EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.

RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
DEEP STRIKE

Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.

During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.
  • Unit can be set up in Reserves instead of on the battlefield.
  • Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.

TARGET: One unit from your army that is in Reserves.

EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).

RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
TANK SHOCK
1CP
Core – Strategic Ploy Stratagem
Ramming the foe with a speeding vehicle may be an unsubtle tactic, but it is a murderously effective one.
WHEN: Your Charge phase, just after a VEHICLE unit from your army ends a Charge move.

TARGET: That VEHICLE unit.

EFFECT: Select one enemy unit within Engagement Range of your unit, and select one VEHICLE model in your unit that is within Engagement Range of that enemy unit. Roll a number of D6 equal to the Toughness characteristic of the selected VEHICLE model. For each 5+, that enemy unit suffers 1 mortal wound (to a maximum of 6 mortal wounds).
Charge Bonus

Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.

Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.
HEROIC INTERVENTION
1CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.

TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.

EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.

RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
SHOULDER THE BURDEN
2CP
Noble Lance – Battle Tactic Stratagem
When faced with their darkest hour, knightly Nobles rise to the challenge, for nothing shall deter them from fulfilling their duty.
WHEN: Your Command phase.

TARGET: One model from your army that has lost one or more wounds.

EFFECT: Until the start of your next Command phase, improve your model’s Move, Toughness, Save, Leadership and Objective Control characteristics by 1 and each time your model makes an attack, add 1 to the Hit roll.

RESTRICTIONS: You can only use this Stratagem once per battle. If your army is Honoured, you can use this Stratagem one additional time.
TROPHY CLAIM
2CP
Noble Lance – Epic Deed Stratagem
Once a mighty foe is laid low, the victorious Knight’s emitters blare its triumph, announcing the glory brought to the Imperium, but shame awaits those who fail in such confrontations.
WHEN: Your Shooting phase or the Fight phase.

TARGET: One model from your army that has not been selected to shoot or fight this phase, and one enemy MONSTER or VEHICLE unit.

EFFECT: Until the end of the phase, each time your model makes an attack that targets that enemy unit, add 1 to the Wound roll. If your model destroys that enemy unit this phase, you gain 1CP, but if your model does not destroy that enemy unit this phase, you cannot use this Stratagem again for the rest of the battle.
Invulnerable Saves

Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.

Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.

Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.

  • Invulnerable Save: Never modified by an attack’s AP.
  • The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
ROTATE ION SHIELDS
1CP
Noble Lance – Wargear Stratagem
Veteran Knight pilots can swiftly angle their ion shields to better deflect incoming fire.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One model from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, that model has a 4+ invulnerable save against ranged attacks.
THUNDERSTOMP
1CP
Noble Lance – Epic Deed Stratagem
The Noble brings their Knight suit’s full weight crashing down with the force of an industrial piledriver. Few can survive such a blow.
WHEN: Fight phase.

TARGET: One model from your army that has not been selected to fight this phase.

EFFECT: Until the end of the phase, your model cannot target MONSTER or VEHICLE units, but all melee weapons equipped by your model have the [DEVASTATING WOUNDS] ability.
VALIANT LAST STAND
2CP
Noble Lance – Epic Deed Stratagem
Badly wounded, their Knight’s generator on the verge of overload, still the Noble fights on, drawing upon their reserves of chivalric heroism to sell their life as dearly as they can.
WHEN: Fight phase.

TARGET: One model from your army that was just destroyed and that is eligible to fight but has not been selected to fight this phase. You can use this Stratagem on that model even though it was just destroyed.

EFFECT: Before rolling to see if this model deals any mortal wounds as a result of its Deadly Demise ability, it can fight; when doing so, it is assumed to have 1 wound remaining, or all its wounds remaining if your army is Honoured. After it has finished resolving its attacks, resolve its Deadly Demise ability as normal.

RESTRICTIONS: You cannot target SIR HEKHTUR with this Stratagem.

The ADEPTUS MECHANICUS keyword is used in the following Imperial Knights datasheets:

Feel No Pain
FEEL NO PAIN

Some warriors refuse to be laid low, even by what should be fatal wounds.

Some models have ‘Feel No Pain x+’ listed in their abilities. Each time a model with this ability suffers damage and so would lose a wound (including wounds lost due to mortal wounds), roll one D6: if the result is greater than or equal to the number denoted by ‘x’, that wound is ignored and is not lost. If a model has more than one Feel No Pain ability, you can only use one of those abilities each time that model suffers damage and so would lose a wound.

  • Feel No Pain x+: Each time this model would lose a wound, roll one D6: if the result equals or exceeds ‘x’, that wound is not lost.
OMNISSIAH’S GRACE
1CP
Questor Forgepact – Strategic Ploy Stratagem
So resolute is their faith that the Machine God’s worshippers brave storms of killing fire, trusting in the Omnissiah to shield them from harm.
WHEN: Any phase, just after a mortal wound is allocated to an or ADEPTUS MECHANICUS unit from your army.

TARGET: That or ADEPTUS MECHANICUS unit.

EFFECT: Until the end of the phase, models in your unit have the Feel No Pain 5+ ability against mortal wounds.
VENGEANCE OF THE MACHINE CULT
1CP
Questor Forgepact – Strategic Ploy Stratagem
Those who dare to fell the Machine God’s creations find themselves subject to the vengeance of the Adeptus Mechanicus.
WHEN: Any phase.

TARGET: One unit from your army that was just destroyed. You can use this Stratagem on that unit even though it was just destroyed.

EFFECT: Until the end of the battle, the enemy unit that destroyed your unit is Marked. Each time an ADEPTUS MECHANICUS model from your army makes an attack that targets a Marked unit, that attack has the [LETHAL HITS] ability.

The ARMIGER keyword is used in the following Imperial Knights datasheets:

Bondsman Abilities
Some QUESTORIS models have a Bondsman ability, tagged with the word ‘Bondsman’. In your Command phase, one or more models from your army with a Bondsman ability can use that ability. For each one that does, select one friendly ARMIGER model within 12" of that model (you cannot select an ARMIGER model that is already being affected by a Bondsman ability). Until the start of your next Command phase, the ARMIGER model you selected is affected by that Bondsman ability.
BONDED IMPERATIVE
1CP
Questor Forgepact – Epic Deed Stratagem
Tapping into the noospheric battle-sphere, this Noble pilot issues binharic commands directly into the minds of Adeptus Mechanicus allies.
WHEN: Your Command phase, just before an CHARACTER unit from your army uses a Bondsman ability.

TARGET: That CHARACTER unit.

EFFECT: When selecting targets for that use of that Bondsman ability, you can select one friendly ADEPTUS MECHANICUS unit within 12" of your unit in addition, or instead of selecting one ARMIGER model. Until the start of your next Command phase, every model in that ADEPTUS MECHANICUS unit is affected by that Bondsman ability.

RESTRICTIONS: You cannot target a KNIGHT PRECEPTOR with this Stratagem.
MACHINE FOCUS
1CP
Questor Forgepact – Strategic Ploy Stratagem
Soothing psalm programs inloaded by Tech-Priests focus targeting arrays and enhance the responsiveness of the Noble pilot’s mighty Knight suit.
WHEN: Your Command phase.

TARGET: One unit from your army.

EFFECT: Until the start of your next turn, your unit
can ignore any or all modifiers to the following: the Weapon Skill or Ballistic Skill characteristics of weapons equipped by its models; any Hit roll or Wound roll made for it.
THRONEGHEIST FURY
1CP
Questor Forgepact – Strategic Ploy Stratagem
As augurs detect enemy movements, the pilot’s Throne Mechanicum comes alive with the whispered fury of their ancestors. Weapon systems flare instinctively to life, dispensing the hatred of long-dead Nobles upon the unfortunate foe.
WHEN: Your opponent’s Movement phase, just after an enemy unit is set up or ends a Normal, Advance, or Fall Back move.

TARGET: One TITANIC unit from your army that is within 24" of and visible to that enemy unit.

EFFECT: Select one ranged weapon equipped by a model in your unit. That model can shoot at that enemy unit (and only if it is an eligible target). When doing so, that model can only make attacks with that weapon and each time it makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers.
Assault

Assault weapons fire so indiscriminately that they can be shot from the hip as warriors dash forward.

Weapons with [ASSAULT] in their profile are known as Assault weapons. If a unit that Advanced this turn contains any models equipped with Assault weapons, it is still eligible to shoot in this turn’s Shooting phase. When such a unit is selected to shoot, you can only resolve attacks using Assault weapons its models are equipped with.

  • Can be shot even if the bearer’s unit Advanced.
AGGRESSION BEGETS AGGRESSION
1CP
Questor Forgepact – Strategic Ploy Stratagem
Driven by the wrathful whisperings of their Throne Mechanicum, the Noble pilot guides their Knight suit forward, weapons blazing with every step. Inspired by their titanic ally, the warriors of the Adeptus Mechanicus follow suit, pushing their cybernetic systems to the limit.
WHEN: Your Shooting phase.

TARGET: One unit from your army or one CHARACTER unit from your army and one friendly ADEPTUS MECHANICUS unit that is within 6" of that unit.

EFFECT: Until the end of the phase, ranged weapons equipped by models in your units have the [ASSAULT] ability.
Indomitable Heroes
Noble Lance Detachment

Gathered into a powerful formation known as a lance, Imperial Knights and the Nobles who pilot them wage their honour-driven assaults with renowned resilience and bloody-minded determination.

All models from your army have the Feel No Pain 6+ ability. If your army is Honoured, those models have the Feel No Pain 5+ ability.

The TECH-PRIEST keyword is used in the following Imperial Knights datasheets:

Cogbound Alliance
Questor Forgepact Detachment

The Nobles of Questor Mechanicus houses commonly fight alongside the armies of forge worlds. They are bound together by their shared devotion to the Machine Cult.

units from your army have the following the ability:

Sacristan Pledge: In your Command phase, one model in this unit regains 1 lost wound. If this unit is within 3" of one or more friendly TECH-PRIEST models, one model in this unit regains up to D3 lost wounds instead.

ADEPTUS MECHANICUS units from your army have the following ability:

Divine Inspiration: Each time a model in this unit makes a ranged attack, re-roll a Hit roll of 1. If this unit is within 6" of one or more friendly units, re-roll a Wound roll of 1 as well.

FORGE WORLD ALLIES
You can include the following ADEPTUS MECHANICUS units in your army: TECH-PRIEST DOMINUS; TECH-PRIEST MANIPULUS; SKITARII MARSHAL; SKITARII RANGERS; SKITARII VANGUARD. The combined points cost of such units depends on your battle size:
  • Incursion: Up to 250 pts
  • Strike Force: Up to 500 pts
  • Onslaught: Up to 750 pts

No ADEPTUS MECHANICUS models from your army can be your WARLORD.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Ignores Cover

Some weapons are designed to root enemy formations out of entrenched positions.

Weapons with [IGNORES COVER] in their profile are known as Ignores Cover weapons. Each time an attack is made with such a weapon, the target cannot have the Benefit of Cover against that attack.
Sustained Hits

Some weapons strike in a flurry of blows, tearing the foe apart with relentless ferocity.

Weapons with [SUSTAINED HITS X] in their profile are known as Sustained Hits weapons. Each time an attack is made with such a weapon, if a Critical Hit is rolled, that attack scores a number of additional hits on the target as denoted by ‘x’.

Example: A model makes an attack with a melee weapon with the [SUSTAINED HITS 2] ability. If the Hit roll is an unmodified 6 (a Critical Hit), then that attack scores a total of 3 hits on the target (1 from the successful Hit roll of 6, and 2 from the [SUSTAINED HITS 2] ability).

  • [SUSTAINED HITS X]: Each Critical Hit scores ‘x’ additional hits on the target.
© Vyacheslav Maltsev 2013-2024