Datasheets
Army List
Datasheets collated
High Command
• Force Commander
Elites
• Grenadier Troop
Heavy Assault
• Beastmaster Troop
• Ogryn Brute Troop
Troops
• Infantry Troop
• Levy Troop
War Engine
• Sentinel Patrol
Heavy Transport
• Militia Gorgon Transporter
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

The Imperialis Militia – Reconnaissance Troop

This datasheet does not meet the selection criteria (see Settings tab).
Reconnaissance Troop
UNIT COMPOSITION: 1 SCOUT SERGEANT, 4 SCOUTS
50 PointsPts
• May include up to 5 additional Scouts at +8 Points per Model.

While under-equipped and poorly trained in comparison to many other military formations in the Imperium, the Imperialis Militia does often have the advantage of fighting on familiar ground. Militia reconnaissance troops consist of individuals with a keen sense of field-craft who are experienced scouts and trackers, able to mount ambushes and wide flanking attacks against an invader thanks to their knowledge of the land and ability to move unseen. Many of these skills can be brought to bear should a militia force be mobilised into a larger army and, as such, they are to be found in Traitor and Loyalist war hosts alike.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Scout Sergeant (⌀?) 6 6 5 5
Scout Sergeant (⌀?) 6 3 3 3 3 1 3 1 6 6 5 5 5+ -
Scout (⌀?) 6 5 5 5
Scout (⌀?) 6 3 3 3 3 1 3 1 6 5 5 5 5+ -
WARGEAR
  • Militia shotgun
  • Frag grenades
TRAITS
  • [Allegiance]
  • Imperialis Militia
  • Smokescreen
SPECIAL RULES
  • Infiltrate (9)
  • Irregulars
  • Move Through Cover
  • Support Unit (2)
TYPE
  • Scout Sergeant: Infantry (Sergeant, Light)
  • Scout: Infantry (Light)
OPTIONS
  • Any Model in this Unit may have its militia shotgun exchanged for one item from the Militia Armaments list.
  • Up to five Models in this Unit may have their militia shotgun exchanged for one militia longrifle for +5 Points per Model.
  • One Scout in this Unit may have one militia vox selected for it for +10 Points.
  • The Scout Sergeant in this Unit may have melta bombs selected for it for +10 Points.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Breaching (X)

Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.

With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.

When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.

A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.

In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
  1. Select Target Unit.
  2. Check Target.
  3. Declare Weapons.
  4. Set Fire Groups.
  5. Select Fire Group To Resolve.
  6. Make Hit Tests.
  7. Make Wound Tests.
  8. Select Target Model.
  9. Make Saving Throws & Damage Mitigation Tests.
  10. Select Next Fire Group.
  11. Remove Casualties.
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)

Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.

Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.

When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.

Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.

If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.

Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.

If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Frag Grenades

This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.

Frag grenades can be used to make attacks during the Volley Step.

When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Frag Grenades
Frag Grenades
6
1
3
6
1
Blast (3")
Assault
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
Detonation

Designed to be carefully attached to a target and blast precise holes in the thickest armour, these cumbersome devices are ill-suited to open war. However, when a vulnerable target can be isolated in battle, there are no better tools for piercing its protection.

Weapons with this Special Rule can only attack Vehicles and immobile Models.

A Weapon or attack with this Special Rule may only be selected during Step 2 of any Combat in the Fight Sub-Phase if the Unit making attacks is only Locked in Combat with enemy Units composed of Models with the Vehicle Type and Models with a Movement Characteristic of ‘0’ or ‘-’. If a Unit is Locked in Combat with any enemy Units that include any Models that do not have the Vehicle Type or a Movement Characteristic of ‘0’ or ‘-’ then no Model may use a Weapon or other attack that has this Special Rule.

A Weapon or other attack with this Special Rule may also be used to make attacks targeting a Model with the Building Type or a Terrain Piece that has a Toughness or Armour Characteristic.

The [Allegiance] Trait is used in the following The Imperialis Militia datasheets:

High Command
Elites
Heavy Assault
Troops
War Engine
Heavy Transport

The Imperialis Militia Trait is used in the following The Imperialis Militia datasheets:

High Command
Elites
Heavy Assault
Troops
War Engine
Heavy Transport
Infantry

Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.

Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.
Irregulars

With limited military training or experience, few militia forces were truly prepared for the horrors of the Horus Heresy. Those units committed to the war for the Imperium would be forced to rely on sheer numbers to carry the day, sending wave after wave of ill-prepared and under-equipped warriors to their deaths in order to hold back the foe.

A Unit composed of Models with this Special Rule can still score Objectives when Pinned, Stunned or Suppressed, and is automatically destroyed when it Falls Back into contact with a Battlefield Edge.

A Unit which is entirely composed of Models with this Special Rule (but not the Cavalry Type) is still eligible to Control or Contest an Objective Marker if it is affected by the Pinned, Stunned or Suppressed Tactical Status (in any combination), but only scores 1 Victory Point for that Objective Marker when affected by these Statuses, regardless of its value and any other Special Rules such as Line (X). While affected by any Tactical Status, Models in this Unit do not add the value of any variant of the Line (X) Special Rule they may have to their Tactical Strength when deciding if they can contest an Objective.

Additionally, when a Model from a Unit containing any Models with this Special Rule moves into Base Contact with any point on the Battlefield Edge as part of a Fall Back Move, all Models in that Unit are automatically removed as Casualties.
CHARGE – A ‘Charge’ is a special type of multi-stage move made during the Assault Sequence. Unlike a normal move, Models moved as part of any Step of a Charge may end the move in Base Contact with an enemy Model.
Pinning (X)

The crack of the sniper’s rifle or the burst of heavy artillery, both signal a sudden and indiscriminate death and send infantry scurrying for cover. Such weapons are meant as much to pin the foe in place as to kill them, breaking up advancing ranks of troops and shattering defensive formations.

Weapons and other attacks that have the Pinning (X) Special Rule have a chance of inflicting the Pinned Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Pinned Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Armourbane

Heavy beams and armour-piercing cannon rarely inflict superficial damage, but always blast and break the hull of their target. Such weapons are superior tank killers, their sheer power prized over lesser weapons when the objective is to apply maximum damage without concern for finesse.

A Weapon with the Armourbane Special Rule counts Glancing Hits as Penetrating Hits.

When making Armour Penetration Tests for an attack with this Special Rule, a result that is equal to, or greater than, the target Armour Value inflicts a Penetrating Hit. A Weapon with this Special Rule can never inflict a Glancing Hit, and any Rule that would force them to do so instead inflicts a Penetrating Hit.

Melta bombs

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Melta bombs
Melta bombs
-3
1
9
2
4
Armourbane, Detonation
-
Army List
Datasheets collated
High Command
• Force Commander
Elites
• Grenadier Troop
Heavy Assault
• Beastmaster Troop
• Ogryn Brute Troop
Troops
• Infantry Troop
• Levy Troop
War Engine
• Sentinel Patrol
Heavy Transport
• Militia Gorgon Transporter
Faction Rules
• The Imperialis Militia Army List
• The Muster of Worlds: Provenances Of War
• Imperialis Militia Detachments
• Wargear Lists
• Special Rules
• Wargear
• Psychic Disciplines
• Imperialis Militia Advanced Reactions
• Armoury of the Imperialis Militia

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Heavy (X)

Some weapons are so heavy that, while they can be fired on the move, are more powerful when properly braced and made ready before shooting. Warriors on the battlefield must use their judgement to decide when speed is required and when the full firepower of their arsenal must be unleashed.

Weapons with the Heavy (X) Special Rule gain +1 to a Characteristic when Stationary.

When making a Shooting Attack with a Weapon that has the Heavy (X) Special Rule, a modifier of +1 is added to a Characteristic if the Model with that Weapon is part of a Unit that remained Stationary in the Controlling Player’s previous Movement Phase. If the Characteristic listed is AP, then instead it improves the AP by one Step (see the Rules for modifying Saves and AP). The value of X in the specific variant of the Heavy (X) Special Rule determines which Characteristic gains the +1 modifier.

Militia rifle

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Militia rifle
Militia rifle
24
1
3
-
1
Heavy (FP)
-

Militia carbine

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Militia carbine
Militia carbine
18
1
3
-
1
-
Assault

Militia shotgun

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Militia shotgun
Militia shotgun
8
1
4
-
1
-
Assault
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
ENGAGED
A Model is Engaged if either:
  • That Model is in Base Contact with an enemy Model in the same Combat.
  • That Model is no more than 2" from another Model in the same Unit which is in Base Contact with an enemy Model.
Precision (X)

On the battlefields of the Horus Heresy, precision proves far more valuable than wanton carnage, allowing attacks to be placed on the most valuable targets and not the chaff of the enemy army. Whether through well-honed skill or artfully crafted weapons, warriors capable of such feats are highly sought after in any host.

Attacks made with the Precision (X) Special Rule are allocated by the Attacking Player, not the Defender.

When any Hit Test is made for an attack with the Precision (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Precision (X) Special Rule, then if a Hit is inflicted by that roll, that Hit becomes a ‘Precision Hit’.

These Precision Hits must form a separate Fire Group or Strike Group. Wound Tests are made as normal for Precision Hits and cause Precision wounds. In Step 8 of the Shooting Attack process or Step 7 of the Initiative Step sequence, when selecting a Target Model for a Fire Group or Strike Group that is made up of Precision wounds, the Target Model is not selected using the normal Rules. Instead the attacking Player chooses which Model in the Target Unit will be the Target Model, and may select any Model that is a part of that Unit.

Note that Models Engaged in a Challenge cannot use this Special Rule to allocate Hits to any Model other than the enemy Model that is Engaged in the same Challenge and that any attacks which are made as Snap Shots, or for Weapons or attacks that have either the Blast (X), Barrage (X), Template or Reaping Blow (X) Special Rules, may never trigger the Precision (X) Special Rule no matter what the result of the Hit Test is.

Militia longrifle

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Militia longrifle
Militia longrifle
36
1
4
-
1
Heavy (RS), Breaching (6+), Precision (5+), Pinning (1)
-
Militia Vox

A militia vox generally takes the form of a large communications pack that allows contact between a unit and their command elements. While these are the most common tools for such communications, some less well-equipped militias may instead use signal flags, coloured flares or even musical instruments such as drums or horns to convey instructions or reinforce morale.

Militia voxes allows the Controlling Player to roll an additional dice when making Checks to remove Statuses in the End Phase.

When making a Cool or Leadership Check in the Statuses Sub-Phase of the End Phase to remove a Tactical Status from a Unit which includes any Models with a Militia vox, the Controlling Player may roll an additional Dice, discarding the Dice which, once rolled, has the highest result, as long as at least one Model in that Unit has Line of Sight to a friendly Model with the Command Sub-Type and the Imperialis Militia Trait which is not affected by any Statuses.
Sergeant

The humble sergeant stands as one of the greatest weapons in the arsenals of any army. Skilled in war and in leadership, each sergeant is the beating heart of their unit and the cornerstone upon which victory is built.

The following Rules apply to all Models with the Sergeant Sub-Type:
  • The Controlling Player of a Unit that includes one or more Models with the Sergeant Sub-Type may use the Characteristics of one of those Models to resolve any Characteristic Check made for that Unit.
Support Unit (X)

Following behind frontline forces and providing fire support to overcome especially dug-in foes, some units are not equipped for holding positions or seizing ground, and instead focus their attention on aiding their allies.

A Unit that contains Models with this Special Rule scores fewer Victory Points for Controlling Objective Markers.

A Unit that includes any Models with the Support Unit (X) Special Rule may only ever score a maximum number of Victory Points equal to the value of X for Controlling an Objective, regardless of the Value of that Objective, or any other Special Rules Models in that Unit might have (such as the Line (X) Special Rule).
Militia Armaments
  • - Militia rifle
    Free
  • - Militia carbine
    Free
  • - Militia shotgun
    Free
Light

Light troops are equipped and trained to fight on the move, pausing only briefly and trusting to speed over cover or heavy armour. Many armies will make use of such warriors as scouts, but they also serve as harassers and pursuit troops.

The following Rules apply to all Models with the Light Sub-Type:
  • A Unit that includes only Models with the Light Sub-Type gains a +2 modifier to its Initiative when determining how far that Unit may Rush (this bonus stacks with other bonuses to Rush distance).
  • A Unit that includes only Models with the Light Sub-Type may make Shooting Attacks after having Rushed, but makes all such Shooting Attacks as Snap Shots. Models or Weapons that cannot attack as Snap Shots may not make attacks.

The Smokescreen (see Smokescreen Advanced Reaction) Trait is used in the following The Imperialis Militia datasheets:

Heavy Transport
Recon
Fast Attack
Armour
Lords of War

This datasheet has Recon Battlefield Role. Full list of The Imperialis Militia units sharing same Battlefield Role follows:

Infiltrate (X)

Some warriors are skilled at infiltrating enemy lines. When battle commences the foe will find such warriors almost upon them, ready to fight even before the first shot is fired.

Models with the Infiltrate (X) Special Rule can deploy outside of their Deployment Zone.

At the start of a Mission, when deploying Units, the Controlling Player of a Unit that is composed entirely of Models with the Infiltrate (X) Special Rule may choose to deploy that Unit outside of that Player’s Deployment Zone. That Unit may be deployed anywhere that is either in the Controlling Player’s Deployment Zone or outside of the Opposing Player’s Deployment Zone and is at least a number of inches equal to the highest value of X attached to any variant of the Infiltrate (X) Special Rule in that Unit away from any enemy Model.

Units deployed using the Infiltrate (X) Special Rule are deployed at the same time as other Units under a Player’s control, unless the specific Rules of a given Mission state otherwise. The Infiltrate (X) Special Rule only has an effect when deploying Units before the start of the First Turn of a Battle, and Units deploying onto the Battlefield after the First Turn has begun gain no benefit from this Special Rule. A Unit that is deployed outside of the Controlling Player’s Deployment Zone by means of this Special Rule may not have a Charge declared for it in the First Battle Turn.
Move Through Cover

Pathfinders and scouts are vital parts of any army, able to lead troops through even the worst terrain at speed. Cunning generals will seek to use such troops to outflank and outmanoeuvre the foe.

The Move Through Cover Special Rule allows the penalties of terrain to be ignored.

A Unit that includes at least one Model with the Move Through Cover Special Rule ignores the effects of Difficult Terrain and Dangerous Terrain. If called upon to take a Dangerous Terrain Test then such a Unit is assumed to automatically pass without any Dice being rolled.
© Vyacheslav Maltsev 2013-2026