Datasheets
Army List
Datasheets collated
High Command
• Force Commander
Elites
• Grenadier Troop
Heavy Assault
• Beastmaster Troop
• Ogryn Brute Troop
Troops
• Infantry Troop
• Levy Troop
War Engine
• Sentinel Patrol
Heavy Transport
• Militia Gorgon Transporter
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

The Imperialis Militia – Militia Baneblade Super-Heavy Battle Tank

This datasheet does not meet the selection criteria (see Settings tab).
Militia Baneblade Super-Heavy Battle Tank
UNIT COMPOSITION: 1 MILITIA BANEBLADE
500 PointsPts

The Baneblade was a common sight upon the battlefields of the Great Crusade, fielded by the myriad arms of the Excertus Imperialis. At the time of the outbreak of the Horus Heresy, the first generations of Baneblades were being replaced in frontline service by more advanced and specialised war machines such as the Stormhammer. As a result, even the Imperialis Militias were beginning to be issued this most formidable of super-heavy tanks, usually in the shape of older machines which had already seen decades of service before being ‘retired’ to second-line formations and planetary arsenals.

Armour Transport Capacity
M BS Front Side Rear HP
Militia Baneblade (⌀?)
Militia Baneblade (⌀?) 10 3 14 13 12 16 -
WARGEAR
  • Turret Mounted Baneblade cannon
  • Co-axial (Baneblade cannon) Mounted autocannon
  • Centreline Mounted demolisher cannon
  • Hull (Front) Mounted twin heavy bolter
  • Smoke launchers
TRAITS
  • [Allegiance]
  • Imperialis Militia
  • Smokescreen
SPECIAL RULES
TYPE
OPTIONS
  • This Model may have one of the following selected for it:
  • Two Sponson Mounted lascannon and two Sponson Mounted twin heavy bolters
    +40 Points
  • Two Sponson Mounted lascannon and two Sponson Mounted twin heavy flamers
    +40 Points
  • This Model may have one item from the Militia Pintle Weapons list selected for it.
  • This Model may have any of the following selected for it:
  • One Hull (Front) Mounted hunter-killer missile
    +5 Points
  • Searchlights
    +5 Points
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Breaching (X)

Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.

With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.

When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.

A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.

In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
  1. Select Target Unit.
  2. Check Target.
  3. Declare Weapons.
  4. Set Fire Groups.
  5. Select Fire Group To Resolve.
  6. Make Hit Tests.
  7. Make Wound Tests.
  8. Select Target Model.
  9. Make Saving Throws & Damage Mitigation Tests.
  10. Select Next Fire Group.
  11. Remove Casualties.
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)

Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.

Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.

When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.

Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.

If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.

Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.

If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.

The [Allegiance] Trait is used in the following The Imperialis Militia datasheets:

High Command
Elites
Heavy Assault
Troops
War Engine
Heavy Transport

The Imperialis Militia Trait is used in the following The Imperialis Militia datasheets:

High Command
Elites
Heavy Assault
Troops
War Engine
Heavy Transport
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Pinning (X)

The crack of the sniper’s rifle or the burst of heavy artillery, both signal a sudden and indiscriminate death and send infantry scurrying for cover. Such weapons are meant as much to pin the foe in place as to kill them, breaking up advancing ranks of troops and shattering defensive formations.

Weapons and other attacks that have the Pinning (X) Special Rule have a chance of inflicting the Pinned Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Pinned Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.
Template

Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.

Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.

When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.

Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.

Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.

Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.

OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.

An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Armourbane

Heavy beams and armour-piercing cannon rarely inflict superficial damage, but always blast and break the hull of their target. Such weapons are superior tank killers, their sheer power prized over lesser weapons when the objective is to apply maximum damage without concern for finesse.

A Weapon with the Armourbane Special Rule counts Glancing Hits as Penetrating Hits.

When making Armour Penetration Tests for an attack with this Special Rule, a result that is equal to, or greater than, the target Armour Value inflicts a Penetrating Hit. A Weapon with this Special Rule can never inflict a Glancing Hit, and any Rule that would force them to do so instead inflicts a Penetrating Hit.
Army List
Datasheets collated
High Command
• Force Commander
Elites
• Grenadier Troop
Heavy Assault
• Beastmaster Troop
• Ogryn Brute Troop
Troops
• Infantry Troop
• Levy Troop
War Engine
• Sentinel Patrol
Heavy Transport
• Militia Gorgon Transporter
Faction Rules
• The Imperialis Militia Army List
• The Muster of Worlds: Provenances Of War
• Imperialis Militia Detachments
• Wargear Lists
• Special Rules
• Wargear
• Psychic Disciplines
• Imperialis Militia Advanced Reactions
• Armoury of the Imperialis Militia

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Heavy (X)

Some weapons are so heavy that, while they can be fired on the move, are more powerful when properly braced and made ready before shooting. Warriors on the battlefield must use their judgement to decide when speed is required and when the full firepower of their arsenal must be unleashed.

Weapons with the Heavy (X) Special Rule gain +1 to a Characteristic when Stationary.

When making a Shooting Attack with a Weapon that has the Heavy (X) Special Rule, a modifier of +1 is added to a Characteristic if the Model with that Weapon is part of a Unit that remained Stationary in the Controlling Player’s previous Movement Phase. If the Characteristic listed is AP, then instead it improves the AP by one Step (see the Rules for modifying Saves and AP). The value of X in the specific variant of the Heavy (X) Special Rule determines which Characteristic gains the +1 modifier.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.

Heavy stubber

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Heavy stubber
Heavy stubber
36
3
4
6
1
-
Auto
Panic (X)

Some weapons are so terrifyingly potent that their use instils abject fear in even the most strong-willed warriors. In the face of such wanton power the target can only flee or prepare for death, for few would live to tell of the true horrors of the Age of Darkness once they were unleashed on the battlefield.

Weapons and other attacks that have the Panic (X) Special Rule have a chance of inflicting the Routed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Leadership Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Routed Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Leadership Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule. If the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Grenade launcher

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Grenade launcher
Grenade launcher
- Frag
- Frag
24
1
3
6
1
Blast (3")
-
- Krak
- Krak
24
1
6
4
2
-
-
Stun (X)

Some weapons are designed not only to kill and main, but also to shock and disorient the foe. Such weapons may rely on blinding flares, bursts of enervating energy or even subtle poisons to slow and disable the enemy, but their effects are the same. Debilitated and vulnerable, warriors struck by such weapons become easy prey.

Weapons and other attacks that have the Stun (X) Special Rule have a chance of inflicting the Stunned Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more Hits on a Target Unit, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Stunned Status and if the Check is passed then there is no further effect. The value of X attached to this Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an Attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Heavy flamer

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Heavy flamer
Heavy flamer
Template
1
5
4
1
Template, Panic (1)
Flame

Autocannon

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Autocannon
Autocannon
48
2
7
4
2
Breaching (6+), Heavy (FP)
Auto
Ordnance (X)

Huge artillery cannon and vast laser weapons are commonly employed as the primary armament of the greatest war machines of the Imperium. These weapons are devastating when properly braced and prepared for firing - more than capable of destroying smaller war engines in a single blast.

Weapons with the Ordnance (X) Special Rule double the value of a Characteristic when Stationary.

When making a Shooting Attack with a Weapon that has the Ordnance (X) Special Rule, a modifier of x2 is applied to a Characteristic if the Model with that Weapon is part of a Unit that remained stationary in the Controlling Player’s previous Movement Phase (if that Characteristic is AP, then the AP is instead changed to AP 2). The value of X in the specific variant of the Ordnance (X) Special Rule determines which Characteristic gains the x2 modifier.

Lascannon

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Lascannon
Lascannon
48
1
9
2
1
Heavy (D), Armourbane
Las
Limited (X)

Some weapons carry only a severely limited stock of munitions. Often intended as weapons of last resort, used at the correct point they can turn the tide of battle.

A Weapon with the Limited (X) Special Rule can only be used to attack a limited number of times per Battle.

A Weapon with the Limited (X) Special Rule may only be used to make attacks as part of a Shooting Attack or Combat a number of times equal to the value of X attached to the specific variant of the Special Rule. Each time it is used to make attacks, the Firepower Characteristic or Attacks Modifier Characteristic of the Weapon is not modified by this Special Rule, only the number of times it may be selected in a given Battle.

Hunter-killer missile

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Hunter-killer missile
Hunter-killer missile
48
1
9
3
3
Armourbane, Limited (1)
Missile
Smoke Launchers

Many armoured vehicles utilise countermeasure devices for protection and concealment. Whether these launch simple projectiles that surround the vehicle’s hull with concealing smoke or employ more complex payloads capable of disrupting enemy targeting devices with infra-red strobes or disruptive radiation signatures, all find use during the Age of Darkness.

A Model with smoke launchers gains the Smokescreen trait.
Armour (Front, Side, Rear) – This Characteristic will often be presented with various separate Sub-Characteristics, one for each of the Model’s Facings (see the Vehicles and Damage). Each of these Sub-Characteristics is used to determine the effect of a Model’s armour and how hard it is to defeat. When any Armour Sub-Characteristic reaches 0, then any Hit on that facing will result in an automatic Penetrating Hit without any Dice being rolled (if the Hit could have triggered a variable Special Rule, then that Rule is considered to automatically activate as part of the Hit).
Hull Points (HP) – The Hull Points Characteristic is primarily used to determine a Model with the Vehicle Type’s capacity for receiving damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Hull Points Characteristic is reduced to 0 that Model is removed from play as a Casualty, see the Rules for Destroyed Vehicles here.
Searchlights

Mounted ilium-beacons or simple electric torches, many vehicles mount some kind of portable light to aid in target identification and destruction in darkness and poor weather.

Searchlights allow attacks to ignore Shrouded Damage Mitigation Rolls.

The Target Number of any Shrouded Damage Mitigation Tests is increased by +1 (to a maximum of 6+) when making Tests as a consequence of wounds, Penetrating Hits or Glancing Hits inflicted by Shooting Attacks made by a Model that has searchlights that has Line of Sight to the Target Unit. Additionally, a Model with searchlights may not make Shrouded Damage Mitigation Tests to negate wounds, Penetrating Hits or Glancing Hits.
Hull (Arc) Mounted – Hull (Arc) Mounted Weapons will always specify a single Firing Arc and may only attack targets in that Firing Arc. The different Hull arcs are: Front, Rear, Left and Right. Some Units may specify Side as an arc - this means both Left and Right arcs.

For example, a Land Raider Carrier has a Hull (Front) Mounted twin heavy bolter - this Weapon may only attack targets in the Front Firing Arc.
Defensive Weapons – All Weapons on a Model with the Vehicle Type that have a Strength Characteristic of 6 or less are Defensive Weapons. Other Weapons may also be specifically designated as Defensive Weapons on their profile. When a Player chooses to have a Model with the Vehicle Type attack multiple different Units in the same Shooting Phase, Defensive Weapons do not have to make their attacks as Snap Shots.
Pintle Mounted – Pintle Mounted Weapons may attack targets in any Firing Arc without restriction, and are always counted as Defensive Weapons and as having the Assault Trait regardless of the Weapon’s Characteristics.

Combi-bolter

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Combi-bolter
Combi-bolter
24
4
4
5
1
-
Bolt
Militia Pintle Weapons
  • - Pintle Mounted combi-bolter
    +5 points
  • - Pintle Mounted heavy stubber
    +5 points
  • - Pintle Mounted grenade launcher
    +10 points
  • - Pintle Mounted heavy flamer
    +10 points
Turret Mounted – Turret Mounted Weapons may attack targets in any Hull arc (Front, Left, Right or Rear) without restriction.

Twin heavy flamer

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Twin heavy flamer
Twin heavy flamer
Template
1
5
4
1
Template, Panic (2)
Flame

The Smokescreen (see Smokescreen Advanced Reaction) Trait is used in the following The Imperialis Militia datasheets:

Heavy Transport
Recon
Fast Attack
Armour
Lords of War
Titan
The following Rules apply to all Models with the Titan Sub-Type:
Super-heavy

From the lumbering Baneblade tanks of the Imperial Army to the destructive power of the Legiones Astartes Falchion, all of the war machines that fall into this category are huge armour-clad constructions that each wield enough firepower to destroy an entire army.


The following Rules apply to all Models with the Super-heavy Sub-Type:
  • Models with this Sub-Type are not affected in any way by Difficult Terrain or Dangerous Terrain, but may still neither pass through nor end their move in Impassable Terrain.
  • A Model with this Sub-Type always gains any benefits for having remained Stationary when making Shooting Attacks, regardless of whether the Model moved in the preceding Movement Phase or the distance moved. This does not count if the Model has Rushed in the Preceding Movement Phase.
  • When making multiple Shooting Attacks in the same Shooting Phase, a Model with this Sub-Type does not have to make all attacks as Snap Shots.
  • A Model with this Sub-Type may only make Reactions in response to actions undertaken by Units that contain one or more Models with the Paragon Type, Super-heavy Sub-Type, Knight Sub-Type* or Titan Sub-Type*.
  • When a Player is instructed to roll on the Vehicle Damage Table for a Model with this Sub-Type, no roll is made. Instead, the Model loses a single Hull Point.
  • If a Model with this Sub-Type has a Transport Capacity, then it may transport any number of Units, so long as the number of Models in the transported Units does not exceed the Vehicle’s Transport Capacity.

*See Liber Questoris for more details on these Unit Sub-Types.
Sponson Mounted – Sponson Mounted Weapons are usually in pairs, one on each side of a Vehicle (the Model’s profile will note if this is not the case) and may attack targets in the appropriate Sponson Firing Arc (either left or right). Sponson Mounted Weapons are always counted as Defensive Weapons regardless of the Weapon’s Characteristics.
Centreline Mounted – Centreline Mounted Weapons may only attack targets in the Centreline Firing Arc.
Co-axial (X) Mounted – Co-axial Mounted Weapons will be linked to another Weapon, specified by the value of X attached to the Mount Rule. A Co-axial Mounted Weapon may only attack targets in the same Firing Arcs as the Weapon to which it is linked. Furthermore, a Co-axial Mounted Weapon must always be used to attack the same target as the Weapon to which it is linked - if it cannot then it may not be used to attack.

Demolisher cannon

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Demolisher cannon
Demolisher cannon
24
1
12
3
3
Blast (3"), Breaching (5+), Ordnance (D), Stun (1)
-

This datasheet has Lords of War Battlefield Role. Full list of The Imperialis Militia units sharing same Battlefield Role follows:

Baneblade cannon

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Baneblade cannon
Baneblade cannon
82
1
8
3
2
Blast (7"), Pinning (1)
Auto

Twin heavy bolter

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Twin heavy bolter
Twin heavy bolter
36
6
5
4
1
-
Bolt
© Vyacheslav Maltsev 2013-2026