The Imperialis Militia – Discipline Master Cadre
UNIT COMPOSITION: 1 DISCIPLINE MASTER
30 PointsPts
• Any Militia Discipline Master in this Unit may be replaced with 1 Mounted Discipline Master for +10 Points per Model.
These stern veterans are deployed throughout the Excertus Imperialis and are one of the few examples of outside Imperial officials which operate within the Imperialis Militia. Discipline Masters’ primary task is to ensure that the principles of the Imperial Truth and the manifest destiny of humanity to rule the stars are upheld. Chosen primarily from war veterans of regular Imperialis Auxilia regiments, their role is to enforce order on the battlefield according to the writ of law, inspire courage and impose the Imperial Truth on often backward and insular Militia troops to whom the Imperium may be a relatively new master.
| LD | CL | WP | IN | |||||||||||
| M | WS | BS | S | T | W | I | A | LD | CL | WP | IN | SAV | INV | |
| Discipline Master (⌀?) | 8 | 8 | 7 | 6 | ||||||||||
| Discipline Master (⌀?) | 6 | 4 | 3 | 3 | 3 | 2 | 3 | 2 | 8 | 8 | 7 | 6 | 5+ | 5+ |
| Mounted Discipline Master (⌀?) | 8 | 8 | 7 | 6 | ||||||||||
| Mounted Discipline Master (⌀?) | 12 | 4 | 3 | 3 | 3 | 2 | 3 | 2 | 8 | 8 | 7 | 6 | 5+ | 5+ |
WARGEAR
- Militia pistol
- Frag grenades
TRAITS
- [Allegiance]
- Imperialis Militia
SPECIAL RULES
- Among the Ranks
- Instil Order
- Irregulars
- Outflank (Mounted Discipline Master only)
- Bulky (2) (Mounted Discipline Master only)
- Impact (S) (Mounted Discipline Master only)
TYPE
- Discipline Master: Infantry (Command)
- Mounted Discipline Master: Cavalry (Command)
OPTIONS
- Any Model in this Unit may have its militia pistol exchanged for one item from the Militia Officer Weapons list.
- Any Model in this Unit may have one item from the Militia Officer Weapons list or one item from the Militia Melee Weapons list selected for it.
- Any Model in this Unit may have one item from the Militia Assault Weapons list selected for it.
- One Model in this Unit may have the Officer of the Line (3) Special Rule selected for it for +20 Points.
SPECIAL RULES
Among the Ranks
While organised as distinct cadres, some specialists are dispersed among rank and file troops in order to provide their expertise where it is needed most.
Models with this Special Rule are deployed and operate individually.Although included in an Army as a Unit that includes multiple Models, each Model with this Special Rule is considered to be a separate Unit for all other purposes, including Deployment and the scoring of Victory Points.
Instil Order
Discipline Masters know well the chaos that can ensue when order in the ranks breaks down. Many know that it is better for their charges to fear their bullets more than the enemy’s, and maintain discipline accordingly.
Models with this Special Rule can inflict wounds on their Unit in order to remove a Tactical Status in the Start Phase.During the Start Phase of their Turn as Active Player, the Controlling Player of a Unit which contains any Models with this Special Rule and only includes Models with the Irregulars Special Rule can select for that Unit to suffer D3 Wounds with a Damage Characteristic of 1, an AP of 2 and no Saves of any kind allowed, allocated as if they were inflicted by a Melee Attack. If they do so, a single Leadership Check or Cool Check is then made for that Unit, allowing the removal of one Tactical Status from all Models in that Unit (Pinned, Stunned or Suppressed if a Cool Check was made, or Routed if a Leadership Check was made) if it is successful.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.
In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.
While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Pistol
Compact and deadly, pistols are ideal weapons in close quarters. They lack the sheer range of larger weapons, but can be brought to bear with impressive speed and are no less deadly than their larger counterparts.
A Model may attack with two Weapons that have the Pistol Special Rule.During Step 3 of any Shooting Attack, a Player may choose to have a Model under their control make attacks with two Weapons rather than one if both Weapons have the Pistol Special Rule.
Militia pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Militia pistol | |||||||
| Militia pistol | 8 | 1 | 3 | - | 1 | Pistol | Assault |
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Breaching (X)
Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.
With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.
A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Duellist’s Edge (X)
Some weapons are designed for use in personal challenges rather than the vulgar press of battle. Often light and perfectly balanced, they provide a key edge in duels and bouts of honour.
A Weapon with the Duellist’s Edge (X) Special Rule grants a bonus to Focus Rolls in Challenges.In Step 3 of the Challenge Sub-Phase, the Focus Step, if a Player has declared that the Model under their control will use a Weapon with the Duellist’s Edge (X) Special Rule or has the Duellist’s Edge (X) Special Rule, then that Player gains a bonus equal to the value of X on the Focus Roll.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)
Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.
Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.
Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.
Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.
If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
The [Allegiance] Trait is used in the following The Imperialis Militia datasheets:
High Command
Elites
War Engine
Heavy Transport
Lords of War
The Imperialis Militia Trait is used in the following The Imperialis Militia datasheets:
High Command
Elites
War Engine
Heavy Transport
Lords of War
Infantry
Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.
Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.Command
Representing the elite of any army, commanders oversee the disposition of their troops, set strategy for the coming battle and often stand at the forefront of the conflict. The actions of such heroes can change the tide of battle in an instant.
The following Rules apply to all Models with the Command Sub-Type:- A Model with the Command Sub-Type may join and leave Units.
- A Model with the Command Sub-Type may Issue and Accept Challenges.
- The Controlling Player of a Unit that includes one or more Models with the Command Sub-Type may use the Characteristics of one of those Models to resolve any Characteristic Checks made for that Unit.
Cover Save (COV) – A Cover Save is used to negate wounds that would normally ignore or bypass an Armour Test. Few Models will have a Cover Save Characteristic, but other Rules may grant them one temporarily - such as Area Terrain. When a Model’s Cover Save is at its minimum value of ‘-’, that Model may not make Cover Tests.
Cavalry
Cavalry use their fast speed to strike deep into enemy territory and escape before their opponent is able to react. This type includes units mounted on bikes, jetbikes, land speeders and even traditional cavalry mounted on riding beasts.
The following Rules apply to all Models with the Cavalry Type:- When making a Fall Back Move for a Model with the Cavalry Type, that Model moves a distance equal to the Initiative Characteristic of the Model plus the total of two Dice rolled and added together.
- Models with the Cavalry Type may not make use of any Cover Save granted by Terrain Features or Areas of Terrain.
Irregulars
With limited military training or experience, few militia forces were truly prepared for the horrors of the Horus Heresy. Those units committed to the war for the Imperium would be forced to rely on sheer numbers to carry the day, sending wave after wave of ill-prepared and under-equipped warriors to their deaths in order to hold back the foe.
A Unit composed of Models with this Special Rule can still score Objectives when Pinned, Stunned or Suppressed, and is automatically destroyed when it Falls Back into contact with a Battlefield Edge.A Unit which is entirely composed of Models with this Special Rule (but not the Cavalry Type) is still eligible to Control or Contest an Objective Marker if it is affected by the Pinned, Stunned or Suppressed Tactical Status (in any combination), but only scores 1 Victory Point for that Objective Marker when affected by these Statuses, regardless of its value and any other Special Rules such as Line (X). While affected by any Tactical Status, Models in this Unit do not add the value of any variant of the Line (X) Special Rule they may have to their Tactical Strength when deciding if they can contest an Objective.
Additionally, when a Model from a Unit containing any Models with this Special Rule moves into Base Contact with any point on the Battlefield Edge as part of a Fall Back Move, all Models in that Unit are automatically removed as Casualties.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)
Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.
Models with the Bulky (X) Special Rule take up more space on Transport Models.A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Impact (X)
Some warriors are trained or equipped to make the most of the force of a charge. When they slam into enemy ranks, it is with the force of a thunderbolt.
On a successful Charge, a Model with the Impact (X) Special Rule temporarily increases a Characteristic by 1.If a Unit that includes any Models with the Impact (X) Special Rule or any Models that have any Weapons with the Impact (X) Special Rule, and that Unit makes a successful Charge, then this Special Rule is triggered. Once triggered, until the end of that Assault Phase, when making Melee Attacks for Models in that Unit, each Model or Weapon that is selected for one of those Models, that has a variant of this Special Rule gains a modifier of +1 to any Characteristics that is the value of X.
CHARGE – A ‘Charge’ is a special type of multi-stage move made during the Assault Sequence. Unlike a normal move, Models moved as part of any Step of a Charge may end the move in Base Contact with an enemy Model.
Outflank
Whether by stealth or sheer speed, some warriors approach the battlefield from unexpected directions. Such an attack can derail even the most well-laid plans and upend the strategies of any general, turning the tide of battle.
A Unit of Models with the Outflank Special Rule can enter play from outside of Deployment Zones.A Unit made up entirely of Models with this Special Rule that enters play from Reserves may do so from any point on the Battlefield Edge. The Unit may not enter play from any point that is within the Opposing Player’s Deployment Zone or within 7" of any enemy Model.
Note that a Unit Embarked on a Model with the Outflank Special Rule does not need to have the Outflank Special Rule in order for the Model it is Embarked upon to benefit from it. A Model that enters the Battlefield from a point outside of the Controlling Player’s Deployment Zone by means of this Special Rule, and any Units Embarked on such a Model, may not have a Charge declared for them in the Player Turn on which they enter play.
Laspistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Laspistol | |||||||
| Laspistol | 12 | 1 | 3 | - | 1 | Pistol | Assault, Las |
Bolt pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Bolt pistol | |||||||
| Bolt pistol | 12 | 1 | 4 | 5 | 1 | Pistol | Assault, Bolt |
Rending (X)
Some weapons cleave flesh with ease, inflicting terrible wounds that no mortal toughness can resist. Though of less use against armour and steel, such munitions are capable of tearing bloody holes in the ranks of advancing infantry and stalling any attack in its tracks.
With a Weapon that has the Rending (X) Special Rule, there is a chance that a Hit Test may result in an automatic wound.When any Hit Test is made for an attack with the Rending (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Rending (X) Special Rule, then if a Hit is inflicted by that Hit Test, that Hit becomes a ‘Rending Hit’.
When required to make a Wound Test for a Rending Hit, no Dice are rolled and the Wound Test succeeds automatically regardless of the Weapon’s Strength or the Target’s Toughness. The Wound Test is treated as if the result had been ‘6’ for the purposes of any Rules that would be triggered on certain results of a Wound Test. Wounds caused by a Rending Hit use the AP and Damage Characteristics of the Weapon used to make the attack and retain any Special Rules that Weapon had.
If the Target Unit for an attack made with a Weapon that has this Special Rule includes any Models with the Vehicle Type, then this Special Rule has no effect.
Shred (X)
Designed to rip and tear flesh, some weapons are fearsome and intimidating tools of warfare. Whether by the gnashing teeth of a chainblade or the jagged edges of flechette ammunition, these weapons scythe great holes in the lines of even the toughest of infantry and the largest of warriors.
Attacks made with the Shred (X) Special Rule can sometimes inflict an extra point of Damage.When any Wound Test is made for an attack with the Shred (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Shred (X) Special Rule, then if a wound is inflicted by that Wound Test, the Damage Characteristic of that wound is increased by 1. Note that the Shred (X) Special Rule may only be triggered by a Wound Test and has no effect when making an Armour Penetration Test.
Blast pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Blast pistol | |||||||
| Blast pistol | 9 | 2 | 4 | 4 | 1 | Pistol, Rending (6+), Shred (6+) | Assault, Las |
Poisoned (X)
Poison is a subtle weapon, relying not on brute strength to bring harm to the foe, hut on its own insidious bite. Though some consider it a dishonourable tool, there are many that are willing to make use of it in the name of victory.
A Weapon with the Poisoned (X) Special Rule has a chance to cause a wound regardless of the target’s Toughness.When making Wound Tests for Hits that have the Poisoned (X) Special Rule, if the result of any Dice rolled is equal to or greater than the value of X attached to the specific variant of this Special Rule then a wound is caused automatically, regardless of the Toughness Characteristic used to determine the Target Number. A Hit that has this Special Rule may still inflict a wound by passing a Wound Test as normal, instead of using this Special Rule, but never inflicts more than 1 wound if it would both pass the Wound Test and trigger the Poisoned (X) Special Rule. Wounds caused using the Poison (X) Special Rule retain the AP and Damage of the Weapon and Saving Throws and Damage Mitigation Tests may be made to discard them as normal. The Poisoned (X) Special Rule has no effect on Models that have the Vehicle Type, and limited effect on Models with the Automata or Walker Types.
Pinning (X)
The crack of the sniper’s rifle or the burst of heavy artillery, both signal a sudden and indiscriminate death and send infantry scurrying for cover. Such weapons are meant as much to pin the foe in place as to kill them, breaking up advancing ranks of troops and shattering defensive formations.
Weapons and other attacks that have the Pinning (X) Special Rule have a chance of inflicting the Pinned Status on the Target Unit.If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Pinned Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.
Needle pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Needle pistol | |||||||
| Needle pistol | 12 | 2 | 2 | - | 1 | Poisoned (3+), Pistol, Pinning (1) | Assault, Needle |
Template
Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.
Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.
Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.
Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.
Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.
OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.
An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.
An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Hand flamer
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Hand flamer | |||||||
| Hand flamer | Template | 1 | 3 | - | 1 | Template, Pistol | Assault, Flame |
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Overload (X)
Some weapons are almost as dangerous to the wielder as to the foe. Supercharged powerpacks can explode in combat or volatile munitions can jam or even detonate, all of which can prove deadly to those charged with deploying such weapons.
Weapons with this Special Rule may inflict Hits on the Models making Shooting Attacks with them.When the Controlling Player declares that attacks will be made for a Model using a Weapon or profile that has the Overload (X) Special Rule, any Hit Tests made for those attacks that result in a number that is equal to or less than the value of X attached to the variant of the Overload Special Rule that the Weapon had, before any modifiers are applied to the roll, are Misfires.
For Weapons that do not make Hit Tests, such as Weapons with the Template Special Rule, instead roll a number of dice equal to the Firepower Characteristic of the Weapon used to make the attack after the attack has been declared and the number of Models hit is determined. Each Dice that results in a number equal to or less than the value of X attached to the variant of the Overload Special Rule that the Weapon had creates a Misfire. This does not affect the number of Hits on the Target Unit created by this attack.
For each Misfire, the Unit for which the Hit Tests were made suffer a Hit - these Hits must form a new Fire Group or Strike Group, referred to as the ‘Misfire Group’.
Once the current Shooting Attack and any Reactions triggered by it have been fully resolved, the Misfire Group must be resolved. A Misfire Group is resolved in the same way as any other Fire Group or Strike Group, using the Profile of the Weapon used for the Fire Group or Strike Group it was created from. Wounds, Glancing Hits or Penetrating Hits from this Misfire Group are allocated by the Controlling Player, and must be allocated to a Model that made attacks as part of the Fire Group or Strike Group that generated the Misfire Group. If a Hit from a Misfire Group is generated by an attack made by a Model with the Vehicle Type, then it is resolved against the lowest Armour Value from all of the Model’s facings.
Hits, wounds or Casualties inflicted upon a Unit as a result of this Special Rule do not cause Leadership or Cool Checks, and Hits inflicted as part of a Misfire Group do not trigger any Special Rules that take effect as a result of a certain value on a Hit Test.
Plasma pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Plasma pistol | |||||||
| Plasma pistol | |||||||
| - Sustained fire | |||||||
| - Sustained fire | 12 | 1 | 6 | 4 | 1 | Pistol, Breaching (6+) | Assault, Plasma |
| - Maximal fire | |||||||
| - Maximal fire | 12 | 1 | 7 | 4 | 1 | Pistol, Breaching (5+), Overload (1) | Assault, Plasma |
Charnabal Weapons
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Charnabal sabre | |||||||
| Charnabal sabre | +1 | A | S | - | 1 | Breaching (6+), Duellist’s Edge (1) | Charnabal |
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Charnabal tabar | |||||||
| Charnabal tabar | I | A | +1 | - | 1 | Breaching (6+), Duellist’s Edge (1) | Charnabal |
Power Weapons
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Power Weapons | |||||||
| Power Weapons | |||||||
| - Power sword | |||||||
| - Power sword | I | A | S | 3 | 1 | Breaching (6+) | Power |
| - Power axe | |||||||
| - Power axe | -1 | A | +1 | 3 | 1 | Breaching (5+) | Power |
| - Power maul | |||||||
| - Power maul | -1 | A | +2 | 3 | 1 | Breaching (6+) | Power |
| - Power lance | |||||||
| - Power lance | +1 | A | S | 3 | 1 | Precision (6+) | Power |
Power fist
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Power fist | |||||||
| Power fist | -3 | A | +4 | 2 | 2 | - | Power |
Militia Officer Weapons
- - Militia pistolFree
- - Laspistol+1 points
- - Bolt pistol+2 points
- - Blast pistol+3 points
- - Needle pistol+5 points
- - Hand flamer+5 points
- - Plasma pistol+5 points
- - Charnabal weapon+5 points
- - Power weapon+10 points
- - Power fist+15 points
Close combat weapon
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Close combat weapon | |||||||
| Close combat weapon | I | A | S | - | 1 | - | - |
Chainsword
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Chainsword | |||||||
| Chainsword | I | A | S | 5 | 1 | Shred (6+) | Chain |
Chainaxe
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Chainaxe | |||||||
| Chainaxe | -1 | A | +1 | 5 | 1 | Shred (6+) | Chain |
Army List
Datasheets collatedHigh Command
Elites
Heavy Assault
Troops
Support
War Engine
Heavy Transport
Recon
Lords of War
Faction Rules
• Wargear
This datasheet has Command Battlefield Role. Full list of The Imperialis Militia units sharing same Battlefield Role follows:
Frag Grenades
This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.
Frag grenades can be used to make attacks during the Volley Step.When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Frag Grenades | |||||||
| Frag Grenades | 6 | 1 | 3 | 6 | 1 | Blast (3") | Assault |
Among the Ranks
While organised as distinct cadres, some specialists are dispersed among rank and file troops in order to provide their expertise where it is needed most.
Models with this Special Rule are deployed and operate individually.Although included in an Army as a Unit that includes multiple Models, each Model with this Special Rule is considered to be a separate Unit for all other purposes, including Deployment and the scoring of Victory Points.
Instil Order
Discipline Masters know well the chaos that can ensue when order in the ranks breaks down. Many know that it is better for their charges to fear their bullets more than the enemy’s, and maintain discipline accordingly.
Models with this Special Rule can inflict wounds on their Unit in order to remove a Tactical Status in the Start Phase.During the Start Phase of their Turn as Active Player, the Controlling Player of a Unit which contains any Models with this Special Rule and only includes Models with the Irregulars Special Rule can select for that Unit to suffer D3 Wounds with a Damage Characteristic of 1, an AP of 2 and no Saves of any kind allowed, allocated as if they were inflicted by a Melee Attack. If they do so, a single Leadership Check or Cool Check is then made for that Unit, allowing the removal of one Tactical Status from all Models in that Unit (Pinned, Stunned or Suppressed if a Cool Check was made, or Routed if a Leadership Check was made) if it is successful.
Heavy (X)
Some weapons are so heavy that, while they can be fired on the move, are more powerful when properly braced and made ready before shooting. Warriors on the battlefield must use their judgement to decide when speed is required and when the full firepower of their arsenal must be unleashed.
Weapons with the Heavy (X) Special Rule gain +1 to a Characteristic when Stationary.When making a Shooting Attack with a Weapon that has the Heavy (X) Special Rule, a modifier of +1 is added to a Characteristic if the Model with that Weapon is part of a Unit that remained Stationary in the Controlling Player’s previous Movement Phase. If the Characteristic listed is AP, then instead it improves the AP by one Step (see the Rules for modifying Saves and AP). The value of X in the specific variant of the Heavy (X) Special Rule determines which Characteristic gains the +1 modifier.
Militia rifle
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Militia rifle | |||||||
| Militia rifle | 24 | 1 | 3 | - | 1 | Heavy (FP) | - |
Militia carbine
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Militia carbine | |||||||
| Militia carbine | 18 | 1 | 3 | - | 1 | - | Assault |
Militia shotgun
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Militia shotgun | |||||||
| Militia shotgun | 8 | 1 | 4 | - | 1 | - | Assault |
Las-lock
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Las-lock | |||||||
| Las-lock | 18 | 1 | 4 | 6 | 1 | - | Las |
Lasrifle
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Lasrifle | |||||||
| Volley | 30 | 1 | 3 | 6 | 1 | Heavy (FP) | Las |
Bolter
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Bolter | |||||||
| Bolter | 24 | 2 | 4 | 5 | 1 | - | Bolt |
Militia Assault Weapons
- - Militia rifleFree
- - Militia carbineFree
- - Militia shotgunFree
- - Las-lock+1 points
- - Lasrifle+1 points
- - Bolter+3 points
| COMMAND – The line officers of an Army. |
Officer of the Line (X)
Some officers are not renowned for their skills in combat or for the great glories they have won, but rather for their steadfast leadership and skill in logistics. Often unassuming and under-appreciated, it is these warriors that hold the armies of the Imperium together and only the most foolish general will overlook them in favour of more vainglorious officers.
Models with this Special Rule allow more Auxiliary Detachments to be included in an Army.If a Model with this Special Rule is selected to fill a Command Slot in any Detachment in the Crusade Force Organisation Chart, then the Controlling Player may select a number of Auxiliary Detachments equal to the value of X in the specific variant of this Special Rule instead of just one.
Player
A Player is the actual person moving Models and making rolls, the Player of the game. Battles will include more than one Player, and the Rules will often refer to the Active Player (the Player currently taking their Player Turn) and the Reactive Player (the Player not currently taking their Player Turn, and thus only allowed to interact with the game through Reactions) in order to differentiate between them. Sometimes the Rules will also refer to the Controlling Player, that is the Player that Controls the Unit, Model or other game element the Rule is referring to.
Characteristic Checks
The most common type of Check is the Characteristic Check, often separately named for the Characteristic to be checked (e.g., Leadership Check, Intelligence Check, Cool Check or Willpower Check).When a Characteristic Check is made for an individual Model, then the Target Number for the Check is always equal to the value of the Characteristic of the same name possessed by the Model. For example, the Target Number of a Willpower Check made for a Model with Willpower 7 would be 7.
When a Characteristic Check is made for a Unit rather than an individual Model, the Target Number for the Check is equal to the value of the Characteristic of the same name possessed by the Model with the lowest Characteristic of the same name in the Unit. For example, the Target Number of a Leadership Check made for a Unit that includes Models with Leadership Characteristics of 6, 8 and 10 would be 6 - the lowest of the available Characteristic values. Note that if the Unit includes a Model with the Sergeant or Command Sub-Types then that Model’s Characteristic may always be used instead of any other Model’s.
In most cases if a Check is passed then there is no further effect, while failure will often result in the Model for which the Check is made being affected by the Rule which called for the Check. Unlike Tests, Checks must be rolled one at a time and should not be rolled in batches in order to avoid confusion over which Dice refer to which Check.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
Pursue – Roll a single Dice for each Unit that has been chosen to Pursue. Each Model in a Pursuing Unit must move a number of inches equal to their Initiative Characteristic, added to the result of the Dice rolled for the Unit that Model is part of, directly towards the nearest enemy Model from a Unit that has made a Fall Back Move from the selected Combat. If any Model from the Unit that is Pursuing ends its move in Base Contact with an enemy Model, then it is considered to have made a successful Charge and is Locked in Combat with the Unit that includes that enemy Model.
In the example pictured above the Unit marked in green has beaten the Unit marked in yellow. The yellow marked Unit has Fallen Back, while the green marked Unit will Pursue. The red marked Unit was not a part of the Combat. All Models in the green marked Unit must move directly towards Models in the yellow marked Unit when making their Pursue Move and cannot move towards Models in the red Marked Unit even though it is closer.
Hold – All Models in a Unit that Holds must make an immediate Pile-in Move and if any of its Models are in Base Contact with an enemy Model, the Unit remains Locked in Combat.
Disengage – A Unit that Disengages must make an immediate Disengage Move. To make a Disengage Move, the Controlling Player of the Unit must move each Model in the Unit a distance equal to the Model’s Movement Characteristic. This move can be made in any direction, as long as each Model moving is moving away from any enemy Models that are part of the Combat the Model is Disengaging from. If the Model cannot move without moving closer to such an enemy Model then a Disengage Move may not be made for the Unit that Model belongs to and the Unit must instead Hold (see above). Each Model moved must end its move in Unit Coherency with at least one other Model from the same Unit and may not end the move in Base Contact with any enemy Model. If, for any reason, a Unit ends a Disengage Move with any Models in that Unit out of Unit Coherency or in Base Contact with an enemy Model, then all Models in the Unit gain the Routed Status.
Models making a Disengage move can freely move through all enemy Models that are Locked in the same Combat. This is an exception to the normal Rules for moving that state a Model cannot move through any area within 1" of an enemy Model or any Model Locked in Combat. If any Models making a Disengage Move from a Combat would end their move less than 2" from an enemy Model still Locked in that Combat, extend the Disengage move by the minimum amount needed for that Model to end its Move more than 2" from any enemy Model. Models making a Disengage Move have the distance they Move reduced as normal by Terrain and must take Dangerous Terrain Tests as normal.
Models making a Disengage move can freely move through all enemy Models that are Locked in the same Combat. This is an exception to the normal Rules for moving that state a Model cannot move through any area within 1" of an enemy Model or any Model Locked in Combat. If any Models making a Disengage Move from a Combat would end their move less than 2" from an enemy Model still Locked in that Combat, extend the Disengage move by the minimum amount needed for that Model to end its Move more than 2" from any enemy Model. Models making a Disengage Move have the distance they Move reduced as normal by Terrain and must take Dangerous Terrain Tests as normal.
Pinned
The Pinned Status is primarily inflicted as part of the effects of the Pinning (X) Special Rule, but may also be applied by specific Special Rules.
The following Rules apply to any Unit that includes one or more Models that have the Pinned Status:
- The Controlling Player of a Unit that includes any Models that are Pinned may not choose to have that Unit move, Rush or Charge in any Phase and any effect that would force them to move or Charge has no effect.
- A Unit that includes any Models with the Pinned Status that is Locked in Combat makes any Pile-in Moves as normal, but may not choose to Pursue or Disengage during the Resolution Sub-Phase.
Stunned
The Stunned Status is primarily inflicted as part of the effects of the Stun (X) Special Rule, but may also be applied by specific Special Rules.
The following Rules apply to any Unit that includes one or more Models that have the Stunned Status:
- The Controlling Player of a Unit that includes any Models that are Stunned may not declare any Reactions for that Unit.
Suppressed
The Suppressed Status is primarily inflicted as part of the effects of the Suppressive (X) Special Rule, but may also be applied by specific Special Rules.
The following Rules apply to any Unit that includes one or more Models that have the Suppressed Status:
- The Controlling Player of a Unit that includes any Models that are Suppressed must make all attacks in any Shooting Attacks declared for that Unit as Snap Shots.
Routed
The Routed Status can be inflicted by any of the following:
- As part of the effects of the Panic (X) Special Rule.
- If a Unit has had 25% or more of the Models that were part of that Unit at the start of a Shooting Attack Removed as Casualties due to that Shooting Attack, then the Controlling Player must pass a Leadership Check for that Unit or it gains the Routed Status (see the Rules for Panic in the Morale Sub-Phase
- The Controlling Player of a Unit that loses Combat must take a Leadership Check for that Unit in the Resolution Sub-Phase and if the Check is failed then the Unit gains the Routed Status.
- Other Rules may also apply the Routed Status, these Rules will specify how and when this occurs.
The following Rules apply to any Unit that includes one or more Models that have the Routed Status:
- The Controlling Player of a Unit that includes any Models that are Routed must make all Shooting Attacks for that Unit as Snap Shots.
- The Controlling Player of a Unit that includes any Models that are Routed may not declare any Reactions for that Unit.
- A Unit with the Routed Status may not move in the Move Sub-Phase of the Movement Phase - any effect that would force them to move or Rush in the Movement Phase has no effect.
- In the Rout Sub-Phase of the Movement Phase, a Unit that includes any Models with the Routed Status must Fall Back.
- Any Models that have the Routed Status and move into contact with any point on the Battlefield Edge that is within the Controlling Player’s Deployment Zone stop moving, and any Models that have the Routed Status and begin the Rout Sub-Phase in contact with any point on the Battlefield Edge that is within the Controlling Player’s Deployment Zone remain Stationary.
- If a Unit that includes one or more Models with the Routed Status enters contact with an edge of the Battlefield within the Controlling Player’s Deployment Zone as part of a Fall Back Move, a Leadership Check must be made for that Unit once all Models in the Unit have completed their moves. If that Leadership Check is failed, then all Models in the Unit are immediately removed from play as Casualties. However, if that Leadership Check is passed then the Unit remains in play and all Models in the Unit lose the Routed Status, but gain the Suppressed Status.
- In the Assault Phase Charges may not be declared for a Unit that includes any Models with the Routed Status and any Rule or effect that would otherwise force such a Unit to make a Charge has no effect.
- A Unit that includes any Models with the Routed Status in the Resolution Sub-Phase of the Assault Phase must always Fall Back at the end of that Sub-Phase.
Designer’s Note
Astute readers will have noted that a Unit under the Reactive Player’s control that loses Combat and gains the Routed Status will be forced to Fall Back from that Combat and will then have to Fall Back a second time in the Controlling Player’s following Movement Phase. This is entirely intentional, and is intended to avoid Units ‘ping-ponging’ in and out of Combat. Players whose Units have been Routed will benefit from the fact that they must halt at the Battlefield Edge, stopping them running to their doom, and the fact that being attacked while Routed does not result in the immediate removal of the Routed Unit, nor stop them from shooting. Furthermore, the various Liber books will present additional options and Wargear that will allow Players the opportunity to mitigate or remove Statuses outside of the Statuses Sub-Phase.
Astute readers will have noted that a Unit under the Reactive Player’s control that loses Combat and gains the Routed Status will be forced to Fall Back from that Combat and will then have to Fall Back a second time in the Controlling Player’s following Movement Phase. This is entirely intentional, and is intended to avoid Units ‘ping-ponging’ in and out of Combat. Players whose Units have been Routed will benefit from the fact that they must halt at the Battlefield Edge, stopping them running to their doom, and the fact that being attacked while Routed does not result in the immediate removal of the Routed Unit, nor stop them from shooting. Furthermore, the various Liber books will present additional options and Wargear that will allow Players the opportunity to mitigate or remove Statuses outside of the Statuses Sub-Phase.