Datasheets
Army List
Datasheets collated
Heavy Assault
• Ruinstorm Daemon Brutes
Fast Attack
• Ruinstorm Daemon Riders
Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Daemons of the Ruinstorm – Ruinstorm Daemon Riders

This datasheet does not meet the selection criteria (see Settings tab).
Ruinstorm Daemon Riders
UNIT COMPOSITION: 6 DAEMON RIDERS
150 PointsPts
• May include up to 6 additional Daemon Riders at +15 Points per Model.

Some Daemons take forms that appear as a parody of the cavalry of ancient mortal armies or that are reminiscent of centaur myths. These often harry the flanks of the enemy, running down isolated foes while the bulk of the enemy force is preoccupied with the Daemon horde. The cavalry of the Daemon hosts is as varied as its foot soldiers, from lithe and swift coursers to vast plodding juggernauts, centaur-like creatures and lesser Daemons riding armoured monstrosities. Regardless of appearance, they are swift and deadly, often emerging from the Warp and striking before their foe is ready.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Daemon Rider (⌀60mm Round/90mm Oval) 7 8 7 5
Daemon Rider (⌀60mm Round/90mm Oval) 12 4 3 4 4 2 4 3 7 8 7 5 4+ 5+
WARGEAR
  • Daemon claws
TRAITS
  • Traitor
  • [Ætheric Dominion]
SPECIAL RULES
  • Bulky (2)
  • Fear (1)
  • Vanguard (3)
  • Impact (I)
TYPE
  • Cavalry (Malefic)
OPTIONS
  • Any Model in this Unit may have its daemon claws exchanged for one infernal blade for +1 Point per Model.
  • Any Model in this Unit may have its daemon claws exchanged for one infernal lance for +1 Point per Model.
  • Every Model in the Unit can be given immaterial projectiles for +2 Points per Model.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.

The Traitor Trait is used in the following Daemons of the Ruinstorm datasheets:

Heavy Assault
Fast Attack
Lords of War
• Samus

The [Ætheric Dominion] Trait is used in the following Daemons of the Ruinstorm datasheets:

High Command
Command
Heavy Assault
Troops
Support
War Engine
Recon
Fast Attack
Malefic

Infused with the energies of the Warp and unbound by the normal laws of reality, these creatures ignore mortal concerns. While the ӕther is the source of their strength, when it wanes, such warriors find their forms weakening or even dissolving entirely.

The following Rules apply to all Models with the Malefic Sub-Type:
  • When a Unit composed entirely of Models with the Malefic Sub-Type would gain a Tactical Status of any kind, that Tactical Status is not applied to the Models in the Unit, but instead the Unit suffers D3 automatic wounds with an AP of 2 and a Damage Characteristic of 1 against which no Saving Throws of any kind may be made. Once these wounds are resolved, no Tactical Status is applied to any Model in the Unit.
  • Models with the Malefic Sub-Type are not affected by Special Rules that negatively modify their Leadership, Cool, Willpower or Intelligence Characteristics.
  • No Model that does not also have the Malefic Sub-Type may join or be joined by a Unit that includes one or more Models with the Malefic Sub-Type.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Fear (X)

Some warriors exude such a terrifying aura that even those hardened by war and death are apprehensive in their presence. Whether this is due to a reputation for cruelty or brutal slaughter or the result of some technological device or psychic glamour makes little difference in the effect it has on the battlefield. Wise commanders will seek to keep their distance and engage such fearsome enemies at range rather than risk their wrath.

Models near an enemy Model with the Fear (X) Special Rule must reduce their Advanced Characteristics.

When any Model from a Unit is within 12" of an enemy Model with the Fear (X) Special Rule, all Models in that Unit must reduce their Leadership, Willpower, Cool and Intelligence Characteristics by the value of X. This negative modifier is removed as soon as no Models in a given Unit are within 12" of any Model with the Fear (X) Special Rule. If a Unit would be affected by multiple instances of the Fear (X) Special Rule, the value of X is not stacked and instead the single highest value is used as a negative modifier.
Army List
Datasheets collated
Heavy Assault
• Ruinstorm Daemon Brutes
Fast Attack
• Ruinstorm Daemon Riders
Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus
Faction Rules
• The Warp at War: Building a Daemons of the Ruinstorm Army
• Ætheric Dominions
• Special Rules
• Wargear
• Armoury of the Ruinstorm Daemons

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Breaching (X)

Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.

With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.

When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.

A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Shred (X)

Designed to rip and tear flesh, some weapons are fearsome and intimidating tools of warfare. Whether by the gnashing teeth of a chainblade or the jagged edges of flechette ammunition, these weapons scythe great holes in the lines of even the toughest of infantry and the largest of warriors.

Attacks made with the Shred (X) Special Rule can sometimes inflict an extra point of Damage.

When any Wound Test is made for an attack with the Shred (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Shred (X) Special Rule, then if a wound is inflicted by that Wound Test, the Damage Characteristic of that wound is increased by 1. Note that the Shred (X) Special Rule may only be triggered by a Wound Test and has no effect when making an Armour Penetration Test.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
Impact (X)

Some warriors are trained or equipped to make the most of the force of a charge. When they slam into enemy ranks, it is with the force of a thunderbolt.

On a successful Charge, a Model with the Impact (X) Special Rule temporarily increases a Characteristic by 1.

If a Unit that includes any Models with the Impact (X) Special Rule or any Models that have any Weapons with the Impact (X) Special Rule, and that Unit makes a successful Charge, then this Special Rule is triggered. Once triggered, until the end of that Assault Phase, when making Melee Attacks for Models in that Unit, each Model or Weapon that is selected for one of those Models, that has a variant of this Special Rule gains a modifier of +1 to any Characteristics that is the value of X.

Daemon claws

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Daemon claws
Daemon claws
I
A
S
5
1
Shred (5+)
Immaterial

Infernal blade

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Infernal blade
Infernal blade
I
-1
S
4
1
Breaching (6+)
Immaterial
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).

Immaterial projectiles

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Immaterial projectiles
Immaterial projectiles
18
1
4
5
1
-
Assault, Immaterial
Cover Save (COV) – A Cover Save is used to negate wounds that would normally ignore or bypass an Armour Test. Few Models will have a Cover Save Characteristic, but other Rules may grant them one temporarily - such as Area Terrain. When a Model’s Cover Save is at its minimum value of ‘-’, that Model may not make Cover Tests.
Cavalry

Cavalry use their fast speed to strike deep into enemy territory and escape before their opponent is able to react. This type includes units mounted on bikes, jetbikes, land speeders and even traditional cavalry mounted on riding beasts.

The following Rules apply to all Models with the Cavalry Type:
  • When making a Fall Back Move for a Model with the Cavalry Type, that Model moves a distance equal to the Initiative Characteristic of the Model plus the total of two Dice rolled and added together.
  • Models with the Cavalry Type may not make use of any Cover Save granted by Terrain Features or Areas of Terrain.
Vanguard (X)

Warriors trained to break the foe’s lines are often at the forefront of their host, but are ill-suited to holding ground in the face of an enemy counter-attack.

A Unit that includes Models with this Special Rule scores fewer Victory Points for controlling Objectives, but can score Victory Points for destroying enemy Units that hold Objectives.

A Unit that includes a majority of Models with the Vanguard (X) Special Rule may only ever score 1 Victory Point for Controlling an Objective, regardless of that Objective’s value. However, the Player that controls a Unit that includes a majority of Models with the Vanguard (X) Special Rule gains Victory Points equal to the value of X in the Vanguard (X) Special Rule, in addition to any Victory Points scored for controlling an Objective, whenever either of the following two statuses are fulfilled:
  • If an attack made for a Unit that includes a majority of Models with the Vanguard (X) Special Rule causes the last Model in an enemy Unit that is Controlling or Contesting an Objective to be Removed as a Casualty.
  • If a Unit that includes a majority of Models with the Vanguard (X) Special Rule has at least one attack made for it in a Combat that results in one or more enemy Units that had at least one Model within 3" of an Objective at the start of that Assault Phase either Falling Back from Combat or being Massacred.

Note that the Vanguard (X) Special Rule may only be used to score Victory Points once per Objective per Player Turn - no matter how many enemy Units were Controlling or Locked in Combat near that Objective.

This datasheet has Fast Attack Battlefield Role. Full list of Daemons of the Ruinstorm units sharing same Battlefield Role follows:

Fast Attack
• Ruinstorm Daemon Riders

Infernal lance

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Infernal lance
Infernal lance
+1
1
S
4
1
Breaching (6+)
Immaterial
© Vyacheslav Maltsev 2013-2026