Datasheets
Army List
Datasheets collated
Heavy Assault
• Ruinstorm Daemon Brutes
Fast Attack
• Ruinstorm Daemon Riders
Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Daemons of the Ruinstorm – Ka’bandha

This datasheet does not meet the selection criteria (see Settings tab).
Ka’bandha
UNIT COMPOSITION: 1 KA’BANDHA
600 PointsPts

Of all the dark legends spawned during the Age of Darkness, Ka’bandha casts a vast shadow that looms across history. This bat-winged terror, clad in impenetrable bronze plate and capable of cleaving a dozen men with each swing of its hell-forged weapons, has brought about the end of dozens of worlds, scouring them clean with fire and fury. Whether conjured forth by an ambitious summoner or torn free from the Warp of its own volition, time and again Ka’bandha unleashed fury and hatred upon the Imperium, and though repulsed each time, the cost in lives and ruined worlds will never be cheap.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Ka’bandha (⌀170 x 109mm) 12 10 10 6
Ka’bandha (⌀170 x 109mm) 12 8 5 8 8 8 6 7 12 10 10 6 3+ 4+
WARGEAR
  • Armaments of Ka’bandha
TRAITS
  • Traitor
  • Champion of the Ruinstorm
  • Heedless Slaughter
SPECIAL RULES
  • Bulky (12)
  • Eternal Warrior (2)
  • Fear (2)
  • Primal Terror
TYPE
  • Paragon (Unique, Antigrav, Malefic)
WARGEAR

Armaments of Ka’bandha

The panoply of Ka’bandha is in effect little more than an extension of the physical manifestation that is the Daemon itself, taking the form of an immense, arcane axe and a viciously barbed lash of sinew and iron.

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Baneaxe
Baneaxe
I
A
S
2
2
Critical Hit (5+)
Immaterial

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
lronlash
lronlash
6
5
8
3
2
-
Assault, Immaterial
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.

The Traitor Trait is used in the following Daemons of the Ruinstorm datasheets:

Heavy Assault
Fast Attack
Lords of War
• Samus
Additional Reaction Point
If an Army’s Primary Detachment is from the Daemons of the Ruinstorm Army List, the Controlling Player gains one additional Reaction Point if that Detachment or a Lord of War Detachment from the same Army List includes any Models with the Champion of the Ruinstorm Trait.

The Champion of the Ruinstorm Trait is used in the following Daemons of the Ruinstorm datasheets:

High Command
Lords of War
• Samus
Malefic

Infused with the energies of the Warp and unbound by the normal laws of reality, these creatures ignore mortal concerns. While the ӕther is the source of their strength, when it wanes, such warriors find their forms weakening or even dissolving entirely.

The following Rules apply to all Models with the Malefic Sub-Type:
  • When a Unit composed entirely of Models with the Malefic Sub-Type would gain a Tactical Status of any kind, that Tactical Status is not applied to the Models in the Unit, but instead the Unit suffers D3 automatic wounds with an AP of 2 and a Damage Characteristic of 1 against which no Saving Throws of any kind may be made. Once these wounds are resolved, no Tactical Status is applied to any Model in the Unit.
  • Models with the Malefic Sub-Type are not affected by Special Rules that negatively modify their Leadership, Cool, Willpower or Intelligence Characteristics.
  • No Model that does not also have the Malefic Sub-Type may join or be joined by a Unit that includes one or more Models with the Malefic Sub-Type.
Antigrav

Whether equipped with antigrav repulsors or empowered by some esoteric, psychic art, this unit is able to skim above the ground. While incapable of true flight, this does allow it to avoid any of the hampering effects of the prevailing terrain, gliding over obstacles that would ensnare or entangle more conventional troops.

The following Rules apply to all Models with the Antigrav Sub-Type:
  • A Unit that includes only Models with the Antigrav Sub-Type may ignore the effects of any and all Terrain it passes over during movement, including passing over Impassable Terrain without penalty or restriction. However, such Units may not begin or end their movement in Impassable Terrain, and if beginning or ending their movement in Dangerous Terrain must take Dangerous Terrain Tests as normal.
  • A Unit that includes only Models with the Antigrav Sub-Type may ignore both friendly and enemy Models and Units when moving. However, when moving over a friendly Unit all Models with the Antigrav Sub-Type must end their move at least 1" away from all Models that are not part of the same Unit, or if moving over an enemy Unit, must end their move at least 1" away from any enemy Model.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Eternal Warrior (X)

Some warriors are either so preternaturally tough, so bitterly intransigent or so favoured by fortune that they can survive almost any attack. Devastating close combat strikes and huge explosions all fail to bring down this warrior in a single hit and only repeated attacks can end their rampage.

A Model with this Special Rule takes less Damage from attacks.

When a Model with the Eternal Warrior (X) Special Rule is allocated an Unsaved Wound, the Damage of the Unsaved Wound is reduced by the value of X attached to the specific variant of the Eternal Warrior (X) Special Rule. The effects of this Special Rule cannot reduce the Damage of an Unsaved Wound to less than 1, regardless of the value of X.
Fear (X)

Some warriors exude such a terrifying aura that even those hardened by war and death are apprehensive in their presence. Whether this is due to a reputation for cruelty or brutal slaughter or the result of some technological device or psychic glamour makes little difference in the effect it has on the battlefield. Wise commanders will seek to keep their distance and engage such fearsome enemies at range rather than risk their wrath.

Models near an enemy Model with the Fear (X) Special Rule must reduce their Advanced Characteristics.

When any Model from a Unit is within 12" of an enemy Model with the Fear (X) Special Rule, all Models in that Unit must reduce their Leadership, Willpower, Cool and Intelligence Characteristics by the value of X. This negative modifier is removed as soon as no Models in a given Unit are within 12" of any Model with the Fear (X) Special Rule. If a Unit would be affected by multiple instances of the Fear (X) Special Rule, the value of X is not stacked and instead the single highest value is used as a negative modifier.
Army List
Datasheets collated
Heavy Assault
• Ruinstorm Daemon Brutes
Fast Attack
• Ruinstorm Daemon Riders
Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus
Faction Rules
• The Warp at War: Building a Daemons of the Ruinstorm Army
• Ætheric Dominions
• Special Rules
• Wargear
• Armoury of the Ruinstorm Daemons

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Critical Hit (X)

Whether by dint of superior skill or exemplary wargear, some warriors are better able to place strikes on enemy weak points. Such attacks can fell even the most powerful foes with a single well-placed shot.

Attacks made with the Critical Hit (X) Special Rule have a chance to automatically cause a wound and inflict 1 extra point of Damage.

When any Hit Test is made for an attack with the Critical Hit (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Critical Hit (X) Special Rule, then if a Hit is inflicted by that Hit Test, that Hit becomes a ‘Critical Hit’.

A Critical Hit automatically inflicts a wound without any Dice being rolled, counting as the roll of a ‘6’ for any variable Special Rules that might be triggered by a Wound Test, and increases the Damage Characteristic of the Hit by +1.
CHARGE – A ‘Charge’ is a special type of multi-stage move made during the Assault Sequence. Unlike a normal move, Models moved as part of any Step of a Charge may end the move in Base Contact with an enemy Model.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Primal Terror

Monstrous daemonic beings manifested in the physical realm as nightmares given form, stirring the deepest feelings of dread and horror in the minds of all who looked upon them. Even the mightiest champions of the Imperium take pause when faced with such a foe and lesser warriors are often paralysed with fear.

Opposing Units must make Leadership Checks when making a Reaction triggered by, or a Charge targeting a Model with this Special Rule.

When a Unit with a Model with the Primal Terror Special Rule is declared as the Target Unit of a Charge or as the Target Unit of a Reaction or Advanced Reaction, the Controlling Player of the Unit the Charge or Reaction is declared for must make a Leadership Check. If the Leadership is passed, the Charge or Reaction is resolved as normal. If the Check is failed, the Unit for which the Charge or Reaction was declared for immediately gains the Stunned Status and the Controlling Player may not declare another Charge or Reaction for that Unit during this Phase, but their remaining Reaction Allotment is not reduced.

This datasheet has Lords of War Battlefield Role. Full list of Daemons of the Ruinstorm units sharing same Battlefield Role follows:

Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus

Armaments of Ka’bandha

The panoply of Ka’bandha is in effect little more than an extension of the physical manifestation that is the Daemon itself, taking the form of an immense, arcane axe and a viciously barbed lash of sinew and iron.

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Baneaxe
Baneaxe
I
A
S
2
2
Critical Hit (5+)
Immaterial

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
lronlash
lronlash
6
5
8
3
2
-
Assault, Immaterial
Heedless Slaughter

The dark fury of battle and the red joy of life’s final end. For some among the hordes of the Warp, their only goal was to fight and to die - it mattered not where or why as long as blood flowed. Such vile entities would appear garbed in the trappings of conquerors and executioners, caring only for the tally of skulls and death they might reap from the mortal world, irrespective of such concerns as ‘friend’ or ‘foe’

A Model with this Trait gains the Desecrators Special Rule. Additionally, any Unit that contains at least one Model with this Trait can never be the Focus nor the Target of a Psychic Blessing or Psychic Curse.
Paragon

Mightiest of all the Emperor’s creations and the greatest warriors and generals of their age, the Primarchs of the Space Marine Legions epitomise the dark ages of the Horus Heresy. These colossi of war were powerful beyond the capabilities of any mortal warrior or steel-forged automata - for their only equal was another of their own kind.

The following Rules apply to all Models with the Paragon Type:
  • Any Hits inflicted by a Model with the Paragon Type, as part of either Shooting Attacks or in close combat, are allocated by the attacking Model’s Controlling Player and not the Controlling Player of the Target Unit.
  • Models with the Paragon Type may join and leave a Unit that includes Models with the Infantry Type, and Models with the Infantry Type may join and leave a Unit that includes one or more Models with the Paragon Type.
  • Models with the Paragon Type may Embark and Disembark upon Models with the Transport Sub-Type.
  • A Model with the Paragon Type may Issue and Accept Challenges.
  • The Controlling Player of a Unit that includes one or more Models with the Paragon Type may use the Characteristics of one of those Models to resolve any Characteristic Checks made for that Unit.
  • In Step 1 of the Resolution Sub-Phase, when deciding how many Models a Player controls in a Combat, a Model with the Paragon Type counts as a number of Models equal to that Model’s Base Wounds Value.
Unique

Among the warriors and war machines of the Horus Heresy there are many whose names are known throughout the galaxy. Such heroes, prototypes and icons are rare, and though their power can tip any battle in their favour, they can only be in one place at a time.

The following Rules apply to all Models with the Unique Sub-Type:
  • An Army may not include more than a single instance of a given Model with this Sub-Type. For example, if Model A and Model B both have the Unique Sub-Type then a single Army could include one of Model A and one of Model B, but no more than one of either Model.
  • A Model with the Unique Sub-Type or a Unit composed entirely of Models with the Unique Sub-Type may not have any options other than those included on its Army List Profile selected for them.
© Vyacheslav Maltsev 2013-2026