Datasheets
Army List
Datasheets collated
Heavy Assault
• Ruinstorm Daemon Brutes
Fast Attack
• Ruinstorm Daemon Riders
Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Daemons of the Ruinstorm – Ruinstorm Daemon Sovereign

This datasheet does not meet the selection criteria (see Settings tab).
Ruinstorm Daemon Sovereign
UNIT COMPOSITION: 1 SOVEREIGN
350 PointsPts
• This Model may be replaced with 1 Sovereign with Wings for +40 Points.

Daemon sovereigns display authority over their horde of underlings, and exhibit motivations beyond mere destruction. In form, there is little to match one to another, save that all are towering in stature and terrifying of visage in their own fashion. Of all the shifting mass of daemonkind, it is these creatures that are best known to the scholars of Mankind, for many fit the skein of ancient legend, terrors that stalked the nightmares of history. Some would acquire new titles and dark legends as they carved bloody paths between the stars, the horrors of their actions resonating across the Imperium for generations to come.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Sovereign (⌀100-130mm) 9 9 9 7
Sovereign (⌀100-130mm) 7 6 5 7 6 7 5 5 9 9 9 7 3+ 4+
Sovereign with Wings (⌀100-130mm) 9 9 9 7
Sovereign with Wings (⌀100-130mm) 12 6 5 7 6 7 5 5 9 9 9 7 3+ 4+
WARGEAR
  • Sovereign blade
TRAITS
  • Traitor
  • Champion of the Ruinstorm
  • [Ætheric Dominion]
SPECIAL RULES
Sovereign
  • Bulky (7)
  • Eternal Warrior (1)
  • Fear (1)
Soverwiethi Wginngs
  • Bulky (8)
  • Eternal Warrior (1)
  • Fear (1)
TYPE
  • Sovereign: Infantry (Champion, Malefic)
  • Sovereign with Wings: Infantry (Champion, Malefic, Antigrav)
OPTIONS
  • This Model may have its sovereign blade exchanged for one sovereign greatblade for +15 Points.

This datasheet has High Command Battlefield Role. Full list of Daemons of the Ruinstorm units sharing same Battlefield Role follows:

Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Phage (X)

Vile toxins, exotic radiation and all-consuming chemical agents all sap the abilities of warriors in the field even as they kill them. Most terrible are the effects of phosphex, choking the life and strength from those it touches, or the fleshcorroding properties of the dreaded life-eater virus.

Unsaved Wounds with the Phage (X) Special Rule reduce a Characteristic by 1.

If an attack made for a Weapon or Model with this Special Rule inflicts one or more Unsaved Wounds on a Target Unit, then once the Shooting Attack or Initiative Step in which the Unsaved Wound was inflicted has been completely resolved, all remaining Models in the Unit that was the target of the attack must reduce the Characteristic that is the value of X for that variant of the Phage (X) Special Rule by 1 for the remainder of the Battle. Models in a Unit may have any number of different Characteristics reduced by 1 by the Phage (X) Special Rule, but no individual Characteristic may be reduced by more than 1 by the Phage (X) Special Rule no matter how many Unsaved Wounds with any variant of that Special Rule are allocated to Models in that Unit.
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
ENGAGED
A Model is Engaged if either:
  • That Model is in Base Contact with an enemy Model in the same Combat.
  • That Model is no more than 2" from another Model in the same Unit which is in Base Contact with an enemy Model.
Reaping Blow (X)

Whether by skill or the merits of a weapon’s design, some warriors are capable of sweeping strikes that scythe through the ranks of the foe.

If a Model with this Special Rule is outnumbered, it gains extra attacks.

If a Model is outnumbered in Combat and either has this Special Rule or is made to attack with a Weapon that has this Special Rule, then that Model gains a bonus to its Attacks Characteristic equal to the value of X attached to the variant of this Special Rule it has access to. To be considered outnumbered, the total number of Friendly Models Locked in the same Combat must be less than the total number of Enemy Models Locked in the same Combat - Models with the Bulky (X) Special Rule count as a number of Models equal to the value of X in the variant of the Bulky (X) Special Rule that Model has. This Special Rule has no effect during the Challenge Sub-Phase, and no Model that is Engaged in a Challenge may gain additional Attacks due to this Special Rule.

Sovereign blade

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Sovereign blade
Sovereign blade
I
A
S
2
2
Phage (S), Reaping Blow (1)
Immaterial

The Traitor Trait is used in the following Daemons of the Ruinstorm datasheets:

Heavy Assault
Fast Attack
Lords of War
• Samus
Additional Reaction Point
If an Army’s Primary Detachment is from the Daemons of the Ruinstorm Army List, the Controlling Player gains one additional Reaction Point if that Detachment or a Lord of War Detachment from the same Army List includes any Models with the Champion of the Ruinstorm Trait.

The Champion of the Ruinstorm Trait is used in the following Daemons of the Ruinstorm datasheets:

High Command
Lords of War
• Samus

The [Ætheric Dominion] Trait is used in the following Daemons of the Ruinstorm datasheets:

High Command
Command
Heavy Assault
Troops
Support
War Engine
Recon
Fast Attack
Infantry

Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.

Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.
Champion

At the front of any charge and the heart of any defensive line are an army’s champions. These warriors stand ever ready to accept the challenge of their foes and inspire their allies.

The following Rules apply to all Models with the Champion Sub-Type:
  • A Model with the Champion Sub-Type may Issue and Accept Challenges.
Malefic

Infused with the energies of the Warp and unbound by the normal laws of reality, these creatures ignore mortal concerns. While the ӕther is the source of their strength, when it wanes, such warriors find their forms weakening or even dissolving entirely.

The following Rules apply to all Models with the Malefic Sub-Type:
  • When a Unit composed entirely of Models with the Malefic Sub-Type would gain a Tactical Status of any kind, that Tactical Status is not applied to the Models in the Unit, but instead the Unit suffers D3 automatic wounds with an AP of 2 and a Damage Characteristic of 1 against which no Saving Throws of any kind may be made. Once these wounds are resolved, no Tactical Status is applied to any Model in the Unit.
  • Models with the Malefic Sub-Type are not affected by Special Rules that negatively modify their Leadership, Cool, Willpower or Intelligence Characteristics.
  • No Model that does not also have the Malefic Sub-Type may join or be joined by a Unit that includes one or more Models with the Malefic Sub-Type.
Antigrav

Whether equipped with antigrav repulsors or empowered by some esoteric, psychic art, this unit is able to skim above the ground. While incapable of true flight, this does allow it to avoid any of the hampering effects of the prevailing terrain, gliding over obstacles that would ensnare or entangle more conventional troops.

The following Rules apply to all Models with the Antigrav Sub-Type:
  • A Unit that includes only Models with the Antigrav Sub-Type may ignore the effects of any and all Terrain it passes over during movement, including passing over Impassable Terrain without penalty or restriction. However, such Units may not begin or end their movement in Impassable Terrain, and if beginning or ending their movement in Dangerous Terrain must take Dangerous Terrain Tests as normal.
  • A Unit that includes only Models with the Antigrav Sub-Type may ignore both friendly and enemy Models and Units when moving. However, when moving over a friendly Unit all Models with the Antigrav Sub-Type must end their move at least 1" away from all Models that are not part of the same Unit, or if moving over an enemy Unit, must end their move at least 1" away from any enemy Model.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Eternal Warrior (X)

Some warriors are either so preternaturally tough, so bitterly intransigent or so favoured by fortune that they can survive almost any attack. Devastating close combat strikes and huge explosions all fail to bring down this warrior in a single hit and only repeated attacks can end their rampage.

A Model with this Special Rule takes less Damage from attacks.

When a Model with the Eternal Warrior (X) Special Rule is allocated an Unsaved Wound, the Damage of the Unsaved Wound is reduced by the value of X attached to the specific variant of the Eternal Warrior (X) Special Rule. The effects of this Special Rule cannot reduce the Damage of an Unsaved Wound to less than 1, regardless of the value of X.
Fear (X)

Some warriors exude such a terrifying aura that even those hardened by war and death are apprehensive in their presence. Whether this is due to a reputation for cruelty or brutal slaughter or the result of some technological device or psychic glamour makes little difference in the effect it has on the battlefield. Wise commanders will seek to keep their distance and engage such fearsome enemies at range rather than risk their wrath.

Models near an enemy Model with the Fear (X) Special Rule must reduce their Advanced Characteristics.

When any Model from a Unit is within 12" of an enemy Model with the Fear (X) Special Rule, all Models in that Unit must reduce their Leadership, Willpower, Cool and Intelligence Characteristics by the value of X. This negative modifier is removed as soon as no Models in a given Unit are within 12" of any Model with the Fear (X) Special Rule. If a Unit would be affected by multiple instances of the Fear (X) Special Rule, the value of X is not stacked and instead the single highest value is used as a negative modifier.

Sovereign greatblade

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Sovereign greatblade
Sovereign greatblade
-2
A
+3
2
3
Phage (S), Reaping Blow (2)
Immaterial
Army List
Datasheets collated
Heavy Assault
• Ruinstorm Daemon Brutes
Fast Attack
• Ruinstorm Daemon Riders
Lords of War
• Cor’bax Utterblight
• Ka’bandha
• Samus
Faction Rules
• The Warp at War: Building a Daemons of the Ruinstorm Army
• Ætheric Dominions
• Special Rules
• Wargear
• Armoury of the Ruinstorm Daemons

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
© Vyacheslav Maltsev 2013-2026