Datasheets
Army List
Datasheets collated
High Command
• Legatine Command Section
Retinue
• Companion Section
Heavy Assault
• Charonite Ogryn Section
Troops
• Lasrifle Section
Transport
• Arvus Lighter
• Aurox Transport
Heavy Transport
• Dracosan Armoured Transport
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Solar Auxilia – Hermes Veletaris Squadron

This datasheet does not meet the selection criteria (see Settings tab).
Hermes Veletaris Squadron
UNIT COMPOSITION: 2 HERMES VELETARIS SENTINELS
40 PointsPts
• May include up to 4 additional Hermes Veletaris Sentinels at +20 Points per Model.

Incursus pattern Hermes Sentinels are utilised in a much more aggressive role than other patterns, allowing commanders to increase pressure on especially mobile foes who might otherwise outmanoeuvre the somewhat unwieldy Auxilia cohorts. Featuring more comprehensive protection for both their elite pilot and their motive mechanisms, the Incursus pattern is purpose built to support the frontal assaults the Veletarii are famed for, moving into position around the flanks of enemy deployments before unleashing a storm of anti-infantry firepower from their volkite calivers or driving their enemies hack with gouts of searing flame.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Hermes Veletaris Sentinel (⌀60mm) 7 9 6 6
Hermes Veletaris Sentinel (⌀60mm) 8 4 4 5 5 2 3 1 7 9 6 6 3+ -
WARGEAR
  • Volkite caliver
  • Frag grenades
  • Krak grenades
TRAITS
  • [Allegiance]
  • Solar Auxilia
SPECIAL RULES
  • Bulky (2)
  • Implacable Advance
  • Move Through Cover
  • Vanguard (2)
TYPE
  • Cavalry
OPTIONS
  • Any Model in this Unit may have its volkite caliver exchanged for one heavy flamer for +3 Points per Model.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.

In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
  1. Select Target Unit.
  2. Check Target.
  3. Declare Weapons.
  4. Set Fire Groups.
  5. Select Fire Group To Resolve.
  6. Make Hit Tests.
  7. Make Wound Tests.
  8. Select Target Model.
  9. Make Saving Throws & Damage Mitigation Tests.
  10. Select Next Fire Group.
  11. Remove Casualties.
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)

Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.

Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.

When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.

Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.

If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.

Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.

If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Frag Grenades

This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.

Frag grenades can be used to make attacks during the Volley Step.

When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Frag Grenades
Frag Grenades
6
1
3
6
1
Blast (3")
Assault
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
Detonation

Designed to be carefully attached to a target and blast precise holes in the thickest armour, these cumbersome devices are ill-suited to open war. However, when a vulnerable target can be isolated in battle, there are no better tools for piercing its protection.

Weapons with this Special Rule can only attack Vehicles and immobile Models.

A Weapon or attack with this Special Rule may only be selected during Step 2 of any Combat in the Fight Sub-Phase if the Unit making attacks is only Locked in Combat with enemy Units composed of Models with the Vehicle Type and Models with a Movement Characteristic of ‘0’ or ‘-’. If a Unit is Locked in Combat with any enemy Units that include any Models that do not have the Vehicle Type or a Movement Characteristic of ‘0’ or ‘-’ then no Model may use a Weapon or other attack that has this Special Rule.

A Weapon or other attack with this Special Rule may also be used to make attacks targeting a Model with the Building Type or a Terrain Piece that has a Toughness or Armour Characteristic.

Krak grenades

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Krak grenades
Krak grenades
-3
1
6
4
2
Detonation
-

The [Allegiance] Trait is used in the following Solar Auxilia datasheets:

High Command
Retinue
Heavy Assault
Troops
Transport
Heavy Transport

The Solar Auxilia Trait is used in the following Solar Auxilia datasheets:

High Command
Retinue
Heavy Assault
Troops
Transport
Heavy Transport
Deflagrate (X)

Exotic beam weapons of arcing energy or sequential explosions triggered by the death of the first victim, some weapons cause not a single casualty, but a slew of them. Such weapons are wielded with grim efficiency against close packed formations of troops on the battlefields of the Horus Heresy. The most well-known examples are the volkite weapons of Mars, but many others are known.

Unsaved Wounds inflicted by attacks with the Deflagrate (X) Special Rule can cause additional Hits.

At the end of Step 9 of the Shooting Attack process for any Fire Group or Strike Group that includes Weapons with the Deflagrate (X) Special Rule, create a new Fire Group or Strike Group that must then be selected in Step 10 and resolved. This new Fire Group or Strike Group includes a number of Hits equal to the number of Unsaved Wounds caused by the Fire Group or Strike Group that triggered its creation. These Hits all have a Strength equal to the value of X attached to the variant of the Deflagrate (X) Special Rule possessed by Weapons in the preceding Fire Group or Strike Group, an AP of a Damage of 1 and no Special Rules.
Template

Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.

Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.

When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.

Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.

Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.

Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.

OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.

An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Army List
Datasheets collated
High Command
• Legatine Command Section
Retinue
• Companion Section
Heavy Assault
• Charonite Ogryn Section
Troops
• Lasrifle Section
Transport
• Arvus Lighter
• Aurox Transport
Heavy Transport
• Dracosan Armoured Transport
Faction Rules
• The Solar Auxilia Army List
• Cohort Doctrines
• Wargear Lists
• Solar Auxilia Auxiliary Detachments
• Legiones Auxilia Designations
• Special Rules
• Wargear
• Solar Auxilia Gambits
• Solar Auxilia Advanced Reactions
• Armoury of the Solar Auxilia

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
Vanguard (X)

Warriors trained to break the foe’s lines are often at the forefront of their host, but are ill-suited to holding ground in the face of an enemy counter-attack.

A Unit that includes Models with this Special Rule scores fewer Victory Points for controlling Objectives, but can score Victory Points for destroying enemy Units that hold Objectives.

A Unit that includes a majority of Models with the Vanguard (X) Special Rule may only ever score 1 Victory Point for Controlling an Objective, regardless of that Objective’s value. However, the Player that controls a Unit that includes a majority of Models with the Vanguard (X) Special Rule gains Victory Points equal to the value of X in the Vanguard (X) Special Rule, in addition to any Victory Points scored for controlling an Objective, whenever either of the following two statuses are fulfilled:
  • If an attack made for a Unit that includes a majority of Models with the Vanguard (X) Special Rule causes the last Model in an enemy Unit that is Controlling or Contesting an Objective to be Removed as a Casualty.
  • If a Unit that includes a majority of Models with the Vanguard (X) Special Rule has at least one attack made for it in a Combat that results in one or more enemy Units that had at least one Model within 3" of an Objective at the start of that Assault Phase either Falling Back from Combat or being Massacred.

Note that the Vanguard (X) Special Rule may only be used to score Victory Points once per Objective per Player Turn - no matter how many enemy Units were Controlling or Locked in Combat near that Objective.
Cover Save (COV) – A Cover Save is used to negate wounds that would normally ignore or bypass an Armour Test. Few Models will have a Cover Save Characteristic, but other Rules may grant them one temporarily - such as Area Terrain. When a Model’s Cover Save is at its minimum value of ‘-’, that Model may not make Cover Tests.
Cavalry

Cavalry use their fast speed to strike deep into enemy territory and escape before their opponent is able to react. This type includes units mounted on bikes, jetbikes, land speeders and even traditional cavalry mounted on riding beasts.

The following Rules apply to all Models with the Cavalry Type:
  • When making a Fall Back Move for a Model with the Cavalry Type, that Model moves a distance equal to the Initiative Characteristic of the Model plus the total of two Dice rolled and added together.
  • Models with the Cavalry Type may not make use of any Cover Save granted by Terrain Features or Areas of Terrain.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Implacable Advance

The wargear of many Legiones Astartes warriors and war machines incorporates a variety of targeting and stabilisation systems, enabling larger weaponry to be brought to bear even at close ranges.

Models with this Special Rule can make Volley Attacks with other Weapons.

The Controlling Player of a Model with this Special Rule treats all Ranged Weapons such a Model has that do not have any variant of the Heavy (X) Special Rule or Ordnance (X) Special Rule as having the Assault Trait.
Move Through Cover

Pathfinders and scouts are vital parts of any army, able to lead troops through even the worst terrain at speed. Cunning generals will seek to use such troops to outflank and outmanoeuvre the foe.

The Move Through Cover Special Rule allows the penalties of terrain to be ignored.

A Unit that includes at least one Model with the Move Through Cover Special Rule ignores the effects of Difficult Terrain and Dangerous Terrain. If called upon to take a Dangerous Terrain Test then such a Unit is assumed to automatically pass without any Dice being rolled.

Volkite caliver

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Volkite caliver
Volkite caliver
30
2
6
5
1
Deflagrate (6)
Volkite
Panic (X)

Some weapons are so terrifyingly potent that their use instils abject fear in even the most strong-willed warriors. In the face of such wanton power the target can only flee or prepare for death, for few would live to tell of the true horrors of the Age of Darkness once they were unleashed on the battlefield.

Weapons and other attacks that have the Panic (X) Special Rule have a chance of inflicting the Routed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Leadership Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Routed Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Leadership Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule. If the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Heavy flamer

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Heavy flamer
Heavy flamer
Template
1
5
4
1
Template, Panic (1)
Flame

This datasheet has Support Battlefield Role. Full list of Solar Auxilia units sharing same Battlefield Role follows:

© Vyacheslav Maltsev 2013-2026