Solar Auxilia – Crassus Armoured Assault Transport

This datasheet does not meet the selection criteria (see Settings tab).
Crassus Armoured Assault Transport
UNIT COMPOSITION: 1 CRASSUS ARMOURED ASSAULT TRANSPORT
350 PointsPts

Vast land-arks were used by massed armies throughout the galaxy to convey large numbers of troops across the killing fields that surrounded their enemies’ holds. Not only did such vehicles provide protection from all but dedicated anti-armour weapons, they also allowed common infantry soldiers to cross hazardous and arduous terrain in a timely fashion to meet their foe. Such benefits would be equally attractive to the more formalised cohorts of the Solar Auxilia, especially when wider mechanisation was not available.

Armour Transport Capacity
M BS Front Side Rear HP
Crassus (⌀?)
Crassus (⌀?) 10 3 14 13 12 12 35
WARGEAR
  • Two Hull (Front) Mounted heavy bolters
  • Two Sponson Mounted heavy bolters
TRAITS
  • [Allegiance]
  • Solar Auxilia
  • Smokescreen
SPECIAL RULES
  • None
TYPE
OPTIONS
  • This Model may have one item from the Auxilia Pintle Weapons list selected for it.
  • This Model may have any of the following selected for it:
  • One Hull (Front) Mounted hunter-killer missile
    +5 Points
  • Searchlights
    +5 Points
ACCESS POINTS
  • This Model has one Access Point on its Rear Facing.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Heavy (X)

Some weapons are so heavy that, while they can be fired on the move, are more powerful when properly braced and made ready before shooting. Warriors on the battlefield must use their judgement to decide when speed is required and when the full firepower of their arsenal must be unleashed.

Weapons with the Heavy (X) Special Rule gain +1 to a Characteristic when Stationary.

When making a Shooting Attack with a Weapon that has the Heavy (X) Special Rule, a modifier of +1 is added to a Characteristic if the Model with that Weapon is part of a Unit that remained Stationary in the Controlling Player’s previous Movement Phase. If the Characteristic listed is AP, then instead it improves the AP by one Step (see the Rules for modifying Saves and AP). The value of X in the specific variant of the Heavy (X) Special Rule determines which Characteristic gains the +1 modifier.

The [Allegiance] Trait is used in the following Solar Auxilia datasheets:

High Command
Retinue
Heavy Assault
Troops
Transport
Heavy Transport

The Solar Auxilia Trait is used in the following Solar Auxilia datasheets:

High Command
Retinue
Heavy Assault
Troops
Transport
Heavy Transport
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Template

Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.

Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.

When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.

Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.

Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.

Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.

OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.

An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Armourbane

Heavy beams and armour-piercing cannon rarely inflict superficial damage, but always blast and break the hull of their target. Such weapons are superior tank killers, their sheer power prized over lesser weapons when the objective is to apply maximum damage without concern for finesse.

A Weapon with the Armourbane Special Rule counts Glancing Hits as Penetrating Hits.

When making Armour Penetration Tests for an attack with this Special Rule, a result that is equal to, or greater than, the target Armour Value inflicts a Penetrating Hit. A Weapon with this Special Rule can never inflict a Glancing Hit, and any Rule that would force them to do so instead inflicts a Penetrating Hit.
Army List
Datasheets collated

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
Suppressive (X)

A hail of enemy gunfire serves to keep any warrior’s head down, and some weapons are designed specifically to suppress the foe. Only the most steadfast of troops will continue the advance when all they can hear is the whistle and crack of gunshots and the screams of the fallen.

Weapons and other attacks that have the Suppressive (X) Special Rule have a chance of inflicting the Suppressed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more Hits on a Target Unit, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed all Models in the Unit gain the Suppressed Status, and if the Check is passed then there is no further effect. The value of X attached to this Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an Attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Multi-laser

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Multi-laser
Multi-laser
36
3
6
6
1
Suppressive (1)
Las
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Panic (X)

Some weapons are so terrifyingly potent that their use instils abject fear in even the most strong-willed warriors. In the face of such wanton power the target can only flee or prepare for death, for few would live to tell of the true horrors of the Age of Darkness once they were unleashed on the battlefield.

Weapons and other attacks that have the Panic (X) Special Rule have a chance of inflicting the Routed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Leadership Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Routed Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Leadership Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule. If the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Heavy flamer

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Heavy flamer
Heavy flamer
Template
1
5
4
1
Template, Panic (1)
Flame
Armour (Front, Side, Rear) – This Characteristic will often be presented with various separate Sub-Characteristics, one for each of the Model’s Facings (see the Vehicles and Damage). Each of these Sub-Characteristics is used to determine the effect of a Model’s armour and how hard it is to defeat. When any Armour Sub-Characteristic reaches 0, then any Hit on that facing will result in an automatic Penetrating Hit without any Dice being rolled (if the Hit could have triggered a variable Special Rule, then that Rule is considered to automatically activate as part of the Hit).
Hull Points (HP) – The Hull Points Characteristic is primarily used to determine a Model with the Vehicle Type’s capacity for receiving damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Hull Points Characteristic is reduced to 0 that Model is removed from play as a Casualty, see the Rules for Destroyed Vehicles here.
Hull (Arc) Mounted – Hull (Arc) Mounted Weapons will always specify a single Firing Arc and may only attack targets in that Firing Arc. The different Hull arcs are: Front, Rear, Left and Right. Some Units may specify Side as an arc - this means both Left and Right arcs.

For example, a Land Raider Carrier has a Hull (Front) Mounted twin heavy bolter - this Weapon may only attack targets in the Front Firing Arc.

Heavy bolter

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Heavy bolter
Heavy bolter
36
3
5
4
1
Heavy (FP)
Bolt

Heavy stubber

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Heavy stubber
Heavy stubber
36
3
4
6
1
-
Auto
Defensive Weapons – All Weapons on a Model with the Vehicle Type that have a Strength Characteristic of 6 or less are Defensive Weapons. Other Weapons may also be specifically designated as Defensive Weapons on their profile. When a Player chooses to have a Model with the Vehicle Type attack multiple different Units in the same Shooting Phase, Defensive Weapons do not have to make their attacks as Snap Shots.
Pintle Mounted – Pintle Mounted Weapons may attack targets in any Firing Arc without restriction, and are always counted as Defensive Weapons and as having the Assault Trait regardless of the Weapon’s Characteristics.
Auxilia Pintle Weapons
  • - Pintle Mounted heavy stubber
    +5 points
  • - Pintle Mounted heavy flamer
    +10 points
  • - Pintle Mounted multi-laser
    +10 points
Limited (X)

Some weapons carry only a severely limited stock of munitions. Often intended as weapons of last resort, used at the correct point they can turn the tide of battle.

A Weapon with the Limited (X) Special Rule can only be used to attack a limited number of times per Battle.

A Weapon with the Limited (X) Special Rule may only be used to make attacks as part of a Shooting Attack or Combat a number of times equal to the value of X attached to the specific variant of the Special Rule. Each time it is used to make attacks, the Firepower Characteristic or Attacks Modifier Characteristic of the Weapon is not modified by this Special Rule, only the number of times it may be selected in a given Battle.

Hunter-killer missile

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Hunter-killer missile
Hunter-killer missile
48
1
9
3
3
Armourbane, Limited (1)
Missile
Searchlights

Mounted ilium-beacons or simple electric torches, many vehicles mount some kind of portable light to aid in target identification and destruction in darkness and poor weather.

Searchlights allow attacks to ignore Shrouded Damage Mitigation Rolls.

The Target Number of any Shrouded Damage Mitigation Tests is increased by +1 (to a maximum of 6+) when making Tests as a consequence of wounds, Penetrating Hits or Glancing Hits inflicted by Shooting Attacks made by a Model that has searchlights that has Line of Sight to the Target Unit. Additionally, a Model with searchlights may not make Shrouded Damage Mitigation Tests to negate wounds, Penetrating Hits or Glancing Hits.
Transport

From armoured transports, to fleet orbital shuttles and even more esoteric modes of travel, mounting infantry atop faster moving transports is an ancient tactic. The best transports offer a safe haven for fragile infantry as well as a means to traverse even the most difficult terrain at speed.

All Models with the Transport Sub-Type are bound by a set of Rules regarding how they operate:
  • All Models with the Transport Sub-Type have a Transport Capacity Characteristic, which determines the maximum number of Models that can Embark upon it - one Model per point of Transport Capacity, unless another Rule states otherwise.
  • Only Models with the Infantry or Paragon Type may Embark or Disembark upon a Model with the Transport Sub-Type.
  • A Unit may only Embark on a Model with the Transport Sub-Type if all Models in the Embarking Unit have the same Faction as the Model with the Transport Sub-Type.
  • A Model with the Transport Sub-Type may only have a single Unit Embarked upon it at any one time (Models with the Specialist Sub-Type, Command Sub-Type or Paragon Type that have joined a Unit are considered part of that Unit and may Embark alongside it).
  • A Unit may not be partially Embarked on a Model with the Transport Sub-Type - either all Models or no Models in a Unit may be Embarked on a given Model.
  • If a Model with the Transport Sub-Type has a Unit Embarked upon it, the Embarked Unit is not considered part of the same Unit. The two remain separate Units for all purposes.
Access Points
Each Model with the Transport Sub-Type will have a number of Access Points defined in its entry. These are the doors, ramps and hatches that passengers use to get in and out of the Vehicle. All Access Points are defined as being within a specific Facing, corresponding to one of the four Armour Facings that most Models with the Vehicle Type have - for example, a Rhino has one Rear Access Point, and Access Points on both Side Facings. An Access Point must be physically represented on the noted Armour Facing, and when Models are Embarking or Disembarking using that Access Point they count all points on that Armour Facing as an Access Point. Where a Model has two Side Access Points, this indicates one Access Point on each Side Facing. If a Model has an Access Point on only one Side Facing, then this will be noted as Side (Left) Access Point or Side (Right) Access Point to indicate which Facing the Access Point is present on.

Models that do not have the Vehicle Type but that do have the Transport Sub-Type and a Base, count the entirety of the edge of their Base as an Access Point, regardless of the facing of any Access Points they have. Likewise, Models with the Flyer Sub-Type that are mounted on Flying Bases also count the entirety of the edge of their Base as an Access Point.

If any Models in the Embarking Unit are more than 2" from a Facing on the Transport Model that has an Access Point, then no Models can Embark and the Unit remains in play. If all Models in the Embarking Unit are within 2" of a Facing on the Model with the Transport Sub-Type that has an Access Point, then all Models in the Unit are removed from the Battlefield. Players may find it useful to mark or otherwise note which Unit has Embarked on which Model with the Transport Sub-Type and this information should be declared to all Players.

The entire process of Embarkation is resolved during the activation of the Embarking Unit during the Move SubPhase, and as such does not interfere with the activation and movement of the Model the Unit Embarks on. A Model may have Units Embark on it after it has been activated and moved, and also may be activated (if it has not already been activated) and then moved during the Move Sub-Phase after another Unit has Embarked on it.
Sponson Mounted – Sponson Mounted Weapons are usually in pairs, one on each side of a Vehicle (the Model’s profile will note if this is not the case) and may attack targets in the appropriate Sponson Firing Arc (either left or right). Sponson Mounted Weapons are always counted as Defensive Weapons regardless of the Weapon’s Characteristics.
Titan
The following Rules apply to all Models with the Titan Sub-Type:
Super-heavy

From the lumbering Baneblade tanks of the Imperial Army to the destructive power of the Legiones Astartes Falchion, all of the war machines that fall into this category are huge armour-clad constructions that each wield enough firepower to destroy an entire army.


The following Rules apply to all Models with the Super-heavy Sub-Type:
  • Models with this Sub-Type are not affected in any way by Difficult Terrain or Dangerous Terrain, but may still neither pass through nor end their move in Impassable Terrain.
  • A Model with this Sub-Type always gains any benefits for having remained Stationary when making Shooting Attacks, regardless of whether the Model moved in the preceding Movement Phase or the distance moved. This does not count if the Model has Rushed in the Preceding Movement Phase.
  • When making multiple Shooting Attacks in the same Shooting Phase, a Model with this Sub-Type does not have to make all attacks as Snap Shots.
  • A Model with this Sub-Type may only make Reactions in response to actions undertaken by Units that contain one or more Models with the Paragon Type, Super-heavy Sub-Type, Knight Sub-Type* or Titan Sub-Type*.
  • When a Player is instructed to roll on the Vehicle Damage Table for a Model with this Sub-Type, no roll is made. Instead, the Model loses a single Hull Point.
  • If a Model with this Sub-Type has a Transport Capacity, then it may transport any number of Units, so long as the number of Models in the transported Units does not exceed the Vehicle’s Transport Capacity.

*See Liber Questoris for more details on these Unit Sub-Types.
© Vyacheslav Maltsev 2013-2026