Datasheets
Army List
Datasheets collated
High Command
• Legatine Command Section
Retinue
• Companion Section
Heavy Assault
• Charonite Ogryn Section
Troops
• Lasrifle Section
Transport
• Arvus Lighter
• Aurox Transport
Heavy Transport
• Dracosan Armoured Transport
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Solar Auxilia – Arvus Lighter

This datasheet does not meet the selection criteria (see Settings tab).
Arvus Lighter
UNIT COMPOSITION: 1 ARVUS LIGHTER
75 PointsPts

The Solar Auxilia makes extensive use of a variant of the Arvus Lighter and of several similar orbital shuttles, using these solid and reliable workhorses to insert infantry sections and command units into a war zone with pinpoint accuracy. Because the Arvus’ carrying capacity is limited to twelve passengers, larger units such as full strength Lasrifle Sections tend to deploy to a world’s surface in drop ships able to carry entire tercios or even companies, leaving the faster and comparatively more manoeuvrable Arvus to fulfil the role of inserting smaller units with specific battlefield tasks to perform.

Armour Transport Capacity
M BS Front Side Rear HP
Arvus Lighter (⌀120 x 92mm flying base)
Arvus Lighter (⌀120 x 92mm flying base) 18 3 11 11 11 4 12
WARGEAR
  • Searchlights
TRAITS
  • [Allegiance]
  • Solar Auxilia
SPECIAL RULES
  • Light Transport
TYPE
OPTIONS
  • This Model may have one Hull (Rear) Mounted multi-laser selected for it for +10 Points.
  • This Model may have flare launchers selected for it for +5 Points.
ACCESS POINTS
  • If this Model does not have a base, it is considered to have Access Points on all Facings.
WARGEAR

Flare Launchers

Simple but robust, the flare launcher systems fitted to many Imperial aircraft provided a rudimentary countermeasure to many classes of tracking and guidance systems, decreasing the vulnerability of such aircraft to a plethora of antiair weapons.

Flare launchers provide an Invulnerable Save against the Interceptor Reaction.

A Model with flare launchers gains a 5+ Invulnerable Save against any Hits inflicted as part of an Intercept Reaction.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.

The [Allegiance] Trait is used in the following Solar Auxilia datasheets:

High Command
Retinue
Heavy Assault
Troops
Transport
Heavy Transport

The Solar Auxilia Trait is used in the following Solar Auxilia datasheets:

High Command
Retinue
Heavy Assault
Troops
Transport
Heavy Transport
Penetrating Hits – For each Penetrating Hit result, the target Unit suffers 1 Penetrating Hit. If available, any Saving Throws or Damage Mitigation Rolls may be made to discard the Penetrating Hit in the appropriate Step of the attack process (see the Rules for Shooting Attacks or Melee Attacks). If not discarded due to a Saving Throw or Damage Mitigation Roll the Model will lose a number of Hull Points equal to the Damage Characteristic of the Penetrating Hit, which is decided by the Characteristics of the Weapon used to inflict the Penetrating Hit in the same manner as wounds.
Combat Initiative Score – A Model’s Combat Initiative score is the combined value of that Model’s current Initiative Characteristic and the Initiative Modifier Characteristic of the Weapon used to make attacks for that Model. It determines in which Initiative Step attacks may be made for that Model.
Initiative Step – A Combat Round is made up of Initiative Steps, each of which has a value assigned to it to show the order in which they are resolved. In each Initiative Step, Models whose Combat Initiative score is equal to the value of the Initiative Step may make attacks. Initiative Steps are always resolved in descending order, from highest to lowest. As such, Initiative Step 10 is resolved before Initiative Step 9. Models removed from Combat before the Initiative Step in which they can attack lose the opportunity to make attacks.
Glancing Hits – A Glancing Hit inflicts no Damage, however for each Glancing Hit, the attacking Player must roll once on the Vehicle Damage Table in Step 11 of the Shooting Attack process or Step 10 of the Initiative Step process (Players may find it useful to place a marker to remind them of this).
Army List
Datasheets collated
High Command
• Legatine Command Section
Retinue
• Companion Section
Heavy Assault
• Charonite Ogryn Section
Troops
• Lasrifle Section
Transport
• Arvus Lighter
• Aurox Transport
Heavy Transport
• Dracosan Armoured Transport
Faction Rules
• The Solar Auxilia Army List
• Cohort Doctrines
• Wargear Lists
• Solar Auxilia Auxiliary Detachments
• Legiones Auxilia Designations
• Special Rules
• Wargear
• Solar Auxilia Gambits
• Solar Auxilia Advanced Reactions
• Armoury of the Solar Auxilia

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Suppressive (X)

A hail of enemy gunfire serves to keep any warrior’s head down, and some weapons are designed specifically to suppress the foe. Only the most steadfast of troops will continue the advance when all they can hear is the whistle and crack of gunshots and the screams of the fallen.

Weapons and other attacks that have the Suppressive (X) Special Rule have a chance of inflicting the Suppressed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more Hits on a Target Unit, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed all Models in the Unit gain the Suppressed Status, and if the Check is passed then there is no further effect. The value of X attached to this Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an Attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Multi-laser

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Multi-laser
Multi-laser
36
3
6
6
1
Suppressive (1)
Las
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Armour (Front, Side, Rear) – This Characteristic will often be presented with various separate Sub-Characteristics, one for each of the Model’s Facings (see the Vehicles and Damage). Each of these Sub-Characteristics is used to determine the effect of a Model’s armour and how hard it is to defeat. When any Armour Sub-Characteristic reaches 0, then any Hit on that facing will result in an automatic Penetrating Hit without any Dice being rolled (if the Hit could have triggered a variable Special Rule, then that Rule is considered to automatically activate as part of the Hit).
Hull Points (HP) – The Hull Points Characteristic is primarily used to determine a Model with the Vehicle Type’s capacity for receiving damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Hull Points Characteristic is reduced to 0 that Model is removed from play as a Casualty, see the Rules for Destroyed Vehicles here.
Hull (Arc) Mounted – Hull (Arc) Mounted Weapons will always specify a single Firing Arc and may only attack targets in that Firing Arc. The different Hull arcs are: Front, Rear, Left and Right. Some Units may specify Side as an arc - this means both Left and Right arcs.

For example, a Land Raider Carrier has a Hull (Front) Mounted twin heavy bolter - this Weapon may only attack targets in the Front Firing Arc.
Defensive Weapons – All Weapons on a Model with the Vehicle Type that have a Strength Characteristic of 6 or less are Defensive Weapons. Other Weapons may also be specifically designated as Defensive Weapons on their profile. When a Player chooses to have a Model with the Vehicle Type attack multiple different Units in the same Shooting Phase, Defensive Weapons do not have to make their attacks as Snap Shots.
Searchlights

Mounted ilium-beacons or simple electric torches, many vehicles mount some kind of portable light to aid in target identification and destruction in darkness and poor weather.

Searchlights allow attacks to ignore Shrouded Damage Mitigation Rolls.

The Target Number of any Shrouded Damage Mitigation Tests is increased by +1 (to a maximum of 6+) when making Tests as a consequence of wounds, Penetrating Hits or Glancing Hits inflicted by Shooting Attacks made by a Model that has searchlights that has Line of Sight to the Target Unit. Additionally, a Model with searchlights may not make Shrouded Damage Mitigation Tests to negate wounds, Penetrating Hits or Glancing Hits.

This datasheet has Transport Battlefield Role. Full list of Solar Auxilia units sharing same Battlefield Role follows:

Transport
• Arvus Lighter
• Aurox Transport
Transport

From armoured transports, to fleet orbital shuttles and even more esoteric modes of travel, mounting infantry atop faster moving transports is an ancient tactic. The best transports offer a safe haven for fragile infantry as well as a means to traverse even the most difficult terrain at speed.

All Models with the Transport Sub-Type are bound by a set of Rules regarding how they operate:
  • All Models with the Transport Sub-Type have a Transport Capacity Characteristic, which determines the maximum number of Models that can Embark upon it - one Model per point of Transport Capacity, unless another Rule states otherwise.
  • Only Models with the Infantry or Paragon Type may Embark or Disembark upon a Model with the Transport Sub-Type.
  • A Unit may only Embark on a Model with the Transport Sub-Type if all Models in the Embarking Unit have the same Faction as the Model with the Transport Sub-Type.
  • A Model with the Transport Sub-Type may only have a single Unit Embarked upon it at any one time (Models with the Specialist Sub-Type, Command Sub-Type or Paragon Type that have joined a Unit are considered part of that Unit and may Embark alongside it).
  • A Unit may not be partially Embarked on a Model with the Transport Sub-Type - either all Models or no Models in a Unit may be Embarked on a given Model.
  • If a Model with the Transport Sub-Type has a Unit Embarked upon it, the Embarked Unit is not considered part of the same Unit. The two remain separate Units for all purposes.
The Flyer Sub-Type
The following Rules are exceptions to the Core Rules that always apply to a Model with the Flyer Sub-Type at all times during a Horus Heresy Battle:
  • Whilst on the Battlefield, a Model with the Flyer Sub-Type does not block Line of Sight or the Movement of any Model.
  • When moving a Model with the Flyer Sub-Type, ignore all Terrain effects and Rules. However, a Model with the Flyer Sub-Type may still not end a move in or on Impassable Terrain, a Terrain Feature or a Building.
  • Models with the Flyer Sub-Type may move through Models with the Vehicle Type, but never inflict Hits on enemy Units they move through and are never eligible to be the Target of the Death or Glory Advanced Reaction.
  • No Model of any kind may join a Unit that includes a Model with the Flyer Sub-Type.
  • A Model with the Flyer Sub-Type can never gain any Tactical Statuses and ignores any Rules that would force it to do so.
  • A Model with the Flyer Sub-Type may never be Locked in Combat or attacked in any way during the Assault Phase and may not be targeted by attacks made using a Melee Weapon.
  • A Model with the Flyer Sub-Type may never make a Reaction of any kind, unless that Reaction specifically states it may be made by Models with the Flyer Sub-Type - but can be targeted by Reactions.
  • When a Player is instructed to roll on the Vehicle Damage Table for a Model with this Sub-Type, no roll is made. Instead, the Model loses a single Hull Point.
Light Transport

Some transports are made to carry a lighter cargo, and the bulkiest of troops cannot make use of them in combat.

Models with this Special Rule cannot carry Models with the Bulky (X) Special Rule.

Models that have any variant of the Bulky (X) Special Rule may not Embark on a Model that has this Special Rule.
Access Points
Each Model with the Transport Sub-Type will have a number of Access Points defined in its entry. These are the doors, ramps and hatches that passengers use to get in and out of the Vehicle. All Access Points are defined as being within a specific Facing, corresponding to one of the four Armour Facings that most Models with the Vehicle Type have - for example, a Rhino has one Rear Access Point, and Access Points on both Side Facings. An Access Point must be physically represented on the noted Armour Facing, and when Models are Embarking or Disembarking using that Access Point they count all points on that Armour Facing as an Access Point. Where a Model has two Side Access Points, this indicates one Access Point on each Side Facing. If a Model has an Access Point on only one Side Facing, then this will be noted as Side (Left) Access Point or Side (Right) Access Point to indicate which Facing the Access Point is present on.

Models that do not have the Vehicle Type but that do have the Transport Sub-Type and a Base, count the entirety of the edge of their Base as an Access Point, regardless of the facing of any Access Points they have. Likewise, Models with the Flyer Sub-Type that are mounted on Flying Bases also count the entirety of the edge of their Base as an Access Point.

If any Models in the Embarking Unit are more than 2" from a Facing on the Transport Model that has an Access Point, then no Models can Embark and the Unit remains in play. If all Models in the Embarking Unit are within 2" of a Facing on the Model with the Transport Sub-Type that has an Access Point, then all Models in the Unit are removed from the Battlefield. Players may find it useful to mark or otherwise note which Unit has Embarked on which Model with the Transport Sub-Type and this information should be declared to all Players.

The entire process of Embarkation is resolved during the activation of the Embarking Unit during the Move SubPhase, and as such does not interfere with the activation and movement of the Model the Unit Embarks on. A Model may have Units Embark on it after it has been activated and moved, and also may be activated (if it has not already been activated) and then moved during the Move Sub-Phase after another Unit has Embarked on it.
Invulnerable Tests
Invulnerable Saves are listed as a Characteristic on each Model’s Profile, and can also be applied by Special Rules or Wargear.

If a Model cannot have an Armour Test or Cover Test made for it, or the Controlling Player chooses not to make an Armour Test or a Cover Test, but has access to an Invulnerable Save then that Saving Throw may be made instead of an Armour Test or a Cover Test. An Invulnerable Test is resolved in exactly the same manner as an Armour Test. Note that Invulnerable Tests are not affected by the AP value of a wound, however a Model may not have a Invulnerable Test made for it if:
  • A Special Rule or other effect attached to the wound specifies that it ignores Invulnerable Tests or that no Invulnerable Test may be made.
  • An Invulnerable Test may be taken to discard a Penetrating Hit if one is available to the Model.

No more than one Saving Throw of any kind may be made for a given wound or Penetrating Hit. If more than one type of Saving Throw is available then the Controlling Player must select one Saving Throw to make, and may not make any other Saving Throws for that wound or Penetrating Hit - if multiple wounds of the same value or Penetrating Hits are to be resolved then the same type of Saving Throw does not have to be used to resolve them, but this may prove easier and quicker in practice.
Intercept
This Advanced Reaction allows a Unit to attack Units moving into play from Reserves.

Trigger: The Reactive Player may declare an Intercept Reaction whenever the Active Player brings a Unit into play from Reserves or Aerial Reserves. The declaration is made as soon as the last Model from the Unit is placed on the Battlefield and has made any moves it is permitted to make when it enters play.

Cost: The Reactive Player must spend 1 point of their Reaction Allotment to declare an Intercept Reaction - this cost paid as soon as the declaration is made.

Target: The Unit entering play from Reserves or Aerial Reserves is always the Target Unit of this Reaction. After declaring this Reaction, the Reactive Player must select one Unit under their control, this Unit must be able to draw a Line of Sight to at least one Model in the Target Unit. The selected Unit is the Reacting Unit.

Process
Once an Intercept Reaction has been declared, the Reactive Player may make a Shooting Attack for the Reacting Unit, targeting only the Target Unit. All attacks made as part of this Shooting Attack must be made as Snap Shots and Models with the Vehicle Type may only attack with Defensive Weapons.

Flare Launchers

Simple but robust, the flare launcher systems fitted to many Imperial aircraft provided a rudimentary countermeasure to many classes of tracking and guidance systems, decreasing the vulnerability of such aircraft to a plethora of antiair weapons.

Flare launchers provide an Invulnerable Save against the Interceptor Reaction.

A Model with flare launchers gains a 5+ Invulnerable Save against any Hits inflicted as part of an Intercept Reaction.
© Vyacheslav Maltsev 2013-2026