Sudden Dawn Cadre

Books

BookKindEditionVersionLast update
  Sudden Dawn Cadre
  Sudden Dawn CadreIndex10May 2024

Sudden Dawn Cadre

COMMANDER CLOUDSPEAR (1 MODEL)
  • This model is equipped with: airbursting fragmentation projector; plasma rifle; battlesuit fists; 2 shield drones; weapon support system.
The Enforcer Commander is the most durable form of T’au battlesuit and is accompanied by two shield drones that further improve its survivability. Being a VEHICLE, it is still able to shoot while in combat, which means that against less melee-focused armies it can hold onto midfield objectives and continue to pump shots into the enemy.

PATHFINDER TEAM (10 MODELS)
  • The Pathfinder Shas’ui model is equipped with: pulse carbine; pulse pistol; close combat weapon; grav-inhibitor drone.
  • 3 Pathfinder models are equipped with: pulse pistol; rail rifle; close combat weapon.
  • 6 Pathfinder models are equipped with: pulse carbine; pulse pistol; close combat weapon.
The Pathfinder Team is the force’s primary access to heavy weaponry in the form of rail rifles, capable of dealing with vehicles and monsters alike. Due to the weapon’s Heavy ability, the deployment of this unit is critical, as not having to move in the first couple of turns can really improve their efficacy. The Shas’ui is also equipped with a grav-inhibitor drone, which can be a fantastic tool for interfering with enemy mobility and keeping your force safe from charges.

As such, while keeping the Pathfinder Team as a single unit can provide extra protection for your valuable rail rifles, splitting it into two Patrol Squads can allow the bearers of those guns to stand still and fire while you move the Shas’ui forwards to a much more effective position on the battlefield.

BREACHER TEAM (10 MODELS)
  • Every model is equipped with: pulse blaster; pulse pistol; close combat weapon.
The Breacher Team’s pulse blasters are very potent firearms for tackling enemy infantry units, including powerful targets like Terminator Squads. The Rampart of Fire Stratagem pairs well with this, doubling down on their capacity to put out some very lethal firepower. These weapons are short ranged, however, and Fire Warriors are quite fragile, so be sure to position them carefully to avoid enemy retribution. The Lives Before Territory Stratagem is an excellent tool for getting them out of unfortunate situations too.

DEVILFISH (1 MODEL)
  • This model is equipped with: accelerator burst cannon; 2 twin pulse carbines; armoured hull.
The Devilfish is a very durable transport, able to keep the Breacher Team safe until you are ready to unleash their powerful weaponry on the foe. This gives you the agency to pick and choose which targets you hit with that unit and, once they have been delivered, the Devilfish’s high speed and long-ranged weaponry allow it to relocate to backfield objectives and hold onto them for the rest of the game.

Abilities

The datasheets required to use the Sudden Dawn Cadre can be found below, and are designed exclusively for Combat Patrol games. This will include a Faction ability – For the Greater Good – that is referenced on each unit’s datasheet, and is described below.

For the Greater Good

The Hunter Cadres battle for the betterment of the T’au Empire, not for personal gain or egotistic accomplishments. This burning commitment allows for prodigiously effective covering fire. Enemies are pinned in place by deadly bursts of pulse blasts or the infamous T’au markerlight is used to expose even well-fortified enemy positions, allowing other T’au warriors to enfilade the vulnerable enemies with murderous accuracy.

In your Shooting phase, units from your army can work in pairs to help each other target specific enemy units. When they do this, one unit is the Observer unit and the other is their Guided unit. The enemy they are targeting is called their Spotted unit.

Each time you select this unit to shoot, if it is not an Observer unit, it can use this ability. If it does, select one other friendly unit with this ability that is also eligible to shoot (excluding Battle-shocked and Observer units). Until the end of the phase, this unit is considered a Guided unit, and that friendly unit is considered an Observer unit. Then select one enemy unit that is visible to both your units to be their Spotted unit. Until the end of the phase:
  • Each time a model in a Guided unit makes an attack that targets their Spotted unit, improve the Ballistic Skill characteristic of that attack by 1 and, if their Observer unit has the MARKERLIGHT keyword, that attack has the [IGNORES COVER] ability.
  • Each time a model in a Guided unit makes an attack that does not target their Spotted unit, worsen the Ballistic Skill characteristic of that attack by 1.

Enhancements

Your Commander in Enforcer Battlesuit model has the Electro-static Flares Enhancement. You can replace this with Prototype Systems.

DEFAULT ENHANCEMENT
ELECTRO-STATIC FLARES (AURA)

This warrior’s battlesuit has been modified to launch salvoes of obfuscation flares that douse its surrounding area in electro-static interference. While the wargear of all friendly units has been hardened against such measures, that of the enemy has no such protection.

  • While a friendly T’AU EMPIRE unit (excluding DEVILFISH units) is within 6" of the bearer, enemy units cannot use the Fire Overwatch Stratagem to fire at that unit and each time a ranged attack targets that unit, subtract 1 from the Hit roll.
  • The bearer has a 4+ invulnerable save.
OR
OPTIONAL ENHANCEMENT
PROTOTYPE SYSTEMS

Following the tenets of the Greater Good, T’au war leaders often volunteer to field test new prototype weapons and support systems. In this way they take any risk on themselves rather than force it upon their subordinates. They also benefit from the power of these new, bleeding-edge technologies upon the battlefield.

  • Each time the bearer is selected to shoot, you can re-roll one Hit roll and you can re-roll one Wound roll when resolving those attacks.
  • Each time you roll to determine the number of attacks made with the bearer’s airbursting fragmentation projector, you can re-roll the result.
  • The bearer has a 4+ invulnerable save.

Secondary Objectives

You will use the Surprise Attack secondary objective. You can replace this with Ethereal Edict.

DEFAULT SECONDARY OBJECTIVE
SURPRISE ATTACK

Focusing on one facet of the Mont’ka strategic philosophy, this force seeks to swiftly claim vital locations and extract all valuable intelligence, resources or the like from them. Their ultimate goal is to deny these potentially vital assets to the foe.

In the first and second battle rounds:
At the end of you turn, you score 4VP for each objective marker in No Man’s Land you control.

In the third, fourth and fifth battle rounds:
At the end of you turn, you score 2VP for each objective marker in No Man’s Land you control.

BATTLE ROUNDVP SCORED
1-215
3-410
55
OR
OPTIONAL SECONDARY OBJECTIVE
ETHEREAL EDICT

It is the explicit will of the Ethereals that a key asset amongst the enemy force must be eliminated during this Mont’ka strike. All other considerations are secondary, for the word of the Ethereals is absolute.

At the start of the first battle round, your opponent must select one unit from their army. At the end of the battle, you score 12VP if that unit is destroyed.

Stratagems

You can use the following Stratagems:
FIGHT BY THE CODE
1CP
Sudden Dawn Cadre – Strategic Ploy Stratagem
The Code of Fire requires warriors to maximise their firepower at all times, laying down accurate volleys even while on the move.
WHEN: Your Shooting phase.

TARGET: One T’AU EMPIRE unit from your army.

EFFECT: Until the end of the phase, your unit is eligible to shoot in a turn in which it Fell Back.
RAMPART OF FIRE
1CP
Sudden Dawn Cadre – Battle Tactic Stratagem
When pressing forward into enemy territory, warriors of the Fire caste should always be ready to raise a veritable wall of point-blank firepower to drive back onrushing foes.
WHEN: Your Shooting phase.

TARGET: One T’AU EMPIRE unit from your army that has not been selected to shoot this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack that targets an enemy unit within 10", improve the Armour Penetration characteristic of that attack by 1.
LIVES BEFORE TERRITORY
1CP
Sudden Dawn Cadre – Strategic Ploy Stratagem
Even amidst the potential risks of launching a Mont’ka into the heartlands of the foe, T’au strategic doctrine still emphasises manoeuvring so as to preserve Fire caste lives wherever possible.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One T’AU EMPIRE INFANTRY or T’AU EMPIRE BATTLESUIT unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Your unit can make a Normal move of up to D6" and, until the end of the phase, each time an attack targets your unit, it has the Benefit of Cover against that attack.

Datasheets


Commander Cloudspear
(⌀60mm)
M
8"
T
5
Sv
2+
W
6
Ld
7+
OC
2
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Airbursting fragmentation projector [blast, indirect fire]
Airbursting fragmentation projector [blast, indirect fire]
24"
D6
3+
3
0
1
Plasma rifle
Plasma rifle
24"
1
3+
8
-3
3
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Battlesuit fists
Battlesuit fists
Melee
3
4+
5
0
1
ABILITIES
CORE: Deep Strike
FACTION: For the Greater Good
WARGEAR ABILITIES
Shield Drone: Add 1 to the bearer’s Wounds characteristic.
Weapon Support System: Each time the bearer makes a ranged attack, you can ignore any or all modifiers to the Hit roll.
KEYWORDS: VEHICLE, WALKER, FLY, CHARACTER, BATTLESUIT, COMMANDER IN ENFORCER BATTLESUIT, COMMANDER CLOUDSPEAR
FACTION KEYWORDS:
T’AU EMPIRE
STRATAGEMS
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
TANK SHOCK
1CP
Core – Strategic Ploy
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
EPIC CHALLENGE
1CP
Core – Epic Deed
C
FIGHT BY THE CODE
1CP
Sudden Dawn Cadre – Strategic Ploy
RAMPART OF FIRE
1CP
Sudden Dawn Cadre – Battle Tactic
LIVES BEFORE TERRITORY
1CP
Sudden Dawn Cadre – Strategic Ploy


Pathfinder Team
(⌀25mm)
M
7"
T
3
Sv
4+
W
1
Ld
7+
OC
1
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Pulse carbine
Pulse carbine
20"
2
4+
5
0
1
Pulse pistol [pistol]
Pulse pistol [pistol]
12"
1
4+
5
0
1
Rail rifle [devastating wounds, heavy]
Rail rifle [devastating wounds, heavy]
30"
1
5+
10
-4
3
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Close combat weapon
Close combat weapon
Melee
1
5+
3
0
1
Patrol Squads
Before the battle, at the start of the Declare Battle Formations step, this unit can be split into two units, each containing five models. If you do so, one of those units must contain the Pathfinder Shas’ui model and the other unit must contain the models equipped with rail rifles.
ABILITIES
CORE: Scouts 7"
FACTION: For the Greater Good
WARGEAR ABILITIES
Grav-inhibitor Drone: Each time an enemy unit selects the bearer’s unit as the target of a charge, subtract 2 from the Charge roll (this is not cumulative with any other negative modifiers to that Charge roll).
KEYWORDS: INFANTRY, MARKERLIGHT, PATHFINDER TEAM
FACTION KEYWORDS:
T’AU EMPIRE
STRATAGEMS
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
FIGHT BY THE CODE
1CP
Sudden Dawn Cadre – Strategic Ploy
RAMPART OF FIRE
1CP
Sudden Dawn Cadre – Battle Tactic
LIVES BEFORE TERRITORY
1CP
Sudden Dawn Cadre – Strategic Ploy


Breacher Team
(⌀25mm)
M
6"
T
3
Sv
4+
W
1
Ld
7+
OC
2
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Pulse blaster [assault]
Pulse blaster [assault]
10"
2
3+
6
-1
1
Pulse pistol [pistol]
Pulse pistol [pistol]
12"
1
4+
5
0
1
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Close combat weapon
Close combat weapon
Melee
1
5+
3
0
1
ABILITIES
FACTION: For the Greater Good
Breach and Clear: Each time a model in this unit makes a ranged attack that targets an enemy unit within range of an objective marker, you can re-roll the Wound roll.
KEYWORDS: INFANTRY, BATTLELINE, MARKERLIGHT, FIRE WARRIOR, BREACHER TEAM
FACTION KEYWORDS:
T’AU EMPIRE
STRATAGEMS
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
GO TO GROUND
1CP
Core – Battle Tactic
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
FIGHT BY THE CODE
1CP
Sudden Dawn Cadre – Strategic Ploy
RAMPART OF FIRE
1CP
Sudden Dawn Cadre – Battle Tactic
LIVES BEFORE TERRITORY
1CP
Sudden Dawn Cadre – Strategic Ploy


Devilfish
(⌀60mm flying base)
M
12"
T
9
Sv
3+
W
13
Ld
7+
OC
2
RANGED WEAPONS
RANGE
A
BS
S
AP
D
Accelerator burst cannon
Accelerator burst cannon
18"
4
4+
6
-1
1
Twin pulse carbine [assault, twin-linked]
Twin pulse carbine [assault, twin-linked]
20"
2
4+
5
0
1
MELEE WEAPONS
RANGE
A
WS
S
AP
D
Armoured hull
Armoured hull
Melee
3
5+
6
0
1
ABILITIES
CORE: Deadly Demise D3
FACTION: For the Greater Good
TRANSPORT
This model has a transport capacity of 12 T’AU EMPIRE INFANTRY models. It cannot transport BATTLESUIT, KROOT or VESPID STINGWINGS models.
KEYWORDS: VEHICLE, FLY, TRANSPORT, DEDICATED TRANSPORT, DEVILFISH
FACTION KEYWORDS:
T’AU EMPIRE
STRATAGEMS
COMMAND RE-ROLL
1CP
Core – Battle Tactic
C
INSANE BRAVERY
1CP
Core – Epic Deed
C
FIRE OVERWATCH
1CP
Core – Strategic Ploy
C
RAPID INGRESS
1CP
Core – Strategic Ploy
C
TANK SHOCK
1CP
Core – Strategic Ploy
C
HEROIC INTERVENTION
1CP
Core – Strategic Ploy
C
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy
C
FIGHT BY THE CODE
1CP
Sudden Dawn Cadre – Strategic Ploy
RAMPART OF FIRE
1CP
Sudden Dawn Cadre – Battle Tactic
Heavy

Heavy weapons are amongst the biggest guns on the battlefield, but require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.

Weapons with [HEAVY] in their profile are known as Heavy weapons. Each time an attack is made with such a weapon, if the attacking model’s unit Remained Stationary this turn, add 1 to that attack’s Hit roll.

  • Add 1 to Hit rolls if the bearer’s unit Remained Stationary this turn.
RAMPART OF FIRE
1CP
Sudden Dawn Cadre – Battle Tactic Stratagem
When pressing forward into enemy territory, warriors of the Fire caste should always be ready to raise a veritable wall of point-blank firepower to drive back onrushing foes.
WHEN: Your Shooting phase.

TARGET: One T’AU EMPIRE unit from your army that has not been selected to shoot this phase.

EFFECT: Until the end of the phase, each time a model in your unit makes an attack that targets an enemy unit within 10", improve the Armour Penetration characteristic of that attack by 1.

The T’AU EMPIRE and INFANTRY keywords are used in the following Sudden Dawn Cadre datasheets:

Normal Moves
When a unit makes a Normal move, each model in that unit can move a distance in inches less than or equal to its Move (M) characteristic, but no model can be moved within Engagement Range of any enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Benefit of Cover

Shattered ruins and twisted wreckage afford much-needed shelter from enemy salvoes. Even heavily armoured warriors unfazed by small arms fire are thankful for such cover when foes bring their biggest guns to bear.

Models can sometimes gain a measure of protection from terrain features. The rules below detail the conditions under which a terrain feature confers the Benefit of Cover on a model.

Each time a ranged attack is allocated to a model that has the Benefit of Cover, add 1 to the saving throw made for that attack (excluding invulnerable saving throws). Models with a Save characteristic of 3+ or better cannot have the Benefit of Cover against attacks with an Armour Penetration characteristic of 0. Multiple instances of the Benefit of Cover are not cumulative – a model cannot benefit from this rule more than once at any one time.

  • Benefit of Cover: Add 1 to armour saving throws against ranged attacks.
  • Does not apply to models with a Save of 3+ or better against attacks with an AP of 0.
  • Multiple instances are not cumulative.
LIVES BEFORE TERRITORY
1CP
Sudden Dawn Cadre – Strategic Ploy Stratagem
Even amidst the potential risks of launching a Mont’ka into the heartlands of the foe, T’au strategic doctrine still emphasises manoeuvring so as to preserve Fire caste lives wherever possible.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One T’AU EMPIRE INFANTRY or T’AU EMPIRE BATTLESUIT unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Your unit can make a Normal move of up to D6" and, until the end of the phase, each time an attack targets your unit, it has the Benefit of Cover against that attack.
2. Battle-shock
In this step, you must take a Battle-shock test for each of your units on the battlefield that is Below Half-strength. To do so, roll 2D6: if the result is greater than or equal to the best Leadership characteristic in that unit, the test is passed; otherwise, the test is failed and, until the start of your next Command phase, that unit is Battle-shocked.

While a unit is Battle-shocked:

Once you have taken Battle-shock tests for all of your units that require them, your Command phase ends and you progress to your Movement phase.

In this step, if for any reason a unit is forced to take a Battle-shock test for being below its Starting Strength, unless otherwise stated, that unit does not also have to take a Battle-shock test for being Below Half-strength. While a unit is Battle-shocked, all models in that unit are also Battle-shocked.

  • Take a Battle-shock test for each unit from your army on the battlefield that is Below Half-strength.
  • Roll 2D6: if the result is greater than or equal to the unit’s Leadership, the test is passed. Otherwise, the unit is Battle-shocked until the start of your next Command phase.
  • Battle-shocked units have an OC of 0 and their controlling player cannot use Stratagems to affect them.
  • Battle-shocked units must take Desperate Escape tests if they Fall Back.

The MARKERLIGHT keyword is used in the following Sudden Dawn Cadre datasheets:

Ignores Cover

Some weapons are designed to root enemy formations out of entrenched positions.

Weapons with [IGNORES COVER] in their profile are known as Ignores Cover weapons. Each time an attack is made with such a weapon, the target cannot have the Benefit of Cover against that attack.
Advance Moves
When a unit Advances, make an Advance roll for that unit by rolling one D6. Add the result in inches to the Move characteristic of each model in that unit until the end of the phase. Each model in that unit can then make an Advance move by moving a distance in inches less than or equal to this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it Advanced.

  • Advance Move: Models move up to M+D6".
  • Cannot move within Engagement Range of any enemy models.
  • Units that Advance cannot shoot or charge this turn.
Fall Back Moves
When a unit Falls Back, each model in that unit can make a Fall Back move by moving a distance in inches less than or equal to its Move characteristic, and when doing so you can move it within Engagement Range of enemy models, provided it does not end that move within Engagement Range of any enemy models – if this is not possible, that unit cannot Fall Back.

A unit cannot shoot or declare a charge in the same turn that it Fell Back.

Desperate Escape Tests
Unlike when making other types of move, models can move over enemy models when making a Fall Back move as if those enemy models were not there, but you must take a Desperate Escape test for each model that will do so (excluding models that are TITANIC or can FLY) before any models in that unit are moved. In addition, if a unit is Battle-shocked when it is selected to Fall Back, you must take a Desperate Escape test for every model in that unit before any are moved.

Each time you take a Desperate Escape test for a model, roll one D6. For each roll of 1-2, one model from the unit that is Falling Back is destroyed (selected by you). The same model can only ever trigger one Desperate Escape test per phase.

  • Fall Back Move: Models move up to M".
  • Units that Fall Back cannot shoot or declare a charge in the same turn.
  • Models can move over enemy models when Falling Back, but you must take Desperate Escape tests for them before they do so (excluding models that are TITANIC or can FLY).
  • If a Battle-shocked unit is selected to Fall Back, take a Desperate Escape test for every model in that unit.
  • Desperate Escape Test: Roll one D6. On a 1-2, one model from that unit is destroyed.
Charging with a Unit
Once you have selected an eligible unit to declare a charge, you must select one or more enemy units within 12" of it as the targets of that charge. The targets of a charge do not need to be visible to the charging unit.

You then make a Charge roll for the charging unit by rolling 2D6. The result is the maximum number of inches each model in that unit can be moved if a Charge move is possible. For a Charge move to be possible, the Charge roll must be sufficient to enable the charging unit to end that move:
  • Within Engagement Range of every unit that you selected as a target of the charge.
  • Without moving within Engagement Range of any enemy units that were not a target of the charge.
  • In Unit Coherency.
If any of these conditions cannot be met, the charge fails and no models in the charging unit move this phase. Otherwise, the charge is successful and the models in the charging unit make a Charge move – move each model a distance in inches up to the result of the Charge roll. When doing so, each model in the charging unit must end its Charge move closer to one of the units selected as a target of its charge. If you can also move a charging model so that it ends its Charge move in base-to-base contact with one or more enemy models while still enabling the charging unit to end its move satisfying all of the conditions above, you must do so. The controlling player chooses the order in which to move their models.

  • Charge Roll: 2D6".
  • Targets of a charge must be within 12" but do not need to be visible.
  • If the distance rolled is insufficient to move within Engagement Range of all targets while maintaining Unit Coherency, the charge fails.
  • Cannot move within Engagement Range of any unit that was not a target of the charge.
  • If the charge is successful, each model makes a Charge move less than or equal to the Charge roll, and must move into base-to-base contact with an enemy model if possible.
Unit Visible
If one or more models in a unit is visible to the observing model, then that model’s unit is visible to the observing model.

Hit Roll
When a model makes an attack, make one Hit roll for that attack by rolling one D6. If the result of the Hit roll is greater than or equal to the attack’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that Hit roll is successful and scores one hit against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Hit roll of 6 is called a Critical Hit and is always successful. An unmodified Hit roll of 1 always fails. A Hit roll can never be modified by more than -1 or +1.

  • Hit Roll (Ranged Attack): A hit is scored if the D6 result equals or exceeds that attack’s BS.
  • Hit Roll (Melee Attack): A hit is scored if the D6 result equals or exceeds that attack’s WS.
  • Critical Hit: Unmodified Hit roll of 6. Always successful.
  • An unmodified Hit roll of 1 always fails.
  • A Hit roll can never be modified by more than -1 or +1.
FIRE OVERWATCH
1CP
Core – Strategic Ploy Stratagem
A hail of wildfire can drive back advancing foes.
WHEN: Your opponent’s Movement or Charge phase, just after an enemy unit is set up or when an enemy unit starts or ends a Normal, Advance, Fall Back or Charge move.

TARGET: One unit from your army that is within 24" of that enemy unit and that would be eligible to shoot if it were your Shooting phase.

EFFECT: If that enemy unit is visible to your unit, your unit can shoot that enemy unit as if it were your Shooting phase.

RESTRICTIONS: You cannot target a TITANIC unit with this Stratagem. Until the end of the phase, each time a model in your unit makes a ranged attack, an unmodified Hit roll of 6 is required to score a hit, irrespective of the attacking weapon’s Ballistic Skill or any modifiers. You can only use this Stratagem once per turn.
Invulnerable Saves

Whether shielded by force fields, enveloped in mystical energies or simply possessed of preternatural senses and lightning-fast reflexes, some warriors are protected by more than mere physical armour.

Some models have an invulnerable save listed on their datasheet. Each time an attack is allocated to a model with an invulnerable save, the controlling player must choose to use either that model’s Save characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use.

Unlike armour saving throws (which use a model’s Save characteristic), invulnerable saving throws are never modified by an attack’s Armour Penetration characteristic, but otherwise follow the normal rules for saving throws.

  • Invulnerable Save: Never modified by an attack’s AP.
  • The controlling player can choose to use either a model’s invulnerable save or its Save characteristic.
Wound Roll
Each time an attack scores a hit against a target unit, make a Wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target unit. The result required is determined by comparing the attack’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown below.

WOUND ROLL
ATTACK’S STRENGTH VS TARGET’S TOUGHNESSD6 RESULT REQUIRED
Strength is TWICE (or more than twice) the Toughness.
+
Strength is GREATER than the Toughness.
+
Strength is EQUAL to the Toughness.
+
Strength is LESS than the Toughness.
+
Strength is HALF (or less than half) the Toughness.
+

If the result of the Wound roll is greater than or equal to the required number shown in the table above, then that Wound roll is successful and scores one wound against the target unit. Otherwise, the attack fails and the attack sequence ends.

An unmodified Wound roll of 6 is called a Critical Wound and is always successful. An unmodified Wound roll of 1 always fails. A Wound roll can never be modified by more than -1 or +1.

  • Critical Wound: Unmodified Wound roll of 6. Always successful.
  • An unmodified Wound roll of 1 always fails.
  • A Wound roll can never be modified by more than -1 or +1.
Objective Markers
Objective markers represent objects of tactical or strategic import that both sides are attempting to secure, such as valuable artefacts, vital supplies or communications nodes. If a mission uses objective markers, it will state where they are located on the battlefield. These can be represented using any suitable marker, but we recommend using round markers that are 40mm in diameter.

When setting objective markers up on the battlefield, place them so they are centred on the point specified by the mission. When measuring distances to and from objective markers, measure to and from the closest part of them. Models can move over objective markers as if they were not there, but they cannot end a move on top of an objective marker.

At the start of the battle, each objective marker on the battlefield is said to be contested, and so is not controlled by either player. To control an objective marker, a player will first need to move models within range of it. A model is within range of an objective marker if it is within 3" horizontally and 5" vertically of that objective marker.

Every model has an Objective Control (OC) characteristic listed on its datasheet. To determine a player’s Level of Control over an objective marker, add together the OC characteristics of all the models from that player’s army that are within range of that objective marker. A player will control an objective marker at the end of any phase or turn if their Level of Control over it is greater than their opponent’s. If both players have the same Level of Control over an objective marker, that objective marker is contested.

  • A model is within range of an objective marker if within 3" horizontally and 5" vertically.
  • Level of Control: Add together the OC characteristics of all of a player’s models within range of the objective marker.
  • An objective marker is controlled by the player with the highest Level of Control over it (in a tie, it is contested).
  • Models cannot end a move on top of an objective marker.
Destroyed
Throughout a battle, models will suffer damage and be destroyed. When a model is destroyed, it is removed from the battlefield. When every model in a unit has been destroyed, that unit is destroyed.
DEEP STRIKE

Some units make their way to battle via tunnelling, teleportation, high-altitude descent or other extraordinary means that allow them to appear suddenly in the thick of the fighting.

During the Declare Battle Formations step, if every model in a unit has this ability, you can set it up in Reserves instead of setting it up on the battlefield. If you do, in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" horizontally away from all enemy models. If a unit with the Deep Strike ability arrives from Strategic Reserves, the controlling player can choose for that unit to be set up either using the rules for Strategic Reserves or using the Deep Strike ability.
  • Unit can be set up in Reserves instead of on the battlefield.
  • Unit can be set up in your Reinforcements step, more than 9" horizontally away from all enemy models.
For the Greater Good

The Hunter Cadres battle for the betterment of the T’au Empire, not for personal gain or egotistic accomplishments. This burning commitment allows for prodigiously effective covering fire. Enemies are pinned in place by deadly bursts of pulse blasts or the infamous T’au markerlight is used to expose even well-fortified enemy positions, allowing other T’au warriors to enfilade the vulnerable enemies with murderous accuracy.

In your Shooting phase, units from your army can work in pairs to help each other target specific enemy units. When they do this, one unit is the Observer unit and the other is their Guided unit. The enemy they are targeting is called their Spotted unit.

Each time you select this unit to shoot, if it is not an Observer unit, it can use this ability. If it does, select one other friendly unit with this ability that is also eligible to shoot (excluding Battle-shocked and Observer units). Until the end of the phase, this unit is considered a Guided unit, and that friendly unit is considered an Observer unit. Then select one enemy unit that is visible to both your units to be their Spotted unit. Until the end of the phase:
  • Each time a model in a Guided unit makes an attack that targets their Spotted unit, improve the Ballistic Skill characteristic of that attack by 1 and, if their Observer unit has the MARKERLIGHT keyword, that attack has the [IGNORES COVER] ability.
  • Each time a model in a Guided unit makes an attack that does not target their Spotted unit, worsen the Ballistic Skill characteristic of that attack by 1.
Before selecting targets for this weapon, select one of its profiles to make attacks with.
Blast

High-explosives can fell several warriors in a single blast, but firing them where your comrades will get caught in the ensuing detonation is simply unwise.

Weapons with [BLAST] in their profile are known as Blast weapons, and they make a random number of attacks. Each time you determine how many attacks are made with a Blast weapon, add 1 to the result for every five models that were in the target unit when you selected it as the target (rounding down). Blast weapons can never be used to make attacks against a unit that is within Engagement Range of one or more units from the attacking model’s army (including its own unit).

Example: If a weapon with the [BLAST] ability and an Attacks characteristic of 2D6 targets a unit that contains 11 models, and the roll to determine how many attacks are made is a 9, a total of 11 attacks would be made against that unit.

  • Add 1 to the Attacks characteristic for every five models in the target unit (rounding down).
  • Can never be used against a target that is within Engagement Range of any units from the attacking model’s army (including its own).
Indirect Fire

Indirect fire weapons launch munitions over or around intervening obstacles – nowhere is safe from their fury.

Weapons with [INDIRECT FIRE] in their profile are known as Indirect Fire weapons, and attacks can be made with them even if the target is not visible to the attacking model. These attacks can destroy enemy models in a target unit even though none may have been visible to the attacking unit when you selected that target.

If no models in a target unit are visible to the attacking unit when you select that target, then each time a model in the attacking unit makes an attack against that target using an Indirect Fire weapon, subtract 1 from that attack’s Hit roll an unmodified Hit roll of 1-3 always fails, and the target has the Benefit of Cover against that attack.

Example: An enemy unit is targeted by an attacking model equipped with a weapon with the [INDIRECT FIRE] ability. No models in the target unit are visible to the attacking model, so when resolving the attacks made with that weapon, subtract 1 from that attack’s Hit roll an unmodified Hit roll of 1-3 always fails, and each time an attack is allocated to a model in the target unit, it has the Benefit of Cover against that attack.

  • Can target and make attacks against units that are not visible to the attacking unit.
  • If no models are visible in a target unit when it is selected, then when making an attack against that target with an Indirect Fire weapon, subtract 1 from that attack’s Hit roll, an unmodified Hit roll of 1-3 always fails, and the target has the Benefit of Cover against that attack.

The T’AU EMPIRE keyword is used in the following Sudden Dawn Cadre datasheets:

The VEHICLE keyword is used in the following Sudden Dawn Cadre datasheets:

Flying
If a model can FLY, then when it makes a Normal, Advance or Fall Back move, it can be moved over enemy models as if they were not there, and can be moved within Engagement Range of enemy models when making such a move. Note this also means that MONSTER and VEHICLE models that can FLY can be moved over other MONSTER and VEHICLE models when making such a move. However, models that can FLY cannot end their move on top of any other models or within Engagement Range of any enemy models.

When a model that can FLY starts or ends a move on a terrain feature, instead of measuring the path it has moved across the battlefield, you instead measure its path ‘through the air’, as shown in the diagram below.

  • FLY models can move over enemy models when they make a Normal, Advance or Fall Back move.
  • FLY models that start or end a move on a terrain feature measure distance moved through the air when they make a Normal, Advance or Fall Back move.

The FLY keyword is used in the following Sudden Dawn Cadre datasheets:

Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while %000015069performing actions%.
Hazardous

Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder every time they are used.

Weapons with [HAZARDOUS] in their profile are known as Hazardous weapons. Each time a unit is selected to shoot or fight, after that unit has resolved all of its attacks, for each Hazardous weapon that targets were selected for when resolving those attacks, that unit must take one Hazardous test. To do so, roll one D6: on a 1, that test is failed. For each failed test you must resolve the following sequence (resolve each failed test one at a time):
  • If possible, select one model in that unit that has lost one or more wounds and is equipped with one or more Hazardous weapons.
  • Otherwise, if possible, select one model in that unit (excluding CHARACTER models) equipped with one or more Hazardous weapons.
  • Otherwise, select one CHARACTER model in that unit equipped with one or more Hazardous weapons.
If a model was selected, that unit suffers 3 mortal wounds and when allocating those mortal wounds, they must be allocated to the selected model.
If a unit from a player’s army is selected as the target of the Fire Overwatch Stratagem in their opponent’s Charge phase, any mortal wounds inflicted by Hazardous tests are allocated after the charging unit has ended its Charge move.

Example: A unit of five models make five attacks with ranged weapons with the [HAZARDOUS] ability. After the unit has finished shooting, its controlling player rolls five D6. One of the results is a 1, and as no models in the unit are CHARACTERS, MONSTERS or VEHICLES, one of those models is destroyed.

  • After a unit shoots or fights, roll one Hazardous test (one D6) for each Hazardous weapon used. For each 1, one model equipped with a Hazardous weapon is destroyed (CHARACTERS, MONSTERS and VEHICLES suffer 3 mortal wounds instead).
Saving Throw
The player controlling the target unit then makes one saving throw. By default, this will be an armour saving throw using their model’s Save (Sv) characteristic, but some models have invulnerable saves that can be used instead (see below). To make an armour saving throw, roll one D6, then modify the result by the Armour Penetration (AP) characteristic of the attack. For example, if the attack has an AP of -1, then 1 is subtracted from the saving throw.

If the result is greater than or equal to the Save characteristic of the model the attack was allocated to, then that saving throw is successful and the attack sequence ends. Otherwise, that saving throw fails and that model suffers damage.

An unmodified saving throw of 1 always fails. A saving throw can never be improved by more than +1.

  • Saving Throw: Roll one D6 and modify by the attack’s AP. If the result is less than the Save of the model being rolled for, the saving throw is failed and that model suffers damage. Otherwise, that attack is saved.
  • An unmodified saving throw of 1 always fails.
  • A saving throw can never be improved by more than +1.
Re-rolls
Some rules allow you to re-roll a dice roll, which means you get to roll some or all of the dice again. If a rule allows you to re-roll a dice roll that was made by adding several dice together (e.g. 2D6, 3D6, etc.) then, unless otherwise stated, you must re-roll all of those dice again.

You can never re-roll a dice more than once, and re-rolls happen before modifiers (if any) are applied. Rules that refer to the value of an ‘unmodified’ dice roll are referring to the dice result after any re-rolls, but before any modifiers are applied.

  • Unmodified Dice: the result after re-rolls, but before any modifiers.
  • A dice can never be re-rolled more than once.
  • You must re-roll all dice if several need adding together (e.g. 2D6).
  • Re-rolls are applied before any modifiers.
COMMAND RE-ROLL
1CP
Core – Battle Tactic Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make an Advance roll, a Charge roll, a Desperate Escape test or a Hazardous test for a unit from your army, or a Hit roll, a Wound roll, a Damage roll or a saving throw for a model in that unit, or a roll to determine the number of attacks made with a weapon equipped by a model in that unit. If you are using fast dice rolling, this Stratagem can still be used after rolling multiple rolls or saving throws at once.

TARGET: That unit or model from your army.

EFFECT: You re-roll that roll, test or saving throw. If you are using fast dice rolling, select one of those rolls or saving throws to re-roll.
INSANE BRAVERY
1CP
Core – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you take a Battle-shock test for a unit from your army.

TARGET: That unit from your army.

EFFECT: Your unit automatically passes that Battle-shock test.

RESTRICTIONS: You cannot use this Stratagem more than once per battle.
RAPID INGRESS
1CP
Core – Strategic Ploy Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.

TARGET: One unit from your army that is in Reserves.

EFFECT: Your unit can arrive on the battlefield as if it were the Reinforcements step of your Movement phase, and if every model in that unit has the Deep Strike ability, you can set that unit up as described in the Deep Strike ability (even though it is not your Movement phase).

RESTRICTIONS: You cannot use this Stratagem to enable a unit to arrive on the battlefield during a battle round it would not normally be able to do so in.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models – and their units – are within Engagement Range of each other.

Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models. If for any reason a model cannot meet this condition, that model is destroyed.

  • Engagement Range: Within 1" horizontally and 5" vertically.
  • Models cannot be set up or end a Normal, Advance or Fall Back move within Engagement Range of any enemy models.
Devastating Wounds
Weapons with [DEVASTATING WOUNDS] in their profile are known as Devastating Wounds weapons. Each time an attack is made with such a weapon, if that attack scores a Critical Wound, no saving throw of any kind can be made against that attack (including invulnerable saving throws). Such attacks are only allocated to models after all other attacks made by the attacking unit have been allocated and resolved. After that attack is allocated and after any modifiers are applied, it inflicts a number of mortal wounds on the target equal to the Damage characteristic of that attack, instead of inflicting damage normally.

Example: An attack made with a Devastating Wounds weapon with a Damage characteristic of 2 scores a Critical Wound. Instead of allocating the attack and making saving throws normally, the target suffers 2 mortal wounds.

  • A Critical Wound inflicts mortal wounds equal to the weapon’s Damage characteristic, instead of any normal damage.
Mortal Wounds

Some attacks are so powerful that no armour or force field can withstand their fury.

Some rules inflict mortal wounds on units. Each time mortal wounds are inflicted on a unit, each of those mortal wounds inflicts one point of damage to that unit, and they are always applied one at a time. Each mortal wound is allocated to a model in the same manner as allocating an attack. Excess damage from mortal wounds is not lost if the damage can be allocated to another model. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to any normal damage, do not make a Wound roll or saving throw (including invulnerable saving throws) against those mortal wounds. If those mortal wounds are inflicted by an attack that has the [PRECISION] ability, the attacking model’s controlling player can allocate those mortal wounds to a CHARACTER model in that unit.

If mortal wounds are being inflicted as a result of the [HAZARDOUS] ability or by an attack with the [DEVASTATING WOUNDS] ability that scored a Critical Wound, each time those mortal wounds are allocated to a model, if that model is destroyed as a result of those mortal wounds, the remaining mortal wounds from that attack are lost, just as with a normal attack.

If, when a unit is selected to shoot or fight, one or more of its attacks can inflict mortal wounds on the target, resolve any normal damage inflicted by the attacking unit’s attacks on that target before inflicting any mortal wounds on that target. If an attack inflicts mortal wounds in addition to any normal damage, but the normal damage is subsequently saved, the target unit still suffers those mortal wounds, as described above.

  • Each mortal wound inflicted on a unit causes one model in that unit to lose one wound.
  • Unless the source of the mortal wounds is the [HAZARDOUS] ability or an attack with the [DEVASTATING WOUNDS] ability, damage from mortal wounds is not lost if it can be allocated to another model.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks always apply after any normal damage, even if that damage was saved.
TANK SHOCK
1CP
Core – Strategic Ploy Stratagem
Ramming the foe with a speeding vehicle may be an unsubtle tactic, but it is a murderously effective one.
WHEN: Your Charge phase, just after a VEHICLE unit from your army ends a Charge move.

TARGET: That VEHICLE unit.

EFFECT: Select one enemy unit within Engagement Range of your unit, and select one VEHICLE model in your unit that is within Engagement Range of that enemy unit. Roll a number of D6 equal to the Toughness characteristic of the selected VEHICLE model. For each 5+, that enemy unit suffers 1 mortal wound (to a maximum of 6 mortal wounds).
Charge Bonus

Many warriors thunder headlong into combat, using the impetus of their charge to bring swift death to their foes.

Each time a unit makes a Charge move, until the end of the turn, that unit has the Fights First ability.
HEROIC INTERVENTION
1CP
Core – Strategic Ploy Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: Your opponent’s Charge phase, just after an enemy unit ends a Charge move.

TARGET: One unit from your army that is within 6" of that enemy unit and would be eligible to declare a charge against that enemy unit if it were your Charge phase.

EFFECT: Your unit now declares a charge that targets only that enemy unit, and you resolve that charge as if it were your Charge phase.

RESTRICTIONS: You can only select a VEHICLE unit from your army if it is a WALKER. Note that even if this charge is successful, your unit does not receive any Charge bonus this turn.
COUNTER-OFFENSIVE
2CP
Core – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.

TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.

EFFECT: Your unit fights next.
Attached Units
Some CHARACTER units have the Leader ability, which lets them merge with other units (known as Bodyguard units) to form an Attached unit.

The Starting Strength of an Attached unit is equal to the combined Starting Strengths of all of its units (i.e. the number of models in the Leader unit added to the number of models in the Bodyguard unit). If either the Leader unit or the Bodyguard unit in an Attached unit is destroyed, the Starting Strength of the remaining unit is changed to be equal to its original Starting Strength.

Example: A Primaris Captain (Starting Strength 1) is attached to a unit of Intercessors (Starting Strength 5). This Attached unit has a Starting Strength of 6. If all the Intercessors are destroyed, the remaining Primaris Captain would revert to having a Starting Strength of 1.

For the purposes of rules that are triggered when a unit is destroyed, such rules are still triggered when one of the individual units that made up an Attached unit is destroyed (the Leader or the Bodyguard unit).

Example: If a rule awards you with 1VP each time an enemy unit is destroyed, and you target an Attached unit, you would gain 1VP if the Bodyguard unit is destroyed and 1VP if the Leader unit is destroyed (for a total of 2VP).
Precision

Precision attacks can pick high-value targets out in a crowd, whether through the unerring aim of a sniper or the pinpoint accuracy of a blade-master’s strike.

Weapons with [PRECISION] in their profile are known as Precision weapons. Each time an attack made with such a weapon successfully wounds an Attached unit (see Leader ability), if a CHARACTER model in that unit is visible to the attacking model, the attacking model’s player can choose to have that attack allocated to that CHARACTER model instead of following the normal attack sequence.

  • When targeting an Attached unit, the attacking model’s player can have the attack allocated to a CHARACTER model in that unit visible to the bearer.
EPIC CHALLENGE
1CP
Core – Epic Deed Stratagem
The legends of the 41st Millennium are replete with deadly duels between mighty champions.
WHEN: Fight phase, when a CHARACTER unit from your army that is within Engagement Range of one or more Attached units is selected to fight.

TARGET: One CHARACTER model in your unit.

EFFECT: Until the end of the phase, all melee attacks made by that model have the [PRECISION] ability.
FIGHT BY THE CODE
1CP
Sudden Dawn Cadre – Strategic Ploy Stratagem
The Code of Fire requires warriors to maximise their firepower at all times, laying down accurate volleys even while on the move.
WHEN: Your Shooting phase.

TARGET: One T’AU EMPIRE unit from your army.

EFFECT: Until the end of the phase, your unit is eligible to shoot in a turn in which it Fell Back.
SCOUTS

Scouts form the vanguard of many armies. Unnoticed by the enemy, they range ahead of the main force.

Some units have ‘Scouts x"’ listed in their abilities. If every model in a unit has this ability, then at the start of the first battle round, before the first turn begins, it can make a Normal move of up to x" as if it were your Movement phase – as can any DEDICATED TRANSPORT model such a unit starts the battle embarked within (provided only models with this ability are embarked within that DEDICATED TRANSPORT model). A unit that moves using this ability must end that move more than 9" horizontally away from all enemy models. If both players have units that can do this, the player who is taking the first turn moves their units first.

Example: A unit has the Scouts 6" ability. At the start of the first battle round, the controlling player can make a Normal move with that unit of up to 6".

  • Scouts x": Unit can make a Normal move of up to x" before the first turn begins.
  • If embarked in a DEDICATED TRANSPORT, that DEDICATED TRANSPORT can make this move instead.
  • Must end this move more than 9" horizontally away from all enemy models.
Pistol

Pistols can be wielded even at point-blank range.

Weapons with [PISTOL] in their profile are known as Pistols. If a unit contains any models equipped with Pistols, that unit is eligible to shoot in its controlling player’s Shooting phase even while it is within Engagement Range of one or more enemy units. When such a unit is selected to shoot, it can only resolve attacks using its Pistols and can only target one of the enemy units it is within Engagement Range of. In such circumstances, a Pistol can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

If a model is equipped with one or more Pistols, unless it is a MONSTER or VEHICLE model, it can either shoot with its Pistols or with all of its other ranged weapons. Declare whether such a model will shoot with its Pistols or its other ranged weapons before selecting targets.

  • Can be shot even if the bearer’s unit is within Engagement Range of enemy units, but must target one of those enemy units.
  • Cannot be shot alongside any other non-Pistol weapon (except by a MONSTER or VEHICLE).

The INFANTRY keyword is used in the following Sudden Dawn Cadre datasheets:

The MARKERLIGHT keyword is used in the following Sudden Dawn Cadre datasheets:

GO TO GROUND
1CP
Core – Battle Tactic Stratagem
Seeking salvation from incoming fire, warriors hurl themselves into whatever cover they can find.
WHEN: Your opponent’s Shooting phase, just after an enemy unit has selected its targets.

TARGET: One INFANTRY unit from your army that was selected as the target of one or more of the attacking unit’s attacks.

EFFECT: Until the end of the phase, all models in your unit have a 6+ invulnerable save and have the Benefit of Cover.
Assault

Assault weapons fire so indiscriminately that they can be shot from the hip as warriors dash forward.

Weapons with [ASSAULT] in their profile are known as Assault weapons. If a unit that Advanced this turn contains any models equipped with Assault weapons, it is still eligible to shoot in this turn’s Shooting phase. When such a unit is selected to shoot, you can only resolve attacks using Assault weapons its models are equipped with.

  • Can be shot even if the bearer’s unit Advanced.
Disembark
If a unit from your army starts your Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase.

When a unit disembarks from a TRANSPORT model, set it up on the battlefield so that it is wholly within 3" of that TRANSPORT model and not within Engagement Range of any enemy models. If, for any reason, a disembarking model cannot be set up, that model’s unit cannot disembark.

Units that disembark from a TRANSPORT model that either Remained Stationary this phase or has not yet made a Normal, Advance or Fall Back move this phase can then act normally (make a Normal move, Advance, shoot, declare a charge, fight, etc.) in the remainder of the turn. Such a disembarking unit cannot choose to Remain Stationary.

Units that disembark from a TRANSPORT model that made a Normal move this phase count as having made a Normal move themselves; they cannot move further during this phase. Such a unit also cannot declare a charge in the same turn, but can otherwise act normally in the remainder of the turn.

Units cannot disembark from a TRANSPORT model that either Advanced or Fell Back this turn.

  • Units that start your Movement phase embarked within a TRANSPORT can disembark this phase, provided their TRANSPORT has not Advanced or Fallen Back.
  • If a unit disembarks before its TRANSPORT moves, it can act normally.
  • If a unit disembarks after its TRANSPORT moves, it cannot move or charge this turn, but can otherwise act normally.
  • Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models (or the unit cannot disembark).
  • Units that disembark this turn cannot Remain Stationary.
DEADLY DEMISE

From detonating ammo stores to corrosive innards or frenzied death throes, some targets are deadly even in defeat.

Some models have ‘Deadly Demise x’ listed in their abilities. When such a model is destroyed, roll one D6 before removing it from play (if such a model is a TRANSPORT, roll before any embarked models disembark). On a 6, each unit within 6" of that model suffers a number of mortal wounds denoted by ‘x’ (if this is a random number, roll separately for each unit within 6").

Example: A TRANSPORT model with the Deadly Demise D3 ability is destroyed. Before any models disembark and before removing it from play, its controlling player rolls one D6, getting a 6. There are three units within 6" of that destroyed model, so its controlling player rolls one D3 for each of them, inflicting mortal wounds accordingly.

  • Deadly Demise x: When this model is destroyed, roll one D6. On a 6, each unit within 6" suffers ‘x’ mortal wounds.
Twin-linked

Dual weapons are often grafted to the same targeting system for greater lethality.

Weapons with [TWIN-LINKED] in their profile are known as Twin-linked weapons. Each time an attack is made with such a weapon, you can re-roll that attack’s Wound roll.
Embark
If a unit makes a Normal, Advance or Fall Back move, and every model in that unit ends that move within 3" of a friendly TRANSPORT model, they can embark within it. A unit cannot embark if it has already disembarked from a TRANSPORT model in the same phase. Remove the unit from the battlefield and place it to one side – it is now embarked within that TRANSPORT model. Unless otherwise stated, units cannot do anything or be affected in any way while they are embarked.

  • A unit can embark within a friendly TRANSPORT if all of its models end a Normal, Advance or Fall Back move within 3" of that TRANSPORT.
  • A unit cannot embark and disembark in the same phase.
Transport Capacity
All TRANSPORT models have a transport capacity listed on their datasheet. This determines the type and maximum number of friendly models that can embark within them.

Units can start the battle embarked within a TRANSPORT model instead of being set up separately – declare which units are embarked within a TRANSPORT model before you set it up.

FIRING DECK

Some transports have firing hatches, ports or platforms from which embarked passengers can shoot.

Some TRANSPORT models have ‘Firing Deck x’ listed in their abilities. Each time such a model is selected to shoot in the Shooting phase, you can select up to ‘x’ models embarked within it whose units have not already shot this phase. Then, for each of those embarked models, you can select one ranged weapon that embarked model is equipped with (excluding weapons with the [ONE SHOT] ability). Until that TRANSPORT model has resolved all of its attacks, it counts as being equipped with all of the weapons you selected in this way, in addition to its other weapons. Until the end of the phase, those selected models’ units are not eligible to shoot.

  • Firing Deck ‘x’: Each time this TRANSPORT shoots, select one weapon (excluding weapons with the [ONE SHOT] ability) from up to ‘x’ models embarked within it whose units have not shot this phase; this TRANSPORT counts as being equipped with those weapons as well. Until the end of the phase, those selected models’ units are not eligible to shoot.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
© Vyacheslav Maltsev 2013-2024