Genestealer Cults – Tyrannocyte
RANGED WEAPONS | RANGE | A | BS | S | AP | D | |
| Tyrannocyte bio-weapons | |||||||
| Tyrannocyte bio-weapons | 24" | 5 | 4+ | 5 | -1 | 2 | |
MELEE WEAPONS | RANGE | A | WS | S | AP | D | |
| Flensing whips | |||||||
| Flensing whips | Melee | 6 | 4+ | 7 | -1 | 2 | |
ABILITIES
CORE: Deadly Demise D3, Deep Strike
FACTION: Synapse
Aerial Seeding: This model must start the battle in Reserves, but neither it nor any units embarked within it are counted towards any limits placed on the maximum number of Reserves units you can start the battle with. This model can be set up in the Reinforcements step of your first, second or third Movement phase, regardless of any mission rules. Any units embarked within this model must immediately disembark after it has been set up on the battlefield, and they must be set up more than 8" away from all enemy models. After this model has been set up on the battlefield, no units can embark within it.
UNIT COMPOSITION
- 1 Tyrannocyte
| YOUR 1ST TO 3RD UNITS COST | |
| 1 model | 80 |
| YOUR 4TH + UNIT COSTS | |
| 1 model | 90 |
TRANSPORT
This model has a transport capacity of 20 TYRANIDS INFANTRY models, or 1 TYRANIDS MONSTER model with a Wounds characteristic of 12 or less. Each INFANTRY model with a Wounds characteristic of more than 1 takes up the space of 3 models.
KEYWORDS: MONSTER; FLY; FRAME; TRANSPORT; DEDICATED TRANSPORT; GREAT DEVOURER; VANGUARD INVADER; TYRANNOCYTE
FACTION KEYWORDS:
TYRANIDS
TYRANIDS
STRATAGEMS
COMMAND RE-ROLL
1CP
Core
C
INSANE BRAVERY
1CP
Core
C
FIRE OVERWATCH
1CP
Core
C
RAPID INGRESS
1CP
Core
C
CRUSHING IMPACT
1CP
Core
C
HEROIC INTERVENTION
1CP
Core
C
COUNTEROFFENSIVE
2CP
Core
C
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
PSI SURGE
1CP
Final Day – Strategic Ploy
DARTING ATTACKS
1CP
Final Day – Strategic Ploy
RESISTANCE TUNNELS
1CP
Final Day – Strategic Ploy
DETACHMENT ABILITY
Psionic Parasitism
Errata
Hierophant, Toxicrene, Tyrannocyte and Tyrannofex.
Add the FRAME keyword.
Tyrannocyte, Aerial Seeding Ability
Change 9" to 8".
INGRESS MOVE20.04
SET-UP DISTANCE: 6"
ELIGIBLE IF: Your unit is in strategic reserves (excluding units that are embarked within TRANSPORTS that are themselves in strategic reserves).EFFECT: Your unit is set up as described in Set Up (03.02).
BEFORE MOVING: Your unit is set up as described in Set Up (03.02).
WHILE MOVING: Set up your unit wholly within the set-up distance of one or more battlefield edges and more than 8" horizontally from all enemy units.
- Before the Third Battle Round: While doing so, no models can be set up within your opponent’s deployment zone.
DEEP STRIKE24.09
There are many ways by which to deploy troops to the field of battle including tunnels, teleportation devices and other esoteric means of transportation.
Each time this unit makes an ingress move (20.04), if every model in this unit has this ability, it can be set up anywhere on the battlefield that is more than 8" horizontally from all enemy units, even if that is within your opponent’s deployment zone.05.04.04 Destroyed
Throughout a battle, models will suffer damage, lose wounds and be destroyed. When every model in a unit has been destroyed, that unit is destroyed.When a model is destroyed, first resolve any rules that are triggered when it is destroyed, then it is removed from the battlefield. If any such rules apply, and if the model was destroyed as the result of an attack, unless otherwise stated, those rules are only resolved and that model is only removed after the attacking unit’s attacks have been resolved. Unless otherwise stated, destroyed models and units cannot use abilities or be selected or targeted by rules.
Some rules only trigger if an enemy model or unit was destroyed by you, or by a model or unit from your army. This means that the enemy model or unit was destroyed by an attack made by a model from your army, or by a player rule you have. Enemy models or units that are destroyed by any other means are not destroyed by you, or by a model or unit from your army.
[LETHAL HITS]24.23
Many deadly weapons can inflict fatal injuries on any foe, no matter their resilience.
Each time an attack made with a [LETHAL HITS] weapon results in a critical hit, you can choose for that attack to automatically wound the target.Designer’s Note: Choosing to automatically wound the target means that no wound roll is made for that attack. You may decide against this, as it means that attack cannot result in a critical wound and so cannot trigger other abilities such as [DEVASTATING WOUNDS].
06.01 Visibility
Line of sight is used to determine visibility between models. For an observing model to have line of sight, it must be possible to draw an imaginary straight line, 1 mm wide, from any part of that model to any part of the model being observed. This line is the line of sight. While doing so, other models in the observing model’s unit and in the observed model’s unit are ignored.Other models and units can be either visible or fully visible to the observing model, as shown below. Note that terrain applies additional rules to visibility (13.07).
Model Visible
If any part of another model is visible to the observing model, that model is visible.
Model Fully Visible
If every part of another model that is facing the observing model is visible to the observing model (so the only thing blocking visibility to any part of that other model is that model itself), that model is fully visible.
Unit Visible
If one or more models in a unit are visible to the observing model, that unit is visible.
Unit Fully Visible
If every model in a unit is fully visible to the observing model, that unit is fully visible. When determining this, the observing model can see through other models in that unit.
FAQ
| Q: | When checking line of sight from one model to another, is this drawn between the bases of those models, or between any part of them? |
| A: | Line of sight is drawn from any part of the observing model to any part of the model being observed. |
SNAP SHOOTING15.09
ELIGIBLE IF: As stated in the rule allowing this shooting type.
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
- You can only target one visible enemy unit within 24" of your unit (and only if it is an eligible target).
- Each attack only hits on an unmodified hit roll of 6 (irrespective of the attacking weapon’s BS characteristic or any modifiers).
- You cannot re-roll hit rolls.
Hit Roll
Make one hit roll for each attack dice by rolling one D6. For each result, check if it fails or is a hit by matching the first condition below that applies:
|
CRITICAL HITS
Critical hits are still hits. In addition, other rules can be triggered by a critical hit, such as [LETHAL HITS] (24).FAQ
| Q: | My attack has a rule that means it results in a critical hit on a hit roll of 4+. Does this work when snap shooting? |
| A: | Unless otherwise stated, no: when snap shooting, each attack only hits on a roll of 6. |
| Q: | My attack has a rule that means it results in a critical hit on a hit roll of 4+, and I would otherwise need a 5+ to hit. Does a 4+ hit? |
| A: | Yes, except when snap shooting: when snap shooting, each attack only hits on a roll of 6. |
The DEDICATED TRANSPORT keyword is used in the following Genestealer Cults datasheets:
The FLY keyword is used in the following Genestealer Cults datasheets:
Monster Character
Battleline
Dedicated Transports
13.01 Placing Terrain
Before the battle, place a selection of terrain features on the battlefield using one or more of the following methods:- Place a well-defined boundary (such as a base or mat) in each location you want to furnish with terrain, then place one or more terrain features wholly within that boundary.
- Place one terrain feature directly on the battlefield.
- Place two or more terrain features directly on the battlefield in such a way that together they define the boundary of an area.
In each case, the area of the battlefield occupied by that boundary or terrain feature is known as a terrain area. A mission’s deployment map may define the location and dimensions of each terrain area. Otherwise, players must agree on this before the battle.
FAQ
| Q: | Are models that are within the boundary of a terrain area, but not on the ground floor of a terrain area (e.g. overhanging parts of FRAME VEHICLES or models on terrain features that are within that terrain area) within that terrain area? |
| A: | Yes |
17.02 Frame
Some models do not have a base; many of these are MONSTER/VEHICLE models. Such models have the FRAME keyword, as do some other large models. Whenever a rule refers to a model’s position in relation to anything else on the battlefield (e.g. when measuring distances), if that model has the FRAME keyword, unless otherwise stated, measure to and from the closest point on that model (so not necessarily from its base, if it has one).When rotating a FRAME model as part of a move, if that model does not have a base, turn it any amount around its central axis, while keeping it upright.
FAQ
| Q: | Are models that are within the boundary of a terrain area, but not on the ground floor of a terrain area (e.g. overhanging parts of FRAME VEHICLES or models on terrain features that are within that terrain area) within that terrain area? |
| A: | Yes |
The FRAME keyword is used in the following Genestealer Cults datasheets:
Infantry
Titanic
Vehicle
The GENESTEALER CULTS keyword is used in the following Genestealer Cults datasheets:
Infantry Character
Mounted Character
Dedicated Transports
Mounted
Transport
Vehicle
Fortifications
The GREAT DEVOURER keyword is used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Infantry Character
Monster Character
Mounted Character
Battleline
Infantry
Mounted
Transport
Vehicle
The MONSTER keyword is used in the following Genestealer Cults datasheets:
Monster Epic Hero
Monster Character
Dedicated Transports
The TRANSPORT keyword is used in the following Genestealer Cults datasheets:
Artillery
The TYRANIDS keyword is used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Monster Character
Battleline
Dedicated Transports
The VANGUARD INVADER keyword is used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Monster Character
Battleline
Dedicated Transports
[ONE SHOT]24.26
Some weapons are so rare, or so complex and slow to reload, that they can only be used once.
Each weapon with this ability can only be selected to make attacks with once per battle.If a destroyed model is returned to a unit, all of its [ONE SHOT] weapons that have already been selected to make attacks with during the battle cannot be selected to make attacks with again.
If a new unit is added to an army, all [ONE SHOT] weapons in that unit can be selected to make attacks with once per battle.
RAPID INGRESS15.07
1CP
Core Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.
TARGET: One friendly unit that is in strategic reserves (excluding AIRCRAFT).
EFFECT: Your unit makes an ingress move (20.04).
RESTRICTIONS: You cannot use this stratagem during the first battle round.
TARGET: One friendly unit that is in strategic reserves (excluding AIRCRAFT).
EFFECT: Your unit makes an ingress move (20.04).
RESTRICTIONS: You cannot use this stratagem during the first battle round.
03.04 Engagement
A model’s engagement range is the area of the battlefield within 2" horizontally and 5" vertically of it.
- While a friendly model is within engagement range of one or more enemy models, those models – and the units they belong to – are engaged with each other.
- While a unit contains no engaged models, that unit is unengaged.
WHAT IS ENGAGEMENT?
While opposing models are within each other’s engagement range, they are able to fight in vicious melee, so unless they are seeking to make melee attacks, models should keep out of their foes’ reach.
ENGAGEMENT
These two units have at least one model within 2" of the opposing unit, and are therefore engaged with each other.
FAQ
| Q: | Does my model or unit become engaged while moving through a enemy units engagement range during a move? |
| A: | No |
NORMAL MOVE09.05
MAXIMUM DISTANCE: Your unit’s M characteristic.
ELIGIBLE IF: Your unit is on the battlefield and unengaged.EFFECT: Your unit moves as described in Moving (03).
AFTER MOVING: Your unit must be unengaged.
[DEVASTATING WOUNDS]24.10
The most potent weapons strike with such power that they make a mockery of armour and can cleave through several foes.
Each time an attack made with a [DEVASTATING WOUNDS] weapon results in a critical wound, the attack sequence for that attack ends and the target unit suffers a number of mortal wounds equal to the D characteristic of that weapon. These are inflicted after resolving any normal damage inflicted by those attacks.Mortal wounds inflicted by [DEVASTATING WOUNDS] weapons can damage a maximum of one model for each critical wound; any remaining mortal wounds inflicted by that attack are lost.
Example: An attack made with a [DEVASTATING WOUNDS] weapon with a D characteristic of 3 results in a critical wound against an Intercessor Squad, so inflicts 3 mortal wounds. The first 2 mortal wounds are sufficient to destroy 1 Intercessor model, so the remaining mortal wound is lost.
05.02.01 Multiple Toughness Characteristics
When resolving attacks that target a unit in which the models have two or more different T characteristics, follow the first instruction that applies from below:- If the target unit is an attached unit, use the highest T characteristic amongst bodyguard models in that unit that are on the battlefield.
- Use the highest T characteristic amongst models in that unit that are on the battlefield.
Wound Roll
Make one wound roll for each hit by rolling one D6. For each result, check if it fails or is a wound by matching the first condition below that applies:
| ||||||||||||||||||||||||||||||
CRITICAL WOUNDS
Critical wounds are still wounds. In addition, other rules can be triggered by a critical wound, such as [DEVASTATING WOUNDS] (24).SEE ALSO
- Multiple Toughness Characteristics 05.02.01
06.02.01 Normal Damage
Normal Damage is damage that was inflicted on a model as a result of a weapon’s D characteristic, rather than by other means such as mortal wounds. Mortal wounds dealt in addition to normal damage from an attack are part of that same attack.
06.02 Mortal Wounds
Some attacks or rules inflict mortal wounds on units. Each time a unit suffers one or more mortal wounds, its controlling player must resolve the following sequence for each of those mortal wounds, until either all of them have been inflicted or that unit is destroyed:- Select Model: Select one model in that unit by following the first instruction below that applies:
If a non-CHARACTER model in that unit has lost one or more wounds, you must select that model. Otherwise, if that unit contains one or more non-CHARACTER models, you must select one of those models. Otherwise, if one or more CHARACTER models in that unit have lost one or more wounds, you must select one of those models. Otherwise, you must select one CHARACTER model in that unit. - Resolve Damage: The selected model loses 1 wound. If this reduces that model’s remaining wounds to 0, it is destroyed.
MORTAL WOUNDS AND NORMAL DAMAGE
When resolving attack dice, if those attacks inflict a mixture of both mortal wounds and normal damage, resolve all of the normal damage first, then resolve all of the mortal wounds.
SEE ALSO
- Normal Damage 06.02.01
FAQ
| Q: | I have a rule that triggers when a mortal wound is allocated to a model, when does this happen? |
| A: | When you select a model in the Select Model step of Mortal Wounds (06.02). |
ADVANCE MOVE09.06
MAXIMUM DISTANCE: Advance roll + your unit’s M characteristic.
ELIGIBLE IF: Your unit is on the battlefield and unengaged.EFFECT: Your unit moves as described in Moving (03).
BEFORE MOVING: Make an advance roll by rolling one D6.
AFTER MOVING:
- Your unit must be unengaged.
- Until the end of the turn, unless otherwise stated, your unit is not eligible to declare a charge or start an action.
01.07.01 Battlefield Morale
The morale and organisation of troops can waver and break during battle. This is checked using battle-shock rolls, most commonly in the Command phase. Failing such a roll represents the unit’s courage faltering due to taking casualties or through other disruption, reducing its battlefield effectiveness. Similarly, some rules will require you to check a unit’s readiness by making a leadership roll.
01.07 Battle-shock Rolls
To make a battle-shock roll for a unit, its controlling player makes a leadership roll for it (see above).- If that roll succeeds, that unit does not become battle-shocked.
- If that roll fails, that unit, and each model in it, is battle-shocked.
While a unit is battle-shocked:
- The Objective Control (OC) characteristic of all of its models is modified to ‘-’ (02.02).
- Its controlling player cannot target that unit with stratagems (15).
- It is not eligible to start an action (16), and any action it has started cannot be completed.
SEE ALSO
- Battlefield Morale 01.07.01
- Battle-shock Test 01.07.02
BATTLEFIELD MORALE
The morale and organisation of troops can waver and break during battle. This is checked using battle-shock rolls, most commonly in the Command phase. Failing such a roll represents the unit’s courage faltering due to taking casualties or through other disruption, reducing its battlefield effectiveness. Similarly, some rules will require you to check a unit’s readiness by making a leadership roll.FAQ
| Q: | If a unit has a rule that allows it to start an action when it is battle-shocked can it also continue doing that action if it becomes battle-shocked after starting an action? |
| A: | Yes |
| Q: | If a unit becomes battle-shocked after starting an action does it stop performing that action? |
| A: | Yes |
[HAZARDOUS]24.15
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder and those that stand beside them.
Each time a unit is selected to shoot or selected to fight, after that unit has resolved all of its attacks, make a number of hazard rolls (06.03) for that unit equal to the number of [HAZARDOUS] weapons you selected in the Select Weapons step.06.03 Hazard Rolls
To make a hazard roll for a unit, roll one D6: on a 1-2, that roll fails and that unit suffers 1 mortal wound, or 3 mortal wounds instead if each model in that unit is a MONSTER/VEHICLE model. If more than one hazard roll is required for a unit, make all of those rolls simultaneously.
FAQ
| Q: | I failed hazard rolls from [Hazardous] weapons, do those mortal wounds have to be allocated to the models with the [HAZARDOUS] weapons? |
| A: | No, you allocate the mortal wounds to the unit as per Mortal Wounds (06.02). (This represents Bob the guardsmen picking up his fallen squad mates plasma gun or that the twisting power of James the Chaos Sorcerer pulling his followers into the warp.) |
| Q: | If a rule says my unit must make a hazard roll does every model in the unit make a hazard roll? |
| A: | No, the unit would make 1 single hazard roll. |
[HAZARDOUS]24.15
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder and those that stand beside them.
Each time a unit is selected to shoot or selected to fight, after that unit has resolved all of its attacks, make a number of hazard rolls (06.03) for that unit equal to the number of [HAZARDOUS] weapons you selected in the Select Weapons step.FALL-BACK MOVE09.07
MAXIMUM DISTANCE: Your unit’s M characteristic.
ELIGIBLE IF: Your unit is engaged.EFFECT: Your unit moves as described in Moving (03).
BEFORE MOVING: Select fall-back mode:
- Ordered Retreat: If your unit is not battle-shocked, you can select this mode.
- Desperate Escape: Otherwise, you must select this mode. Make a hazard roll for each model in your unit (06.03).
- Desperate Escape: Each model that is moved can be moved through enemy models.
- Your unit must be unengaged.
- Until the end of the turn, unless otherwise stated, your unit is not eligible to shoot, declare a charge or start an action.
- Desperate Escape: If your unit is not battle-shocked, you must make a battle-shock roll for your unit (01.07).
HEROIC INTERVENTION15.11
1CP
Core Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: End of your opponent’s Charge phase.
TARGET: One friendly unengaged unit within 12" of one or more enemy units. You can only select a VEHICLE unit if it is a CHARACTER/WALKER unit.
EFFECT: Resolve a charge with your unit (11.02). While doing so, before making the charge roll, you must select one of the following modes:
TARGET: One friendly unengaged unit within 12" of one or more enemy units. You can only select a VEHICLE unit if it is a CHARACTER/WALKER unit.
EFFECT: Resolve a charge with your unit (11.02). While doing so, before making the charge roll, you must select one of the following modes:
- Leap to Defend: When selecting charge targets, you can only select enemy units that made a charge move this phase and are within the maximum distance.
+1CP
- Into the Fray:
- When making the charge roll, if the result is greater than 6 (after modifiers), change it to 6.
- When selecting charge targets, you can select any enemy units that are within 6" of your unit and within the maximum distance.
01.02.04 Not On The Battlefield
A unit that is embarked within a TRANSPORT or that is in strategic reserves is not on the battlefield. The following applies to such units:- That unit is not visible to any other units (units are visible to themselves).
- Any other unit is not visible to that unit.
- Players cannot measure distances to or from that unit (units are within range of their own abilities).
This means units not on the battlefield cannot be selected or targeted by any attack or rule that requires a unit to be visible or within a certain distance (other than their own abilities).
Such units can still use their other rules, and are still units in the controlling player’s army and so can be affected by rules that require a player to select a unit from an army, as well as rules that affect all units in an army.
The controlling player must make battle-shock rolls for units that are not on the battlefield in their Command phase if they are battle-shocked, or if they are at or below half-strength.
FIRING DECK24.14
Some transports have dedicated platforms or firing ports from which embarked passengers can lay down a withering hail of munitions.
This ability always takes the form Firing Deck X. In your Shooting phase, each time this TRANSPORT is selected to shoot, if one or more units are embarked within it, resolve the following sequence:- Select up to X models embarked within this TRANSPORT (excluding models whose units have already been selected to shoot this phase).
- For each selected model, select one of its ranged weapons (excluding [ONE SHOT] weapons).
- Until this TRANSPORT has resolved all of its attacks, it has all of those selected weapons in addition to its other weapons.
- Until the end of the turn, units embarked within this TRANSPORT are not eligible to shoot.
18.02 Embarking
Once the first battle round has started, a friendly unit can embark within a friendly TRANSPORT model after making a normal, advance or fall-back move, if all of the following conditions apply:- Each model in that unit is within 3" of that TRANSPORT.
- That unit was not set up on the battlefield this turn.
- That unit is eligible to embark within that TRANSPORT, as described on that TRANSPORT’s datasheet.
- That TRANSPORT has sufficient remaining transport capacity for each model in that unit.
When a unit embarks, the active player removes that unit from the battlefield and places it to one side – it is now embarked within that TRANSPORT and is not on the battlefield.
SEE ALSO
- Not on the Battlefield 01.02.04
FAQ
| Q: | Do a unit's abilities continue to function while they are embarked within a TRANSPORT? |
| A: | Yes, within the restrictions specified by the ability itself. Embarked units are Not On The Battlefield (01.02.04), so any ability requiring visibility or measurement to another unit will fail. Example: Azrael is attached to an Intercessor Squad unit and embarked within a TRANSPORT, and that TRANSPORT is making a shooting attack using the Firing Deck ability. While Azrael’s Supreme Grand Master ability is still technically active, it will have no effect, as the requirements of the ability are not met (the ability affects ‘weapons equipped by models’ in Azrael’s unit, and for the purposes of Firing Deck, the TRANSPORT itself is equipped with those weapons instead). |
Moving a Model in a Straight Line
Each time you move a model in a straight line, move it horizontally across the battlefield. Measure from the same point on its base at the start and end of that move, and add that distance to any other distance it has moved since its unit began that move. The distance moved cannot be greater than the maximum distance of that move type.
Rotating a Model
Each time you rotate a model, turn it any amount around the centre of its base, while keeping it upright. Note that rotating a model does not count towards the distance it has moved.
REMAIN STATIONARY09.04
MAXIMUM DISTANCE: ‘–’
ELIGIBLE IF: Any unit.EFFECT: No models are moved (either in straight lines or rotated). Units that remain stationary do not trigger any rules that are triggered when a unit starts or ends a move.
01.02.02 Persisting Rules Effects
Some rules apply an effect that lasts until a certain duration has passed (e.g. until the start of your next turn). Such effects are known as persisting effects.If a persisting effect applies to a unit when you place it in strategic reserves or when it embarks within a TRANSPORT, make a note of that effect and its duration; if that unit is set up on the battlefield again, any persisting effects continue to apply to that unit for their full duration.
If you have a rule that specifies when it is triggered (e.g. ‘In the Shooting phase’) and it does not specify how long it is active for, it is only active for the duration of that specified period (e.g. until the end of that Shooting phase). After that period, that effect is no longer applicable/active.
If a rule or effect is given to a unit and it does not specify how long it is active for, it is only active for the phase in which it was given.
DISEMBARK MOVE18.04
SET-UP DISTANCE:
- Rapid/Tactical Disembark: 3"
- Combat Disembark: 6"
ELIGIBLE IF: All of the following apply to your unit:- Rapid/Tactical Disembark: 3"
- Combat Disembark: 6"
- Embarked within a TRANSPORT model that is on the battlefield.
- Did not embark within that TRANSPORT this phase.
- That TRANSPORT has not made an advance or fall-back move this phase.
BEFORE MOVING: Select disembark mode:
- Rapid Disembark:If that TRANSPORT made a normal or ingress move this phase, you must select this mode.
- Tactical Disembark:Otherwise, If that TRANSPORT remained stationary or has not yet been selected to move this phase, and if you can set up your unit as described below, you must select this mode.
- Combat Disembark:Otherwise, you must select this mode. Make a hazard roll for each model in your unit.
- Rapid Disembark:If that TRANSPORT made an ingress move this turn, each model must follow the same rules that TRANSPORT had to follow while resolving that move.
- Combat Disembark:Each model can be set up engaged with one or more enemy units that TRANSPORT is engaged with.
- Rapid Disembark:Until the end of the turn, your unit is not eligible to declare a charge.
- Tactical Disembark:Select your unit to make a normal or advance move.
- Combat Disembark:Your unit is battle-shocked and, until the end of the turn, it is not eligible to declare a charge.
RAPID DISEMBARK
When a unit uses the rapid disembark mode after its TRANSPORT makes an ingress move, the models must follow the same rules and restrictions as that TRANSPORT did. For example, if that TRANSPORT had to be set up more than 8" from all enemy units and not within your opponent’s deployment zone, the same applies to the disembarking unit.18.03 Disembarking
In the active player’s Movement phase, each friendly unit embarked within a TRANSPORT model can disembark from it by making a disembark move (see below).If a TRANSPORT model is destroyed, before removing it from the battlefield, the active player must make an emergency disembark move (see below) with each unit embarked within it.
SEE ALSO
- Persisting Rules Effects 01.02.02
- Hazard Rolls 06.03
DISEMBARK MOVE18.04
SET-UP DISTANCE:
- Rapid/Tactical Disembark: 3"
- Combat Disembark: 6"
ELIGIBLE IF: All of the following apply to your unit:- Rapid/Tactical Disembark: 3"
- Combat Disembark: 6"
- Embarked within a TRANSPORT model that is on the battlefield.
- Did not embark within that TRANSPORT this phase.
- That TRANSPORT has not made an advance or fall-back move this phase.
BEFORE MOVING: Select disembark mode:
- Rapid Disembark:If that TRANSPORT made a normal or ingress move this phase, you must select this mode.
- Tactical Disembark:Otherwise, If that TRANSPORT remained stationary or has not yet been selected to move this phase, and if you can set up your unit as described below, you must select this mode.
- Combat Disembark:Otherwise, you must select this mode. Make a hazard roll for each model in your unit.
- Rapid Disembark:If that TRANSPORT made an ingress move this turn, each model must follow the same rules that TRANSPORT had to follow while resolving that move.
- Combat Disembark:Each model can be set up engaged with one or more enemy units that TRANSPORT is engaged with.
- Rapid Disembark:Until the end of the turn, your unit is not eligible to declare a charge.
- Tactical Disembark:Select your unit to make a normal or advance move.
- Combat Disembark:Your unit is battle-shocked and, until the end of the turn, it is not eligible to declare a charge.
RAPID DISEMBARK
When a unit uses the rapid disembark mode after its TRANSPORT makes an ingress move, the models must follow the same rules and restrictions as that TRANSPORT did. For example, if that TRANSPORT had to be set up more than 8" from all enemy units and not within your opponent’s deployment zone, the same applies to the disembarking unit.EMERGENCY DISEMBARK MOVE18.05
SET-UP DISTANCE: 6"
ELIGIBLE IF: Your unit is embarked within a TRANSPORT model that was just destroyed.EFFECT: Your unit is set up as described in Set Up (03.02).
BEFORE MOVING: Make a hazard roll for each model in your unit (06.03).
WHILE MOVING: Set up each model in your unit: (1) Wholly within the set-up distance of that TRANSPORT, and as close as possible to that TRANSPORT. OR: (2) If the above is not possible while remaining unengaged, set up that model wholly within the set-up distance of that TRANSPORT, as close as possible to that TRANSPORT, and engaged. Each model that still cannot be set up is destroyed.
AFTER MOVING: Your unit is battle-shocked and, until the end of the turn, it is not eligible to declare a charge.
ASSAULT DISEMBARK MOVE18.06
SET-UP DISTANCE: 3"
ELIGIBLE IF:- Embarked within a TRANSPORT on the battlefield
- Did not embark within that TRANSPORT this phase
- That TRANSPORT has not made an advance/fall-back move this phase
WHILE MOVING: Set up each model wholly within the set-up distance of that TRANSPORT.
SHOCK DISEMBARK MOVE18.07
SET-UP DISTANCE: 3"
ELIGIBLE IF:- Embarked within a TRANSPORT on the battlefield
- Did not embark within that TRANSPORT this phase
WHILE MOVING: Set up each model wholly within the set-up distance of that TRANSPORT.
AFTER MOVING: Each model that started this move engaged with an enemy unit must still be engaged with that enemy unit. If one or more enemy units engaged with your unit have not been selected to fight this phase, your opponent must select each of those units, one at a time; when each is selected, it becomes eligible to fight and is selected to fight.
FAQ
| Q: | If a unit makes any disembark move in a turn (i.e. Disembark move, Emergency Disembark move etc.) has it disembarked that turn? |
| A: | Yes. |
SNAP SHOOTING15.09
ELIGIBLE IF: As stated in the rule allowing this shooting type.
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
- You can only target one visible enemy unit within 24" of your unit (and only if it is an eligible target).
- Each attack only hits on an unmodified hit roll of 6 (irrespective of the attacking weapon’s BS characteristic or any modifiers).
- You cannot re-roll hit rolls.
FIRE OVERWATCH15.08
1CP
Core Stratagem
A hail of fire can drive back advancing foes.
WHEN: End of your opponent’s Movement phase.
TARGET: One friendly unengaged unit (excluding TITANIC units).
EFFECT: Your unit shoots using snap shooting.
TARGET: One friendly unengaged unit (excluding TITANIC units).
EFFECT: Your unit shoots using snap shooting.
The TYRANIDS and SYNAPSE keywords are used in the following Genestealer Cults datasheets:
Monster Character
Infantry
The TYRANIDS and VANGUARD INVADER keywords are used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Monster Character
Battleline
Dedicated Transports
Psionic Parasitism
Final Day Detachment
With each tug on the synaptic leash, the Hive Mind drains more of its hapless worshippers.
At the end of your Movement phase, for each TYRANIDS SYNAPSE unit from your army, you can select one friendly GENESTEALER CULTS unit (excluding PURESTRAIN GENESTEALER and PATRIARCH units) and one friendly TYRANIDS unit each within 9" of and visible to that SYNAPSE unit. If you do, that GENESTEALER CULTS unit from your army suffers D3+1 mortal wounds and one model in the selected TYRANIDS unit regains up to that many lost wounds and until the start of your next Movement phase, each time a model in the selected TYRANIDS unit makes an attack, add 1 to the Hit roll.TYRANIDS units from your army have the following ability:
Catalyst (Aura): While an enemy unit is within 6" of this unit, each time a friendly GENESTEALER CULTS unit makes an attack that targets that enemy unit, add 1 to the Hit roll.
The Star Children’s Blessings
You can include TYRANIDS VANGUARD INVADER units (excluding AIRCRAFT, BROODLORD and GENESTEALERS units) in your army. The combined points cost of such units depends on your battle size:
- Incursion: Up to 500 pts
- Strike Force: Up to 1000 pts
- Onslaught: Up to 1500 pts
No TYRANIDS models from your army can be your WARLORD.
FIGHTS FIRST24.13
Those possessed of lightning-fast reactions may strike before the opponent can react.
While every model in a unit has this ability, that unit is a Fights First unit.See the Resolve Fights First Combats step in the Fight phase (12.04).
Save Rolls
The opposing player resolves the following sequence:- Create Groups: Divide all models in the target unit into the following groups, as many times as required:
- One group for each CHARACTER model.
- One group for all other models with the same W, Sv and InSv characteristics.
- Allocation Order: Declare the order in which those groups will have attacks allocated to them, applying all of the following:
- If a non-CHARACTER group contains a model that has lost one or more wounds, that group must be first in the allocation order.
- No CHARACTER group can be earlier in the allocation order than a non-CHARACTER group.
- CHARACTER groups containing a model that has lost one or more wounds must be earlier in the allocation order than CHARACTER groups containing no wounded models.
- Make Save Rolls: The opposing player makes one save roll for each attack that wounded the target by rolling one D6.
FAQ
| Q: | When declaring the allocation order of groups in my unit I have more than one non-CHARACTER groups that contain a model with a missing wound, how must I select the order? |
| A: | Those groups can be selected in an order of your choosing but must be in an order that makes them come before any non-CHARACTER groups that do not contain a model with a missing wound. |
| Q: | I have a unit being attacked with weapons that will modify some of their save rolls to be worse then 6 should I make those save rolls? |
| A: | Yes, because other models in your unit may have Sv’s that are better those models you’ve mentioned, this means that enough save rolls could be allocated to the those models that the rest of the results are not greater then the Sv’s of the other models in your unit. |
| Q: | Can I group or allocate a wound to a destroyed model? |
| A: | No. |
The SYNAPSE keyword is used in the following Tyranids datasheets:
Monster Epic Hero
Infantry Character
Infantry
Before selecting targets for this weapon, select one of its profiles to make attacks with.
COMMAND RE-ROLL15.02
1CP
Core Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make one of the following rolls for a friendly unit or model:
TARGET: That unit or model.
EFFECT: You re-roll that roll. If you are rolling more than one dice together, select one of those dice to re-roll (excluding charge rolls, which you must re-roll in full).
- Advance roll
- Charge roll
- Damage roll
- Hazard roll
- Hit roll
- Save roll
- Wound roll
- A roll to determine the number of attacks generated with a weapon.
TARGET: That unit or model.
EFFECT: You re-roll that roll. If you are rolling more than one dice together, select one of those dice to re-roll (excluding charge rolls, which you must re-roll in full).
01.05.01 Automatically Successful/Passes/Hits/Wounds
When a dice roll or test is automatically successful or automatically passes/hits/wounds, do not roll the dice and instead move to the next step of the sequence for that roll as if the required result had been rolled. Any rules that take effect on a particular dice result or roll result do not take effect.Example: If a hit roll is automatically successful, move straight to the Wound Rolls step for that attack. Such a hit roll is not a critical hit.
Example: If a wound roll is automatically successful, move straight to the Save Rolls step for that attack. Such a wound roll is not a critical wound.
INSANE BRAVERY15.04
1CP
Core Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you make a battle-shock roll for a friendly unit.
TARGET: That unit.
EFFECT: That battle-shock roll is automatically successful.
RESTRICTIONS: You cannot use this stratagem more than once per battle.
TARGET: That unit.
EFFECT: That battle-shock roll is automatically successful.
RESTRICTIONS: You cannot use this stratagem more than once per battle.
COUNTEROFFENSIVE15.12
2CP
Core Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight step of your opponent’s Fight phase, just after an enemy unit has resolved its attacks.
TARGET: One friendly unit that is eligible to fight.
EFFECT: Until the end of the phase, your unit has the Fights First ability and it must be the next unit you select to fight (12.04).
TARGET: One friendly unit that is eligible to fight.
EFFECT: Until the end of the phase, your unit has the Fights First ability and it must be the next unit you select to fight (12.04).
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
[BLAST]24.05
High-explosive rounds can fell several warriors in a single blast, but firing them too close to comrades is unwise.
Each time you gather attack dice for a [BLAST] weapon, add one additional attack dice for every five models that were in the target unit in the Select Targets step (rounding down).If this ability takes the form [BLAST X], each time you gather attack dice for such a weapon, add X additional attack dice for every five models that were in the target unit in the Select Targets step (rounding down) instead.
Example: If a [BLAST 2] weapon with an A characteristic of 3 targets a unit containing 12 models, you would gather four additional attack dice for that weapon (for a total of seven for that weapon).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
RESISTANCE TUNNELS
1CP
Final Day – Strategic Ploy Stratagem
Never again will the tunnel networks of the cult provide secret roads for hopeful and idealistic freedom fighters. Yet they can still serve one last time as a means by which the Tyranids and their surviving worshippers can vanish from the battlefield only to strike again elsewhere.
WHEN: End of your opponent’s Fight phase.
TARGET: One GENESTEALER CULTS or TYRANIDS unit from your army that is not within Engagement Range of one or more enemy units.
EFFECT: Remove your unit from the battlefield and place it into Strategic Reserves.
TARGET: One GENESTEALER CULTS or TYRANIDS unit from your army that is not within Engagement Range of one or more enemy units.
EFFECT: Remove your unit from the battlefield and place it into Strategic Reserves.
EMERGENCY DISEMBARK MOVE18.05
SET-UP DISTANCE: 6"
ELIGIBLE IF: Your unit is embarked within a TRANSPORT model that was just destroyed.EFFECT: Your unit is set up as described in Set Up (03.02).
BEFORE MOVING: Make a hazard roll for each model in your unit (06.03).
WHILE MOVING: Set up each model in your unit: (1) Wholly within the set-up distance of that TRANSPORT, and as close as possible to that TRANSPORT. OR: (2) If the above is not possible while remaining unengaged, set up that model wholly within the set-up distance of that TRANSPORT, as close as possible to that TRANSPORT, and engaged. Each model that still cannot be set up is destroyed.
AFTER MOVING: Your unit is battle-shocked and, until the end of the turn, it is not eligible to declare a charge.
DEADLY DEMISE24.08
From detonating ammo stores to corrosive innards or frenzied death throes, some targets are deadly even in defeat.
This ability always takes the form Deadly Demise X. Each time a model with this ability is destroyed, after the units embarked within it (if any) have made their emergency disembark moves, roll one D6. On a 6, that model suffers a deadly demise; each unit within 6" of that model suffers a number of mortal wounds denoted by X (if this is a random number, roll separately for each unit within 6").CHARGE MOVE11.04
MAXIMUM DISTANCE: Charge roll.
ELIGIBLE IF: Your unit declared a charge this phase.EFFECT: Your unit moves as described in Moving (03).
BEFORE MOVING: Select one or more enemy units that are within 12" of your unit and within the maximum distance of your unit; until the end of this move, each of those enemy units is a charge target.
WHILE MOVING:
- Each model must end its move closer to one or more charge targets.
- Each model that can end its move within 1" of one or more charge targets must do so.
- Each model that can end its move engaged with one or more charge targets must do so.
- Your unit must be engaged with all of the charge targets.
- Your unit cannot be engaged with one or more enemy units that are not charge targets.
- Until the end of the turn, each model in your unit has the Fights First ability (24.13).
CRUSHING IMPACT15.06
1CP
Core Stratagem
In extremis, armoured vehicles and rampaging monsters can use their sheer size as a weapon, ramming and crushing enemies beneath their colossal bulk, though doing so risks sustaining damage in return.
WHEN: Your Charge phase, just after a friendly MONSTER/VEHICLE unit ends a charge move.
TARGET: That MONSTER/VEHICLE unit.
EFFECT: Resolve the following sequence:
TARGET: That MONSTER/VEHICLE unit.
EFFECT: Resolve the following sequence:
- Select one enemy unit engaged with your unit.
- Select one model in your unit engaged with that enemy unit.
- Roll a number of D6 equal to the T characteristic of that model: for each 1, your unit suffers 1 mortal wound; for each 5+, that enemy unit suffers 1 mortal wound (to a maximum of 6 mortal wounds per unit).
Errata
Tank Shock Stratagem
The Tank Shock Stratagem is the same as the Crushing Impact stratagem.
Synapse
Some Tyranids serve as synaptic conduits or nodal relays through which a portion of the Hive Mind’s iron will flows, overriding the natural instincts of the swarm to direct the teeming warrior-beasts to function as a single, gestalt organism on the battlefield.
If your Army Faction is TYRANIDS, while a TYRANIDS unit from your army is within 6" of one or more friendly SYNAPSE models, that TYRANIDS unit is said to be within Synapse Range of that model and of your army. While a TYRANIDS unit from your army is within Synapse Range of your army:- Each time that unit takes a Battle-shock test, take that test on 3D6 instead of 2D6.
- Each time a model in that unit makes a melee attack, add 1 to the Strength characteristic of that attack.
Errata
Synapse Army Rule
Change to: ‘If your Army Faction is TYRANIDS, while a TYRANIDS unit from your army is within 6" of one or more friendly SYNAPSE models, that TYRANIDS unit is said to be within Synapse Range of that model and of your army. While a TYRANIDS unit from your army is within Synapse Range of your army:
- Each time that unit takes a Battle-shock test, take that test on 3D6 instead of 2D6.
- Each time a model in that unit makes a melee attack, add 1 to the Strength characteristic of that attack.’
PSI SURGE
1CP
Final Day – Strategic Ploy Stratagem
As the Tyranid invasion gathers pace, the influence of the Hive Mind surges like waves rolling ever higher onto a desolate shore.
WHEN: Start of any phase.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the start of your next Command phase, increase the range of your unit’s Catalyst ability by 3".
RESTRICTIONS: Each time you use this Stratagem, until the end of your next Command phase, you cannot use this Stratagem again.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the start of your next Command phase, increase the range of your unit’s Catalyst ability by 3".
RESTRICTIONS: Each time you use this Stratagem, until the end of your next Command phase, you cannot use this Stratagem again.
DARTING ATTACKS
1CP
Final Day – Strategic Ploy Stratagem
Like predatory sea beasts lunging from wheeling shoals of fish, the vanguard organisms strike and fade from amidst the cultist hordes repeatedly, picking apart their overwhelmed prey.
WHEN: Your Shooting phase or your Charge phase.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the end of the phase, your unit is eligible to shoot and declare a charge in a turn in which it Fell Back.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the end of the phase, your unit is eligible to shoot and declare a charge in a turn in which it Fell Back.
18.01 Transport Capacity
TRANSPORT models have a transport capacity listed on their datasheet. This determines the type and maximum number of friendly models that are eligible to embark within them. More than one unit can be embarked within the same TRANSPORT model at the same time, provided it has sufficient transport capacity.Before the battle, in the Declare Battle Formations step, your units can start embarked within any friendly TRANSPORT model that has sufficient transport capacity remaining for the whole unit.
A friendly unit must be embarked within each friendly DEDICATED TRANSPORT model. At the end of this step, each friendly DEDICATED TRANSPORT model without an embarked unit is destroyed, but they do not trigger rules that are triggered when a model is destroyed.
The TYRANIDS and INFANTRY keywords are used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Battleline
The TYRANIDS and MONSTER keywords are used in the following Genestealer Cults datasheets:
Monster Epic Hero
Monster Character
Dedicated Transports