Genestealer Cults – Neurolictor
MELEE WEAPONS | RANGE | A | WS | S | AP | D | |
| Piercing claws and talons precision | |||||||
| Piercing claws and talons precision | Melee | 6 | 2+ | 6 | -2 | 1 | |
ABILITIES
CORE: Infiltrators, Lone Operative, Stealth
FACTION: Shadow in the Warp, Synapse
Feeder Tendrils: Each time this model destroys an enemy CHARACTER model, you gain 1CP.Neural Disruption: In your Command phase, select one enemy unit within 12" of this model. That unit must take a Battle-shock test.Psychological Saboteur (Aura): While an enemy unit is within 12" of this model, if that unit is Battle-shocked:
- Each time a model in that unit makes an attack, subtract 1 from the Hit roll.
- Each time a friendly TYRANIDS model makes an attack that targets that unit, add 1 to the Wound roll.
UNIT COMPOSITION
- 1 Neurolictor
| YOUR 1ST TO 2ND UNITS COST | |
| 1 model | 80 |
| YOUR 3RD + UNIT COSTS | |
| 1 model | 90 |
KEYWORDS: INFANTRY; GREAT DEVOURER; VANGUARD INVADER; SYNAPSE; NEUROLICTOR
FACTION KEYWORDS:
TYRANIDS
TYRANIDS
STRATAGEMS
COMMAND RE-ROLL
1CP
Core
C
INSANE BRAVERY
1CP
Core
C
FIRE OVERWATCH
1CP
Core
C
RAPID INGRESS
1CP
Core
C
HEROIC INTERVENTION
1CP
Core
C
COUNTEROFFENSIVE
2CP
Core
C
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed
BA
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed
BA
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic
BA
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy
BA
PSI SURGE
1CP
Final Day – Strategic Ploy
DARTING ATTACKS
1CP
Final Day – Strategic Ploy
RESISTANCE TUNNELS
1CP
Final Day – Strategic Ploy
DETACHMENT ABILITY
Psionic Parasitism
Errata
Neurolictor, Keywords Section
Add SYNAPSE.
INGRESS MOVE20.04
SET-UP DISTANCE: 6"
ELIGIBLE IF: Your unit is in strategic reserves (excluding units that are embarked within TRANSPORTS that are themselves in strategic reserves).EFFECT: Your unit is set up as described in Set Up (03.02).
BEFORE MOVING: Your unit is set up as described in Set Up (03.02).
WHILE MOVING: Set up your unit wholly within the set-up distance of one or more battlefield edges and more than 8" horizontally from all enemy units.
- Before the Third Battle Round: While doing so, no models can be set up within your opponent’s deployment zone.
05.04.04 Destroyed
Throughout a battle, models will suffer damage, lose wounds and be destroyed. When every model in a unit has been destroyed, that unit is destroyed.When a model is destroyed, first resolve any rules that are triggered when it is destroyed, then it is removed from the battlefield. If any such rules apply, and if the model was destroyed as the result of an attack, unless otherwise stated, those rules are only resolved and that model is only removed after the attacking unit’s attacks have been resolved. Unless otherwise stated, destroyed models and units cannot use abilities or be selected or targeted by rules.
Some rules only trigger if an enemy model or unit was destroyed by you, or by a model or unit from your army. This means that the enemy model or unit was destroyed by an attack made by a model from your army, or by a player rule you have. Enemy models or units that are destroyed by any other means are not destroyed by you, or by a model or unit from your army.
[LETHAL HITS]24.23
Many deadly weapons can inflict fatal injuries on any foe, no matter their resilience.
Each time an attack made with a [LETHAL HITS] weapon results in a critical hit, you can choose for that attack to automatically wound the target.Designer’s Note: Choosing to automatically wound the target means that no wound roll is made for that attack. You may decide against this, as it means that attack cannot result in a critical wound and so cannot trigger other abilities such as [DEVASTATING WOUNDS].
06.01 Visibility
Line of sight is used to determine visibility between models. For an observing model to have line of sight, it must be possible to draw an imaginary straight line, 1 mm wide, from any part of that model to any part of the model being observed. This line is the line of sight. While doing so, other models in the observing model’s unit and in the observed model’s unit are ignored.Other models and units can be either visible or fully visible to the observing model, as shown below. Note that terrain applies additional rules to visibility (13.07).
Model Visible
If any part of another model is visible to the observing model, that model is visible.
Model Fully Visible
If every part of another model that is facing the observing model is visible to the observing model (so the only thing blocking visibility to any part of that other model is that model itself), that model is fully visible.
Unit Visible
If one or more models in a unit are visible to the observing model, that unit is visible.
Unit Fully Visible
If every model in a unit is fully visible to the observing model, that unit is fully visible. When determining this, the observing model can see through other models in that unit.
FAQ
| Q: | When checking line of sight from one model to another, is this drawn between the bases of those models, or between any part of them? |
| A: | Line of sight is drawn from any part of the observing model to any part of the model being observed. |
SNAP SHOOTING15.09
ELIGIBLE IF: As stated in the rule allowing this shooting type.
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
- You can only target one visible enemy unit within 24" of your unit (and only if it is an eligible target).
- Each attack only hits on an unmodified hit roll of 6 (irrespective of the attacking weapon’s BS characteristic or any modifiers).
- You cannot re-roll hit rolls.
Hit Roll
Make one hit roll for each attack dice by rolling one D6. For each result, check if it fails or is a hit by matching the first condition below that applies:
|
CRITICAL HITS
Critical hits are still hits. In addition, other rules can be triggered by a critical hit, such as [LETHAL HITS] (24).FAQ
| Q: | My attack has a rule that means it results in a critical hit on a hit roll of 4+. Does this work when snap shooting? |
| A: | Unless otherwise stated, no: when snap shooting, each attack only hits on a roll of 6. |
| Q: | My attack has a rule that means it results in a critical hit on a hit roll of 4+, and I would otherwise need a 5+ to hit. Does a 4+ hit? |
| A: | Yes, except when snap shooting: when snap shooting, each attack only hits on a roll of 6. |
13.01 Placing Terrain
Before the battle, place a selection of terrain features on the battlefield using one or more of the following methods:- Place a well-defined boundary (such as a base or mat) in each location you want to furnish with terrain, then place one or more terrain features wholly within that boundary.
- Place one terrain feature directly on the battlefield.
- Place two or more terrain features directly on the battlefield in such a way that together they define the boundary of an area.
In each case, the area of the battlefield occupied by that boundary or terrain feature is known as a terrain area. A mission’s deployment map may define the location and dimensions of each terrain area. Otherwise, players must agree on this before the battle.
FAQ
| Q: | Are models that are within the boundary of a terrain area, but not on the ground floor of a terrain area (e.g. overhanging parts of FRAME VEHICLES or models on terrain features that are within that terrain area) within that terrain area? |
| A: | Yes |
The GENESTEALER CULTS keyword is used in the following Genestealer Cults datasheets:
Infantry Character
Mounted Character
Dedicated Transports
Mounted
Transport
Vehicle
Fortifications
The GREAT DEVOURER keyword is used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Infantry Character
Monster Character
Mounted Character
Battleline
Infantry
Mounted
Transport
Vehicle
The INFANTRY keyword is used in the following Genestealer Cults datasheets:
Infantry Character
Battleline
Infantry
The SYNAPSE keyword is used in the following Genestealer Cults datasheets:
Monster Character
Infantry
The TYRANIDS keyword is used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Monster Character
Battleline
Dedicated Transports
The VANGUARD INVADER keyword is used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Monster Character
Battleline
Dedicated Transports
RAPID INGRESS15.07
1CP
Core Stratagem
Be it cunning strategy, potent technology or supernatural ritual, there are many means by which a commander may hasten their warriors’ onset.
WHEN: End of your opponent’s Movement phase.
TARGET: One friendly unit that is in strategic reserves (excluding AIRCRAFT).
EFFECT: Your unit makes an ingress move (20.04).
RESTRICTIONS: You cannot use this stratagem during the first battle round.
TARGET: One friendly unit that is in strategic reserves (excluding AIRCRAFT).
EFFECT: Your unit makes an ingress move (20.04).
RESTRICTIONS: You cannot use this stratagem during the first battle round.
13.08 Benefit of Cover
Each time a ranged attack targets a unit, if every model in that unit meets one or more of the following conditions, that unit has the benefit of cover against that attack:- That model has the INFANTRY/BEASTS/SWARM keyword and is within a terrain area.
- That model is not fully visible to the attacking model due to one or more intervening terrain features and/or one or more intervening obscuring terrain areas (see below).
Each time a ranged attack targets a unit that has the benefit of cover against it, worsen the BS characteristic of that attack by 1.
FAQ
| Q: | When my unit shoots at another unit, how does it work if some models in the target unit are fully visible to some models in my unit, while others are within a terrain area/not fully visible? |
| A: | For each attacking model in your unit, determine whether the target unit has the benefit of cover, as described in Terrain and Visibility. In this scenario, the target unit will likely have the benefit of cover against some of the attacking models, but not all. This means that, in an example unit where all attacking models are using the same weapon, when you get to the Resolve Attacks step of the Attack Sequence, you will collect dice for attacks made by models against which the target unit has the benefit of cover separately from the dice for attacks made by models against which the target unit does not have the benefit of cover. |
STEALTH24.33
The stealthiest warriors can evade the attentions, and the bullets, of their foes.
If every model in a unit has this ability, each time a ranged attack targets that unit, that unit has the benefit of cover against that attack (13.08).03.04 Engagement
A model’s engagement range is the area of the battlefield within 2" horizontally and 5" vertically of it.
- While a friendly model is within engagement range of one or more enemy models, those models – and the units they belong to – are engaged with each other.
- While a unit contains no engaged models, that unit is unengaged.
WHAT IS ENGAGEMENT?
While opposing models are within each other’s engagement range, they are able to fight in vicious melee, so unless they are seeking to make melee attacks, models should keep out of their foes’ reach.
ENGAGEMENT
These two units have at least one model within 2" of the opposing unit, and are therefore engaged with each other.
FAQ
| Q: | Does my model or unit become engaged while moving through a enemy units engagement range during a move? |
| A: | No |
[DEVASTATING WOUNDS]24.10
The most potent weapons strike with such power that they make a mockery of armour and can cleave through several foes.
Each time an attack made with a [DEVASTATING WOUNDS] weapon results in a critical wound, the attack sequence for that attack ends and the target unit suffers a number of mortal wounds equal to the D characteristic of that weapon. These are inflicted after resolving any normal damage inflicted by those attacks.Mortal wounds inflicted by [DEVASTATING WOUNDS] weapons can damage a maximum of one model for each critical wound; any remaining mortal wounds inflicted by that attack are lost.
Example: An attack made with a [DEVASTATING WOUNDS] weapon with a D characteristic of 3 results in a critical wound against an Intercessor Squad, so inflicts 3 mortal wounds. The first 2 mortal wounds are sufficient to destroy 1 Intercessor model, so the remaining mortal wound is lost.
05.02.01 Multiple Toughness Characteristics
When resolving attacks that target a unit in which the models have two or more different T characteristics, follow the first instruction that applies from below:- If the target unit is an attached unit, use the highest T characteristic amongst bodyguard models in that unit that are on the battlefield.
- Use the highest T characteristic amongst models in that unit that are on the battlefield.
Wound Roll
Make one wound roll for each hit by rolling one D6. For each result, check if it fails or is a wound by matching the first condition below that applies:
| ||||||||||||||||||||||||||||||
CRITICAL WOUNDS
Critical wounds are still wounds. In addition, other rules can be triggered by a critical wound, such as [DEVASTATING WOUNDS] (24).SEE ALSO
- Multiple Toughness Characteristics 05.02.01
06.02.01 Normal Damage
Normal Damage is damage that was inflicted on a model as a result of a weapon’s D characteristic, rather than by other means such as mortal wounds. Mortal wounds dealt in addition to normal damage from an attack are part of that same attack.
06.02 Mortal Wounds
Some attacks or rules inflict mortal wounds on units. Each time a unit suffers one or more mortal wounds, its controlling player must resolve the following sequence for each of those mortal wounds, until either all of them have been inflicted or that unit is destroyed:- Select Model: Select one model in that unit by following the first instruction below that applies:
If a non-CHARACTER model in that unit has lost one or more wounds, you must select that model. Otherwise, if that unit contains one or more non-CHARACTER models, you must select one of those models. Otherwise, if one or more CHARACTER models in that unit have lost one or more wounds, you must select one of those models. Otherwise, you must select one CHARACTER model in that unit. - Resolve Damage: The selected model loses 1 wound. If this reduces that model’s remaining wounds to 0, it is destroyed.
MORTAL WOUNDS AND NORMAL DAMAGE
When resolving attack dice, if those attacks inflict a mixture of both mortal wounds and normal damage, resolve all of the normal damage first, then resolve all of the mortal wounds.
SEE ALSO
- Normal Damage 06.02.01
FAQ
| Q: | I have a rule that triggers when a mortal wound is allocated to a model, when does this happen? |
| A: | When you select a model in the Select Model step of Mortal Wounds (06.02). |
ADVANCE MOVE09.06
MAXIMUM DISTANCE: Advance roll + your unit’s M characteristic.
ELIGIBLE IF: Your unit is on the battlefield and unengaged.EFFECT: Your unit moves as described in Moving (03).
BEFORE MOVING: Make an advance roll by rolling one D6.
AFTER MOVING:
- Your unit must be unengaged.
- Until the end of the turn, unless otherwise stated, your unit is not eligible to declare a charge or start an action.
01.07.01 Battlefield Morale
The morale and organisation of troops can waver and break during battle. This is checked using battle-shock rolls, most commonly in the Command phase. Failing such a roll represents the unit’s courage faltering due to taking casualties or through other disruption, reducing its battlefield effectiveness. Similarly, some rules will require you to check a unit’s readiness by making a leadership roll.
01.07 Battle-shock Rolls
To make a battle-shock roll for a unit, its controlling player makes a leadership roll for it (see above).- If that roll succeeds, that unit does not become battle-shocked.
- If that roll fails, that unit, and each model in it, is battle-shocked.
While a unit is battle-shocked:
- The Objective Control (OC) characteristic of all of its models is modified to ‘-’ (02.02).
- Its controlling player cannot target that unit with stratagems (15).
- It is not eligible to start an action (16), and any action it has started cannot be completed.
SEE ALSO
- Battlefield Morale 01.07.01
- Battle-shock Test 01.07.02
BATTLEFIELD MORALE
The morale and organisation of troops can waver and break during battle. This is checked using battle-shock rolls, most commonly in the Command phase. Failing such a roll represents the unit’s courage faltering due to taking casualties or through other disruption, reducing its battlefield effectiveness. Similarly, some rules will require you to check a unit’s readiness by making a leadership roll.FAQ
| Q: | If a unit has a rule that allows it to start an action when it is battle-shocked can it also continue doing that action if it becomes battle-shocked after starting an action? |
| A: | Yes |
| Q: | If a unit becomes battle-shocked after starting an action does it stop performing that action? |
| A: | Yes |
[HAZARDOUS]24.15
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder and those that stand beside them.
Each time a unit is selected to shoot or selected to fight, after that unit has resolved all of its attacks, make a number of hazard rolls (06.03) for that unit equal to the number of [HAZARDOUS] weapons you selected in the Select Weapons step.06.03 Hazard Rolls
To make a hazard roll for a unit, roll one D6: on a 1-2, that roll fails and that unit suffers 1 mortal wound, or 3 mortal wounds instead if each model in that unit is a MONSTER/VEHICLE model. If more than one hazard roll is required for a unit, make all of those rolls simultaneously.
FAQ
| Q: | I failed hazard rolls from [Hazardous] weapons, do those mortal wounds have to be allocated to the models with the [HAZARDOUS] weapons? |
| A: | No, you allocate the mortal wounds to the unit as per Mortal Wounds (06.02). (This represents Bob the guardsmen picking up his fallen squad mates plasma gun or that the twisting power of James the Chaos Sorcerer pulling his followers into the warp.) |
| Q: | If a rule says my unit must make a hazard roll does every model in the unit make a hazard roll? |
| A: | No, the unit would make 1 single hazard roll. |
[HAZARDOUS]24.15
Weapons powered by unstable and dangerous energy sources pose a substantial risk to the wielder and those that stand beside them.
Each time a unit is selected to shoot or selected to fight, after that unit has resolved all of its attacks, make a number of hazard rolls (06.03) for that unit equal to the number of [HAZARDOUS] weapons you selected in the Select Weapons step.INFILTRATORS24.20
Many armies employ reconnaissance units who can sit concealed, waiting for the right moment to strike.
During deployment, if every model in a unit has this ability, it can be set up anywhere on the battlefield that is more than 8" horizontally from your opponent’s deployment zone and all enemy units.HEROIC INTERVENTION15.11
1CP
Core Stratagem
Voices raised in furious war cries, your warriors surge forth to meet the enemy’s onslaught head-on.
WHEN: End of your opponent’s Charge phase.
TARGET: One friendly unengaged unit within 12" of one or more enemy units. You can only select a VEHICLE unit if it is a CHARACTER/WALKER unit.
EFFECT: Resolve a charge with your unit (11.02). While doing so, before making the charge roll, you must select one of the following modes:
TARGET: One friendly unengaged unit within 12" of one or more enemy units. You can only select a VEHICLE unit if it is a CHARACTER/WALKER unit.
EFFECT: Resolve a charge with your unit (11.02). While doing so, before making the charge roll, you must select one of the following modes:
- Leap to Defend: When selecting charge targets, you can only select enemy units that made a charge move this phase and are within the maximum distance.
+1CP
- Into the Fray:
- When making the charge roll, if the result is greater than 6 (after modifiers), change it to 6.
- When selecting charge targets, you can select any enemy units that are within 6" of your unit and within the maximum distance.
SNAP SHOOTING15.09
ELIGIBLE IF: As stated in the rule allowing this shooting type.
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
EFFECT: Your unit shoots as described in Making Attacks (04).
WHILE SHOOTING:
- You can only target one visible enemy unit within 24" of your unit (and only if it is an eligible target).
- Each attack only hits on an unmodified hit roll of 6 (irrespective of the attacking weapon’s BS characteristic or any modifiers).
- You cannot re-roll hit rolls.
FIRE OVERWATCH15.08
1CP
Core Stratagem
A hail of fire can drive back advancing foes.
WHEN: End of your opponent’s Movement phase.
TARGET: One friendly unengaged unit (excluding TITANIC units).
EFFECT: Your unit shoots using snap shooting.
TARGET: One friendly unengaged unit (excluding TITANIC units).
EFFECT: Your unit shoots using snap shooting.
The TYRANIDS and SYNAPSE keywords are used in the following Genestealer Cults datasheets:
Monster Character
Infantry
The TYRANIDS and VANGUARD INVADER keywords are used in the following Genestealer Cults datasheets:
Infantry Epic Hero
Monster Epic Hero
Monster Character
Battleline
Dedicated Transports
Psionic Parasitism
Final Day Detachment
With each tug on the synaptic leash, the Hive Mind drains more of its hapless worshippers.
At the end of your Movement phase, for each TYRANIDS SYNAPSE unit from your army, you can select one friendly GENESTEALER CULTS unit (excluding PURESTRAIN GENESTEALER and PATRIARCH units) and one friendly TYRANIDS unit each within 9" of and visible to that SYNAPSE unit. If you do, that GENESTEALER CULTS unit from your army suffers D3+1 mortal wounds and one model in the selected TYRANIDS unit regains up to that many lost wounds and until the start of your next Movement phase, each time a model in the selected TYRANIDS unit makes an attack, add 1 to the Hit roll.TYRANIDS units from your army have the following ability:
Catalyst (Aura): While an enemy unit is within 6" of this unit, each time a friendly GENESTEALER CULTS unit makes an attack that targets that enemy unit, add 1 to the Hit roll.
The Star Children’s Blessings
You can include TYRANIDS VANGUARD INVADER units (excluding AIRCRAFT, BROODLORD and GENESTEALERS units) in your army. The combined points cost of such units depends on your battle size:
- Incursion: Up to 500 pts
- Strike Force: Up to 1000 pts
- Onslaught: Up to 1500 pts
No TYRANIDS models from your army can be your WARLORD.
FIGHTS FIRST24.13
Those possessed of lightning-fast reactions may strike before the opponent can react.
While every model in a unit has this ability, that unit is a Fights First unit.See the Resolve Fights First Combats step in the Fight phase (12.04).
Save Rolls
The opposing player resolves the following sequence:- Create Groups: Divide all models in the target unit into the following groups, as many times as required:
- One group for each CHARACTER model.
- One group for all other models with the same W, Sv and InSv characteristics.
- Allocation Order: Declare the order in which those groups will have attacks allocated to them, applying all of the following:
- If a non-CHARACTER group contains a model that has lost one or more wounds, that group must be first in the allocation order.
- No CHARACTER group can be earlier in the allocation order than a non-CHARACTER group.
- CHARACTER groups containing a model that has lost one or more wounds must be earlier in the allocation order than CHARACTER groups containing no wounded models.
- Make Save Rolls: The opposing player makes one save roll for each attack that wounded the target by rolling one D6.
FAQ
| Q: | When declaring the allocation order of groups in my unit I have more than one non-CHARACTER groups that contain a model with a missing wound, how must I select the order? |
| A: | Those groups can be selected in an order of your choosing but must be in an order that makes them come before any non-CHARACTER groups that do not contain a model with a missing wound. |
| Q: | I have a unit being attacked with weapons that will modify some of their save rolls to be worse then 6 should I make those save rolls? |
| A: | Yes, because other models in your unit may have Sv’s that are better those models you’ve mentioned, this means that enough save rolls could be allocated to the those models that the rest of the results are not greater then the Sv’s of the other models in your unit. |
| Q: | Can I group or allocate a wound to a destroyed model? |
| A: | No. |
The SYNAPSE keyword is used in the following Tyranids datasheets:
Monster Epic Hero
Infantry Character
Infantry
Before selecting targets for this weapon, select one of its profiles to make attacks with.
COMMAND RE-ROLL15.02
1CP
Core Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you make one of the following rolls for a friendly unit or model:
TARGET: That unit or model.
EFFECT: You re-roll that roll. If you are rolling more than one dice together, select one of those dice to re-roll (excluding charge rolls, which you must re-roll in full).
- Advance roll
- Charge roll
- Damage roll
- Hazard roll
- Hit roll
- Save roll
- Wound roll
- A roll to determine the number of attacks generated with a weapon.
TARGET: That unit or model.
EFFECT: You re-roll that roll. If you are rolling more than one dice together, select one of those dice to re-roll (excluding charge rolls, which you must re-roll in full).
01.05.01 Automatically Successful/Passes/Hits/Wounds
When a dice roll or test is automatically successful or automatically passes/hits/wounds, do not roll the dice and instead move to the next step of the sequence for that roll as if the required result had been rolled. Any rules that take effect on a particular dice result or roll result do not take effect.Example: If a hit roll is automatically successful, move straight to the Wound Rolls step for that attack. Such a hit roll is not a critical hit.
Example: If a wound roll is automatically successful, move straight to the Save Rolls step for that attack. Such a wound roll is not a critical wound.
INSANE BRAVERY15.04
1CP
Core Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just before you make a battle-shock roll for a friendly unit.
TARGET: That unit.
EFFECT: That battle-shock roll is automatically successful.
RESTRICTIONS: You cannot use this stratagem more than once per battle.
TARGET: That unit.
EFFECT: That battle-shock roll is automatically successful.
RESTRICTIONS: You cannot use this stratagem more than once per battle.
05.04.01 Current Allocation Group
The first group in the allocation order begins as the current group. Once all models in an allocation group are destroyed, the next group in the allocation order becomes the current one.
[PRECISION]24.28
Precision attacks can pick high-value targets out in a crowd.
While resolving attacks made with one or more [PRECISION] weapons, at the start of the Allocation Order step (05.03), if the target unit contains one or more CHARACTER models visible to one or more of the attacking models, the active player can select one allocation group that contains one of those visible CHARACTER models. If they do, until those attacks are resolved, or until that CHARACTER group is destroyed (whichever happens first), that CHARACTER group is the current allocation group.COUNTEROFFENSIVE15.12
2CP
Core Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight step of your opponent’s Fight phase, just after an enemy unit has resolved its attacks.
TARGET: One friendly unit that is eligible to fight.
EFFECT: Until the end of the phase, your unit has the Fights First ability and it must be the next unit you select to fight (12.04).
TARGET: One friendly unit that is eligible to fight.
EFFECT: Until the end of the phase, your unit has the Fights First ability and it must be the next unit you select to fight (12.04).
COMMAND RE-ROLL
1CP
Boarding Actions – Epic Deed Stratagem
A great commander can bend even the vagaries of fate and fortune to their will, the better to ensure victory.
WHEN: Any phase, just after you have made a Hit roll, a Wound roll, a Damage roll, a saving throw, an Advance roll, a Charge roll, a Desperate Escape test, a Hazardous test, or just after you have rolled the dice to determine the number of attacks made with a weapon, for an attack, model or unit from your army.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
TARGET: That unit or model from your army.
EFFECT: You re-roll that roll, test or saving throw.
INSANE BRAVERY
1CP
Boarding Actions – Epic Deed Stratagem
Indifferent to their own survival, these warriors hold their ground against seemingly impossible odds.
WHEN: Battle-shock step of your Command phase, just after you have failed a Battle-shock test taken for a unit from your army.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
TARGET: The unit from your army that Battle-shock test was just taken for (even though your Battle-shocked units cannot normally be affected by your Stratagems).
EFFECT: Your unit is treated as having passed that test instead, and is not Battle-shocked as a result.
[BLAST]24.05
High-explosive rounds can fell several warriors in a single blast, but firing them too close to comrades is unwise.
Each time you gather attack dice for a [BLAST] weapon, add one additional attack dice for every five models that were in the target unit in the Select Targets step (rounding down).If this ability takes the form [BLAST X], each time you gather attack dice for such a weapon, add X additional attack dice for every five models that were in the target unit in the Select Targets step (rounding down) instead.
Example: If a [BLAST 2] weapon with an A characteristic of 3 targets a unit containing 12 models, you would gather four additional attack dice for that weapon (for a total of seven for that weapon).
EXPLOSIVE CLEARANCE
1CP
Boarding Actions – Battle Tactic Stratagem
A well-placed explosive munition in confined shipboard spaces can cause bloody carnage.
WHEN: Your Shooting phase.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
TARGET: One unit from your army that has not been selected to shoot this phase.
EFFECT: Select one model in your unit that is equipped with a weapon with the [BLAST] ability. Until the end of the phase, when determining how many models are in the target unit for the purpose of that ability, include models that are not visible to the attacking model. In addition, attacks made with that weapon can be allocated to models that are not visible to the attacking model.
COUNTER-OFFENSIVE
2CP
Boarding Actions – Strategic Ploy Stratagem
In close-quarters combat, the slightest hesitation can leave an opening for a swift foe to exploit.
WHEN: Fight phase, just after an enemy unit has fought.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
TARGET: One unit from your army that is within Engagement Range of one or more enemy units and that has not already been selected to fight this phase.
EFFECT: Your unit fights next.
RESISTANCE TUNNELS
1CP
Final Day – Strategic Ploy Stratagem
Never again will the tunnel networks of the cult provide secret roads for hopeful and idealistic freedom fighters. Yet they can still serve one last time as a means by which the Tyranids and their surviving worshippers can vanish from the battlefield only to strike again elsewhere.
WHEN: End of your opponent’s Fight phase.
TARGET: One GENESTEALER CULTS or TYRANIDS unit from your army that is not within Engagement Range of one or more enemy units.
EFFECT: Remove your unit from the battlefield and place it into Strategic Reserves.
TARGET: One GENESTEALER CULTS or TYRANIDS unit from your army that is not within Engagement Range of one or more enemy units.
EFFECT: Remove your unit from the battlefield and place it into Strategic Reserves.
LONE OPERATIVE24.24
Assassins and other covert agents are difficult to pinpoint in the storm of battle.
Unless part of an attached unit, this unit is not visible to enemy models unless they are within 12" of this unit, and it cannot be targeted by [INDIRECT FIRE] weapons unless the attacking model is within 12" of this unit.If this ability takes the form Lone Operative X", unless part of an attached unit, this unit is not visible to enemy models unless they are within X" of this unit, and it cannot be targeted by [INDIRECT FIRE] weapons unless the attacking model is within X" of this unit.
Synapse
Some Tyranids serve as synaptic conduits or nodal relays through which a portion of the Hive Mind’s iron will flows, overriding the natural instincts of the swarm to direct the teeming warrior-beasts to function as a single, gestalt organism on the battlefield.
If your Army Faction is TYRANIDS, while a TYRANIDS unit from your army is within 6" of one or more friendly SYNAPSE models, that TYRANIDS unit is said to be within Synapse Range of that model and of your army. While a TYRANIDS unit from your army is within Synapse Range of your army:- Each time that unit takes a Battle-shock test, take that test on 3D6 instead of 2D6.
- Each time a model in that unit makes a melee attack, add 1 to the Strength characteristic of that attack.
Errata
Synapse Army Rule
Change to: ‘If your Army Faction is TYRANIDS, while a TYRANIDS unit from your army is within 6" of one or more friendly SYNAPSE models, that TYRANIDS unit is said to be within Synapse Range of that model and of your army. While a TYRANIDS unit from your army is within Synapse Range of your army:
- Each time that unit takes a Battle-shock test, take that test on 3D6 instead of 2D6.
- Each time a model in that unit makes a melee attack, add 1 to the Strength characteristic of that attack.’
PSI SURGE
1CP
Final Day – Strategic Ploy Stratagem
As the Tyranid invasion gathers pace, the influence of the Hive Mind surges like waves rolling ever higher onto a desolate shore.
WHEN: Start of any phase.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the start of your next Command phase, increase the range of your unit’s Catalyst ability by 3".
RESTRICTIONS: Each time you use this Stratagem, until the end of your next Command phase, you cannot use this Stratagem again.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the start of your next Command phase, increase the range of your unit’s Catalyst ability by 3".
RESTRICTIONS: Each time you use this Stratagem, until the end of your next Command phase, you cannot use this Stratagem again.
DARTING ATTACKS
1CP
Final Day – Strategic Ploy Stratagem
Like predatory sea beasts lunging from wheeling shoals of fish, the vanguard organisms strike and fade from amidst the cultist hordes repeatedly, picking apart their overwhelmed prey.
WHEN: Your Shooting phase or your Charge phase.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the end of the phase, your unit is eligible to shoot and declare a charge in a turn in which it Fell Back.
TARGET: One TYRANIDS unit from your army.
EFFECT: Until the end of the phase, your unit is eligible to shoot and declare a charge in a turn in which it Fell Back.
Shadow in the Warp
Tyranids flood the battlefield with the psychic signature of the hive fleet - an icy, alien dread that gnaws at the minds of their prey and smothers even the most stalwart courage. When faced with such unfathomable horror, many are driven insane or suffer catastrophic neural damage.
If your Army Faction is TYRANIDS, once per battle, in either player’s Command phase, if one or more units from your army with this ability are on the battlefield, you can unleash the Shadow in the Warp. When you do, each enemy unit on the battlefield must take a Battle-shock test. Each time an enemy unit takes such a Battle-shock test, if it is within 6" of one or more SYNAPSE units from your army, subtract 1 from that test.FAQ / Errata
FAQ
| Q: | Can units targeted by the Shadow in the Warp army rule use the Insane Bravery Stratagem? |
| A: | No. Insane Bravery can only be used in your Command phase. |
Errata
Shadow in the Warp Army Rule
Change to: ‘If your Army Faction is TYRANIDS, once per battle, in either player’s Command phase, if one or more units from your army with this ability are on the battlefield, you can unleash the Shadow in the Warp. When you do, each enemy unit on the battlefield must take a Battle-shock test. Each time an enemy unit takes such a Battle-shock test, if it is within 6" of one or more SYNAPSE units from your army, subtract 1 from that test.’