Forces of the Taghmata – Castellax Battle Maniple
 ]

This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
Castellax Battle Maniple
UNIT COMPOSITION: 2 CASTELLAX
100 PointsPts
• May include up to 8 additional Castellax at +50 Points per Model.

The robust castellax is the most widely used combat automata in the ranks of the Cybernetica. Its combination of powerful short range weaponry’ and toughened armour has been proven on thousands of battlefields and against uncounted foes, and few magi would dare to impugn such a venerable design. On the battlefield these hulking automata serve as the iron frontline of any Taghmata, advancing en-masse to break enemy lines like a hammer, or standing in serried ranks as an unyielding defence against any attack.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Castellax (⌀60mm) 7 12 4 4
Castellax (⌀60mm) 6 3 3 6 6 4 3 2 7 12 4 4 3+ 6+
WARGEAR
  • Two bolters
  • Mauler bolt cannon
  • Shock chargers
TRAITS
  • [Allegiance]
  • Cybernetica
SPECIAL RULES
  • Bulky (4)
  • Implacable Advance
  • Explodes (6+)
  • Firing Protocols (3)
  • Firestorm
  • Phased Refractor Shields
TYPE
  • Automata
OPTIONS
  • Any Model in this Unit may have its shock chargers exchanged for one pair of power blades for +10 Points per Model.
  • Any Model in this Unit may have one or both of its bolters each exchanged for one flamer for +5 Points per Weapon.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Firing Protocols (X)

By skill, technological aid or sheer brute strength, this warrior is capable of making use of more than one weapon when engaging the foe at range. Though far from efficient, such an assault is capable of overwhelming the foe with sheer firepower.

A Model with the Firing Protocols (X) Special Rule may attack with more than one ranged Weapon.

A Model with the Firing Protocols (X) Special Rule that makes attacks as part of a Shooting Attack, may make attacks with a number of Weapons equal to the value of X attached to the specific variant of the Firing Protocols (X) Special Rule. The Model must have more than one Ranged Weapon to make use of this Special Rule and may not use the same Weapon more than once in the same Shooting Attack.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Breaching (X)

Designed to pierce the armour worn by heavy infantry, some weapons have gained a fearsome reputation on the battlefields of the Floras Heresy. While many such weapons are rare or temperamental in use, the sheer power of their attacks more than makes up for this.

With a Weapon that has the Breaching (X) Special Rule there is a chance that a Wound Test may result in the Wound ignoring Armour Saves.

When any Wound Test is made for an attack with the Breaching (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Breaching (X) Special Rule, then if a wound is inflicted by that Wound Test, that wound becomes a ‘Breaching Wound’.

A Breaching Wound is always treated as having an AP Characteristic of 2 regardless of the Characteristics of the Weapon used to make the attack.
Shred (X)

Designed to rip and tear flesh, some weapons are fearsome and intimidating tools of warfare. Whether by the gnashing teeth of a chainblade or the jagged edges of flechette ammunition, these weapons scythe great holes in the lines of even the toughest of infantry and the largest of warriors.

Attacks made with the Shred (X) Special Rule can sometimes inflict an extra point of Damage.

When any Wound Test is made for an attack with the Shred (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Shred (X) Special Rule, then if a wound is inflicted by that Wound Test, the Damage Characteristic of that wound is increased by 1. Note that the Shred (X) Special Rule may only be triggered by a Wound Test and has no effect when making an Armour Penetration Test.
Pinning (X)

The crack of the sniper’s rifle or the burst of heavy artillery, both signal a sudden and indiscriminate death and send infantry scurrying for cover. Such weapons are meant as much to pin the foe in place as to kill them, breaking up advancing ranks of troops and shattering defensive formations.

Weapons and other attacks that have the Pinning (X) Special Rule have a chance of inflicting the Pinned Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Cool Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Pinned Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Cool Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule, if the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.
Template

Template weapons shoot clouds of fire, gas or other lethal substances, rather than shells or bullets.

Weapons and attacks with the Template Special Rule use the Flame Template to determine how many Models they Hit.

When making attacks for a Weapon or other effect that has the Template Special Rule, or otherwise uses a Template, no Hit Tests are made for the attack. Instead, when directed to make Hit Tests for such an attack, a single Template is placed to determine how many Hits are generated. A Template must be placed so that its narrow end is touching the Base of the Model, the edge of a Model’s Hull (if it has the Vehicle Type) or other point being used to make the attack, and so that no part of the Template covers or touches a friendly Model’s Base, Hull or otherwise would inflict Hits on a friendly Model. Within these restrictions, the Player making the attack may place the Template in an orientation of their choosing as long as at least one Model from the original Target Unit remains under the Template. If the Template cannot be placed under these restrictions, such as if it cannot be placed without covering or touching friendly Models, then no attack may be made.

Once the Template has been placed, a number of Hits using the profile of the Weapon or effect are inflicted on the Target Unit equal to the number of Models touched or covered by the Template. If the Weapon or attack has a Firepower Characteristic greater than 1 then only a single Template is placed, but the number of Hits inflicted per Model touched or covered by the Template is equal to the Firepower Characteristic of the attack or Weapon. If more than one enemy Unit has Models that are touched or covered by the Template in its final position, then Hits are inflicted on all such Units as noted above, Hits on Units other than the original target form a new Fire Group that must be placed to one side and used to resolve a separate Shooting Attack on the additional Target Unit once all attacks and Fire Groups from the original Shooting Attack have been fully resolved. When resolving Armour Penetration Tests for Hits inflicted by a Weapon with this Special Rule, the position of the Model that was used to make the attack is used to determine which Armour Facing is used.

Note that the Rules require a Template to be placed in Base Contact with the Model being used to make the attack, but this Model is not counted as having been Hit by the attack and does not stop the attack from being made. However, this only applies to the individual Model being used to make the attack, not to other Models in the same Unit.

Weapons with this Special Rule will have their Range Characteristic as Template’. This does not count as a value of ‘0’ or ‘-’. If a Rule requires a number for the Range Characteristic then all Weapons and attacks with this Special Rule are considered to have a Range Characteristic of ‘8’.

OTHER TEMPLATES
In some rare cases a Weapon may use a different Template than the standard Flame Template, in these cases the Template Rule may be expressed with a bracketed section stating which Template must be used when attacking with that Weapon. Otherwise, the Rules for its use are unchanged from those noted under the Template Special Rule, with the exception of the Range Characteristic it is considered to have.

An example of this is the use of the Hellstorm Template for certain very large Weapons. In this case the Rule would be expressed as ‘Template (Hellstorm)’ and the attack would be resolved using the Template Special Rule, but placing the larger Hellstorm Template. Weapons with the Template (Hellstorm) Special Rule are considered to have a Range Characteristic of ‘16’ when a Rule requires such weapons to have a numbered Range Characteristic.
Panic (X)

Some weapons are so terrifyingly potent that their use instils abject fear in even the most strong-willed warriors. In the face of such wanton power the target can only flee or prepare for death, for few would live to tell of the true horrors of the Age of Darkness once they were unleashed on the battlefield.

Weapons and other attacks that have the Panic (X) Special Rule have a chance of inflicting the Routed Status on the Target Unit.

If a Shooting Attack made for a Weapon or Model with this Special Rule inflicts one or more wounds on a Target Unit, regardless of whether any Damage is inflicted, that Target Unit must make a Leadership Check in the Morale Sub-Phase of the same Player Turn. If this Check is failed then all Models in the Unit gain the Routed Status, if the Check is passed then there is no further effect. The value of X attached to this Special Rule is applied as a negative modifier to the Leadership Characteristic of Models in the Target Unit when making Checks caused by an attack with this Special Rule. If the attack includes multiple Weapons with different versions of this Special Rule the modifiers do not stack - use only the greatest modifier.

Flamer

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Flamer
Flamer
Template
1
4
5
1
Template, Panic (1)
Flame

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Implacable Advance

The wargear of many Legiones Astartes warriors and war machines incorporates a variety of targeting and stabilisation systems, enabling larger weaponry to be brought to bear even at close ranges.

Models with this Special Rule can make Volley Attacks with other Weapons.

The Controlling Player of a Model with this Special Rule treats all Ranged Weapons such a Model has that do not have any variant of the Heavy (X) Special Rule or Ordnance (X) Special Rule as having the Assault Trait.
Explodes (X)

Volatile fuel, overpowered reactors or dangerous munitions can cause some war engines to explode when destroyed. Such explosions can prove devastating to friend and foe alike.

A Model with this Special Rule can explode and cause Hits to nearby Models and Units.

Before a Model with the Explodes (X) Special Rule is Removed as a Casualty, the Controlling Player must roll a Dice. If the result of that roll equals or exceeds the value of X attached to this variant of the Explodes (X) Special Rule, the Model explodes. Every Unit with one or more Models within 6" of an exploding Model suffers a number of Hits equal to the Base Wounds Characteristic or Base Hull Points Characteristic of the exploding Model. Each such Hit has a Strength of 8, an AP of ‘-’ and a Damage of 1. Once all Hits caused by this Special Rule have been resolved, the Model with the Explodes (X) Special Rule is Removed as a Casualty as normal.
Transport Capacity – This Characteristic is only used to determine how many Models may Embark upon a Model (see the Transport Rules). Most Models with the Vehicle Type will have a Transport Capacity of 0/-, which simply means that no Models may Embark upon that Model.
Bulky (X)

Transport vehicles are designed to balance armour and capacity, attempting to mount the most protection without compromising how many warriors they can carry. Yet, some warriors are plated in such imposing armour or even spawned in such an aberrant nature that they occupy far more space than any regular fighter. Such warriors are mighty in both power and stature, but prove more difficult to ferry into battle.

Models with the Bulky (X) Special Rule take up more space on Transport Models.

A Model with the Bulky (X) Special Rule does not use up 1 Point of Transport Capacity when it Embarks on a Model with the Transport Sub-Type. Instead it uses up a number of points of Transport Capacity equal to the value of X attached to the variant of the Bulky (X) possessed by that Model.
Automata

The steel warriors of the Mechanicum are unlike any other force in the galaxy, unflinching automatons of logic engrams and gears. Though far more rugged than even the Emperor’s Legiones Astartes, they are bound to the unchanging dictates of their programming and lack the tactical flexibility of flesh and blood warriors.

The following Rules apply to all Models with the Automata Type:
  • Models with the Automata Type cannot gain any Tactical Statuses and are considered to automatically pass any Check made to avoid gaining a Tactical Status. However, if a Unit that contains any Models with the Automata Type also includes any Models that do not have the Automata Type, that Check must be made using the Characteristics of one of the Models that does not have the Automata Type and is not automatically passed.
  • When targeting a Unit that includes any Models with the Automata Type, the effects of the Poisoned (X) Special Rule only trigger on a Wound Test with a result of a ‘6’ before modifiers are applied, regardless of the value of X for that variant of the Special Rule.
  • A Unit that includes one or more Models with the Automata Type may not make Reactions.
Phased Refractor Shields

Leveraging the powerful atomantic reactors of their combat automata, the Tech-priests of the Mechanicum calibrate the refractor fields protecting them to repulse enemy fire with greater efficiency. This has little effect on close range attacks, the frenzied strikes of melee, but allows bolt and blast to be repelled more effectively.

A Model with this Special Rule improves their Invulnerable Save against Shooting Attacks.

When the Controlling Player of a Model with this Special Rule chooses to make an Invulnerable Save for that Model against a wound generated by a Shooting Attack, that Invulnerable Save is improved by one step. For example, a Model with a 6+ Invulnerable Save Characteristic and this Special Rule that makes an Invulnerable saving throw against a wound inflicted by a Shooting Attack would have its Invulnerable Save Characteristic improved to a 5+ for that roll.

Bolter

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Bolter
Bolter
24
2
4
5
1
-
Bolt

The Cybernetica Trait is used in the following Forces of the Taghmata datasheets:

Firestorm

Many units within the Legion conduct warfare at pointblank distances, blasting their foes with a deluge of short ranged firepower.

A Model with this Special Rule does not have to make Volley Attacks as Snap Shots.

When a Model with this Special Rule makes Volley Attacks, it is not required to fire Snap Shots. In addition, after making Volley Attacks in Step 4 of the Charge Procedure, a Unit containing any Models with this Special Rule is not required to make a Charge Roll in Step 5. If the Controlling Player chooses not to make a Charge Roll in Step 5 of the Charge Procedure then the Charge Procedure ends immediately.

Shock chargers

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Shock chargers
Shock chargers
-1
A
+2
4
2
-
-

Mauler bolt cannon

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Mauler bolt cannon
Mauler bolt cannon
24
4
6
4
1
Pinning (0), Shred (5+)
Bolt

Pair of power blades

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Pair of power blades
Pair of power blades
I
A
S
3
1
Breaching (5+), Shred (5+)
Power

This datasheet has Support Battlefield Role. Full list of Forces of the Taghmata units sharing same Battlefield Role follows:

© Vyacheslav Maltsev 2013-2026