Khazalite Holds – Valayan Guardians with Runic Halberds

This warscroll does not meet the selection criteria (see Settings tab).
•KHAZALITE HOLDS WARSCROLL•
Valayan Guardians with Runic Halberds
4"
1
4+
1
4+
Protectors of hearth and hold, the Valayan Guardians are amongst the finest and bravest warriors of the karak. Clad in gromril armour, they can withstand attacks that would fell other duardin, and their devotion to their goddess only enhances their fortitude in battle. When wielding runic halberds, these warrior maidens are able to shear through heavy armour or take down any monstrous foe that threatens them or their kin.
•KHAZALITE HOLDS WARSCROLL•
Valayan Guardians with Runic Halberds
Damage calculator
MELEE WEAPONS
AtkHitWndRndDmg
Valayan Runic Halberd [Crit (2 Hits)]
Valayan Runic Halberd
Crit (2 Hits)
23+4+22
BATTLE PROFILE

Unit Size: 5      Points: 110
Base size: 28.5mm
Can be reinforced: Yes

Once Per Turn (Army), Your Charge Phase
WARRIORS OF THE HEARTH: As they charge into battle, these Valayan warriors use their halberds to carve a path through the enemy.

Declare: If this unit is not in combat and has not used a RUN or RETREAT ability this turn, make a charge roll of 2D6. While this unit has any grudge marks, you can re-roll that charge roll.

Effect: This unit can move a distance up to the value of the charge roll. It can move through the combat ranges of enemy units, pass across enemy models and must end that move within ½" of a visible enemy unit. If it does so, it has charged. Then, if this unit charged this turn, pick an enemy unit it passed across this turn. Inflict D3 mortal damage on that enemy unit.
KEYWORDSCORE, MOVE, CHARGE

KEYWORDS
INFANTRY, CHAMPION, WARD (4+)
ORDER, KHAZALITE HOLDS, DUARDIN, KROMDRON, VALAYAN
Hit Roll
Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.

Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities).
Cover
Subtract 1 from hit rolls for attacks that target a unit that is behind or wholly on this terrain feature, unless that unit charged this turn or has the FLY keyword.
17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
Your Movement Phase
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.

Declare: Pick a friendly unit that is in combat to use this ability.

Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
KEYWORDSCORE, MOVE, RETREAT
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’

  • A unit’s combat range extends 3" out from every model in that unit.
  • If any enemy models are within a unit’s combat range and visible to it, that unit is in combat.

FAQ / Errata

FAQ
Q:If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model?
A:
No.
Errata
Addenda: 7.0 Combat Range
Add the following:

‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
Passive
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.

Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
Obscuring
While every model in a non-MONSTER non‐WAR MACHINE unit that does not have the FLY keyword is within 1" of this terrain feature, the following apply:
  • That unit is only visible to enemy units that are within its combat range.
  • The Range characteristic of that unit’s ranged weapons is halved (rounding down to the nearest inch).
Unstable
Models can move across but cannot be set up on or end any type of move on any part of this terrain feature that is more than 1" tall.
1.4.2 Obscuring Terrain
Examples: Wyldwood, fortress wall
Terrain Abilities: Cover, Obscuring, Unstable
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.
If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
  • If any part of another model can be seen by an observing model, both the target model and its unit are visible to that observing model.

In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes.

FAQ / Errata

FAQ
Q:If a non-FLY INFANTRY HERO (e.g. a Scinari Cathallar) is a Shrine Guardian of a Shrine Luminor, and that Shrine Guardian is within 1" of an obscuring terrain feature, is the Shrine Guardian visible to enemy abilities that target the Shrine Guardian?
A:
Yes.
Errata
6.0 Visibility
Add the following:

‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
Universal Core Abilities - Charge Phase
Your Charge Phase
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
KEYWORDSCORE, MOVE, CHARGE

18.1 Ward Saves
Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect.

Passive
WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.

Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.

Companion
Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).
Your Charge Phase
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
KEYWORDSCORE, MOVE, CHARGE
14.3 Charge Phase
Your Charge Phase
CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.
KEYWORDSCORE, MOVE, CHARGE

FAQ

Q:When using the ‘Charge’ ability, does my unit need to end the charge move within 1⁄2" of an enemy unit that was visible to the charging unit at the start of that charge move?
A:
No. It must end the charge move within 1⁄2" of an enemy unit that is visible to the charging unit when it finishes that charge move.
Q:If an ability adds to or subtracts from the number of dice that make up a charge roll, is that a modifier to the charge roll?
A:
No.
Crit (2 Hits)
If an attack made with this weapon scores a critical hit, that attack scores 2 hits on the target unit instead of 1. Make a wound roll for each hit.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
1.0 Champions
Units with the CHAMPION keyword have one or more champion models. If there is a number after the CHAMPION keyword, that number indicates the proportion of models in that unit that can be champions. In any other case, 1 model in the unit can be a champion. Units with the CHAMPION keyword have the following passive ability:

Passive
CHAMPION: A veteran fighter leads the charge.

Effect: Add 1 to the Attacks characteristic of weapons used by champions in this unit. If this unit is a BEAST, this ability affects this unit’s Companion weapons.

Errata

Champion
Change the definition of Champion to:
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’

The KROMDRON keyword is used in the following Khazalite Holds warscrolls:

Infantry Hero
• Thrynn
War Machine Hero

The VALAYAN keyword is used in the following Khazalite Holds warscrolls:

War Machine
© Vyacheslav Maltsev 2013-2026