Datasheets
Army List
 
 
About
 
Settings
The Rules
Core RulesPrinciples of CombatThe Rules of BattleBattles in the Age of DarknessArmoury of the Age of DarknessFAQ
Factions

Skitarii Conclaves – Skitarii Battle-Pilgrym Corpus

This datasheet does not meet the selection criteria (see Settings tab).
Skitarii Battle-Pilgrym Corpus
UNIT COMPOSITION: 1 SKITARII ORDINATOR, 7 SKITARII BATTLE-PILGRYMS
100 PointsPts
May include up to 8 additional Skitarii Battle-Pilgryms at +10 Points per Model.

The bulk of the nomadic contingents of the Skitarii Battle-Pilgryms are bound together as conclaves and each of these war formations is each led by an ordinator, an individual through which the will of the marshal is conducted. Attuned to an unnaturally long existence of unceasing pilgrimage and war, the Skitarii care little for the comforts of civil life nor do they possess aspiration to ascend through ranks or hierarchy. Instead, they are singularly focused on the defence of the domains of the Omnissiah and the acquisition of lost technology, to prevent it from falling into the hands of the unworthy.

LD CL WP IN
M WS BS S T W I A LD CL WP IN SAV INV
Ordinator (⌀28mm) 8 8 8 7
Ordinator (⌀28mm) 6 4 3 3 4 2 3 3 8 8 8 7 4+ 6+
Battle-Pilgrym (⌀28mm) 7 8 8 7
Battle-Pilgrym (⌀28mm) 6 3 3 3 4 2 3 2 7 8 8 7 4+ 6+
WARGEAR
  • Voltlock arquebus
  • Frag grenades
  • Krak grenades
TRAITS
  • [Allegiance]
  • [Skitarii]
SPECIAL RULES
  • Fast (2)
TYPE
  • Ordinator: Infantry (Sergeant)
  • Battle-Pilgrym: Infantry
OPTIONS
  • The Skitarii Ordinator in this Unit may have its voltlock arquebus exchanged for one voltlock handgun and one power sword for Free.
  • Any Model in this Unit may have rad charges selected for it for +2 Points per Model.
  • Any Model in this Unit may have haywire grenades selected for it for +2 Points per Model.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.

For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.

In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.

While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Deflagrate (X)

Exotic beam weapons of arcing energy or sequential explosions triggered by the death of the first victim, some weapons cause not a single casualty, but a slew of them. Such weapons are wielded with grim efficiency against close packed formations of troops on the battlefields of the Horus Heresy. The most well-known examples are the volkite weapons of Mars, but many others are known.

Unsaved Wounds inflicted by attacks with the Deflagrate (X) Special Rule can cause additional Hits.

At the end of Step 9 of the Shooting Attack process for any Fire Group or Strike Group that includes Weapons with the Deflagrate (X) Special Rule, create a new Fire Group or Strike Group that must then be selected in Step 10 and resolved. This new Fire Group or Strike Group includes a number of Hits equal to the number of Unsaved Wounds caused by the Fire Group or Strike Group that triggered its creation. These Hits all have a Strength equal to the value of X attached to the variant of the Deflagrate (X) Special Rule possessed by Weapons in the preceding Fire Group or Strike Group, an AP of ‘-’, a Damage of 1 and no Special Rules.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.

In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
  1. Select Target Unit.
  2. Check Target.
  3. Declare Weapons.
  4. Set Fire Groups.
  5. Select Fire Group To Resolve.
  6. Make Hit Tests.
  7. Make Wound Tests.
  8. Select Target Model.
  9. Make Saving Throws & Damage Mitigation Tests.
  10. Select Next Fire Group.
  11. Remove Casualties.
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)

Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.

Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.

When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.

Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.

If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.

Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.

If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.

The [Allegiance] Trait is used in the following Skitarii Conclaves datasheets:

Command
Troops
Support
Heavy Transport
Fast Attack
Armour

The [Skitarii] Trait is used in the following Skitarii Conclaves datasheets:

Command
Troops
Support
Heavy Transport
Fast Attack
Armour
Infantry

Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.

Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.
Fast (X)

Fleet of foot, genetically enhanced or technologically boosted, some warriors are simply faster than their peers. Such warriors can swiftly reach the most advantageous positions on the battlefield and carry the fight to the foe before they can react.

A Unit that only includes Models with the Fast (X) Special Rule gains a bonus to Rush and Charge Moves.

When the Player controlling a Unit that is composed entirely of Models with the Fast (X) Special Rule elects to have that Unit Rush, add the value of X attached to the specific variant of Fast (X) to the distance the Unit can move. Likewise, when a Unit composed entirely of Models with the Fast (X) Special Rule is required to make a Charge Move, add the value of X attached to the specific variant of the Fast (X) Special Rule as a positive modifier to the Charge Roll. In any situation where a Unit includes Models with two or more variants of the Fast (X) Special Rule, the lowest possible modifier is used.
Army List
Faction Rules
• The Skitarii Conclaves Army List

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get new pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!

This datasheet has Troops Battlefield Role. Full list of Skitarii Conclaves units sharing same Battlefield Role follows:

Impact (X)

Some warriors are trained or equipped to make the most of the force of a charge. When they slam into enemy ranks, it is with the force of a thunderbolt.

On a successful Charge, a Model with the Impact (X) Special Rule temporarily increases a Characteristic by 1.

If a Unit that includes any Models with the Impact (X) Special Rule or any Models that have any Weapons with the Impact (X) Special Rule, and that Unit makes a successful Charge, then this Special Rule is triggered. Once triggered, until the end of that Assault Phase, when making Melee Attacks for Models in that Unit, each Model or Weapon that is selected for one of those Models, that has a variant of this Special Rule gains a modifier of +1 to any Characteristics that is the value of X.

Voltlock arquebus

This Weapon has both a Ranged and Melee Profile.
Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Voltlock arquebus (Ranged)
Voltlock arquebus (Ranged)
20
2
5
5
1
Deflagrate (5)
Volkite

Melee Weapon
Melee Weapon
IM
AM
SM
AP
D
Special Rules
Traits
Voltlock arquebus (Melee)
Voltlock arquebus (Melee)
I
A
+1
4
1
Impact (I)
-
Frag Grenades

This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.

Frag grenades can be used to make attacks during the Volley Step.

When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:

Ranged Weapon
Ranged Weapon
R
FP
RS
AP
D
Special Rules
Traits
Frag Grenades
Frag Grenades
6
1
3
6
1
Blast (3")
Assault
Sergeant

The humble sergeant stands as one of the greatest weapons in the arsenals of any army. Skilled in war and in leadership, each sergeant is the beating heart of their unit and the cornerstone upon which victory is built.

The following Rules apply to all Models with the Sergeant Sub-Type:
  • The Controlling Player of a Unit that includes one or more Models with the Sergeant Sub-Type may use the Characteristics of one of those Models to resolve any Characteristic Check made for that Unit.
© Vyacheslav Maltsev 2013-2026