Space Marines – Wulfen Dreadnought
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
7

Wulfen Dreadnought

NoNAME  M WS BS S T W A Ld Sv Base
120
Wulfen Dreadnought (base: 60mm)
1
120
Wulfen Dreadnought
8" 3+ 5+ 6 7 8 4 7 3+ 60mm
A Wulfen Dreadnought is a single model equipped with: Fenrisian great axe; great wolf claw; storm bolter.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
+5
Heavy flamer
+5
Heavy flamer
12"
Heavy D6
5
-1
1
Each time an attack is made with this weapon, that attack automatically hits the target.
Each time an attack is made with this weapon, that attack automatically hits the target.
Storm bolter
Storm bolter
24"
Rapid Fire 2
4
0
1
-
Fenrisian great axe
Each time an attack is made with this weapon, select one of the profiles below to make that attack with.
Fenrisian great axe
Each time an attack is made with this weapon, select one of the profiles below to make that attack with.
 - Cleave
 - Cleave
Melee
Melee
+4
-3
D3+3
Each time an attack is made with this weapon profile, subtract 1 from that attack’s hit roll.
Each time an attack is made with this weapon profile, subtract 1 from that attack’s hit roll.
 - Scythe
 - Scythe
Melee
Melee
User
-3
1
Each time an attack is made with this weapon profile, make 2 hit rolls instead of 1.
Each time an attack is made with this weapon profile, make 2 hit rolls instead of 1.
Great wolf claw
Great wolf claw
Melee
Melee
+4
-2
3
Each time an attack is made with this weapon, you can re-roll the wound roll.
Each time an attack is made with this weapon, you can re-roll the wound roll.
OTHER WARGEAR
ABILITIES 
+5
Blizzard shield
The bearer has a 4+ invulnerable save.
+5
Blizzard shield
The bearer has a 4+ invulnerable save.
WARGEAR OPTIONS
WARGEAR OPTIONS
 • This model’s Fenrisian great axe or great wolf claw and storm bolter can be replaced with 1 blizzard shield and 1 storm bolter.
 • Any of this model’s storm bolters can each be replaced with a heavy flamer.
ABILITIES
ABILITIES
Angels of Death
Murderlust: You can re-roll charge rolls made for this unit.
Duty Eternal: Each time an attack is allocated to this model, subtract 1 from the Damage characteristic of that attack (to a minimum of 1).
Bestial Rage: This unit cannot perform any actions.
Explodes: When this model is destroyed, roll one D6 before removing it from play. On a 6 it explodes, and each unit within 3" suffers 1 mortal wound.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, SPACE WOLVES
KEYWORDS: VEHICLE, DREADNOUGHT, WULFEN

Datasheet-related Stratagems

ARMOUR OF CONTEMPT1CP
Adeptus Astartes – Epic Deed Stratagem

The belligerency of some Adeptus Astartes machine spirits makes them unyielding foes to face.

Use this Stratagem in any phase, when an ADEPTUS ASTARTES VEHICLE model from your army would lose a wound as the result of a mortal wound. Until the end of the phase, each time that model would lose a wound as the result of a mortal wound, roll one D6: on a 5+, that wound is not lost.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Army List
Datasheets collated
Faction Rules
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.

Storm bolter used in the following datasheets:


– may take Storm bolter as an option.

The WULFEN keyword is used in the following Space Marines datasheets:

Fenrisian great axe used in the following datasheets:

Great wolf claw used in the following datasheets:

Blizzard shield used in the following datasheets:

© Vyacheslav Maltsev 2013-2021