Space Marines – Tor Garadon
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
8

Tor Garadon

NoNAME  M WS BS S T W A Ld Sv Base
145
Tor Garadon (base: 40mm)
1
145
Tor Garadon
5" 2+ 2+ 4 5 7 5 9 3+ 40mm
Tor Garadon is a single model equipped with: grav-gun; Hand of Defiance. You can only include one of this model in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Grav-gun
Grav-gun
18"
Rapid Fire 1
5
-3
1
Each time an attack made with this weapon is allocated to a model with a Save characteristic of 3+ or better, that attack has a Damage characteristic of 2.
Each time an attack made with this weapon is allocated to a model with a Save characteristic of 3+ or better, that attack has a Damage characteristic of 2.
Hand of Defiance
Hand of Defiance
Melee
Melee
x3
-3
3
When resolving an attack made with this weapon, subtract 1 from the hit roll.
When resolving an attack made with this weapon, subtract 1 from the hit roll.
ABILITIES
ABILITIES
Angels of Death
Iron Halo: This model has a 4+ invulnerable save.
Rites of Battle (Aura): While a friendly IMPERIAL FISTS CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1.
Signum Array: In your Command phase, select one friendly IMPERIAL FISTS unit within 3" of this model. Until the start of your next Command phase, each time a model in that unit makes a ranged attack, add 1 to that attack’s hit roll.
Siege Captain: When resolving an attack made by this model against a VEHICLE or BUILDING unit, add 1 to the Damage characteristic of the weapon being used for that attack.
WARLORD TRAIT!
WARLORD TRAIT!
Siege Master: When resolving an attack made by this WARLORD against a BUILDING or VEHICLE unit, add 1 to the wound roll.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, IMPERIAL FISTS
KEYWORDS: CHARACTER, INFANTRY, MK X GRAVIS, PRIMARIS, CAPTAIN, TOR GARADON

Datasheet-related Stratagems

THE SHIELD UNWAVERING2CP
Imperial Fists – Battle Tactic Stratagem

Once the Imperial Fists have captured a site of strategic importance, they dig in and hold their position no matter what the enemy hurls at them.

Use this Stratagem at the end of your Morale phase. Select one IMPERIAL FISTS INFANTRY unit from your army that is within 3" of any objective markers. Until the start of your next turn, add 1 to the Attacks characteristic of models in that unit, and when resolving an attack made against that unit, add 1 to the saving throw (excluding invulnerable saves).
TRANSHUMAN PHYSIOLOGY1CP/2CP
Adeptus Astartes – Battle Tactic Stratagem

Space Marines can fight through even the most grievous of wounds.

Use this Stratagem in any phase, when a PRIMARIS unit from your army is selected as the target of an attack. Until the end of the phase, each time an attack is made against that unit, an unmodified wound roll of 1-3 for that attack fails, irrespective of any abilities that the weapon or the model making the attack may have. If that unit contains 5 or fewer models, this Stratagem costs 1CP; otherwise, it costs 2CP.
GENE-WROUGHT MIGHT1CP
Adeptus Astartes – Battle Tactic Stratagem

Blessed with incredible strength, Primaris Space Marines deliver blows that inflict terrifying damage.

Use this Stratagem in the Fight phase, when a PRIMARIS unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes a melee attack, an unmodified hit roll of 6 automatically wounds the target.
UNYIELDING IN THE FACE OF THE FOE1CP
Adeptus Astartes – Battle Tactic Stratagem

Those clad in Gravis armour are walking ceramite strongpoints.

Use this Stratagem in any phase, when a MK X GRAVIS unit from your army selected as the target of an attack. Until the end of the phase, each time an attack with a Damage characteristic of 1 is allocated to a model in that unit, add 1 to any armour saving throw made against that attack.
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
PAIN IS A LESSON1CP
Imperial Fists – Strategic Ploy Stratagem

To the Imperial Fists, pain is but another didactic tool, a reminder of what their forebears endured without complaint and which they, too, must weather unwavering.

Use this Stratagem in any phase, when an IMPERIAL FISTS unit from your army that is not a VEHICLE or SERVITOR is chosen as the target of an enemy attack. Until the end of that phase, when a model in that unit would lose a wound, roll one D6; on a 6 that wound is not lost.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem

Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.

Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem

A measured advance allows Space Marines to unleash a steady stream of fire.

Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem

Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.

Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

Grav-gun used in the following datasheets:

Heavy Support

– may take Grav-gun as an option.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.

  • Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021