Space Marines – Pellas Mir’san
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
100 Pellas Mir’san (base: ?) |
|||||||||||
| 1 | 100 Pellas Mir’san |
6" | 2+ | 2+ | 4 | 4 | 6 | 4 | 9 | 2+ | ? |
Pellas Mir’san is equipped with: combi-flamer; Cinder Edge; Steelsliver; frag grenades; krak grenades. Your army can only include one PELLAS MIR’SAN model.
* This datasheet is part of the Warhammer Legends range of rules and can be used in any type of play - open, narrative or matched. However Legends units are not updated by GW and not supported by Wahapedia and therefore not recommended for competitive tournaments.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
Combi-flamer | ||||||
Before selecting targets, select one or both of the profiles below to make attacks with. If you select both, then each time an attack is made with this weapon this phase, subtract 1 from that attack’s hit roll. | ||||||
Combi-flamer | Before selecting targets, select one or both of the profiles below to make attacks with. If you select both, then each time an attack is made with this weapon this phase, subtract 1 from that attack’s hit roll. | |||||
| - Boltgun | ||||||
| - Boltgun | 24" | Rapid Fire 1 | 4 | 0 | 1 | - |
| - Flamer | ||||||
| - Flamer | 12" | Assault D6 | 4 | 0 | 1 | Each time an attack is made with this weapon profile, that attack automatically hits the target. |
| Each time an attack is made with this weapon profile, that attack automatically hits the target. | ||||||
| Cinder Edge | ||||||
| Cinder Edge | Melee | Melee | +1 | -3 | 3 | - |
| Steelsliver | ||||||
| Steelsliver | Melee | Melee | User | 0 | 1 | Each time the bearer is selected to fight, it makes a number of additional attacks with this weapon equal to the number of enemy models within Engagement Range of it. |
| Each time the bearer is selected to fight, it makes a number of additional attacks with this weapon equal to the number of enemy models within Engagement Range of it. | ||||||
| Frag grenades | ||||||
| Frag grenades | 6" | Grenade D6 | 3 | 0 | 1 | Blast |
| Blast | ||||||
| Krak grenades | ||||||
| Krak grenades | 6" | Grenade 1 | 6 | -1 | D3 | - |
ABILITIES | |
ABILITIES |
Angels of Death Iron Halo: This model has a 4+ invulnerable save. Rites of Battle (Aura): While a friendly CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1. Master Duellist: At the start of the Fight phase, if this model is within Engagement Range of any enemy CHARACTER units, until the end of the phase, add 2 to this model’s Attacks characteristic. |
WARLORD TRAIT! | |
WARLORD TRAIT! |
Inspiring Leader (Aura): Add 1 to the Leadership characteristic of friendly units while they are within 6" of this WARLORD. |
| FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, SALAMANDERS | |
| KEYWORDS: INFANTRY, CHARACTER, CAPTAIN, PELLAS MIR’SAN | |
Datasheet-related Stratagems
FLAMECRAFT2CP
Salamanders – Battle Tactic Stratagem
No warriors can coax the searing spirits of flamers to brighter or more destructive life than those from volcanic Nocturne.
Use this Stratagem in your Shooting phase, when a SALAMANDERS unit from your army is chosen to shoot with. Until the end of that phase, when a model in that unit shoots with a flame weapon, do not roll to determine the number of attacks made with that weapon; instead, the maximum number of attacks are made with that weapon (e.g. 6 attacks are made with a Heavy D6 weapon).
THE CRUCIBLE OF BATTLE1CP
Salamanders – Battle Tactic Stratagem
Only where the battle is fiercest and the enemy can be faced eye to eye can the Salamanders truly be tested.
Use this Stratagem in the Shooting or Fight phase, when a SALAMANDERS CORE or SALAMANDERS CHARACTER unit from your army is chosen to shoot or fight with. Until the end of that phase, when resolving an attack made by a model in that unit, add 1 to the wound roll.
STRENGTH OF THE PRIMARCH1CP
Salamanders – Battle Tactic Stratagem
When facing the largest enemies, Vulkan’s sons draw upon their gene-sire’s titanic might, their strength terrible to behold.
Use this Stratagem at the start of the Fight phase. Select one SALAMANDERS unit from your army. Until the end of that phase, add 1 to the Strength characteristic of models in that unit, and when resolving an attack made with a melee weapon by a model in that unit, on an unmodified wound roll of 6 double the Damage characteristic of that weapon for that attack.
STAND YOUR GROUND1CP
Salamanders – Battle Tactic Stratagem
Such is their famed endurance that the Salamanders are able to stand firm amidst storms of small-arms fire and lesser blows.
Use this Stratagem in any phase, when a SALAMANDERS INFANTRY unit from your army that is not a SERVITOR and did not Advance in this phase or your previous Movement phase is chosen as the target for an attack. Until the end of that phase, when resolving an attack made with a weapon that has a Damage characteristic of 1 against a model in that unit, add 1 to the saving throw. This does not affect invulnerable saving throws.
RISE FROM THE ASHES2CP
Salamanders – Epic Deed Stratagem
The sons of Vulkan have always evinced a tenacious hold upon life while their enemies yet live.
Use this Stratagem in any phase, when a SALAMANDERS CHARACTER model from your army is destroyed. At the end of that phase, roll one D6; on a 4+ return that model to play with 1 wound remaining, placing it as close as possible to its previous position and more than 1" away from any enemy models. This Stratagem cannot be used on the same model more than once per battle.
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem
Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.
Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
THE FIRES OF BATTLE1CP
Salamanders – Strategic Ploy Stratagem
The Salamanders’ expertise with weapons that recall their volcanic heritage is unmatched.
Use this Stratagem in your Shooting phase or in your opponent’s Charge phase, when a SALAMANDERS model from your army shoots with a flame weapon or melta weapon. Until the end of that phase, when resolving an attack made with that weapon, on an unmodified wound roll of 4+ the target suffers 1 mortal wound in addition to any normal damage (a maximum of 3 mortal wounds can be inflicted per phase via this Stratagem).
IMMOLATION PROTOCOLS1CP
Salamanders – Strategic Ploy Stratagem
Even in the press and whirl of close combat, the fires of Nocturne are undimmed, a roaring inferno consuming the foe.
Use this Stratagem in your Shooting phase, when a SALAMANDERS unit from your army is chosen to shoot with. Until the end of that phase, change the type of all flame weapons models in that unit are equipped with to Pistol (e.g. an Assault D6 flame weapon becomes Pistol D6).
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem
Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.
Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem
A measured advance allows Space Marines to unleash a steady stream of fire.
Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem
Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.
Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.
This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:
HQ
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.
- Double number of attacks made if target is within half range.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Frag grenades used in the following datasheets:
Elites
Troops
Fast Attack
HQ
and others...
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:- If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
- When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
- Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
- Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.
- Only one model can use a Grenade when its unit shoots.
Krak grenades used in the following datasheets:
Elites
Troops
Fast Attack
HQ
and others...
And They Shall Know No Fear
Space Marines stand unafraid before the terrors of the galaxy.
Each time a Combat Attrition test is taken for this unit, ignore any or all modifiers.The INFANTRY keyword is used in the following Space Marines datasheets:
HQ
and others...
The CENTURION keyword is used in the following Space Marines datasheets:
Elites
Heavy Support
The TERMINATOR keyword is used in the following Space Marines datasheets:
HQ
Elites
Heavy Support
– while a PROTEUS KILL TEAM unit only contains Deathwatch Terminators, it has the TERMINATOR keyword.The BIKER keyword is used in the following Space Marines datasheets:
HQ
Elites
– while a FORTIS KILL TEAM unit only contains Outriders, it has the BIKER keyword and loses the INFANTRY keyword.Bolter Discipline
To a Space Marine, the boltgun is more than a weapon - it is an instrument of Mankind’s divinity, the bringer of death to his foes.
Instead of following the normal rules for Rapid Fire weapons, models in this unit shooting Rapid Fire bolt weapons make double the number of attacks if any of the following apply:- The shooting model’s target is within half the weapon’s range.
- The shooting model is INFANTRY (excluding CENTURION models) and its unit Remained Stationary in your previous Movement phase.
- The shooting model is a TERMINATOR or BIKER.
Shock Assault
The Adeptus Astartes are elite troops who strike with the fury of a thunderbolt. Few opponents can withstand this onslaught.
Each time this unit fights, if it made a charge move, was charged, or performed a Heroic Intervention this turn, then until that fight is resolved, add 1 to the Attacks characteristic of models in this unit.The ADEPTUS ASTARTES keyword is used in the following Space Marines datasheets:
HQ
and others...
The datasheets using AGENT OF THE IMPERIUM keyword can be found in the following Factions:
Imperium: Adepta Sororitas, Agents of the Imperium, Imperial Knights, Inquisition.The AGENT OF THE IMPERIUM keyword is used in the following datasheets:
HQ
Lords of War
The datasheets using UNALIGNED keyword can be found in the following Factions:
Unaligned: Unaligned.Imperium: Astra Militarum, Space Marines.
The UNALIGNED keyword is used in the following datasheets:
Troops
Fortifications
Combat Doctrines
When the Adeptus Astartes fight, they employ a set of combat doctrines to eliminate the enemy. After pounding the foe with heavy weapons, warriors advance to lay down a hail of bolter fire before charging forth with chainswords roaring to finish the foe.
If every unit from your army has the ADEPTUS ASTARTES keyword (excluding AGENT OF THE IMPERIUM and UNALIGNED units), this unit gains a bonus (see below) depending on which Combat Doctrine is active for your army. During the first battle round, the Devastator Doctrine is active for your army. From the second battle round onwards, at the start of the battle round, you can change which Combat Doctrine is active for your army, as follows:- If the Devastator Doctrine was active for your army during the previous battle round, you can change it so that the Tactical Doctrine is now active.
- If the Tactical Doctrine was active for your army during the previous battle round, you can change it so that the Assault Doctrine is now active.
Devastator Doctrine
The Codex Astartes explains in detail the strategic value of overwhelming firepower applied to key targets at the optimal time in order to eliminate threats and create tactical openings.
While this combat doctrine is active, improve the Armour Penetration characteristic of every Heavy and Grenade weapon that models in this unit are equipped with by 1.Tactical Doctrine
As the warring armies close upon one another and vicious firefights erupt, the Codex lays out strategies for swiftly seizing the initiative and combining versatility with firepower.
While this combat doctrine is active, improve the Armour Penetration characteristic of every Rapid Fire and Assault weapon that models in this unit are equipped with by 1.Assault Doctrine
The Codex Astartes leaves no doubt that the killing blow in most engagements must be delivered with a decisive close-quarters strike. It presents plentiful tactical means to achieve this end.
While this combat doctrine is active, improve the Armour Penetration characteristic of every Pistol and Melee weapon that models in this unit are equipped with by 1.Angels of Death
Space Marines are amongst the finest warriors in the Imperium.
This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.- Advance: Models move up to M+D6".
- Cannot move within Engagement Range of enemy models.
- Units that Advance cannot shoot or charge this turn.
The IMPERIUM keyword is used in the following Space Marines datasheets:
HQ
and others...
The ADEPTUS ASTARTES keyword is used in the following Space Marines datasheets:
HQ
and others...
The CHARACTER keyword is used in the following Space Marines datasheets:
HQ
and others...
The CAPTAIN keyword is used in the following Space Marines datasheets:
HQ
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
The ADEPTUS ASTARTES and CHARACTER keywords are used in the following Space Marines datasheets:
HQ
and others...
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).Note that CHARACTERS cannot use their Aura Abilities while performing actions.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).
- Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.
- Can be shot even if firing model’s unit Advanced.
- Subtract 1 from hit rolls if the firing model’s unit Advanced.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).
- Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Army List
Datasheets collatedHQ
Dedicated Transport
Elites
Fast Attack
Flyers
Heavy Support
Lords of War
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.
When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.
- Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
- Cannot be shot alongside any other type of weapon.
The INFANTRY keyword is used in the following Space Marines datasheets:
HQ
and others...
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:
| ||||||||||||||
If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The ADEPTUS ASTARTES and INFANTRY keywords are used in the following Space Marines datasheets:
HQ
and others...
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.- Remain Stationary: Models cannot move this phase.
The SALAMANDERS and CORE keywords are used in the following Space Marines datasheets:
Troops
Elites
Fast Attack
The SALAMANDERS keyword is used in the following Space Marines datasheets:
HQ
Troops
Dedicated Transport
Elites
and others...
Number of Attacks (shooting)
When a model shoots a ranged weapon, it will make a number of attacks. You make one hit roll for each attack being made.The number of attacks that a model makes with a ranged weapon is equal to the number written on that weapon’s profile after its type. For example, a model shooting an ‘Assault 1’ weapon can make one attack with that weapon; a model firing a ‘Heavy 3’ weapon can make three attacks, and so on.
- All of a ranged weapon’s attacks must be made against the same target unit.
- Number of attacks = number after weapon’s type.
The SALAMANDERS and CHARACTER keywords are used in the following Space Marines datasheets:
HQ
Elites
Heavy Support
The SALAMANDERS and INFANTRY keywords are used in the following Space Marines datasheets:
HQ
Troops
Elites
The SERVITOR keyword is used in the following Space Marines datasheets:
Elites
Combi-flamer used in the following datasheets:
HQ
Elites
– may take Combi-flamer as an option.The PELLAS MIR’SAN keyword is used in the following Space Marines datasheets:
