Space Marines – Lord High Commander Carab Culln
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
170 Lord High Commander Carab Culln (base: 40mm) | |||||||||||
| 1 | 170 Lord High Commander Carab Culln | 5" | 2+ | 2+ | 4 | 4 | 7 | 6 | 9 | 2+ | 40mm |
Lord High Commander Carab Culln is equipped with: Judgement; Blade of the Scorpion. Your army can only include one CARAB CULLN model.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Judgement | ||||||
| Judgement | 24" | Rapid Fire 2 | 4 | -2 | 2 | This weapon is a bolt weapon. |
| This weapon is a bolt weapon. | ||||||
| Blade of the Scorpion | ||||||
| Blade of the Scorpion | Melee | Melee | +2 | -3 | 2 | Each time an attack is made with this weapon against a MONSTER or VEHICLE unit, that attack has a Strength characteristic of x2. |
| Each time an attack is made with this weapon against a MONSTER or VEHICLE unit, that attack has a Strength characteristic of x2. | ||||||
ABILITIES | |
ABILITIES | Angels of Death, Teleport Strike Iron Halo: This model has a 4+ invulnerable save. Rites of Battle (Aura): While a friendly CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1. Chapter Master: In your Command phase, select one friendly CORE or CHARACTER unit within 6" of this model. Until the start of your next Command phase, each time a model in that unit makes an attack, you can re-roll the hit roll. Proud to Live, Proud to Die, Hard to Kill (Aura): While a friendly RED SCORPIONS unit is within 6" of this model, each time a model in that unit would lose a wound, roll one D6: on a 6, that wound is not lost. |
WARLORD TRAIT! | |
WARLORD TRAIT! | Inspiring Leader (Aura): Add 1 to the Leadership characteristic of friendly units while they are within 6" of this WARLORD. |
| FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, RED SCORPIONS | |
| KEYWORDS: INFANTRY, CHARACTER, TERMINATOR, CHAPTER MASTER, CARAB CULLN, LORD HIGH COMMANDER CARAB CULLN | |
Datasheet-related Stratagems
FURY OF THE FIRST1CP
Adeptus Astartes – Battle Tactic Stratagem
When the fighting is at its fiercest, the Terminator-armoured warriors of the Chapter truly show their quality.
Use this Stratagem in your Shooting phase, when an ADEPTUS ASTARTES unit from your army is selected to shoot, or in the Fight phase, when an ADEPTUS ASTARTES unit from your army is selected to fight. Until the end of the phase, each time a TERMINATOR model in that unit makes an attack, add 1 to that attacks hit roll.
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem
Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.
Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem
Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.
Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem
A measured advance allows Space Marines to unleash a steady stream of fire.
Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem
Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.
Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.
This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:
HQ
The LORD HIGH COMMANDER CARAB CULLN keyword is used in the following Space Marines datasheets:
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.
- Double number of attacks made if target is within half range.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Angels of Death
Space Marines are amongst the finest warriors in the Imperium.
This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.Teleport Strike
Space Marine strike cruisers and battle barges contain baroque chambers fitted with ancient technologies that can teleport the Angels of Death into the very heart of battle.
During deployment, if every model in this unit has this ability, then you can set up this unit in a teleportarium chamber instead of setting it up on the battlefield. If you do, then in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models.Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The and CHARACTER keywords are used in the following Space Marines datasheets:
HQ
and others...
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.The IMPERIUM keyword is used in the following Space Marines datasheets:
HQ
and others...
The ADEPTUS ASTARTES keyword is used in the following Space Marines datasheets:
HQ
and others...
The RED SCORPIONS keyword is used in the following Space Marines datasheets:
HQ
Troops
Dedicated Transport
Elites
and others...
The INFANTRY keyword is used in the following Space Marines datasheets:
HQ
and others...
The CHARACTER keyword is used in the following Space Marines datasheets:
HQ
and others...
The TERMINATOR keyword is used in the following Space Marines datasheets:
HQ
Elites
Heavy Support
The CHAPTER MASTER keyword is used in the following Space Marines datasheets:
HQ
The CARAB CULLN keyword is used in the following Space Marines datasheets:
The ADEPTUS ASTARTES and CHARACTER keywords are used in the following Space Marines datasheets:
HQ
and others...
The ADEPTUS ASTARTES and INFANTRY keywords are used in the following Space Marines datasheets:
HQ
and others...
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.- Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collatedHQ
Dedicated Transport
Elites
Fast Attack
Flyers
Heavy Support
Lords of War