Space Marines – Lias Issodon
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
9

Lias Issodon

NoNAME  M WS BS S T W A Ld Sv Base
165
Lias Issodon (base: ?)
1
165
Lias Issodon
7" 2+ 2+ 4 4 6 5 9 3+ ?
Lias Issodon is equipped with: bolt pistol; Malice; Raptorclaw; frag grenades; krak grenades. Your army can only include one LIAS ISSODON model.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Bolt pistol
Bolt pistol
12"
Pistol 1
4
0
1
-
Malice
Malice
30"
Assault 3
5
-4
D3
Each time an attack is made with this weapon, the target does not receive the benefit of cover to its saving throw against that attack.
Each time an attack is made with this weapon, the target does not receive the benefit of cover to its saving throw against that attack.
Raptorclaw
Raptorclaw
Melee
Melee
+1
-3
2
-
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
ABILITIES
ABILITIES
Angels of Death
Iron Halo: This model has a 4+ invulnerable save.
Rites of Battle (Aura): While a friendly CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1.
Chapter Master: In your Command phase, select one friendly CORE or CHARACTER unit within 6" of this model. Until the start of your next Command phase, each time a model in that unit makes an attack, you can re-roll the hit roll.
Stealth Modified Armour: Each time a ranged attack is allocated to this model while it is receiving the benefits of cover, add an additional 1 to any armour saving throw made against that attack.
Grim Hunter: This model is eligible to shoot in a turn in which it Fell Back.
Infiltrate, Isolate, Destroy (Aura): While a friendly RAPTORS CORE INFANTRY unit is within 6" of this model, add 1 to charge rolls made for that unit, and each time that unit is selected to make a Normal Move, Advance or Fall Back, until the end of the phase, add 1" to the Move characteristic of models in that unit.
WARLORD TRAIT!
WARLORD TRAIT!
Inspiring Leader (Aura): Add 1 to the Leadership characteristic of friendly units while they are within 6" of this WARLORD.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, RAPTORS
KEYWORDS: INFANTRY, CHARACTER, CHAPTER MASTER, LIAS ISSODON

Datasheet-related Stratagems

ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem

Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.

Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem

A measured advance allows Space Marines to unleash a steady stream of fire.

Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem

Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.

Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

The LIAS ISSODON keyword is used in the following Space Marines datasheets:

Bolt pistol used in the following datasheets:

HQ
Troops

and others...

– may take Bolt pistol as an option.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Terrain and Cover
Some pieces of terrain can provide certain bonuses to units in your army. Each bonus and how to acquire it is described in the Terrain Features section of the Core Rules. If a model has acquired such a bonus (to it's Save, Leadership or other characteristics), it is considered as receiving the benefit of cover. There are ways for some models to ignore such bonuses while making an attack, but it should be known what kind of benefit is ignored (see the Rare Rules for clarification).
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.

Frag grenades used in the following datasheets:

Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.

Krak grenades used in the following datasheets:

GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Terrain and Cover
Some pieces of terrain can provide certain bonuses to units in your army. Each bonus and how to acquire it is described in the Terrain Features section of the Core Rules. If a model has acquired such a bonus (to it's Save, Leadership or other characteristics), it is considered as receiving the benefit of cover. There are ways for some models to ignore such bonuses while making an attack, but it should be known what kind of benefit is ignored (see the Rare Rules for clarification).
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Fall Back
When a unit Falls Back, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, and when doing so you can move it within Engagement Range of enemy models, but it cannot end its move within Engagement Range of any enemy models – if it cannot do this then it cannot Fall Back. A unit cannot declare a charge in the same turn that it Fell Back. A unit cannot shoot or attempt to manifest a psychic power in the same turn that it Fell Back unless it is TITANIC.

  • Fall Back: Models move up to M".
  • Units that Fall Back cannot charge this turn.
  • Units that Fall Back cannot shoot or manifest psychic powers this turn unless they are TITANIC.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.

  • Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021