Space Marines – Captain Sicarius
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
6

Captain Sicarius

NoNAME  M WS BS S T W A Ld Sv Base
115
Captain Sicarius (base: 25mm)
1
115
Captain Sicarius
6" 2+ 2+ 4 4 5 4 9 2+ 25mm
Captain Sicarius is a single model equipped with: the Talassarian Tempest Blade; artisan plasma pistol; frag grenades; krak grenades. You can only include one of this model in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Artisan plasma pistol
Artisan plasma pistol
12"
Pistol 1
8
-3
2
-
The Talassarian Tempest Blade
The Talassarian Tempest Blade
Melee
Melee
+1
-3
D3
When resolving an attack made with this weapon, an unmodified wound roll of 6 inflicts D3 mortal wounds on the target and the attack sequence ends.
When resolving an attack made with this weapon, an unmodified wound roll of 6 inflicts D3 mortal wounds on the target and the attack sequence ends.
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
ABILITIES
ABILITIES
Angels of Death
Rites of Battle (Aura): While a friendly ULTRAMARINES CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1.
Iron Halo: This model has a 4+ invulnerable save.
Battle-forged Heroes: At the start of the battle round, you can select one friendly ULTRAMARINES CORE or ULTRAMARINES CHARACTER unit within 6" of this model. Until the end of that battle round, that unit has the Objective Secured ability.
WARLORD TRAIT!
WARLORD TRAIT!
Paragon of War: When resolving an attack made by this WARLORD, an unmodified wound roll of 6 inflicts 1 mortal wound on the target in addition to any other damage.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, ULTRAMARINES
KEYWORDS: CHARACTER, INFANTRY, CAPTAIN, SICARIUS

Datasheet-related Stratagems

SONS OF GUILLIMAN1CP
Ultramarines – Battle Tactic Stratagem

Ultramarines fight as the Codex dictates, eschewing individual glory to function as a disciplined, cohesive killing machine.

Use this Stratagem when an ULTRAMARINES INFANTRY or ULTRAMARINES BIKER unit from your army is chosen to shoot with in your Shooting phase or fight with in the Fight phase. If that unit has the Troops Battlefield Role, until the end of that phase, when resolving an attack made by that unit, you can re-roll a hit roll. Otherwise, until the end of that phase, when resolving an attack made by that unit, you can re-roll a hit roll of 1.
INSPIRING COMMAND1CP
Ultramarines – Epic Deed Stratagem

The heroes of Ultramar are amongst the most skilled and inspirational orators in the entire Imperium. When they speak, their words are law.

Use this Stratagem at the start of the Shooting phase or the Fight phase. Select one ULTRAMARINES CHAPTER MASTER, ULTRAMARINES CAPTAIN or ULTRAMARINES LIEUTENANT model from your army. Until the end of the phase, the range of that model’s aura abilities is increased by 3" (to a maximum of 9").
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
SQUAD DOCTRINES1CP
Ultramarines – Strategic Ploy Stratagem

Each squad within an Ultramarines strike force at war is ready to switch to a new combat doctrine at a moment’s notice.

Use this Stratagem at the start of your Movement phase. Select one ULTRAMARINES INFANTRY or ULTRAMARINES BIKER unit from your army, then select either the Devastator, Tactical or Assault Doctrine. Until the start of your next Movement phase, that unit gains the bonus of that combat doctrine instead of the active combat doctrine.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem

Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.

Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem

A measured advance allows Space Marines to unleash a steady stream of fire.

Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem

Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.

Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.
1CP

FIGHT LIKE DEMIGODS

Ultramarines Stratagem

A gathering of courageous heroes, the Victrix Guard are more than capable of cutting their way through entire armies of foes.

Use this Stratagem at the start of the Fight phase. Pick a VICTRIX GUARD unit from your army within 6" of a friendly VICTRIX GUARD CAPTAIN. Add 1 to hit rolls for attacks made by that unit until the end of that phase.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.

Frag grenades used in the following datasheets:

Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.

Krak grenades used in the following datasheets:

GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Objective Secured
Some units have an ability called Objective Secured. A player controls an objective marker if they have any models with this ability within range of that objective marker, even if there are more enemy models within range of that objective marker. If an enemy model within range of an objective marker also has this ability (or a similar ability), then the objective marker is controlled by the player who has the most models within range of that objective marker as normal.

  • Objective Secured: Player controls objective marker if any of their models in range have this ability.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.

The ULTRAMARINES and CHAPTER MASTER keywords are used in the following Space Marines datasheets:

The ULTRAMARINES and LIEUTENANT keywords are used in the following Space Marines datasheets:

Aura Abilities
Some abilities affect models or units in a given range – these are aura abilities. A model with an aura ability is always within range of its effect. The effects of multiple, identically named aura abilities are not cumulative (i.e. if a unit is within range of two models with the same aura ability, that aura ability only applies to the unit once).
Combat Doctrines

When the Adeptus Astartes fight, they employ a set of combat doctrines to eliminate the enemy. After pounding the foe with heavy weapons, warriors advance to lay down a hail of bolter fire before charging forth with chainswords roaring to finish the foe.

If every unit from your army has the ADEPTUS ASTARTES keyword (excluding AGENT OF THE IMPERIUM and UNALIGNED units), this unit gains a bonus (see below) depending on which combat doctrine is active for your army, as follows:
  • During the first battle round, the Devastator Doctrine is active for your army.
  • During the second battle round, the Tactical Doctrine is active for your army.
  • At the start of the third battle round, select either the Tactical Doctrine or Assault Doctrine: until the end of that battle round, the doctrine you selected is active for your army.
  • During the fourth and subsequent battle rounds, the Assault Doctrine is active for your army.
Unless specified otherwise, this bonus is not cumulative with any other rules that improve the Armour Penetration characteristic of a weapon (e.g. the Storm of Fire Warlord Trait).

Devastator Doctrine

The Codex Astartes explains in detail the strategic value of overwhelming firepower applied to key targets at the optimal time in order to eliminate threats and create tactical openings.

While this combat doctrine is active, improve the Armour Penetration characteristic of every Heavy and Grenade weapon that models in this unit are equipped with by 1.

Tactical Doctrine

As the warring armies close upon one another and vicious firefights erupt, the Codex lays out strategies for swiftly seizing the initiative and combining versatility with firepower.

While this combat doctrine is active, improve the Armour Penetration characteristic of every Rapid Fire and Assault weapon that models in this unit are equipped with by 1.

Assault Doctrine

The Codex Astartes leaves no doubt that the killing blow in most engagements must be delivered with a decisive close-quarters strike. It presents plentiful tactical means to achieve this end.

While this combat doctrine is active, improve the Armour Penetration characteristic of every Pistol and Melee weapon that models in this unit are equipped with by 1.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.

  • Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021