Space Marines – Bray’arth Ashmantle
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
11

Bray’arth Ashmantle

NoNAME MWSBSSTWALdSvBase
220
Bray’arth Ashmantle (base: 60mm)
1
220
Bray’arth Ashmantle
6"2+2+878692+60mm
Bray arth Ashmantle is equipped with: Burning Wrath; 2 dreadfire heavy flamers; 2 dreadfire claws. Your army can only include one BRAY’ARTH ASHMANTLE model.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Burning Wrath
Burning Wrath
3"
Assault 2D6
4
0
1
Each time an attack is made with this weapon, that attack automatically hits the target.
Each time an attack is made with this weapon, that attack automatically hits the target.
Dreadfire heavy flamer
Dreadfire heavy flamer
12"
Heavy D6
6
-2
2
Each time an attack is made with this weapon, that attack automatically hits the target.
Each time an attack is made with this weapon, that attack automatically hits the target.
Dreadfire claw
Dreadfire claw
Melee
Melee
x2
-4
4
-
ABILITIES
ABILITIES
Angels of Death
Duty Eternal: Each time an attack is allocated to this model, subtract 1 from the Damage characteristic of that attack (to a minimum of 1).
Wrought by Vulkan: This model has a 5+ invulnerable save. Each time this model would lose a wound, roll one D6: on a 5+, that wound is not lost.
Explodes: When this model is destroyed, roll one D6 before removing it from play. On a 6 it explodes, and each unit within 3" suffers 1 mortal wound.
WARLORD TRAIT!
WARLORD TRAIT!
Inspiring Leader (Aura): Add 1 to the Leadership characteristic of friendly units while they are within 6" of this WARLORD.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, SALAMANDERS
KEYWORDS: VEHICLE, CHARACTER, SMOKESCREEN, DREADNOUGHT, BRAY’ARTH ASHMANTLE

Datasheet-related Stratagems

THE CRUCIBLE OF BATTLE1CP
Salamanders – Battle Tactic Stratagem

Only where the battle is fiercest and the enemy can be faced eye to eye can the Salamanders truly be tested.

Use this Stratagem in the Shooting or Fight phase, when a SALAMANDERS CORE or SALAMANDERS CHARACTER unit from your army is chosen to shoot or fight with. Until the end of that phase, when resolving an attack made by a model in that unit, add 1 to the wound roll.
RISE FROM THE ASHES2CP
Salamanders – Epic Deed Stratagem

The sons of Vulkan have always evinced a tenacious hold upon life while their enemies yet live.

Use this Stratagem in any phase, when a SALAMANDERS CHARACTER model from your army is destroyed. At the end of that phase, roll one D6; on a 4+ return that model to play with 1 wound remaining, placing it as close as possible to its previous position and more than 1" away from any enemy models. This Stratagem cannot be used on the same model more than once per battle.
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
ARMOUR OF CONTEMPT1CP
Adeptus Astartes – Epic Deed Stratagem

The belligerency of some Adeptus Astartes machine spirits makes them unyielding foes to face.

Use this Stratagem in any phase, when an ADEPTUS ASTARTES VEHICLE model from your army would lose a wound as the result of a mortal wound. Until the end of the phase, each time that model would lose a wound as the result of a mortal wound, roll one D6: on a 5+, that wound is not lost.
WISDOM OF THE ANCIENTS1CP
Adeptus Astartes – Epic Deed Stratagem

Each fallen champion who rests within the sarcophagus of a Dreadnought has seen a thousand battles and slain foes beyond counting. All such noble warriors are immensely inspiring to their battle-brothers.

Use this Stratagem in your Command phase. Select one ADEPTUS ASTARTES DREADNOUGHT model from your army (excluding WULFEN and DEATH COMPANY models). Until the start of your next Command phase, that model gains either the Rites of Battle ability or the Tactical Precision ability, as shown below:
  • Rites of Battle (Aura): While a friendly CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1.
  • Tactical Precision (Aura): While a friendly CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a wound roll of 1.
IMMOLATION PROTOCOLS1CP
Salamanders – Strategic Ploy Stratagem

Even in the press and whirl of close combat, the fires of Nocturne are undimmed, a roaring inferno consuming the foe.

Use this Stratagem in your Shooting phase, when a SALAMANDERS unit from your army is chosen to shoot with. Until the end of that phase, change the type of all flame weapons models in that unit are equipped with to Pistol (e.g. an Assault D6 flame weapon becomes Pistol D6).
SMOKESCREEN1CP
Adeptus Astartes – Wargear Stratagem

Throwing down a hail of smoke grenades or deploying their smoke launchers, the Space Marines screen themselves from the enemy.

Use this Stratagem in your opponent's Shooting phase, when an ADEPTUS ASTARTES SMOKESCREEN unit from your army is selected as the target of an attack. Until the end of the phase, each time an attack is made against that unit, subtract 1 from that attack's hit roll.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

The BRAY’ARTH ASHMANTLE keyword is used in the following Space Marines datasheets:

ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.

The WULFEN keyword is used in the following Space Marines datasheets:

The DEATH COMPANY keyword is used in the following Space Marines datasheets:

Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021