Space Marines – Azrael
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
8

Azrael

NoNAME  M WS BS S T W A Ld Sv
170
Azrael
1
170
Azrael
6" 2+ 2+ 4 4 6 5 9 2+
Azrael is equipped with: bolt pistol; Lion’s Wrath; Sword of Secrets; frag grenades; krak grenades. Your army can only include one AZRAEL model.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Bolt pistol
Bolt pistol
12"
Pistol 1
4
0
1
-
Lion’s Wrath
Before selecting targets, select one or both of the profiles below to make attacks with. If you select both, then each time an attack is made with this weapon this phase, subtract 1 from the hit roll.
Lion’s Wrath
Before selecting targets, select one or both of the profiles below to make attacks with. If you select both, then each time an attack is made with this weapon this phase, subtract 1 from the hit roll.
 - Master-crafted boltgun
 - Master-crafted boltgun
24"
Rapid Fire 1
4
-1
2
-
 - Master-crafted plasma gun
 - Master-crafted plasma gun
24"
Rapid Fire 1
8
-4
2
-
Sword of Secrets
Sword of Secrets
Melee
Melee
+2
-4
2
Each time an attack is made with this weapon, an unmodified wound roll of 6 inflicts 1 mortal wound on the target in addition to the normal damage.
Each time an attack is made with this weapon, an unmodified wound roll of 6 inflicts 1 mortal wound on the target in addition to the normal damage.
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
ABILITIES
ABILITIES
Angels of Death, Inner Circle
Iron Halo: This model has a 4+ invulnerable save.
Chapter Master: In your Command phase, select one friendly DARK ANGELS CORE or DARK ANGELS CHARACTER unit within 6" of this model. Until the start of your next Command phase, each time a model in that unit makes an attack, you can re-roll the hit roll.
Watcher in the Dark: Once per battle, this model can attempt to Deny the Witch as if it were a PSYKER. If the model attempting to manifest the psychic power is a CHAOS PSYKER, you can re-roll that Deny the Witch test.
Supreme Tactician: If your army is Battle-forged and this model is your WARLORD, you receive an additional 2 Command points.
Rites of Battle (Aura): While a friendly DARK ANGELS CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1.
Lion Helm (Aura): While a friendly DARK ANGELS INFANTRY or DARK ANGELS BIKER unit is within 6" of this model, models in that unit have a 4+ invulnerable save against ranged attacks.
WARLORD TRAIT!
WARLORD TRAIT!
Brilliant Strategist: In your Command phase, you can select one friendly DARK ANGELS unit within 6" of this WARLORD. Until the start of your next Command phase:
  • Each time a model in that unit makes an attack, if the Tactical Doctrine is active for your army, then the Devastator Doctrine is considered to be active for that attack instead.
  • Each time a model in that unit makes an attack, if the Assault Doctrine is active for your army, then the Tactical Doctrine considered to be active for that attack instead.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, DARK ANGELS
KEYWORDS: CHARACTER, INFANTRY, DEATHWING, INNER CIRCLE, CHAPTER MASTER, AZRAEL

Datasheet-related Stratagems

DEATHWING ASSAULT1CP
Dark Angels – Battle Tactic Stratagem

The Deathwing have learned to begin their sweeping fire patterns immediately upon their arrival from teleportation.

Use this Stratagem in your Shooting phase, when a DEATHWING unit from your army is selected to shoot. Each time a model in that unit makes a ranged attack, if it was set up on the battlefield this turn as a result of a teleport homer or teleport strike, add 1 to that attack’s wound roll.
LINE UNBREAKABLE1CP
Dark Angels – Battle Tactic Stratagem

Many foes have charged the Dark Angels’ lines, only to be met by an unbreakable wall of ceramite.

Use this Stratagem at the start of the Fight phase. Select one DARK ANGELS INFANTRY unit from your army. Until the end of the phase, that unit can only be selected as a target for melee attacks if the attacking model is within Engagement Range of it (note that this means that enemy models that are not within Engagement Range but are within 1/2" of a model from their own unit that is itself within 1/2" of this DARK ANGELS INFANTRY unit cannot target it with melee attacks this phase).
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem

Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.

Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem

A measured advance allows Space Marines to unleash a steady stream of fire.

Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem

Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.

Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

The AZRAEL keyword is used in following Space Marines datasheets:

Bolt pistol used in following datasheets:

HQ
Troops

and others...
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.

Frag grenades used in following datasheets:

Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.

Krak grenades used in following datasheets:

GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.

The FALLEN keyword is used in following Chaos Space Marines datasheets:

Elites
Inner Circle

Those with true knowledge of the Unforgivens history and quest for absolution are utterly intractable warriors who are implacable in their Chapter’s secret hunt for the Fallen.

If this unit has the Grim Resolve Chapter Tactic, or it has the Inheritors of the Primarch Successor tactic and it is using the Chapter Tactic of the Dark Angels, then:

  • Each time a Morale test is taken for this unit, it is automatically passed.
  • While this unit is within Engagement Range of any enemy FALLEN units, unless this unit has the VEHICLE keyword, this unit cannot be selected to Fall Back.
  • Each time you select this unit to Fall Back, unless it has the VEHICLE, RAVENWING or CHAPTER MASTER keywords, roll 2D6: if the result is less than or equal to the unit’s Leadership characteristic it can Fall Back, otherwise it cannot Fall Back and must Remain Stationary instead.
  • Each time an attack is made against this unit, if this unit has the INFANTRY keyword, an unmodified wound roll of 1-3 always fails, irrespective of any abilities that the weapon or the model making that attack may have.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Deny the Witch
When a PSYKER unit attempts to deny a psychic power, you must take a Deny the Witch test for that unit by rolling 2D6. If the total is greater than the result of the Psychic test, the Deny the Witch test is passed and the psychic power is denied. Only one attempt can be made to deny a psychic power. If a PSYKER unit can attempt to deny more than one psychic power in a psychic phase, this will be listed on its datasheet.

  • Deny the Witch: Passed if 2D6 exceeds result of the opposing PSYKER’s Psychic test.
  • Only one attempt can be made to deny each psychic power.
Manifesting Psychic Powers
The same PSYKER unit cannot attempt to manifest Smite more than once during the same battle round. When you select a PSYKER unit to manifest psychic powers, you select one psychic power that unit knows and attempt to manifest it. With the exception of Smite, you cannot attempt to manifest the same psychic power more than once in the same battle round, even with different PSYKER units.

To manifest the psychic power, you must first pass a Psychic test. The opposing player can then select one of their PSYKER units that is within 24" of the PSYKER unit attempting to manifest the power and attempt to deny that power before its effects are resolved by passing a Deny the Witch test.

So long as the Psychic test was successful and the psychic power was not denied by a successful Deny the Witch test, the psychic power is successfully manifested and its effects, which will be described in the power itself, are then resolved. If the PSYKER unit can attempt to manifest more than one psychic power in its Psychic phase, you can then attempt to manifest those, one at a time, as described above. The number of psychic powers each PSYKER unit can attempt to manifest in its Psychic phase is listed on its datasheet.

  • Select psychic power.
  • You cannot select the same psychic power more than once per battle round, unless that power is Smite.
  • Attempt to manifest the psychic power by taking a Psychic test.
  • The opponent can attempt to deny the psychic power by taking a Deny the Witch test.
  • If successfully manifested, resolve the psychic power’s effects.
  • Select another psychic power.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Command Points
The starting number of CPs each player starts with for Battle-forging their army depends on the size of the battle you are playing. This is usually defined in the mission pack that is being played, but if one is not presented in the mission pack, use the following table. Note that the total Power Level is based on the combined power of all the models used in the battle (so the combined Power Level of both your and your opponent's armies). If you are using a game that uses points values, then the points limit is the maximum points limit per side.

COMMAND POINTS
BATTLE SIZETOTAL POWER LEVELPOINTS LIMITCOMMAND POINTS
Combat PatrolUp to 50Up to 5003
Incursion51-100501-10006
Strike Force101-2001001-200012
Onslaught201-3002001-300018

  • Starting number of Command points varies with battle size.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Combat Doctrines

When the Adeptus Astartes fight, they employ a set of combat doctrines to eliminate the enemy. After pounding the foe with heavy weapons, warriors advance to lay down a hail of bolter fire before charging forth with chainswords roaring to finish the foe.

If every unit from your army has the ADEPTUS ASTARTES keyword (excluding AGENT OF THE IMPERIUM and UNALIGNED units), this unit gains a bonus (see below) depending on which combat doctrine is active for your army, as follows:
  • During the first battle round, the Devastator Doctrine is active for your army.
  • During the second battle round, the Tactical Doctrine is active for your army.
  • At the start of the third battle round, select either the Tactical Doctrine or Assault Doctrine: until the end of that battle round, the doctrine you selected is active for your army.
  • During the fourth and subsequent battle rounds, the Assault Doctrine is active for your army.
Unless specified otherwise, this bonus is not cumulative with any other rules that improve the Armour Penetration characteristic of a weapon (e.g. the Storm of Fire Warlord Trait).

Devastator Doctrine

The Codex Astartes explains in detail the strategic value of overwhelming firepower applied to key targets at the optimal time in order to eliminate threats and create tactical openings.

While this combat doctrine is active, improve the Armour Penetration characteristic of every Heavy and Grenade weapon that models in this unit are equipped with by 1.

Tactical Doctrine

As the warring armies close upon one another and vicious firefights erupt, the Codex lays out strategies for swiftly seizing the initiative and combining versatility with firepower.

While this combat doctrine is active, improve the Armour Penetration characteristic of every Rapid Fire and Assault weapon that models in this unit are equipped with by 1.

Assault Doctrine

The Codex Astartes leaves no doubt that the killing blow in most engagements must be delivered with a decisive close-quarters strike. It presents plentiful tactical means to achieve this end.

While this combat doctrine is active, improve the Armour Penetration characteristic of every Pistol and Melee weapon that models in this unit are equipped with by 1.
Teleport Strike

Space Marine strike cruisers and battle barges contain baroque chambers fitted with ancient technologies that can teleport the Angels of Death into the very heart of battle.

During deployment, if every model in this unit has this ability, then you can set up this unit in a teleportarium chamber instead of setting it up on the battlefield. If you do, then in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.

  • Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021