Renegades and Heretics – Renegade Enforcer
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
23 Renegade Enforcer (base: 25mm) |
|||||||||||
| 1 | 23 Renegade Enforcer |
6" | 3+ | 3+ | 3 | 3 | 4 | 3 | 8 | 5+ | 25mm |
A Renegade Enforcer is equipped with: laspistol; brutal assault weapon; frag grenades.
* This datasheet is part of the Warhammer Legends range of rules and can be used in any type of play - open, narrative or matched. However Legends units are not updated by GW and not supported by Wahapedia and therefore not recommended for competitive tournaments.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Autopistol | ||||||
| Autopistol | 12" | Pistol 1 | 3 | 0 | 1 | - |
| Laspistol | ||||||
| Laspistol | 12" | Pistol 1 | 3 | 0 | 1 | - |
| Autogun | ||||||
| Autogun | 24" | Rapid Fire 1 | 3 | 0 | 1 | - |
| Lasgun | ||||||
| Lasgun | 24" | Rapid Fire 1 | 3 | 0 | 1 | - |
| Shotgun | ||||||
| Shotgun | 12" | Assault 2 | 3 | 0 | 1 | If the target is within half range, add 1 to this weapon’s Strength. |
| If the target is within half range, add 1 to this weapon’s Strength. | ||||||
| Brutal assault weapon | ||||||
| Brutal assault weapon | Melee | Melee | User | 0 | 1 | Each time the bearer fights, it makes 1 additional attack with this weapon. |
| Each time the bearer fights, it makes 1 additional attack with this weapon. | ||||||
| Frag grenades | ||||||
| Frag grenades | 6" | Grenade D6 | 3 | 0 | 1 | Blast |
| Blast | ||||||
|
• This model’s laspistol can be replaced with one of the following: 1 autogun; 1 autopistol; 1 lasgun; 1 shotgun; 1 weapon from the Renegades Ranged Weapons list. • This model’s brutal assault weapon can be replaced with one weapon from the Renegades Melee Weapons list.
|
|
ABILITIES | |
ABILITIES |
Baleful Judge (Aura): While a friendly RENEGADES AND HERETICS CORE unit is within 6" of this model, add 2 to the Leadership characteristic of models in that unit. Refractor Field: This model has a 5+ invulnerable save. Covenant of Chaos: Each time this unit fights, if it made a charge move, was charged, or performed a Heroic Intervention this turn, then until that fight is resolved, add 1 to the Strength characteristic of models in this unit. |
| FACTION KEYWORDS: CHAOS, RENEGADES AND HERETICS | |
| KEYWORDS: INFANTRY, CHARACTER, RENEGADE ENFORCER | |
Optional WargearRanged Weapons
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
+2 Bolt pistol | ||||||
+2 Bolt pistol | 12" | Pistol 1 | 4 | 0 | 1 | - |
| Laspistol | ||||||
| Laspistol | 12" | Pistol 1 | 3 | 0 | 1 | - |
+5 Plasma pistol | ||||||
Before selecting targets, select one of the profiles below to make attacks with. | ||||||
+5 Plasma pistol | Before selecting targets, select one of the profiles below to make attacks with. | |||||
| - Standard | ||||||
| - Standard | 12" | Pistol 1 | 7 | -3 | 1 | - |
| - Supercharge | ||||||
| - Supercharge | 12" | Pistol 1 | 8 | -3 | 2 | If any unmodified hit rolls of 1 are made for attacks with this weapon profile, the bearer is destroyed after shooting with this weapon. |
| If any unmodified hit rolls of 1 are made for attacks with this weapon profile, the bearer is destroyed after shooting with this weapon. | ||||||
Melee Weapons
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Brutal assault weapon | ||||||
| Brutal assault weapon | Melee | Melee | User | 0 | 1 | Each time the bearer fights, it makes 1 additional attack with this weapon. |
| Each time the bearer fights, it makes 1 additional attack with this weapon. | ||||||
| Chainsword | ||||||
| Chainsword | Melee | Melee | User | 0 | 1 | Each time the bearer fights, it makes 1 additional attack with this weapon. |
| Each time the bearer fights, it makes 1 additional attack with this weapon. | ||||||
+5 Power axe | ||||||
+5 Power axe | Melee | Melee | +2 | -2 | 1 | - |
+10 Power fist | ||||||
+10 Power fist | Melee | Melee | x2 | -3 | 2 | Each time an attack is made with this weapon, subtract 1 from that attack’s hit roll. |
| Each time an attack is made with this weapon, subtract 1 from that attack’s hit roll. | ||||||
+5 Power maul | ||||||
+5 Power maul | Melee | Melee | +3 | -1 | 1 | - |
+5 Power sword | ||||||
+5 Power sword | Melee | Melee | +1 | -3 | 1 | - |
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.
- Double number of attacks made if target is within half range.
The CHAOS keyword is used in the following Renegades and Heretics datasheets:
Dedicated Transport
Elites
Heavy Support
The RENEGADES AND HERETICS keyword is used in the following Renegades and Heretics datasheets:
Dedicated Transport
Elites
Heavy Support
Army List
Datasheets collatedDedicated Transport
Elites
Flyers
Heavy Support
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:- If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
- When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
- Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
- Can never be used to attack units within the firing unit’s Engagement Range.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.
- Can be shot even if firing model’s unit Advanced.
- Subtract 1 from hit rolls if the firing model’s unit Advanced.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.- Heroic Intervention: Move up to 3".
- Must end closer to the closest enemy model.
Lasgun used in the following datasheets:
Frag grenades used in the following datasheets:
Heavy Support
Elites
Troops
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.
- Only one model can use a Grenade when its unit shoots.
Autopistol used in the following datasheets:
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.
When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.
- Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
- Cannot be shot alongside any other type of weapon.
Laspistol used in the following datasheets:
– may take Laspistol as an option.Autogun used in the following datasheets:
Heavy Support
Brutal assault weapon used in the following datasheets:
– may take Brutal assault weapon as an option.Renegades Melee Weapons
• Brutal assault weapon
• Chainsword
• Power axe
+5
• Power maul
+5
• Power sword
+5
• Power fist
+10
The RENEGADES AND HERETICS and CORE keywords are used in the following Renegades and Heretics datasheets:
Elites
Heavy Support
The INFANTRY keyword is used in the following Renegades and Heretics datasheets:
Elites
Heavy Support
The CHARACTER keyword is used in the following Renegades and Heretics datasheets:
Elites
Bolt pistol used in the following datasheets:
Troops
– may take Bolt pistol as an option.Plasma pistol used in the following datasheets:
Troops
– may take Plasma pistol as an option.Chainsword used in the following datasheets:
– may take Chainsword as an option.Power axe used in the following datasheets:
– may take Power axe as an option.Power fist used in the following datasheets:
HQ
– may take Power fist as an option.Power maul used in the following datasheets:
– may take Power maul as an option.Power sword used in the following datasheets:
– may take Power sword as an option.Shotgun used in the following datasheets:
This datasheet has Elites Battlefield Role. Full list of Renegades and Heretics units sharing same Battlefield Role follows:
Alternative models by Artel W:
