Orks – Grot Bomm Launcha
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
3

Grot Bomm Launcha*

NoNAME  M WS BS S T W A Ld Sv Base
50
Grot Bomm Launcha (base: Use model)
1
50
Grot Bomm Launcha
12" 3+ 5+ 4 5 6 4 6 4+ Use model
A Grot Bomm Launcha is equipped with: Grot-guided bomm.
* This datasheet is part of the Warhammer Legends range of rules and can be used in any type of play - open, narrative or matched. However Legends units are not updated by GW and not supported by Wahapedia and therefore not recommended for competitive tournaments.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Grot-guided bomm
Grot-guided bomm
72"
Heavy 2D6
8
-3
2
Indirect Fire. Blast. This weapon can target units that are not visible to the bearer. The bearer can only shoot with this weapon once per battle. Each time an attack is made with this weapon, the bearer has a Ballistic Skill characteristic of 2+ for that attack.
Indirect Fire. Blast. This weapon can target units that are not visible to the bearer. The bearer can only shoot with this weapon once per battle. Each time an attack is made with this weapon, the bearer has a Ballistic Skill characteristic of 2+ for that attack.
ABILITIES
ABILITIES
Dakka Weapons
Grot Bomm Launcha can receive the following Kustom Jobs upgrades:
 • Shokka Hull+15Power Rating: +1
 • Squig-hide Tyres+15Power Rating: +1
FACTION KEYWORDS: ORK,
KEYWORDS: VEHICLE, GROT BOMM LAUNCHA

Datasheet-related Stratagems

GOT’EM TRAPPED2CP
Blood Axes – Battle Tactic Stratagem

Blood Axes take extra satisfaction in outmanoeuvring the enemy and mobbing them with ladz.

Use this Stratagem at the start of the Fight phase. Select one enemy unit within Engagement Range of two or more BLOOD AXES units (excluding CHARACTER units) from your army. Until the end of the phase, each time a BLOOD AXES model makes an attack against that unit, an unmodified hit roll of 6 scores 1 additional hit.
CAREEN!1CP/2CP
Orks – Battle Tactic Stratagem

If their vehicle is on its last legs, any Ork worth his steering wheel will aim its blazing remains into the nearest cluster of enemies. The ensuing messy explosions never fail to raise a rousing cheer from nearby Ork onlookers.

Use this Stratagem in any phase, when an ORKS VEHICLE model in your army that is not within Engagement Range of any enemy models is destroyed and explodes. That model can make a Normal Move of up to 6" before resolving the explosion. If that VEHICLE is a WAGON or TITANIC model, this Stratagem costs 2CP; otherwise, it costs 1CP.
RAMMING SPEED2CP
Orks – Battle Tactic Stratagem

Ork drivers are infamous for using their vehicles as huge blunt instruments with which to clobber the foe.

Use this Stratagem in your Charge phase, when an ORKS VEHICLE unit from your army is selected to charge.
  • Until the end of the phase, when making a charge roll for that unit, roll 3D6 instead.
  • Until the end of the phase, when that unit finishes a charge move, select one enemy unit that is within Engagement Range of it and roll one D6: on a 2+, that enemy unit suffers D3 mortal wounds.
TELLYPORTA2CP
Orks – Strategic Ploy Stratagem

Nothing shocks the enemy like an angry mob of Boyz, or a looming war effigy suddenly appearing in a blast of green lightning!

Use this Stratagem during deployment. Select one non-MONSTER ORKS unit from your army that has Power Rating 20 or less. You can set up this unit on a tellyporta pad instead of setting it up on the battlefield. If you do so, then in the Reinforcements step of one of your Movement phases, you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models. If you select a TRANSPORT unit, any embarked units remain embarked when this unit is set up on the battlefield.

Kustom Jobs

Shokka Hull

Rewired batteries ensure that careless enemies get a nasty surprise if they come too close.

VEHICLE model only. Each time an enemy unit selects this model as the target of any attacks in the Fight phase, after these attacks have been resolved, roll one D6: on a 4+ that unit suffers D3 mortal wounds.

Squig-hide Tyres

Scaly squig-hide is the perfect material for fast and grippy tyres.

VEHICLE model only (excluding WALKERZ and AIRCRAFT).
  • Add 1" to this model’s Move characteristic.
  • Each time this model Advances, add an additional 2" to this model’s Move characteristic.
Dakka Weapons

Dakka weapons unleash a terrifying volume of shots. Whether these are effective or not depends on the proximity of the target.

Dakka weapons have two values for the number of attacks they make. When a model shoots a Dakka weapon, use the first value if the target is within half the weapon’s range. If the target is not within half the weapon’s range, use the second value instead.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.

The TRANSPORT keyword is used in the following Orks datasheets:


– if this model is equipped with a supa-gatler, it gains the TRANSPORT keyword.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while performing actions.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.

Disable Ads



Boosty subscribers may disable ads:
1. Enter e-mail you have used to login on Boosty.
2. Press Get pin code button (if you don’t have it already)
3. Enter pin code.

Note that login database updated once a day. So, if you are a new booster - try tomorrow. And thank you!
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.

The WAGON keyword is used in the following Orks datasheets:

The WALKERZ keyword is used in the following Orks datasheets:

Grot-guided bomm used in the following datasheets:

Flyers
Indirect Fire Weapons
An Indirect Fire weapon is one that can target units that are not visible to the bearer (e.g. mortars, smart-missile systems, impaler cannons, etc.). If such a weapon targets a unit that is not visible (i.e. no models in a target unit are visible to the firing unit when you selected it as a target), then each time an attack is made with that weapon against that target this phase, worsen the Ballistic Skill characteristic of that attack by 1 and add 1 to any armour saving throws made against that attack.
© Vyacheslav Maltsev 2013-2023