Orks – Boss Zagstruk
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
110 Boss Zagstruk (base: 40mm) |
|||||||||||
| 1 | 110 Boss Zagstruk |
12" | 2+ | 5+ | 6 | 6 | 6 | 6 | 7 | 4+ | 40mm |
Boss Zagstruk is equipped with: blitz missiles; slugga; choppa; Da Vulcha’s Klaws. Your army can only include one BOSS ZAGSTRUK model.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Blitz missiles | ||||||
| Blitz missiles | 18" | Assault D3 | 6 | -1 | D3 | Blast |
| Blast | ||||||
| Slugga | ||||||
| Slugga | 12" | Pistol 1 | 4 | 0 | 1 | - |
| Choppa | ||||||
| Choppa | Melee | Melee | User | -1 | 1 | Each time the bearer fights, it makes 1 additional attack with this weapon. |
| Each time the bearer fights, it makes 1 additional attack with this weapon. | ||||||
| Da Vulcha’s Klaws | ||||||
| Da Vulcha’s Klaws | Melee | Melee | +2 | -3 | 2 | - |
ABILITIES | |
ABILITIES |
’Ere We Go, Waaagh! Full Throttle: Each time this model Advances, do not make an Advance roll. Instead, until the end of the phase, add 6" to the Move characteristic of this model and roll one D6: on a 1, this model suffers 1 mortal wound. Cybork Body: Each time this model would lose a wound, roll one D6: on a 5+, that wound is not lost. Drill Boss (Aura): While a friendly GOFF STORMBOYZ unit is within 6" of this model, each time a Morale test is failed for that unit, until the end of the phase, halve the number of models that flee that unit due to failed Combat Attrition tests (rounding fractions down). Stormboyz Strike: During deployment, you can set up this model high in the skies instead of setting it up on the battlefield. If you do so, then in the Reinforcements step of one of your Movement phases, you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models. |
WARLORD TRAIT! | |
WARLORD TRAIT! |
Big Gob: Add 3" to the range of this WARLORD’s aura abilities (to a maximum of 9"). |
| FACTION KEYWORDS: ORK, GOFFS | |
| KEYWORDS: CHARACTER, INFANTRY, STORMBOY, JUMP PACK, FLY, BOSS ZAGSTRUK | |
Datasheet-related Stratagems
STICK IT TO ’EM, LADZ!1CP
Orks – Boarding Actions – Battle Tactic Stratagem
When Orks gather in large numbers, their sheer impetus carries them into the foe, destroying everything in their path.
Use this Stratagem in the Fight phase, when an ORKS unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes a pile-in or consolidation move, it can move up to an additional 3". This is not cumulative with any other rule that increases the distance models can pile in or consolidate.
DAKKA STORM1CP
Orks – Boarding Actions – Battle Tactic Stratagem
Though it is normally known for its inaccuracy, the typical deluge of Ork shooting is utterly devastating in the close confines of a ship.
Use this Stratagem in your Shooting phase, when an ORKS unit from your army is selected to shoot. Until the end of the phase, each time a model in that unit makes an attack with a Dakka weapon, if a hit is scored, that attack scores 1 additional hit.
LEATHERHIDE1CP
Orks – Boarding Actions – Battle Tactic Stratagem
Orks live tough lives, their hardy greenskin constitutions pushed to extremes by the danger they surround themselves with. As a result, even the lowliest Ork can take a tremendous amount of punishment before being slain.
Use this Stratagem in any phase, when an ORKS unit from your army (excluding GRETCHIN units) is selected as the target of an attack. Until the end of the phase, each time an attack is made against that unit, an unmodified wound roll of 1-3 for that attack fails, irrespective of any abilities that the weapon or the model making the attack may have.
UNBRIDLED CARNAGE2CP
Goff – Battle Tactic Stratagem
When Goffs get stuck into the foe, the carnage is wonderful to behold, at least for other Orks.
Use this Stratagem at the start of the Fight phase. Select one GOFF CORE or GOFF CHARACTER unit from your army that has the No Mukkin’ About Clan Kultur. Until the end of the phase, each time a model in that unit makes an attack, it scores an additional hit on an unmodified hit roll of 5+ instead of 6.
TOO ’ARD TO DIE1CP
Orks – Boarding Actions – Epic Deed Stratagem
It can take a long time for an Ork to grasp the fact that it has been mortally wounded, especially if its enjoying a good fight.
Use this Stratagem in the Fight phase, when an ORKS unit from your army that has not already been selected to fight this phase is selected as the target of an attack. Until the end of the phase, each time a model in that unit is destroyed, do not remove it from play. The destroyed model can fight after the attacking models unit has finished making attacks, and is then removed from play.
ORKS IS NEVER BEATEN2CP
Orks – Epic Deed Stratagem
So resilient is Ork physiology - and so slow are Orks on the uptake - that even killing wounds can take a while to register.
Use this Stratagem in the Fight phase, when an ORKS CHARACTER model in your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. If the selected model’s characteristics change as it takes damage, use the bottom row of that model’s profile when resolving those attacks. After resolving the destroyed model’s attacks, it is then removed.
TELLYPORTA1CP
Orks – Boarding Actions – Strategic Ploy Stratagem
Nothing shocks the enemy like an angry mob of Orks suddenly appearing in a blast of green lightning!
Use this Stratagem during deployment. Select one ORKS unit from your army. You can set up this unit on a tellyporta pad instead of setting it up on the battlefield. If you do so, then in the Reinforcements step of one of your Movement phases, you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models. You can only use this Stratagem once.
PILE THROUGH1CP
Orks – Boarding Actions – Strategic Ploy Stratagem
Orks react to the sudden availability of a good scrap with immediate and enthusiastic aggression.
Use this Stratagem in your Movement phase when a Hatchway is opened, or in your opponent’s Movement phase when a Hatchway is opened. Until the end of the turn, any ORKS units from your army that are now within Engagement Range of one or more enemy units as a result of that Hatchway being opened count as having made a charge move this turn.
GROT SHIELDS2CP
Orks – Strategic Ploy Stratagem
Grots have a variety of uses, from fetching more ammunition to herding loose squigs, and even - despite their protestations - acting as surprisingly effective bullet shields.
Use this Stratagem at the start of your opponent’s Shooting phase. Select one ORKS INFANTRY unit from your army, then select one GRETCHIN INFANTRY unit (excluding CHARACTER units) from your army that is within 6" of that unit. Until the end of the phase, enemy models cannot select the selected ORKS INFANTRY unit as a target if the selected GRETCHIN INFANTRY unit is a closer visible target.
TELLYPORTA2CP
Orks – Strategic Ploy Stratagem
Nothing shocks the enemy like an angry mob of Boyz, or a looming war effigy suddenly appearing in a blast of green lightning!
Use this Stratagem during deployment. Select one non-MONSTER ORKS unit from your army that has Power Rating 20 or less. You can set up this unit on a tellyporta pad instead of setting it up on the battlefield. If you do so, then in the Reinforcements step of one of your Movement phases, you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models. If you select a TRANSPORT unit, any embarked units remain embarked when this unit is set up on the battlefield.
2CP | ||
HOLD ON, BOYZ! Orks Stratagem The Warboss shouts at his ladz to grab onto the Battlewagon and hitch a ride across the battlefield. Use this Stratagem during your Movement phase before you move a BLITZ BRIGADE BATTLEWAGON from your army. Pick a friendly INFANTRY unit wholly within 3" of that model and remove it from the battlefield. After that BATTLEWAGON has moved, set the INFANTRY unit up on the battlefield wholly within 3" of that BATTLEWAGON, and more than 3" from any enemy models. (Note that this infantry unit is not embarked within the Battlewagon and therefore does not count towards the number of models it can transport.) That infantry unit cannot move further this phase (but counts as having moved this turn for all rules purposes) and it cannot charge this turn. | ||
Dakka Weapons
Dakka weapons unleash a terrifying volume of shots. Whether these are effective or not depends on the proximity of the target.
Dakka weapons have two values for the number of attacks they make. When a model shoots a Dakka weapon, use the first value if the target is within half the weapon’s range. If the target is not within half the weapon’s range, use the second value instead.ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.
- Can be shot even if firing model’s unit Advanced.
- Subtract 1 from hit rolls if the firing model’s unit Advanced.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:- If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
- When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
- Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
- Can never be used to attack units within the firing unit’s Engagement Range.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).
- Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
’Ere We Go
Even lumbering Orks can put on a surprising turn of speed when the promise of a good face-to-face fight is in the offing.
You can re-roll charge rolls made for units with this ability.The WARBOSS keyword is used in the following Orks datasheets:
The TRANSPORT keyword is used in the following Orks datasheets:
Flyers
Lords of War
Fortifications
– if this model is equipped with a supa-gatler, it gains the TRANSPORT keyword.The SPEEDBOSS keyword is used in the following Orks datasheets:
The GHAZGHKULL THRAKA keyword is used in the following Orks datasheets:
The ORK and CORE keywords are used in the following Orks datasheets:
Heavy Support
The ORK and CHARACTER keywords are used in the following Orks datasheets:
HQ
Elites
Fast Attack
Heavy Support
The ORK and VEHICLE keywords are used in the following Orks datasheets:
Fast Attack
Heavy Support
Lords of War
Fortifications
The ORK and BIKER keywords are used in the following Orks datasheets:
Elites
Waaagh!
This infamous war cry is known and feared throughout the galaxy. When it echoes across the battlefield, bellowed from hundreds or even thousands of greenskin mouths, even the most stalwart warriors fear the onslaught to come.
If your WARLORD is a WARBOSS, then once per battle, in your Command phase, you can call a Waaagh!. To do so, that WARBOSS must be on the battlefield or embarked on a TRANSPORT that is on the battlefield. If your WARLORD is a SPEEDBOSS, then once per battle, in your Command phase, you can instead call a Speedwaaagh!. To do so, that SPEEDBOSS must be on the battlefield. If your WARLORD is GHAZGHKULL THRAKA, you can instead call a Great Waaagh!. To do so, GHAZGHKULL THRAKA must be on the battlefield or embarked on a TRANSPORT that is on the battlefield.
A Waaagh! and Speedwaaagh! each have two stages. The first stage is active from when the Waaagh! or Speedwaaagh! is called, and lasts until the start of your next Command phase. When the first stage ends, the second stage starts, and lasts until the start of your subsequent Command phase. After this point, the Waaagh! or Speedwaaagh! is no longer active, and has no further effect. Calling a Great Waaagh! is treated as calling both a Waaagh! and a Speedwaaagh! at the same time. Both are active from when a Great Waaagh! is called, and each stage starts and finishes as described above.Waaagh!
Raising his weapons into the air before gesturing towards the enemy, the Warboss bellows his war cry. Every nearby Ork joins in before surging towards the enemy, blades ready in an overwhelming tide.
Stage 1: Call Da Waaagh!
- ORKS CORE and ORKS CHARACTER units from your army are eligible to declare a charge even if they Advanced this turn.
- Add 1 to the Strength and Attacks characteristics of ORKS models from your army.
- ORKS models from your army have a 5+ invulnerable save.
Stage 2: Get Stuck In!
- Add 1 to the Strength and Attacks characteristics of ORKS models from your army.
- ORKS models from your army have a 6+ invulnerable save.
Speedwaaagh!
As the wind and the bullets of the foe whistle past his vehicle, the Speedboss throws back his head and roars his war cry, the call echoing from the ramshackle vehicles following in his wake as they surge forward ever faster.
Stage 1: Da Big Race
- ORKS models from your army do not suffer the penalty incurred to their hit rolls for firing Assault weapons in the same turn their unit Advanced. Each time an ORKS VEHICLE or ORKS BIKER model from your army shoots with a Dakka weapon, make 1 additional attack with that weapon.
- Each time a model in an ORKS VEHICLE or ORKS BIKER unit from your army makes a ranged attack, improve the Armour Penetration characteristic of that attack by 1.
Stage 2: Give ’Em Sum Dakka!
- Each time a model in an ORKS VEHICLE or ORKS BIKER unit from your army makes a ranged attack, improve the Armour Penetration characteristic of that attack by 1.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.- Morale test = D6 + number of models destroyed this turn.
- Unmodified roll of 1 always a success (no models flee).
- If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
The ORK keyword is used in the following Orks datasheets:
HQ
Elites
Fast Attack
The INFANTRY keyword is used in the following Orks datasheets:
HQ
Elites
Fast Attack
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Pile In
When a unit piles in, you can move each model in that unit up to 3" – this is a pile-in move. Each model in the unit must finish its pile-in move closer to the closest enemy model. A model that is already touching an enemy model cannot move, but still counts as having piled in. Remember that a unit must finish any type of move in unit coherency.- Pile in: Move up to 3".
- Must end closer to the closest enemy model.
Consolidate
When a unit consolidates, you can move each model in the unit up to 3" – this is a Consolidation move. Each model must finish its Consolidation move closer to the closest enemy model. A model that is already touching an enemy model cannot move, but still counts as having consolidated. Remember that a unit must finish any type of move in unit coherency.- Consolidate: Move up to 3".
- Must end closer to the closest enemy model.
The GRETCHIN keyword is used in the following Orks datasheets:
Troops
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:
| ||||||||||||||
If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The GOFFS and CORE keywords are used in the following Orks datasheets:
Heavy Support
The GOFFS and CHARACTER keywords are used in the following Orks datasheets:
HQ
Fast Attack
Heavy Support
The ORK and INFANTRY keywords are used in the following Orks datasheets:
HQ
Elites
Fast Attack
The GRETCHIN and INFANTRY keywords are used in the following Orks datasheets:
Troops
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Engagement Range
When measuring to see if one model is within Engagement Range of another, if the shortest line between those two models passes through an open Hatchway, then those models are within Engagement Range if they are within 2" of one another, as shown below.
- Both Models B and C are within Engagement Range of Model A, as the shortest distance between them passes through an open Hatchway and they are within 2" of one another.
- However, Model D is not within 2" of Model A and so these two are not within Engagement Range.
Operate Hatchway
One or more units from your army can start to perform this action at the end of the Move Units step of your Movement phase if they are within 1" of a Hatchway. This action can be performed by any unit that is not within Engagement Range of any enemy models, even if that unit is being affected by a rule that would normally prevent it from performing actions. The action is completed at the end of your Movement phase if no enemy models are within 1" of that Hatchway. If there are any enemy models within 1" of that Hatchway, your opponent can attempt to prevent the action from being completed. If they do so, roll off with your opponent; each player adds the Strength characteristic of one of their models that is within 1" of that Hatchway to their respective scores. If you win, the action is completed; otherwise, the action fails. If completed, that Hatchway opens (if it was closed) or closes (if it was open).If a Hatchway opens and units on opposite sides of that Hatchway now find themselves within Engagement Range of each other, then those units will be eligible to fight during the subsequent Fight phase, but neither of those units count as having made a charge move this turn.
Before opening the Hatchway, Model A and Model B are not within Engagement Range of one another.
After Model A opens the Hatchway, it is within Engagement Range of Model B as the shortest distance between them passes through an open Hatchway and they are within 2" of one another. In the following Fight phase, both units will be eligible to fight, but Model A’s unit will not count as having charged that turn.
The BATTLEWAGON keyword is used in the following Orks datasheets:
Army List
Datasheets collatedDedicated Transport
Elites
Fast Attack
Heavy Support
Lords of War
Fortifications
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.
When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.
- Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
- Cannot be shot alongside any other type of weapon.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Slugga used in the following datasheets:
HQ
Heavy Support
– may take Slugga as an option.Choppa used in the following datasheets:
HQ
Heavy Support
– may take Choppa as an option.The CHARACTER keyword is used in the following Orks datasheets:
HQ
Elites
Fast Attack
Heavy Support
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.- Advance: Models move up to M+D6".
- Cannot move within Engagement Range of enemy models.
- Units that Advance cannot shoot or charge this turn.
The JUMP PACK keyword is used in the following Orks datasheets:
Fast Attack
The FLY keyword is used in the following Orks datasheets:
This datasheet has HQ Battlefield Role. Full list of Orks units sharing same Battlefield Role follows:
The GOFFS keyword is used in the following Orks datasheets:
HQ
Elites
Fast Attack
Combat Attrition Tests
If a unit fails a Morale test, then after the first model has fled the unit, you must take Combat Attrition tests. To do so, roll one D6 for each remaining model in that unit, subtracting 1 from the result if the unit is below Half-strength; for each result of 1, one additional model flees that unit. You decide which models from your unit flee – those models are removed from play and count as having been destroyed, but they never trigger any rules that are used when a model is destroyed.- Combat Attrition tests: Roll one D6 for each remaining model in unit; for each 1, one additional model flees.
- Subtract 1 from Combat Attrition tests if unit is below Half-strength.
The BOSS ZAGSTRUK keyword is used in the following Orks datasheets:
The GOFFS and STORMBOYZ keywords are used in the following Orks datasheets:
Fast Attack
The STORMBOY keyword is used in the following Orks datasheets:
Fast Attack
