Necrons – Triarch Stalker
This datasheet does not meet the selection criteria (see Settings tab).
7

Triarch Stalker

NoNAME MWSBSSTW!ALdSvBase
135
Triarch Stalker (base: Use model)
1
135
Triarch Stalker
10"3+3+767-123103+Use model
8"4+4+764-63103+
6"5+5+761-33103+
A Triarch Stalker is equipped with: heat ray; Stalker's forelimbs.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
+5
Heat ray
Before selecting targets, select one of the profiles below to make attacks with.
+5
Heat ray
Before selecting targets, select one of the profiles below to make attacks with.
 - Dispersed
 - Dispersed
12"
Heavy 2D6
5
-1
1
Each time an attack is made with this weapon, that attack automatically hits the target.
Each time an attack is made with this weapon, that attack automatically hits the target.
 - Focused
 - Focused
24"
Heavy 2
8
-4
D6
Each time an attack made with this weapon targets a unit within half range, that attack has a Damage characteristic of D6+2.
Each time an attack made with this weapon targets a unit within half range, that attack has a Damage characteristic of D6+2.
Particle shredder
Particle shredder
24"
Heavy 8
6
-1
2
-
+15
Twin heavy gauss cannon
+15
Twin heavy gauss cannon
30"
Heavy 6
7
-3
D3
-
Stalker’s forelimbs
Stalker’s forelimbs
Melee
Melee
User
-2
3
-
WARGEAR OPTIONS
WARGEAR OPTIONS
 • This model's heat ray can be replaced with one of the following: 1 particle shredder; 1 twin heavy gauss cannon.
ABILITIES
ABILITIES
Living Metal, Command Protocols
Quantum Shielding: This model has a 5+ invulnerable save. In addition, each time an attack is made against this model, an unmodified wound roll of 1-3 always fails, irrespective of any abilities that the weapon or the attacker may have.
Targeting Relay: Each time this model makes a ranged attack against an enemy unit, if a hit is scored, until the end of the phase, each time another friendly NECRONS model makes a ranged attack against that enemy unit, re-roll a hit roll of 1.
Explodes: When this model is destroyed, roll one D6 before removing it from play. On a 6 it explodes, and each unit within 6" suffers D3 mortal wounds.
FACTION KEYWORDS: NECRONS
KEYWORDS: VEHICLE, DYNASTIC AGENT, QUANTUM SHIELDING, TRIARCH, TRIARCH STALKER

Datasheet-related Stratagems

JUDGEMENT OF THE TRIARCH1CP
Necrons – Battle Tactic Stratagem

Those who defy the will of the Final Triarch are subject to swift and merciless retribution.

Use this Stratagem in your Shooting phase, when a TRIARCH unit is selected to shoot, or in the Fight phase, when a TRIARCH unit is selected to fight. Until the end of the phase, each time a model in that unit makes an attack, add 1 to that attack's hit roll.
STELLAR ALIGNMENT PROTOCOL2CP/1CP
Necrons – Strategic Ploy Stratagem

Driven by Cryptek manipulation, a key Necron war engine activates backup systems in order to fulfil its crucial pre-aligned role in the wider battle plan.

Use this Stratagem in the Command phase. Select one NECRONS VEHICLE model from your army that has a Wounds characteristic of 10 or more. Until the start of your next Command phase, that model is considered to have its full wounds remaining for the purposes of determining what characteristics on its profile to use. If that model has the TITANIC keyword, this Stratagem costs 2CP; otherwise it costs 1CP.
CURSE OF THE PHAERON3CP/1CP
Necrons – Strategic Ploy Stratagem

Necron nobles are jealously protective of their armoury - should foes destroy such a jewel of the dynastic hoard, they risk triggering vengeance protocols intended to demonstrate the Necrons' displeasure in an explosive fashion.

Use this Stratagem in any phase, when a NECRONS VEHICLE model from your army is destroyed. Do not roll to see if that model explodes: it does so automatically. If that model has the TITANIC keyword, this Stratagem costs 3CP; otherwise it costs 1 CP.
DISINTEGRATION CAPACITORS1CP
Necrons – Wargear Stratagem

Molecular disintegration emitters activate within these Necrons' weapons even as they open fire, flaying away additional layers of enemy armour in explosive eruptions of glowing dust.

Use this Stratagem in your Shooting phase, when a NECRONS unit from your army is selected to shoot. Until the end of the phase, each time a model in that unit makes an attack with a gauss weapon, an unmodified hit roll of 6 automatically wounds the target.
QUANTUM DEFLECTION1CP
Necrons – Wargear Stratagem

Necron quantum shielding is a true marvel of techno-arcana, phasing into existence at the moment of impact and capable of adaptive remodulation to diffuse and deflect even the most powerful enemy attacks.

Use this Stratagem in any phase, when a NECRONS QUANTUM SHIELDING unit from your army is selected as the target of an attack. Until the end of the phase, models in that unit have a 4+ invulnerable save.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Living Metal

The Necrons' semi-sentient metal skin lets them heal mid-battle.

At the start of your Command phase, each model in this unit regains 1 lost wound.

The DYNASTIC AGENT keyword is used in the following Necrons datasheets:

Lords of War

The C’TAN SHARD keyword is used in the following Necrons datasheets:

Lords of War
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Fall Back
When a unit Falls Back, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, and when doing so you can move it within Engagement Range of enemy models, but it cannot end its move within Engagement Range of any enemy models – if it cannot do this then it cannot Fall Back. A unit cannot declare a charge in the same turn that it Fell Back. A unit cannot shoot or attempt to manifest a psychic power in the same turn that it Fell Back unless it is TITANIC.

  • Fall Back: Models move up to M".
  • Units that Fall Back cannot charge this turn.
  • Units that Fall Back cannot shoot or manifest psychic powers this turn unless they are TITANIC.
Light Cover
When an attack made with a ranged weapon wounds a model that is receiving the benefits of cover from this terrain feature, add 1 to the saving throw made against that attack (invulnerable saving throws are not affected).

  • +1 to saving throws against ranged weapons.
  • Invulnerable saving throws unaffected.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Overwatch
Certain rules enable units to fire Overwatch at an enemy unit before it can charge. If an enemy unit declares a charge that targets one or more units from your army that have such a rule, each of those units can fire Overwatch before the charge roll is made. A unit cannot fire Overwatch if there are any enemy units within Engagement Range of it. Overwatch is resolved like a normal shooting attack (albeit one resolved in the Charge phase) and uses all the normal rules, except that an unmodified hit roll of 6 is always required for a successful hit roll, irrespective of the firing model’s Ballistic Skill or any hit roll modifiers. In addition, when a model fires Overwatch, it does so at the charging unit. Any rule that states the unit cannot be targeted unless it is the closest target (e.g. Look Out, Sir) does not apply when firing Overwatch.

  • Overwatch: Before charge roll made, all charge targets that can fire Overwatch can do so.
  • Can never fire Overwatch while enemy units are in Engagement Range.
  • When firing Overwatch, shoot with unit, but attacks only hit on unmodified 6s.
Defensible (Set to Defend/Hold Steady)
If every model in an INFANTRY unit is on or in an Area Terrain feature with this trait, then it can either Hold Steady or it can Set to Defend (see below) when an enemy unit declares a charge against it.

If every model in an INFANTRY unit is within 3" of an Obstacle terrain feature with this trait, then it can either Hold Steady or it can Set to Defend (see below) when an enemy unit declares a charge against it if, were you to draw a straight line, 1mm in thickness, between the closest parts of the bases (or hulls) of the two closest models in the two units, that line would pass over or through that terrain feature.

A unit cannot Hold Steady or Set to Defend while it is within Engagement Range of any enemy units.

If a unit Holds Steady, any Overwatch attacks made by that unit this phase will score hits on rolls of 5+. If a unit Sets to Defend, it cannot fire Overwatch this phase, but you add 1 to hit rolls when resolving attacks made with melee weapons by models in that unit until the end of the next Fight phase.

  • INFANTRY units can Hold Steady or Set to Defend (if no enemy within Engagement Range}.
  • Hold Steady: Overwatch attacks hit on 5+.
  • Set to Defend: Cannot fire Overwatch but add 1 to hit rolls in next Fight phase.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Terrain and Cover
Some pieces of terrain can provide certain bonuses to units in your army. Each bonus and how to acquire it is described in the Terrain Features section of the Core Rules. If a model has acquired such a bonus (to it's Save, Leadership or other characteristics), it is considered as receiving the benefit of cover. There are ways for some models to ignore such bonuses while making an attack, but it should be known what kind of benefit is ignored (see the Rare Rules for clarification).
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.

  • Heroic Intervention: Move up to 3".
  • Must end closer to the closest enemy model.
Reanimation Protocols

Should a Necron be slain, its body becomes wreathed in an eerie glow. Crawling limbs reattach. Sundered torsos and smashed skulls reform amidst emerald sparks. Witchlights flare back to life within dead eye-lenses and the Necron rises again, shambling back into their battle line. Those Necrons too catastrophically damaged to reform vanish instead, teleported away to their tombs for repair.

Each time an enemy unit shoots or fights, after it makes its attacks, if any models in this unit were destroyed as a result of those attacks but this unit was not destroyed, this unit's reanimation protocols are enacted and those destroyed models begin to reassemble.

Each time a unit's reanimation protocols are enacted, make Reanimation Protocol rolls for that unit by rolling a number of D6 equal to the combined Wounds characteristics of all the reassembling models. Each Reanimation Protocol roll of 5+ is put into a pool. A Reanimation Protocol roll can never be modified by more than -1 or +1.

If the number of dice in that pool is greater than or equal to the Wounds characteristic of any of the reassembling models, select one of those models to be Reanimated. A Reanimated model:
  • Is added back to its unit with its full wounds remaining.
  • Can only set up within Engagement Range of enemy units that are already within Engagement Range of the Reanimated model's unit.
  • Cannot, if it is your Charge phase, be set up closer to any enemy units that are targets of a charge declared by its unit this phase.
  • No longer counts as having been destroyed for the purposes of Morale tests this turn.
You then reduce the number of dice in that pool by a number equal to the Wounds characteristic of the Reanimated model and repeat this process until either there are no more reassembling models, or the number of dice remaining in the pool is less than the Wounds characteristic of any of the reassembling models. Any models that did not Reanimate fail to reassemble, and any dice remaining in the pool are discarded.

Example: In the Shooting phase, an enemy unit targets and makes its attacks against a 5-strong unit of Lychguard, destroying 3 models and leaving another with only one wound left. The Lychguard units reanimation protocols are enacted, and you now make Reanimation Protocol rolls for it. Each Lychguard has a Wounds characteristic of 2, so you would roll a total of six D6s. If you rolled 1, 3, 4, 5, 5 and 6, you would put three dice into a pool. This pool contains enough dice to Reanimate one of the destroyed models, and so it is set back up on the battlefield. After that model has been Reanimated, there is only one dice remaining in your pool. This is not enough to Reanimate another reassembling Lychguard model, as it is less than the models Wounds characteristic; this dice is therefore discarded.
Aura Abilities
Some abilities affect models or units in a given range – these are aura abilities. A model with an aura ability is always within range of its effect. The effects of multiple, identically named aura abilities are not cumulative (i.e. if a unit is within range of two models with the same aura ability, that aura ability only applies to the unit once).
Command Protocols

The Necron nobility make war in a codified and relentless fashion. Their command protocols crackle out across multi-dimensional spectra from carrier-wave projectors, compelling their semi-sentient soldiery into battle one overriding directive at a time.

If every unit from your army (excluding DYNASTIC AGENT, C’TAN SHARD and UNALIGNED units) is from the same dynasty, and you select a NOBLE model to be your WARLORD, this unit is eligible to benefit from this ability and the following rules apply.

After both sides have deployed, but before you have determined who will have the first turn, you must assign a different one of the command protocols below to each of the first five battle rounds, and note this down secretly on your army roster.

Example: Matts army is led by an Overlord (a NOBLE), and every model in it is from the same dynasty, therefore he must assign command protocols. He selects the following, writing them down on his army roster:
  • Battle Round 1 = 2 (Sudden Storm)
  • Battle Round 2 = 3 (Vengeful Stars)
  • Battle Round 3 = 5 (Undying Legions)
  • Battle Round 4 = 4 (Hungry Void)
  • Battle Round 5+ = 1 (Eternal Guardian)
Designers Note: If you have a set of Necrons Datacards, you can instead assign your command protocols by selecting the five corresponding cards you wish to use and placing them in a face-down deck in an order such that - by turning over the top card at the start of each battle round - you reveal the command protocol that will be active for your army that battle round.


At the start of each battle round, if any NOBLE units from your army are on the battlefield, the command protocol that you assigned to that battle round becomes active for your army until the end of that battle round. Each command protocol is made up of two directives. When a command protocol becomes active for your army, reveal it to your opponent and select one of its directives. Until the assigned command protocol stops being active, while a unit that is eligible to benefit from this ability is within 6" of a friendly NECRONS CHARACTER model (excluding C’TAN SHARD models), that unit benefits from the selected directive.

If the battle lasts for more than five battle rounds, then until the end of the battle, whichever command protocol was active in the fifth battle round remains active. The available command protocols are show below.

1. Protocol of the Eternal Guardian

Temporary dimensional shielding flickers into being around the Necrons as they stand tall upon the battlefield like graven statues.

  • Directive 1: Each time an attack is made against this unit, if it did not make a Normal Move, Advance or Fall Back this battle round, this unit receives the benefit of Light Cover
  • Directive 2: Each time an enemy unit declares a charge against this unit, if this unit is not within Engagement Range of any enemy units, it can either Hold Steady or Set to Defend.
  • If it Holds Steady, then until the end of the phase, any Overwatch attacks made by models in that unit score hits on unmodified rolls of 5+, instead of 6.
  • If it Sets to Defend, then until the end of the phase, it cannot fire Overwatch, but until the end of the next Fight phase, each time a model in that unit makes a melee attack, add 1 to that attacks hit roll.

2. Protocol of the Sudden Storm

Arcing energies leap from one Necron unit to the next, lending speed to their limbs and causing their eye lenses to blaze.

  • Directive 1: Add 1" to the Move characteristic of models in this unit.
  • Directive 2: If this unit is performing an action, it can still make attacks with ranged weapons without that action failing.

3. Protocol of the Vengeful Stars

Criss-cross fire leaps from the Necron ranks, forming a blazing corona of deadly energy from which there can be no escape.

  • Directive 1: Each time a model in this unit makes a ranged attack, on an unmodified wound roll of 6, improve the Armour Penetration characteristic of that attack by 1.
  • Directive 2: Each time a model in this unit makes a ranged attack that targets a unit within half range, the target does not receive the benefits of cover to its saving throw against that attack.

4. Protocol of the Hungry Void

The Necrons strike with data-augmented accuracy, their murderous attacks as inescapable as the killing cold of space.

  • Directive 1: Each time a model in this unit makes a melee attack, on an unmodified wound roll of 6, improve the Armour Penetration characteristic of that attack by 1.
  • Directive 2: Each time a model in this unit makes a melee attack, if this unit made a charge move, was charged or performed a Heroic Intervention this turn, add 1 to that attacks Strength characteristic.

5. Protocol of the Undying Legions

At a hissing static signal, nanoscarabs are released in boiling black clouds that whirl about the legions and effect constant repairs.

  • Directive 1: Each time this unit uses its Living Metal ability, each model in this unit regains 1 additional lost wound.
  • Directive 2: Each time you make Reanimation Protocol rolls for this unit, you can re-roll one of the dice.

6. Protocol of the Conquering Tyrant

The legions employ the strategies of their masters in perfect synchronicity, laying down hails of mechanically coordinated fire.

  • Directive 1: Add 3" to the range of this unit’s aura abilities (to a maximum of 12") and increase the range of the following abilities this unit has by 3" (to a maximum of 12"): Lord’s Will; My Will Be Done; Rites of Reanimation.
  • Directive 2: This unit is eligible to shoot in a turn in which it Fell Back, but if it does, then until the end of the turn, each time a model in this unit makes a ranged attack, subtract 1 from that attack’s hit roll.

Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.

The DYNASTIC AGENT keyword is used in the following Necrons datasheets:

Lords of War

The QUANTUM SHIELDING keyword is used in the following Necrons datasheets:

Dedicated Transport

The TRIARCH keyword is used in the following Necrons datasheets:

The NECRONS and QUANTUM SHIELDING keywords are used in the following Necrons datasheets:

Dedicated Transport
© Vyacheslav Maltsev 2013-2021