Genestealer Cults – Patriarch
This datasheet does not meet the selection criteria (see Settings tab).
7

Patriarch

NoNAME  M WS BS S T W A Ld Sv
135
Patriarch
1
135
Patriarch
8" 2+ 5+ 6 5 6 6 10 4+
15
Familiar
0‑2
15
Familiar
6" 3+ - 4 3 1 2 8 6+
A Patriarch is a single model armed with monstrous rending claws. It may be accompanied by up to 2 Familiars (Power Rating +1 per two models).
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Monstrous rending claws
Monstrous rending claws
Melee
Melee
User
-3
D3
You can re-roll failed wound rolls for this weapon. In addition, each time you make a wound roll of 6+ for this weapon, that hit is resolved with an AP of -6 and Damage of 3.
You can re-roll failed wound rolls for this weapon. In addition, each time you make a wound roll of 6+ for this weapon, that hit is resolved with an AP of -6 and Damage of 3.
ABILITIES
ABILITIES
Cult Ambush
Brood Telepathy: Add 1 to hit rolls for attacks made by <CULT> GENESTEALER units in the Fight phase whilst they are within 6" of any friendly <CULT> PATRIARCH models.
Living Idol: <CULT> and BROOD BROTHERS units automatically pass Morale tests whilst they are within 6" of any friendly <CULT> PATRIARCH models.
Lightning Reflexes: A Patriarch has a 5+ invulnerable save.
Swift and Deadly: This unit can charge even if it Advanced during its turn.
Familiars: If a Patriarch is accompanied by any Familiars, then once per game, at the end of its controlling player’s psychic phase, its Familiars can lend it additional power. If they do so, the Patriarch can immediately attempt to manifest one additional psychic power.

When rolling to wound this unit, always use the Patriarch’s Toughness while it is on the battlefield. The death of a Familiar is ignored for the purposes of Morale tests. Familiars are considered to have the CHARACTER keyword for the purposes of shooting attacks.
PSYKER
PSYKER
A Patriarch can attempt to manifest one psychic power in each friendly Psychic phase, and attempt to deny one psychic power in each enemy Psychic phase. It knows the Smite power and two psychic powers from the Broodmind discipline.
FACTION KEYWORDS: TYRANIDS, GENESTEALER CULTS, <CULT>
KEYWORDS (Patriarch): INFANTRY, CHARACTER, GENESTEALER, PSYKER, PATRIARCH
KEYWORDS (Familiars): INFANTRY, FAMILIAR

Datasheet-related Stratagems

1CP

THE CULT’S PSYCHE

Genestealer Cults Stratagem

Maguses descended from the same line often have enormously strong psychic bonds.

Use this Stratagem before the battle. Select one <CULT> MAGUS unit from your army. That unit can attempt to manifest one additional psychic power in your Psychic phase. When a Psychic test is taken for that unit, add 1 to the total for each other friendly <CULT> PSYKER unit within 3" (to a maximum of +3). You can only use this Stratagem once per battle.
2CP

LURK IN THE SHADOWS

Genestealer Cults Stratagem

In dark nooks and crevices the true believers of the cult whisper and skulk, all but invisible to those who approach.

Use this Stratagem at the start of your opponent’s Shooting phase. Select a GENESTEALER CULTS INFANTRY unit from your army that is entirely on or within any terrain feature. Until the end of the phase, enemy models can only shoot that unit if it is the closest enemy unit that is visible to them.
1CP

BROODCOVEN

Genestealer Cults Stratagem

The war leaders of the cult each have their own methods and specialisations, the better to entrap and slay the enemy.

Use this Stratagem before the battle if your Warlord is a PATRIARCH. Select up to one MAGUS and up to one PRIMUS from your army. Generate a Warlord Trait for each selected model (note that these models are only regarded as your Warlord for the purposes of these Warlord Traits). All three models must have a different Warlord Trait. This Stratagem can only be used once per battle.
1CP

HYPER-METABOLISM

Genestealer Cults Stratagem

Even the most grievous wounds can be sealed over by those with the alien biology of the Tyranid under their skin.

Use this Stratagem at the start of your Movement phase. Select a GENESTEALER CULTS CHARACTER from your army. That model regains D3 lost wounds.
3CP

A PERFECT AMBUSH

Genestealer Cults Stratagem

The faithful spring the perfect ambush; the foe is greeted with a hail of bullets and a horde of fanatics bearing down upon them.

Use this Stratagem in the Movement phase, immediately after you set up an INFANTRY or BIKER unit from your army that has the Cult Ambush ability on the battlefield. That unit can either make a Normal Move of up to D6" as if it were your Movement phase (even if it has arrived as Reinforcements), or it can shoot with all of its ranged weapons as if it were your Shooting phase (using this Stratagem in your own turn does not prevent that unit from shooting in your Shooting phase or making a charge move in the Charge phase of this turn). You cannot use this Stratagem on a unit that disembarked from a TRANSPORT this turn.
2CP

TELEPATHIC SUMMONS

Genestealer Cults Stratagem

The cult’s kin are drawn from the hidden places of the world with a summons heard in the soul as much as by the ears.

Use this Stratagem at the start of your Psychic phase. Select a <CULT> PSYKER model from your army. That model cannot attempt to manifest any psychic powers this phase. Instead, roll 3D6; you can add one new <CULT> INFANTRY or BIKER unit to your army if it has the Cult Ambush ability and its Power Rating is equal to or less than this roll (otherwise, no new unit is added). That unit is immediately set up on the battlefield anywhere that is more than 9" from any enemy models.
1CP/3CP

GRANDSIRE’S GIFTS

Genestealer Cults Stratagem

The relics taken reverently from the Patriarch’s lair include captured guns, sentient blades and strange biomantic artefacts.

Use this Stratagem before the battle. Your army can have one extra Sacred Relic of the Cult for 1 CP, or two extra sacred Relics of the Cult for 3 CPs. All of the Sacred Relics of the Cult that you include must be different and be given to different GENESTEALER CULTS CHARACTERS. This Stratagem can only be used once per battle.
1CP

VENGEANCE FOR THE MARTYRED

The Pauper Princes Stratagem

The faithful flock of the Pauper Princes go to great lengths to protect their elders and betters – should one of their heroes fall, they will swarm like angered hornets to take their revenge.

Use this Stratagem when an enemy unit destroys a PAUPER PRINCES CHARACTER model from your army. For the remainder of the battle, add 1 to hit rolls for attacks made by friendly PAUPER PRINCES models when they target the enemy unit that destroyed that character.

This datasheet has HQ Battlefield Role. Full list of Genestealer Cults units sharing same Battlefield Role follows:

Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.

The <CULT> and GENESTEALER keywords are used in following Genestealer Cults datasheets:

The <CULT> and PATRIARCH keywords are used in following Genestealer Cults datasheets:

Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.

The <CULT> and PATRIARCH keywords are used in following Genestealer Cults datasheets:

Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Manifesting Psychic Powers
The same PSYKER unit cannot attempt to manifest Smite more than once during the same battle round. When you select a PSYKER unit to manifest psychic powers, you select one psychic power that unit knows and attempt to manifest it. With the exception of Smite, you cannot attempt to manifest the same psychic power more than once in the same battle round, even with different PSYKER units.

To manifest the psychic power, you must first pass a Psychic test. The opposing player can then select one of their PSYKER units that is within 24" of the PSYKER unit attempting to manifest the power and attempt to deny that power before its effects are resolved by passing a Deny the Witch test.

So long as the Psychic test was successful and the psychic power was not denied by a successful Deny the Witch test, the psychic power is successfully manifested and its effects, which will be described in the power itself, are then resolved. If the PSYKER unit can attempt to manifest more than one psychic power in its Psychic phase, you can then attempt to manifest those, one at a time, as described above. The number of psychic powers each PSYKER unit can attempt to manifest in its Psychic phase is listed on its datasheet.

  • Select psychic power.
  • You cannot select the same psychic power more than once per battle round, unless that power is Smite.
  • Attempt to manifest the psychic power by taking a Psychic test.
  • The opponent can attempt to deny the psychic power by taking a Deny the Witch test.
  • If successfully manifested, resolve the psychic power’s effects.
  • Select another psychic power.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while performing actions.
Deny the Witch
When a PSYKER unit attempts to deny a psychic power, you must take a Deny the Witch test for that unit by rolling 2D6. If the total is greater than the result of the Psychic test, the Deny the Witch test is passed and the psychic power is denied. Only one attempt can be made to deny a psychic power. If a PSYKER unit can attempt to deny more than one psychic power in a psychic phase, this will be listed on its datasheet.

  • Deny the Witch: Passed if 2D6 exceeds result of the opposing PSYKER’s Psychic test.
  • Only one attempt can be made to deny each psychic power.
Smite
Smite has a warp charge value of 5. Add 1 to the warp charge value of this psychic power for each other attempt that has been made to manifest this power by a unit from your army in this phase, whether that attempt was successful or not. If manifested, the closest enemy unit within 18" of and visible to the psyker suffers D3 mortal wounds. If the result of the Psychic test was 11 or more, that unit suffers D6 mortal wounds instead.

  • Warp Charge 5: A Psychic test of 5+ is required to manifest Smite.
  • Warp charge increases by 1 for each other attempt to manifest Smite made in this phase.
  • If manifested, closest visible enemy unit in 18" suffers D3 mortal wounds.
  • If manifested with a Psychic test result of 11+, enemy instead suffers D6 mortal wounds.

The GENESTEALER keyword is used in following Genestealer Cults datasheets:

The PSYKER keyword is used in following Genestealer Cults datasheets:

The FAMILIAR keyword is used in following Genestealer Cults datasheets:

Elites

The <CULT> and MAGUS keywords are used in following Genestealer Cults datasheets:

Psychic Tests
When a PSYKER unit attempts to manifest a psychic power, you must take a Psychic test for that unit by rolling 2D6. If the total is equal to or greater than that power’s warp charge value, the Psychic test is passed. If you roll a double 1 or a double 6 when taking a Psychic test, that unit immediately suffers Perils of the Warp.

  • Psychic test: Passed if 2D6 equals or exceeds psychic power’s warp charge.
  • If double 1 or double 6 rolled, PSYKER suffers Perils of the Warp.

The <CULT> and PSYKER keywords are used in following Genestealer Cults datasheets:

The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.

The PATRIARCH keyword is used in following Genestealer Cults datasheets:

The MAGUS keyword is used in following Genestealer Cults datasheets:

The PRIMUS keyword is used in following Genestealer Cults datasheets:

Warlord Traits
Warlord Trait is a bonus that your Warlord receives upon being nominated. Such Traits can be found in Codices, Supplements and another Games Workshop publications. Any Warlord can have the Inspiring Leader Warlord Trait. Normally, only one Warlord Trait can be given to the Warlord, but there are ways to bypass this restriction (e.g. by using Stratagems). You can choose a Warlord Trait randomly by rolling a dice, or simply pick one. Note, that named characters usually have predetermined Warlord Traits and receive them after being nominated as Warlord.

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Disembark
If a unit starts its Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase so long as the model itself has not yet made a Normal Move, an Advance or has Fallen Back that phase.

When a unit disembarks, set it up on the battlefield so that it is wholly within 3" of the TRANSPORT model and not within Engagement Range of any enemy models.

Units that disembark can then act normally (move, shoot, charge, fight, etc.) in the remainder of the turn, but its models count as having moved that turn, even if they are not moved further (i.e. they never count as having Remained Stationary).

  • Units that start their Movement phase embarked in a TRANSPORT can disembark this phase.
  • A unit must disembark before their TRANSPORT moves.
  • Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models.
  • Units that have disembarked count as having moved this turn.

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support

The <CULT> and PSYKER keywords are used in following Genestealer Cults datasheets:

The <CULT> and BIKER keywords are used in following Genestealer Cults datasheets:

Fast Attack

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.

The THE PAUPER PRINCES and CHARACTER keywords are used in following Genestealer Cults datasheets:

© Vyacheslav Maltsev 2013-2021