Genestealer Cults – Locus
This datasheet does not meet the selection criteria (see Settings tab).
3

Locus

NoNAME  M WS BS S T W A Ld Sv
45
Locus
1
45
Locus
6" 2+ 3+ 4 3 4 4 8 5+
A Locus is a single model armed with Locus blades and a Hypermorph tail.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Hypermorph tail
Hypermorph tail
Melee
Melee
User
-1
1
Each time the bearer fights, it can make 1 additional attack with this weapon.
Each time the bearer fights, it can make 1 additional attack with this weapon.
Locus blades
Locus blades
Melee
Melee
User
-3
1
Increase this weapon’s Damage characteristic to 2 if the bearer made a charge move, was charged or performed a Heroic Intervention this turn.
Increase this weapon’s Damage characteristic to 2 if the bearer made a charge move, was charged or performed a Heroic Intervention this turn.
ABILITIES
ABILITIES
Cult Ambush, Unquestioning Loyalty
Unquestioning Bodyguard: Each time a <CULT> CHARACTER model (other than a LOCUS) loses a wound whilst they are within 3" of any friendly <CULT> LOCUSES, you can select one of those LOCUSES to use this ability instead of using the Unquestioning Loyalty ability. If you do, roll a D6; on a 2+ the character does not lose a wound but the selected model suffers 1 mortal wound (you cannot then use the Unquestioning Loyalty ability to avoid this). On a 1, the original model loses the wound as normal.
Neurotraumal Rod: Subtract 1 from the Leadership characteristic of units while they are within 6" of any enemy LOCUSES.
Sudden Strike: In the Charge phase, if this model is within 6" of any enemy units after your opponent has completed all of their charge moves, it can perform a Heroic Intervention. This model can move up to 6" when performing Heroic Interventions, and can choose to move towards the nearest enemy CHARACTER within 6" rather than the nearest enemy model.
Quicksilver Dodge: This model has a 5+ invulnerable save.
Quicksilver Strike: This model always fights first in the Fight phase, even if it did not charge. If the enemy has units that charged, or that have a similar ability, then alternate choosing units to fight with, starting with the player whose turn is taking place.
FACTION KEYWORDS: TYRANIDS, GENESTEALER CULTS, <CULT>
KEYWORDS: INFANTRY, CHARACTER, LOCUS

Datasheet-related Stratagems

2CP

LURK IN THE SHADOWS

Genestealer Cults Stratagem

In dark nooks and crevices the true believers of the cult whisper and skulk, all but invisible to those who approach.

Use this Stratagem at the start of your opponent’s Shooting phase. Select a GENESTEALER CULTS INFANTRY unit from your army that is entirely on or within any terrain feature. Until the end of the phase, enemy models can only shoot that unit if it is the closest enemy unit that is visible to them.
1CP

HYPER-METABOLISM

Genestealer Cults Stratagem

Even the most grievous wounds can be sealed over by those with the alien biology of the Tyranid under their skin.

Use this Stratagem at the start of your Movement phase. Select a GENESTEALER CULTS CHARACTER from your army. That model regains D3 lost wounds.
3CP

A PERFECT AMBUSH

Genestealer Cults Stratagem

The faithful spring the perfect ambush; the foe is greeted with a hail of bullets and a horde of fanatics bearing down upon them.

Use this Stratagem in the Movement phase, immediately after you set up an INFANTRY or BIKER unit from your army that has the Cult Ambush ability on the battlefield. That unit can either make a Normal Move of up to D6" as if it were your Movement phase (even if it has arrived as Reinforcements), or it can shoot with all of its ranged weapons as if it were your Shooting phase (using this Stratagem in your own turn does not prevent that unit from shooting in your Shooting phase or making a charge move in the Charge phase of this turn). You cannot use this Stratagem on a unit that disembarked from a TRANSPORT this turn.
2CP

TELEPATHIC SUMMONS

Genestealer Cults Stratagem

The cult’s kin are drawn from the hidden places of the world with a summons heard in the soul as much as by the ears.

Use this Stratagem at the start of your Psychic phase. Select a <CULT> PSYKER model from your army. That model cannot attempt to manifest any psychic powers this phase. Instead, roll 3D6; you can add one new <CULT> INFANTRY or BIKER unit to your army if it has the Cult Ambush ability and its Power Rating is equal to or less than this roll (otherwise, no new unit is added). That unit is immediately set up on the battlefield anywhere that is more than 9" from any enemy models.
1CP/3CP

GRANDSIRE’S GIFTS

Genestealer Cults Stratagem

The relics taken reverently from the Patriarch’s lair include captured guns, sentient blades and strange biomantic artefacts.

Use this Stratagem before the battle. Your army can have one extra Sacred Relic of the Cult for 1 CP, or two extra sacred Relics of the Cult for 3 CPs. All of the Sacred Relics of the Cult that you include must be different and be given to different GENESTEALER CULTS CHARACTERS. This Stratagem can only be used once per battle.
1CP

VENGEANCE FOR THE MARTYRED

The Pauper Princes Stratagem

The faithful flock of the Pauper Princes go to great lengths to protect their elders and betters – should one of their heroes fall, they will swarm like angered hornets to take their revenge.

Use this Stratagem when an enemy unit destroys a PAUPER PRINCES CHARACTER model from your army. For the remainder of the battle, add 1 to hit rolls for attacks made by friendly PAUPER PRINCES models when they target the enemy unit that destroyed that character.

This datasheet has Elites Battlefield Role. Full list of Genestealer Cults units sharing same Battlefield Role follows:

Hypermorph tail used in following datasheets:

Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.

  • Heroic Intervention: Move up to 3".
  • Must end closer to the closest enemy model.

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.

The <CULT> and CHARACTER keywords are used in following Genestealer Cults datasheets:

Unquestioning Loyalty

So fanatically devoted are Genestealer Cultists that they would die for their masters.

Each time you fail a saving throw for a <CULT> CHARACTER model, and each time a <CULT> CHARACTER model suffers a mortal wound, before inflicting damage check to see if it is within 3" of any friendly <CULT> or BROOD BROTHERS units with this ability. If it is, you can select one of those units and roll a D6; on a 4+ you do not inflict any damage on the character, but one model in the selected unit (your choice) is slain. Otherwise, the character suffers damage as normal.

The LOCUS keyword is used in following Genestealer Cults datasheets:

Elites

The <CULT> and LOCUS keywords are used in following Genestealer Cults datasheets:

Elites
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.

The LOCUS keyword is used in following Genestealer Cults datasheets:

Elites
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.

  • Heroic Intervention: Move up to 3".
  • Must end closer to the closest enemy model.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while performing actions.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Disembark
If a unit starts its Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase so long as the model itself has not yet made a Normal Move, an Advance or has Fallen Back that phase.

When a unit disembarks, set it up on the battlefield so that it is wholly within 3" of the TRANSPORT model and not within Engagement Range of any enemy models.

Units that disembark can then act normally (move, shoot, charge, fight, etc.) in the remainder of the turn, but its models count as having moved that turn, even if they are not moved further (i.e. they never count as having Remained Stationary).

  • Units that start their Movement phase embarked in a TRANSPORT can disembark this phase.
  • A unit must disembark before their TRANSPORT moves.
  • Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models.
  • Units that have disembarked count as having moved this turn.

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support

The <CULT> and PSYKER keywords are used in following Genestealer Cults datasheets:

Manifesting Psychic Powers
The same PSYKER unit cannot attempt to manifest Smite more than once during the same battle round. When you select a PSYKER unit to manifest psychic powers, you select one psychic power that unit knows and attempt to manifest it. With the exception of Smite, you cannot attempt to manifest the same psychic power more than once in the same battle round, even with different PSYKER units.

To manifest the psychic power, you must first pass a Psychic test. The opposing player can then select one of their PSYKER units that is within 24" of the PSYKER unit attempting to manifest the power and attempt to deny that power before its effects are resolved by passing a Deny the Witch test.

So long as the Psychic test was successful and the psychic power was not denied by a successful Deny the Witch test, the psychic power is successfully manifested and its effects, which will be described in the power itself, are then resolved. If the PSYKER unit can attempt to manifest more than one psychic power in its Psychic phase, you can then attempt to manifest those, one at a time, as described above. The number of psychic powers each PSYKER unit can attempt to manifest in its Psychic phase is listed on its datasheet.

  • Select psychic power.
  • You cannot select the same psychic power more than once per battle round, unless that power is Smite.
  • Attempt to manifest the psychic power by taking a Psychic test.
  • The opponent can attempt to deny the psychic power by taking a Deny the Witch test.
  • If successfully manifested, resolve the psychic power’s effects.
  • Select another psychic power.

The <CULT> and BIKER keywords are used in following Genestealer Cults datasheets:

Fast Attack

The BIKER keyword is used in following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.

The THE PAUPER PRINCES and CHARACTER keywords are used in following Genestealer Cults datasheets:

Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
© Vyacheslav Maltsev 2013-2021