Genestealer Cults – Kelermorph
This datasheet does not meet the selection criteria (see Settings tab).
4

Kelermorph

NoNAME  M WS BS S T W A Ld Sv Base
80
Kelermorph (base: 32mm)
1
80
Kelermorph
6" 3+ 2+ 3 3 4 3 8 5+ 32mm
A Kelermorph is a single model armed with three liberator autostubs and a cultist knife.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Liberator autostub
Liberator autostub
12"
Pistol 2
4
-1
2
-
Cultist knife
Cultist knife
Melee
Melee
User
0
1
Each time the bearer fights, it can make 1 additional attack with this weapon.
Each time the bearer fights, it can make 1 additional attack with this weapon.
ABILITIES
ABILITIES
Cult Ambush, Unquestioning Loyalty
Gunslinger: Each time you select a target for a ranged attack made by this model, you can ignore the Look Out, Sir rule. In addition, each time this model hits an enemy with a Pistol weapon, it can immediately make one additional hit roll against that target using the same weapon. These bonus hit rolls cannot themselves generate any further hit rolls.
Heroic Deeds, Heroic Inspiration: If this model kills any enemy models with its ranged weapons, then until the end of the phase, after resolving its attacks, re-roll hit rolls of 1 for attacks made by friendly <CULT> INFANTRY units whilst they are within 6" of this model.
Preternatural Senses: This model has a 5+ invulnerable save.
FACTION KEYWORDS: TYRANIDS, GENESTEALER CULTS, <CULT>
KEYWORDS: INFANTRY, CHARACTER, KELERMORPH

Datasheet-related Stratagems

2CP

LURK IN THE SHADOWS

Genestealer Cults Stratagem

In dark nooks and crevices the true believers of the cult whisper and skulk, all but invisible to those who approach.

Use this Stratagem at the start of your opponent’s Shooting phase. Select a GENESTEALER CULTS INFANTRY unit from your army that is entirely on or within any terrain feature. Until the end of the phase, enemy models can only shoot that unit if it is the closest enemy unit that is visible to them.
1CP

HYPER-METABOLISM

Genestealer Cults Stratagem

Even the most grievous wounds can be sealed over by those with the alien biology of the Tyranid under their skin.

Use this Stratagem at the start of your Movement phase. Select a GENESTEALER CULTS CHARACTER from your army. That model regains D3 lost wounds.
3CP

A PERFECT AMBUSH

Genestealer Cults Stratagem

The faithful spring the perfect ambush; the foe is greeted with a hail of bullets and a horde of fanatics bearing down upon them.

Use this Stratagem in the Movement phase, immediately after you set up an INFANTRY or BIKER unit from your army that has the Cult Ambush ability on the battlefield. That unit can either make a Normal Move of up to D6" as if it were your Movement phase (even if it has arrived as Reinforcements), or it can shoot with all of its ranged weapons as if it were your Shooting phase (using this Stratagem in your own turn does not prevent that unit from shooting in your Shooting phase or making a charge move in the Charge phase of this turn). You cannot use this Stratagem on a unit that disembarked from a TRANSPORT this turn.
2CP

TELEPATHIC SUMMONS

Genestealer Cults Stratagem

The cult’s kin are drawn from the hidden places of the world with a summons heard in the soul as much as by the ears.

Use this Stratagem at the start of your Psychic phase. Select a <CULT> PSYKER model from your army. That model cannot attempt to manifest any psychic powers this phase. Instead, roll 3D6; you can add one new <CULT> INFANTRY or BIKER unit to your army if it has the Cult Ambush ability and its Power Rating is equal to or less than this roll (otherwise, no new unit is added). That unit is immediately set up on the battlefield anywhere that is more than 9" from any enemy models.
1CP/3CP

GRANDSIRE’S GIFTS

Genestealer Cults Stratagem

The relics taken reverently from the Patriarch’s lair include captured guns, sentient blades and strange biomantic artefacts.

Use this Stratagem before the battle. Your army can have one extra Sacred Relic of the Cult for 1 CP, or two extra sacred Relics of the Cult for 3 CPs. All of the Sacred Relics of the Cult that you include must be different and be given to different GENESTEALER CULTS CHARACTERS. This Stratagem can only be used once per battle.
1CP

VENGEANCE FOR THE MARTYRED

The Pauper Princes Stratagem

The faithful flock of the Pauper Princes go to great lengths to protect their elders and betters – should one of their heroes fall, they will swarm like angered hornets to take their revenge.

Use this Stratagem when an enemy unit destroys a PAUPER PRINCES CHARACTER model from your army. For the remainder of the battle, add 1 to hit rolls for attacks made by friendly PAUPER PRINCES models when they target the enemy unit that destroyed that character.

This datasheet has Elites Battlefield Role. Full list of Genestealer Cults units sharing same Battlefield Role follows:

PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.

Cultist knife used in the following datasheets:

Fast Attack

– may take Cultist knife as an option.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.

The BIKER keyword is used in the following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in the following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.

The <CULT> and CHARACTER keywords are used in the following Genestealer Cults datasheets:

Unquestioning Loyalty

So fanatically devoted are Genestealer Cultists that they would die for their masters.

Each time you fail a saving throw for a <CULT> CHARACTER model, and each time a <CULT> CHARACTER model suffers a mortal wound, before inflicting damage check to see if it is within 3" of any friendly <CULT> or BROOD BROTHERS units with this ability. If it is, you can select one of those units and roll a D6; on a 4+ you do not inflict any damage on the character, but one model in the selected unit (your choice) is slain. Otherwise, the character suffers damage as normal.
Look out, Sir
Models cannot target a unit that contains any CHARACTER models with a Wounds characteristic of 9 or less with a ranged weapon while that CHARACTER unit is within 3" of any of the following:
  • A friendly unit that contains 1 or more VEHICLE or MONSTER models with a wounds characteristic of 10 or more.
  • A friendly non-CHARACTER unit that contains 1 or more VEHICLE or MONSTER models.
  • A friendly non-CHARACTER unit that contains 3 or more models.
In all cases, if that CHARACTER unit is both visible to the firing model and it is the closest enemy unit to the firing model, it can be targeted normally. When determining if that CHARACTER unit is the closest enemy unit to the firing model, ignore other enemy units that contain any CHARACTER models with a Wounds characteristics of 9 or less.

  • Cannot shoot at an enemy CHARACTER with 9 or less wounds while it is within 3" of a friendly unit that contains 1 MONSTER, 1 VEHICLE or 3+ other models (excluding CHARACTER models with 9 or less wounds) unless it is the closest target.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The CHARACTER keyword is used in the following Genestealer Cults datasheets:

The BIKER keyword is used in the following Genestealer Cults datasheets:

Fast Attack

The BIKER keyword is used in the following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in the following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Disembark
If a unit starts its Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase so long as the model itself has not yet made a Normal Move, an Advance or has Fallen Back that phase.

When a unit disembarks, set it up on the battlefield so that it is wholly within 3" of the TRANSPORT model and not within Engagement Range of any enemy models.

Units that disembark can then act normally (move, shoot, charge, fight, etc.) in the remainder of the turn, but its models count as having moved that turn, even if they are not moved further (i.e. they never count as having Remained Stationary).

  • Units that start their Movement phase embarked in a TRANSPORT can disembark this phase.
  • A unit must disembark before their TRANSPORT moves.
  • Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models.
  • Units that have disembarked count as having moved this turn.

The TRANSPORT keyword is used in the following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support

The <CULT> and PSYKER keywords are used in the following Genestealer Cults datasheets:

Manifesting Psychic Powers
The same PSYKER unit cannot attempt to manifest Smite more than once during the same battle round. When you select a PSYKER unit to manifest psychic powers, you select one psychic power that unit knows and attempt to manifest it. With the exception of Smite, you cannot attempt to manifest the same psychic power more than once in the same battle round, even with different PSYKER units.

To manifest the psychic power, you must first pass a Psychic test. The opposing player can then select one of their PSYKER units that is within 24" of the PSYKER unit attempting to manifest the power and attempt to deny that power before its effects are resolved by passing a Deny the Witch test.

So long as the Psychic test was successful and the psychic power was not denied by a successful Deny the Witch test, the psychic power is successfully manifested and its effects, which will be described in the power itself, are then resolved. If the PSYKER unit can attempt to manifest more than one psychic power in its Psychic phase, you can then attempt to manifest those, one at a time, as described above. The number of psychic powers each PSYKER unit can attempt to manifest in its Psychic phase is listed on its datasheet.

  • Select psychic power.
  • You cannot select the same psychic power more than once per battle round, unless that power is Smite.
  • Attempt to manifest the psychic power by taking a Psychic test.
  • The opponent can attempt to deny the psychic power by taking a Deny the Witch test.
  • If successfully manifested, resolve the psychic power’s effects.
  • Select another psychic power.

The <CULT> and BIKER keywords are used in the following Genestealer Cults datasheets:

Fast Attack

The BIKER keyword is used in the following Genestealer Cults datasheets:

Fast Attack

The TRANSPORT keyword is used in the following Genestealer Cults datasheets:

Dedicated Transport
Heavy Support
Cult Ambush

Genestealer Cults plan meticulously before rising up against their oppressors, remaining hidden until the moment of ascension arrives.

During deployment, you can set up this unit in ambush instead of on the battlefield. If this unit has the INFANTRY or BIKER keyword, you can either set it up in ambush or underground instead of on the battlefield.

When you set up a unit underground, it can emerge at the end of any of your Movement phases – set the unit up anywhere on the battlefield that is more than 9" from any enemy models.

When you set up a unit in ambush, place one ambush marker anywhere on the battlefield that is wholly within your deployment zone. You will need one ambush marker for each unit that will deploy in this way. If you set up a TRANSPORT model in ambush, you must still tell your opponent what units are embarked within it when it is set up in ambush – do not set up separate ambush markers for units that start the battle embarked within a TRANSPORT model, even if they have the Cult Ambush ability.

Ambush markers are not units and cannot be targeted, attacked or destroyed. When measuring to or from ambush markers, always measure to the centre of the marker. If you are playing a mission that uses Concealed Deployment, the Concealed Deployment rules only apply to units that do not have the Cult Ambush ability. If you are playing a mission that uses Sentries, Sentry models cannot be set up in ambush, even if they have the Cult Ambush ability.

Matched Play: In matched play, units set up in ambush using this rule do not count as being Strategic Reserves or Reinforcement units.

Revealing Ambush Markers
If you have the first turn, you must reveal all of your ambush markers at the start of your Movement phase, one at a time, before moving any units. Each time you reveal an ambush marker, select one unit from your army that you set up in ambush, then set up one model from that unit within 1" of that ambush marker. Then remove that marker before setting up the rest of that model’s unit wholly within 6" of the first model, wholly within your deployment zone and more than 9" from any enemy models (any models that cannot be placed are destroyed). If it is your turn, that unit can still move and shoot normally during the turn it is set up, but if it is a TRANSPORT, units that disembark from it this turn cannot be set up within 9" of any enemy models. Note that unless these units actually move during this Movement phase, they do not count as having moved in their Movement phase for any rules purposes, such as shooting Heavy weapons.

If your opponent has the first turn, then none of their units can be set up or end a move within 9" of any of your ambush markers. At the end of your opponent’s first Movement phase, after they have set up all of their units from reinforcements (if any), reveal all of your ambush markers as described above before continuing with the turn.

This codex comes with 28 Ambush markers that you can use when setting up Genestealer Cults units in ambush. Also included is a 9" range ruler; this is intended to be used when setting up Genestealer Cults units on the battlefield that were set up underground during deployment, helping to ensure no models are placed too close to the enemy.

The THE PAUPER PRINCES and CHARACTER keywords are used in the following Genestealer Cults datasheets:

© Vyacheslav Maltsev 2013-2021