Drukhari – Ur-Ghul
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
15 Ur-Ghul (base: 32mm) |
|||||||||||
| 1 | 15 Ur-Ghul |
8" | 3+ | - | 4 | 3 | 3 | 4 | 4 | 7+ | 32mm |
An Ur-Ghul is a single model which attacks with claws and talons.
* This datasheet is part of the Warhammer Legends range of rules and can be used in any type of play - open, narrative or matched. However Legends units are not updated by GW and not supported by Wahapedia and therefore not recommended for competitive tournaments.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Claws and talons | ||||||
| Claws and talons | Melee | Melee | +1 | -1 | 1 | - |
ABILITIES | |
ABILITIES |
Insensible To Pain: This model has a 5+ invulnerable save. Ferocious Charge: Add 2 to this model’s Attacks characteristic if it charged in the same turn. Court of the Archon: This unit can only be included in a Detachment if that Detachment also includes one or more ARCHON units, and you can only include a maximum of 1 COURT OF THE ARCHON units for each ARCHON unit in that Detachment. This unit does not take up slots in a Detachment. |
| FACTION KEYWORDS: AELDARI, DRUKHARI, | |
| KEYWORDS: INFANTRY, COURT OF THE ARCHON, UR-GHUL | |
Datasheet-related Stratagems
CRUEL DECEPTION1CP/2CP
Drukhari – Battle Tactic Stratagem
Commorrite society is founded upon opportunistic deception.
Use this Stratagem in your Movement phase, when a DRUKHARI unit from your army Falls Back. You can select for this unit to be eligible to shoot this turn or eligible to declare a charge this turn, or both. If you select both, this Stratagem costs 2CP; otherwise, it costs 1CP.
THE GREAT ENEMY1CP
Drukhari – Battle Tactic Stratagem
The Chaos God Slaanesh is reviled by the Aeldari, who hate and despise his followers with a ferocious loathing.
Use this Stratagem in the Fight phase, when a DRUKHARI unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes a melee attack against a SLAANESH unit, you can re-roll the hit roll and you can re-roll wound roll.
LIGHTNING-FAST REACTIONS1CP
Drukhari – Battle Tactic Stratagem
The hyper-fast reflexes of the Drukhari allow them to duck and weave to avoid all but the swiftest enemy strikes.
Use this Stratagem in your opponents Shooting phase or the Fight phase, when a DRUKHARI INFANTRY, DRUKHARI VEHICLE or DRUKHARI BIKER unit from your army (excluding URIEN RAKARTH or a <HAEMONCULUS COVEN> unit) is selected as the target of an attack. Until the end of the phase, each time an attack is made against that unit, subtract 1 from that attack’s hit roll.
HUNT FROM THE SHADOWS1CP
Drukhari – Battle Tactic Stratagem
The denizens of Commorragh use the shadows to their advantage.
Use this Stratagem in your opponent’s Shooting phase, when a DRUKHARI unit from your army that has the benefits of Light Cover is selected as the target of a ranged attack. Until the end of that phase, add an additional 1 to that unit’s saving throws (excluding invulnerable saving throws).
PRAY THEY DON’T TAKE YOU ALIVE1CP
Drukhari – Epic Deed Stratagem
Few armies are able to maintain their mettle when the sounds of their leader’s tortured screams fill the air.
Use this Stratagem in the Fight phase, when an enemy WARLORD unit is destroyed by a melee attack made by a DRUKHARI unit from your army. Until the end of the battle, each time a Combat Attrition test is taken for an enemy unit, subtract 1 from that Combat Attrition test.
AGENTS OF VECT0CP
Kabal of the Black Heart – Strategic Ploy Stratagem
The Supreme Overlord of Commorragh develops countermeasures for every conceivable course of events.
Use this Stratagem after your opponent uses a Stratagem (excluding Command Re-roll). Until the end of the battle, the CP cost your opponent must pay to use that Stratagem again is increased by 1. This Stratagem can only be used once.
WEBWAY PORTAL1CP/3CP
Drukhari – Strategic Ploy Stratagem
By hurling rune-graven orbs into the air, the Drukhari can tear a route into the webway through which more of their kin can pour.
Use this Stratagem before the battle when declaring reserves and transports (if you are playing a mission without this step, use this Stratagem during deployment instead). If you spend 1CP, you can set up one DRUKHARI INFANTRY, BIKER or BEAST unit from your army in the webway instead of placing it on the battlefield. If you spend 3CPs, you can place two DRUKHARI INFANTRY, BIKER or BEAST units in the webway instead.
In the Reinforcements step of one of your Movement phases, you can set up any units in the webway anywhere on the battlefield that is more than 9" away from any enemy models. You can only use this Stratagem once.
In the Reinforcements step of one of your Movement phases, you can set up any units in the webway anywhere on the battlefield that is more than 9" away from any enemy models. You can only use this Stratagem once.
NEVER STATIONARY2CP
Drukhari – Strategic Ploy Stratagem
The Drukhari are masters at using hit-and-run tactics, engaging a target with a flurry of shots before quickly manoeuvring into cover or out of sight.
Use this Stratagem in your Shooting phase after making attacks with a DRUKHARI unit (excluding AIRCRAFT units) from your army. That unit can immediately make a Normal Move of up to 7". Until the end of the turn, that unit is not eligible to declare a charge.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The AELDARI keyword is used in the following Drukhari datasheets:
Elites
Fortifications
The DRUKHARI keyword is used in the following Drukhari datasheets:
Elites
Fortifications
The INFANTRY keyword is used in the following Drukhari datasheets:
Elites
The ARCHON keyword is used in the following Drukhari datasheets:
Fall Back
When a unit Falls Back, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, and when doing so you can move it within Engagement Range of enemy models, but it cannot end its move within Engagement Range of any enemy models – if it cannot do this then it cannot Fall Back. A unit cannot declare a charge in the same turn that it Fell Back. A unit cannot shoot or attempt to manifest a psychic power in the same turn that it Fell Back unless it is TITANIC.- Fall Back: Models move up to M".
- Units that Fall Back cannot charge this turn.
- Units that Fall Back cannot shoot or manifest psychic powers this turn unless they are TITANIC.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:
| ||||||||||||||
If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The DRUKHARI and INFANTRY keywords are used in the following Drukhari datasheets:
Elites
The DRUKHARI and VEHICLE keywords are used in the following Drukhari datasheets:
The DRUKHARI and BIKER keywords are used in the following Drukhari datasheets:
The URIEN RAKARTH keyword is used in the following Drukhari datasheets:
The <HAEMONCULUS COVEN> keyword is used in the following Drukhari datasheets:
Troops
Elites
Light Cover
When an attack made with a ranged weapon wounds a model that is receiving the benefits of cover from this terrain feature, add 1 to the saving throw made against that attack (invulnerable saving throws are not affected).- +1 to saving throws against ranged weapons.
- Invulnerable saving throws unaffected.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Combat Attrition Tests
If a unit fails a Morale test, then after the first model has fled the unit, you must take Combat Attrition tests. To do so, roll one D6 for each remaining model in that unit, subtracting 1 from the result if the unit is below Half-strength; for each result of 1, one additional model flees that unit. You decide which models from your unit flee – those models are removed from play and count as having been destroyed, but they never trigger any rules that are used when a model is destroyed.- Combat Attrition tests: Roll one D6 for each remaining model in unit; for each 1, one additional model flees.
- Subtract 1 from Combat Attrition tests if unit is below Half-strength.
COMMAND RE-ROLL1CP
Core Stratagem
Use this Stratagem after you have made a hit roll, a wound roll, a damage roll, a saving throw, an Advance roll, a charge roll, a Psychic test, a Deny the Witch test or you have rolled the dice to determine the number of attacks made by a weapon. Re-roll that roll, test or saving throw.
The DRUKHARI and BEAST keywords are used in the following Drukhari datasheets:
Command Points
The starting number of CPs each player starts with for Battle-forging their army depends on the size of the battle you are playing. This is usually defined in the mission pack that is being played, but if one is not presented in the mission pack, use the following table. Note that the total Power Level is based on the combined power of all the models used in the battle (so the combined Power Level of both your and your opponent's armies). If you are using a game that uses points values, then the points limit is the maximum points limit per side.
| ||||||||||||||||||||||||
- Starting number of Command points varies with battle size.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Army List
Datasheets collatedElites
Fortifications
This datasheet has Elites Battlefield Role. Full list of Drukhari units sharing same Battlefield Role follows:
The COURT OF THE ARCHON keyword is used in the following Drukhari datasheets:
The COURT OF THE ARCHON keyword is used in the following Drukhari datasheets:
